基于机载多角度InSAR技术的复杂地形高精度DEM重建方法

干涉合成孔径雷达(Interferomtric Synthetic Aperture Radar,InSAR)是全天时、全天候获取三维地表信息重要的技术手段。机载InSAR系统具有机动灵活、多角度获取数据的优势,可以高效率、高精度获取数字高程模型(Digital Elevation Model,DEM)数据。但是,在地形复杂区域,InSAR侧视成像易在地形陡峭区域形成较大范围的阴影和严重的叠掩现象,阴影和叠掩区域在SAR图像上体现为信息的丢失,从而导致DEM数据大面积无效数据的存在,严重影响DEM数据的质量及应用。针对这一问题,本文提出了基于机载多角度InSAR技术的复杂地形高精度DEM重建方法,基于考虑地形起伏的机载多角度InSAR数据获取任务规划设计,最大程度的避免阴影和叠掩导致的无效数据;基于高精度InSAR数据处理,保证每个角度DEM数据精度的高度一致性;基于快速多角度DSM数据融合与滤波处理,实现多角度InSAR体制复杂地形DEM高精度重建。本文以四川省西部山区大坡度、非连续等复杂地形为例,基于本文提出的方法,利用3个角度InSAR数据融合处理,生成了高精度DEM数据,试验结果表明,本文提出的方法获取复杂地形DEM数据高程均方根误差为0.6 m,同时,数据有效率大于99%。

Digital Elevation Modeling不确定性对地形参数影响的空间分布特征分析

Digital elevation modeling(DEM)是基础地理数据之一,从其中可以提取多种地形参数,DEM不确定性对提取的地形参数具有一定的影响.选择坡度、上坡集水面积和地形指数作为研究对象,在DEM不确定性模拟的基础上,研究DEM不确定性对地形参数影响的空间分布特征.研究发现:DEM不确定性对坡度的影响没有明显的空间分布特征,对上坡集水面积和地形指数具有明显的空间分布特征.DEM不确定性对上坡集水面积影响的空间分布特征为:总体上分布均匀,在河道及附近、水库区域影响大于其它地区;DEM不确定性对地形指数影响的空间分布特征为:总体上分布均匀,在河道及附近、水库、平地地区影响大于其它地区.不同DEM不确定性程度对地形参数影响的空间分布特征相似.

Determining topographic shielding from digital elevation models for cosmogenic nuclide analysis: a GIS model for discrete sample sites

Topographic shielding(TS) is an important factor in cosmogenic nuclide surface exposure dating. The development of geographic information systems(GIS) and the availability of digital elevation models(DEMs) make it possible to derive this factor directly from a DEM. Most available GIS models derive the TS factors for an area(all cells in a DEM) without the consideration of surface conditions of individual sites, such as the strike, dip,and height above ground, into the calculation. This paper presents a new GIS model to derive the TS factors for discrete sample sites. This model uses the Skyline and Skyline Graph functions in ArcGIS to extract the set of azimuth and elevation angles of topographic obstructions around each site from a DEM(considering the sample height above ground)and then incorporates the strike and dip information of the sample surface to derive the TS factor. All processing tools and steps are streamlined in ArcGIS modelbuilder and this model can be run like a standard ArcGIS geoprocessing tool. It provides an easy and user-friendly means to derive the TS factors for discrete samples based on a DEM and the measured strike, dip and sample height for each site.

Effect of digital elevation models on monitoring slope displacements in open-pit mine by differential interferometry synthetic aperture radar

