柔性直流输电系统中,直流故障的分析与判别是柔直系统中亟待解决的重要问题。为了更好地分析故障特征,推导出一种多端柔性直流输电网(modular multilevel converter-high voltage direct current,MMC-MTDC)的母线侧简化电路故障计算方法...柔性直流输电系统中,直流故障的分析与判别是柔直系统中亟待解决的重要问题。为了更好地分析故障特征,推导出一种多端柔性直流输电网(modular multilevel converter-high voltage direct current,MMC-MTDC)的母线侧简化电路故障计算方法,并分析了母线侧单极接地故障和极间短路故障的故障特征,在此基础上设计了一种适用于多端柔性直流输电网的故障判别方案和保护措施。该判别方案通过故障启动判据、故障区域判别和故障类型判别3个模块进行故障判定,采用了故障电压瞬时跌落值与系统电压之差及故障线路电流值作故障特征量,整套判别方案不受其他元件参数、故障位置等因素的影响,将Spearman相关性分析与传统电气故障区域判别相结合,准确判定系统区内外故障的同时,解决了故障区域判别中受线路各参数干扰导致误判的问题,仿真测试验证了本保护方案的可行性。展开更多
The development of high-voltage direct current gas-insulated switchgear assemblies(DC GIS)of rated voltages up to±550 kV has been completed.DC GIS provide a compact technical solution with a high functional densi...The development of high-voltage direct current gas-insulated switchgear assemblies(DC GIS)of rated voltages up to±550 kV has been completed.DC GIS provide a compact technical solution with a high functional density,optimized for projects with limited space as in offshore HVDC converter platforms,onshore HVDC converter stations and transition stations between different transmission media.Up to now,no standards for testing of gas-insulated DC systems are available,although pre-standardization work is in progress within CIGRE.Some tests can be performed as required in AC GIS standards.Special aspects of DC voltage stress,like the electric field distribution of insulators influenced by the accumulation of electrical charge carriers and the operation-related inhomogeneous temperature distribution,must be considered by additional electric and thermoelectric tests.For DC GIS,the experience of long-term performance is limited today.Although ageing is expected to be of lower importance,tests are recommended.This contribution summarizes the physical and technical background to design and develop compact DC switchgear assemblies using gas-insulated technology.It explains the developed modules of the substation and gives an overview of the performed tests.Furthermore,it provides an insight in the on-going standardization activities and describes applications in converter and transition stations,showing its space-saving characteristics.展开更多
The DC-DC converters are widely used in photovoltaic generating systems as an interface between PV module and the load. These converters must be chosen to be able to match the maximum power point (MPP) of PV module wh...The DC-DC converters are widely used in photovoltaic generating systems as an interface between PV module and the load. These converters must be chosen to be able to match the maximum power point (MPP) of PV module when climatic conditions change with different resistive load values. So DC-DC converters must be used with MPPT controller in order to reduce losses in the global PV system. This article focuses on the effect of climatic conditions on design of two components (inductance, capacitance) for three topologies of DC-DC converters commonly used in PV systems. When climatic conditions change, the boundary of inductance and capacitance parameters of DC-DC converter will change. These two parameters must be properly sized to achieve optimal efficiency for each converter. The design optimization is based on two principles: 1) for a steady-state operation in a continuous conduction mode, the inductance value for all choppers must be greater than the maximum value of boundary inductance, and 2) in order to limit the output voltage ripple of DC-DC converter below a desired value, the filter capacitance must be larger than the maximum value of boundary capacitance.展开更多
分布式控制系统(Distributed Control System,DCS)通过计算机实现对工业生产现场的分散操作与集中管理。随着电力需求的增加,人们对发电机组自动化水平提出了更高要求。DCS在火电机组中应用广泛,能确保机组运行稳定安全,提高发电企业的...分布式控制系统(Distributed Control System,DCS)通过计算机实现对工业生产现场的分散操作与集中管理。随着电力需求的增加,人们对发电机组自动化水平提出了更高要求。DCS在火电机组中应用广泛,能确保机组运行稳定安全,提高发电企业的市场竞争力。随着电力客户需求的变化,原有DCS需要优化改造以适应电厂发电机组生产运行的要求。因此,文章重点介绍DCS的特点,分析GE9FA燃机电厂DCS运行中存在的问题,提出了DCS电源改造优化措施。展开更多
This paper proposes the new cascaded series parallel design for improved dynamic performance of DC-DC buck boost converters by a new Sliding Mode Control (SMC) method. The converter is controlled using Sliding Mode Co...This paper proposes the new cascaded series parallel design for improved dynamic performance of DC-DC buck boost converters by a new Sliding Mode Control (SMC) method. The converter is controlled using Sliding Mode Control method that utilizes the converter’s duty ratio to determine the skidding surface. System modeling and simulation results are presented. The results also showed an improved overall performance over typical PID controller, and there was no overshoot or settling time, tracking the desired output nicely. Improved converter performance and robustness were expected.展开更多