Displacement monitoring in open-pit mines is one of the important tasks for safe management of mining processes.Differential interferometric synthetic aperture radar(DInSAR),mounted on an artificial satellite,has the potential to be a cost-effective method for monitoring surface displacements over extensive areas,such as open-pit mines.DInSAR requires the ground surface elevation data in the process of its analysis as a digital elevation model(DEM).However,since the topography of the ground surface in open-pit mines changes largely due to excavations,measurement errors can occur due to insufficient information on the elevation of mining areas.In this paper,effect of different elevation models on the accuracy of the displacement monitoring results by DInSAR is investigated at a limestone quarry.In addition,validity of the DInSAR results using an appropriate DEM is examined by comparing them with the results obtained by global positioning system(GPS)monitoring conducted for three years at the same limestone quarry.It is found that the uncertainty of DEMs induces large errors in the displacement monitoring results if the baseline length of the satellites between the master and the slave data is longer than a few hundred meters.Comparing the monitoring results of DInSAR and GPS,the root mean square error(RMSE)of the discrepancy between the two sets of results is less than 10 mm if an appropriate DEM,considering the excavation processes,is used.It is proven that DInSAR can be applied for monitoring the displacements of mine slopes with centimeter-level accuracy.

Determining Topographic Shielding from Digital Elevation Models for Cosmogenic Nuclide Analysis:a GIS Approach and Field Validation

Topographic shielding of cosmic radiation flux is a key parameter in using cosmogenic nuclides to determine surface exposure ages or erosion rates.Traditionally,this parameter is measured in the field and uncertainty and/or inconsistency may exist among different investigators.This paper provides an ArcGIS python code to determine topographic shielding factors using digital elevation models(DEMs).This code can be imported into ArcGIS as a geoprocessing tool with a user-friendly graphical interface.The DEM-derived parameters using this method were validated with field measurements in central Tian Shan.Results indicate that DEM-derived shielding factors are consistent with field-measured values.It provides a valuable tool to save fieldwork efforts and has the potential to provide consistent results for different regions in the world to facilitate the comparison of cosmogenic nuclide results.

Uncertainty of Slope Length Derived from Digital Elevation Models of the Loess Plateau, China

Although many studies have investigated slope gradient uncertainty derived from Digital Elevation Models(DEMs), the research concerning slope length uncertainty is far from mature. This discrepancy affects the availability and accuracy of soil erosion as well as hydrological modeling. This study investigates the formation and distribution of existing errors and uncertainties in slope length derivation based on 5-m resolution DEMs of the Loess Plateau in the middle of China. The slope length accuracy in three different landform areas is examined to analyse algorithm effects. The experiments indicate that the accuracy of the flat test area is lower than that of the rougher areas. The value from the specific contributing area(SCA) method is greater than the cumulative slope length(CSL), and the differences between these two methods arise from the shape of the upslope area. The variation of mean slope length derived from various DEM resolutions and landforms. The slope length accuracy decreases with increasing grid size and terrain complexity at the six test sites. A regression model is built to express the relationship of mean slope length with DEM resolution less than 85 m and terrain complexity represented by gully density. The results support the understanding of the slope length accuracy, thereby aiding in the effective evaluation of the modeling effect of surface process.

Extraction and Analysis of Gully Head of Loess Plateau in China Based on Digital Elevation Model

In China′s Loess Plateau area, gully head is the most active zone of a drainage system in gully areas. The differentiation of loess gully head follows geospatial patterns and reflects the process of the loess landform development and evolution of its drainage system to some extent. In this study, the geomorphic meaning, basic characteristics, morphological structure and the basic types of loess gully heads were systematically analysed. Then, the loess gully head′s conceptual model was established, and an extraction method based on Digital Elevation Model(DEM) for loess gully head features and elements was proposed. Through analysing the achieved statistics of loess gully head features, loess gully heads have apparently similar and different characteristics depending on the different loess landforms where they are found. The loess head characteristics reflect their growth period and evolution tendency to a certain degree, and they indirectly represent evolutionary mechanisms. In addition, the loess gully developmental stages and the evolutionary processes can be deduced by using loess gully head characteristics. This study is of great significance for development and improvement of the theoretical system for describing loess gully landforms.

Re-delineating mountainous areas with three topographic parameters in Mainland Southeast Asia using ASTER global digital elevation model data

Tropical mountainous areas not only provide substantial carbon storage and play an important role in global biological diversity, but also provide basic livelihood for a large number of poor ethnic minorities. However, there is no unified and explicit definition for mountainous areas. The local elevation range(LER) is a crucial structural parameter for delineating mountainous areas. However, current LER products are limited by the subjective selection of an optimum statistical window or coarser spatial resolution of topographical data. In this study, we presented an approach using thresholds for three topographic parameters, elevation, slope, and LER, derived from the Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model(ASTER GDEM) to redelineate the vast mountainous areas of mainland Southeast Asia(MSEA). The mean change-point analysis method was applied to determine the optimum statistical window of the 1 arc second(approximately 30 m)-resolution GDEM LER. The results showed that: First, the optimum statistical window is 38 × 38 cell units(width × height) in a rectangular neighborhood, or an area of about 1.30 km^2 for calculating GDEM LER in MSEA. Second, the LER of more than 80% of the area ranges from 30 m to 499 m in MSEA. The LERs in the northern and northwestern MSEA are greater than their counterparts in the south and east. Third, the area of the re-delineated mountainous areas was 83.52 × 10~4 km^2, about 38.71% of the total area. Spatially, the mountainous areas are mainly distributed in the north and northeast of MSEA. The re-delineated 30-m resolution map of the mountainous areas will serve as a topographical dataset for monitoring mountainrelated land surface changes in MSEA. The parameter-modified mountain extraction procedure can be expanded to delineate global mountainous areas.

Curvature derived from LiDAR digital elevation models as simple indicators of debris-flow susceptibility

To mitigate the damage caused by debris flows resulting from heavy precipitation and to aid in evacuation plan preparation, areas at risk should be mapped on a scale appropriate for affected individuals and communities. We tested the effectiveness of simply identifying debris-flow hazards through automated derivation of surface curvatures using LiDAR digital elevation models. We achieved useful correspondence between plan curvatures and areas of existing debris-flow damage in two localities in Japan using the analysis of digital elevation models(DEMs). We found that plan curvatures derived from 10 m DEMs may be useful to indicate areas that are susceptible to debris flow in mountainous areas. In residential areas located on gentle sloping debris flow fans, the greatest damage to houses was found to be located in the elongated depressions that are connected to mountain stream valleys. Plan curvaturederived from 5 m DEM was the most sensitive indicators for susceptibility to debris flows.

Beach Morphology and Sediment Budget Variability Based on High Quality Digital Elevation Models Derived from Field Data Sets

The morphological and volumetric changes of a sandy beach were investigated through a series of two- monthly filed surveys carried out aver a 2-year period from April 2005 to January 2007. This paper discuss the ability of 3-D digital elevation models (DEMs) derived from high accurate data to assess and quantify beach morphodynamics in relation with wave forcing. The methodology and data acquisition are described and consist mainly in the production of interpolated DEMs from which a variety of representations can be made, including as elevation change maps, two-dimensional cross-sections of the beach, calculation of net volume. The results of the analysis highlight seasonal changes in beach morphology due to variations in wave energy. This behavior is characterized by beach erosion and bar decay under high-energy waves and net accretion and bar formation during relatively fair weather conditions. The sand budgets adjustments show that the loss of volume in the winter months is compensated for by accumulation to the beach during summer. This trend suggests that there is a mechanism which controls the beach evolution. The correlation between beach changes and wave energy variations highlights a net relation between them. The results from this in- vestigation state the value of DEMs utilized and demonstrate the efficiency of the 3-D approach employed here to assess the erosion and accretion patterns which would not be visualized using 2-D profiles.