文摘柔性直流输电系统中,直流故障的分析与判别是柔直系统中亟待解决的重要问题。为了更好地分析故障特征,推导出一种多端柔性直流输电网(modular multilevel converter-high voltage direct current,MMC-MTDC)的母线侧简化电路故障计算方法,并分析了母线侧单极接地故障和极间短路故障的故障特征,在此基础上设计了一种适用于多端柔性直流输电网的故障判别方案和保护措施。该判别方案通过故障启动判据、故障区域判别和故障类型判别3个模块进行故障判定,采用了故障电压瞬时跌落值与系统电压之差及故障线路电流值作故障特征量,整套判别方案不受其他元件参数、故障位置等因素的影响,将Spearman相关性分析与传统电气故障区域判别相结合,准确判定系统区内外故障的同时,解决了故障区域判别中受线路各参数干扰导致误判的问题,仿真测试验证了本保护方案的可行性。
基金supported by the Federal Ministry for Economic Affairs and Energy, Germany (FKZ:03ET7511C)the Bavarian Ministry of Economic Affairs, Regional Development and Energy (FKZ:IET-1208-0018)
文摘The development of high-voltage direct current gas-insulated switchgear assemblies(DC GIS)of rated voltages up to±550 kV has been completed.DC GIS provide a compact technical solution with a high functional density,optimized for projects with limited space as in offshore HVDC converter platforms,onshore HVDC converter stations and transition stations between different transmission media.Up to now,no standards for testing of gas-insulated DC systems are available,although pre-standardization work is in progress within CIGRE.Some tests can be performed as required in AC GIS standards.Special aspects of DC voltage stress,like the electric field distribution of insulators influenced by the accumulation of electrical charge carriers and the operation-related inhomogeneous temperature distribution,must be considered by additional electric and thermoelectric tests.For DC GIS,the experience of long-term performance is limited today.Although ageing is expected to be of lower importance,tests are recommended.This contribution summarizes the physical and technical background to design and develop compact DC switchgear assemblies using gas-insulated technology.It explains the developed modules of the substation and gives an overview of the performed tests.Furthermore,it provides an insight in the on-going standardization activities and describes applications in converter and transition stations,showing its space-saving characteristics.
文摘The DC-DC converters are widely used in photovoltaic generating systems as an interface between PV module and the load. These converters must be chosen to be able to match the maximum power point (MPP) of PV module when climatic conditions change with different resistive load values. So DC-DC converters must be used with MPPT controller in order to reduce losses in the global PV system. This article focuses on the effect of climatic conditions on design of two components (inductance, capacitance) for three topologies of DC-DC converters commonly used in PV systems. When climatic conditions change, the boundary of inductance and capacitance parameters of DC-DC converter will change. These two parameters must be properly sized to achieve optimal efficiency for each converter. The design optimization is based on two principles: 1) for a steady-state operation in a continuous conduction mode, the inductance value for all choppers must be greater than the maximum value of boundary inductance, and 2) in order to limit the output voltage ripple of DC-DC converter below a desired value, the filter capacitance must be larger than the maximum value of boundary capacitance.
文摘分布式控制系统(Distributed Control System,DCS)通过计算机实现对工业生产现场的分散操作与集中管理。随着电力需求的增加,人们对发电机组自动化水平提出了更高要求。DCS在火电机组中应用广泛,能确保机组运行稳定安全,提高发电企业的市场竞争力。随着电力客户需求的变化,原有DCS需要优化改造以适应电厂发电机组生产运行的要求。因此,文章重点介绍DCS的特点,分析GE9FA燃机电厂DCS运行中存在的问题,提出了DCS电源改造优化措施。
文摘This paper proposes the new cascaded series parallel design for improved dynamic performance of DC-DC buck boost converters by a new Sliding Mode Control (SMC) method. The converter is controlled using Sliding Mode Control method that utilizes the converter’s duty ratio to determine the skidding surface. System modeling and simulation results are presented. The results also showed an improved overall performance over typical PID controller, and there was no overshoot or settling time, tracking the desired output nicely. Improved converter performance and robustness were expected.