基于三元DEM的露天煤矿封闭壳状包络体素建模研究

传统地质模型受自身结构性质和布尔运算效率的局限,限制了采矿模型的生成,无法满足露天矿大规模物料规划问题的需求。针对上述问题,对开采体块段模型及采矿模型进行了定义,并提出了一种基于三元DEM的露天煤矿封闭壳状包络体素快速建模方法,即煤岩模型的顶面、底面和侧面DEM建模,三元DEM经固化后即可生成煤岩体对应的封闭壳状包络体素模型。该模型介于实体模型和块体模型之间,能够保障算量精度,同时具有较高的布尔运算效率,可以现实定点、定向的尺寸和结构剖切,在传统算量地模的基础上,通过特定的结构定义,丰富剥采程序和工艺参数等技术指标属性,定制专属的采矿模型,更好地服务于露天矿物料流规划、采剥生产计划动态优化等问题。

Comparative study and error analysis of digital elevation model interpolations

Researchers in P.R.China commonly create triangulate irregular networks(TINs) from contours and then convert TINs into digital elevation models(DEMs).However,the DEM produced by this method can not precisely describe and simulate key hydrological features such as rivers and drainage borders.Taking a hilly region in southwestern China as a research area and using ArcGISTM software,we analyzed the errors of different interpolations to obtain distributions of the errors and precisions of different algorithms and to provide references for DEM productions.The results show that different interpolation errors satisfy normal distributions,and large error exists near the structure line of the terrain.Furthermore,the results also show that the precision of a DEM interpolated with the Australian National University digital elevation model(ANUDEM) is higher than that interpolated with TIN.The DEM interpolated with TIN is acceptable for generating DEMs in the hilly region of southwestern China.

Facets of Uncertainty in Digital Elevation and Slope Modeling

This paper investigates the differences that result from applying different approaches to uncertainty modeling and reports an experimental examining error estimation and propagation in elevation and slope, with the latter derived from the former. It is confirmed that significant differences exist between uncertainty descriptors, and propagation of uncertainty to end products is immensely affected by the specification of source uncertainty.

Managing Soil Erosion Potential by Integrating Digital Elevation Models with the Southern China's Revised Universal Soil Loss Equation——A Case Study for the West Lake Scenic Spots Area of Hangzhou,China

In China,many scenic and tourism areas are suffering from the urbanization that results from physical development of tourism projects,leading to the removal of the vegetative cover,the creation of areas impermeable to water,in-stream modifications,and other problems. In this paper,the risk of soil erosion and its ecological risks in the West Lake Scenic Spots (WLSS) area were quantitatively evaluated by integrating the revised universal soil loss equation (RUSLE) with a digital elevation model (DEM) and geographical information system (GIS) software. The standard RUSLE factors were modified to account for local climatic and topographic characteristics reflected in the DEM maps,and for the soil types and vegetation cover types. An interface was created between the Arcinfo software and RUSLE so that the level of soil erosion and its ecological risk in the WLSS area could be mapped immediately once the model factors were defined for the area. The results from an analysis using the Arcinfo-RUSLE interface showed that the risk value in 93 % of the expanding western part of the WLSS area was moderate or more severe and the soil erosion risk in this area was thus large compared with that in the rest of the area. This paper mainly aimed to increase the awareness of the soil erosion risk in urbanizing areas and suggest that the local governments should consider the probable ecological risk resulting from soil erosion when enlarging and developing tourism areas.

LAN Tool: A GIS Tool for the Improvement of Digital Elevation Models Using Drainage Network Attributes

Digital Elevation Models (DEMs) are constructed using altitude point data and various interpolation techniques. The quality and accuracy of DEMs depend on data point density and the interpolation technique used. Usually however, altitude point data especially in plain areas do not provide realistic DEMs, mainly due to errors produced as a result of the interpolation technique, resulting in imprecise topographic representation of the landscape. Such inconsistencies, which are mainly in the form of surface depressions, are especially crucial when DEMs are used as input to hydrologic modeling for impact studies, as they have a negative impact on the model’s performance. This study presents a Geographical Information System (GIS) tool, named LAN (Line Attribute Network), for the improvement of DEM construction techniques and their spatial accuracy, using drainage network attributes. The developed tool does not alter the interpolation technique, but provides higher point density in areas where most DEM problems occur, such as lowland areas or places where artificial topographic features exist. Application of the LAN tool in two test sites showed that it provides considerable DEM improvement.

Erosion processes in karst landscapes of the Russian plain northern taiga,based on digital elevation modeling

This paper considers the problems of the potential development of erosion processes in the natural landscapes of northern taiga in the Russian plain. It is considered that in forest ecosystems, erosion processes are slow and are weakly reflected in the terrain. However, the situation changes radically if the vegetation cover integrity is violated, which is inevitable with the modern methods of developing northern territories. Furthermore, global changes in average annual temperatures and the occurrence of karst processes may be the reason behind the development of erosion processes. The authors suggest a method for determining territories with a varying occurrence probability of erosional processes, based on digital elevation modelling. The territory of the Pinezhsky Nature Reserve(Arkhangelsk region) was chosen as the test plot. Direct field studies were previously used to detect exogenous geological processes in this territory. The authors were the first to suggest digital elevation modelling as a method that allows determining the potential danger of erosion in karst landscapes of the northern taiga. The geomorphometric studies resulted in the determination of areas with the greatest and lowest occurrence probability of erosion processes in the Pinezhsky Nature Reserve. It was established that the most significant erosion type was linear erosion, represented by incised river valleys and karst ravines. Sheet erosion is less significant and occurs as sinkholes, local declines, and chasms over the valleys of subterranean rivers.

基于DEM数据的相对高程计算方法研究

提出一种基于DEM数据、适用于复杂地形区域的相对高程因子的计算方法。首先利用DEM数据划分地形单元,然后在每个地形单元内确定相对基准面,最后分区域计算相对高程。并选择河北省承德市丰宁县为研究区开展实验验证,研究表明,该方法能够方便、科学地计算出相对高程值,并为复杂地形区域相对高程提取及数字高程模型研究提供一种新的方法与借鉴。

无人机载LiDAR点云密度对DEM精度的影响分析

无人机载LiDAR点云数据是目前生产DEM的重要数据源。为进一步提升DEM构建效率,本文选取平地和山地两类地形作为试验区,利用基于不规则三角网的点云抽稀算法,对滤波处理后的地面点云数据分别按照80%、60%、40%等7种地面点保留率进行抽稀,并用平均误差(ME)、标准差(SD)、均方根误差(RMSE)3个指标,对不同抽稀比例下生产的DEM成果进行综合精度评定。结果表明:(1)平地地面点云密度达2点/m^(2),山地地面点云密度达9点/m^(2)时,生产的0.5 m格网间距的DEM精度优于0.05 m;(2)随着地面点云密度的增加,DEM精度水平逐渐趋于稳定,当地面点云密度抽稀到1点/m^(2)时,DEM精度快速下降。针对无人机载LiDAR点云数据进行大范围工程化DEM生产任务,该研究结论对降低数据获取成本、提升DEM生产效率具有一定的指导和借鉴意义。

不同地形条件下ASTER GDEM高程精度分析

文章以1∶2000比例尺地形图高程点数据为高程参考真值,以中国典型高海拔山区和低海拔平原地区为研究区域,分析ASTER GDEM模型的高程精度。ASTER GDEM模型误差整体呈现正态分布,模型高程值和参考高程值强相关;高海拔地区ASTER GDEM模型高程平均误差为-4.1 m,均方根误差为13.7 m,与标称精度基本一;低海拔地区模型高程平均误差为2.7 m,均方根误差为5.4 m,远高于标称精度;模型在不同海拔区间的平均误差无明显趋势,标准差整体随海拔的升高而增大;地形起伏越大,模型误差越大。

A COM-based Framework for Management,Analysis and Visualization of Large Scope Digital Elevation Models

This paper presents a component object model (COM) based framework for managing, analyzing and visualizing massive multi-scale digital elevation models (DEMs). The framework consists of a data management component (DMC), which is based on RDBMS/ORDBMS, a data analysis component (DAC) and a data render component (DRC). DMC can manage massive multi-scale data expressed at various reference frames within a pyramid database and can support fast access to data at variable resolution. DAC integrates many useful applied analytic functions whose results can be overlaid with the 3D scene rendered by DRC. DRC provides view-dependent data paging with the support of the underlying DMC and organizes the potential visible data at different levels into rendering.