Modified method for extraction of watershed boundary with digital elevation modeling

Boundary extraction of watershed is an important step in forest landscape research. The boundary of the upriver wa-tershed of the Hunhe River in the sub-alpine Qingyuan County of eastern Liaoning Province, China was extracted by digital elevation modeling (DEM) data in ArcInfo8.1. Remote sensing image of the corresponding region was applied to help modify its copy according to Enhanced Thematic Mapper (ETM) image抯 profuse geomorphological structure information. Both the DEM-dependent boundary and modified copy were overlapped with county map and drainage network map to visually check the effects of result. Overlap of county map suggested a nice extraction of the boundary line since the two layers matched precisely, which indicated the DEM-dependent boundary by program was effective and precise. Further upload of drainage network showed discrepancies between the boundary and the drainage network. Altogether, there were three sections of the extraction result that needed to correct. Compared with this extraction boundary, the modified boundary had a better match to the drainage network as well as to the county map. Comprehensive analysis demonstrated that the program extraction has generally fine precision in position and excels the digitized result by hand. The errors of the DEM-dependant extraction are due to the fact that it is difficult for program to recognize sections of complex landform especially altered by human activities, but these errors are discernable and adjustable because the spatial resolution of ETM image is less than that of DEM. This study result proved that application of remote sensing information could help obtain better result when DEM method is used in extraction of watershed boundary.

Extraction and Analysis of Gully Head of Loess Plateau in China Based on Digital Elevation Model

In China′s Loess Plateau area, gully head is the most active zone of a drainage system in gully areas. The differentiation of loess gully head follows geospatial patterns and reflects the process of the loess landform development and evolution of its drainage system to some extent. In this study, the geomorphic meaning, basic characteristics, morphological structure and the basic types of loess gully heads were systematically analysed. Then, the loess gully head′s conceptual model was established, and an extraction method based on Digital Elevation Model(DEM) for loess gully head features and elements was proposed. Through analysing the achieved statistics of loess gully head features, loess gully heads have apparently similar and different characteristics depending on the different loess landforms where they are found. The loess head characteristics reflect their growth period and evolution tendency to a certain degree, and they indirectly represent evolutionary mechanisms. In addition, the loess gully developmental stages and the evolutionary processes can be deduced by using loess gully head characteristics. This study is of great significance for development and improvement of the theoretical system for describing loess gully landforms.

Determining Topographic Shielding from Digital Elevation Models for Cosmogenic Nuclide Analysis:a GIS Approach and Field Validation

Topographic shielding of cosmic radiation flux is a key parameter in using cosmogenic nuclides to determine surface exposure ages or erosion rates. Traditionally, this parameter is measured in the field and uncertainty and/or inconsistency may exist among different investigators. This paper provides an ArcGIS python code to determine topographic shielding factors using digital elevation models （DEMs）. This code can be imported into ArcGIS as a geoprocessing tool with a user-friendly graphical interface. The DEM-derived parameters using this method were validated with field measurements in central Tian Shan. Results indicate that DEM-derived shielding factors are consistent with field-measured values. It provides a valuable tool to save fieldwork efforts and has the potential to provide consistent results for different regions in the world to facilitate the comparison of cosmogenie nuclide results.

A Case Study of Using External DEM in InSAR DEM Generation

Synthetic aperture radar interferometry (InSAR) has been used as an innovative technique for digital elevation model (DEM) and topographic map generation. In this paper, external DEMs are used for InSAR DEM generation to reduce the errors in data processing. The DEMs generated from repeat-pass InSAR are compared. For steep slopes and severe changes in topography, phase unwrapping quality can be improved by subtracting the phase calculated from an external DEM. It is affirmative that the absolute height accuracy of the InSAR DEM is improved by using external DEM. The data processing was undertaken without the use of ground control points and other manual operation.

Simulation of astronomical solar radiation over Yellow River Basin based on DEM

Based on the developed distributed model for calculating astronomical solar radiation (ASR), monthly ASR with a resolution of 1 km×1 km for the rugged terrains of Yellow River Basin was calculated, with DEM data as the general characterization of terrain. This model gives an all-sided consideration on factors that influence the ASR. Results suggest that (1) Annual ASR has a progressive decrease trend from south to north; (2) the magnitude order of seasonal ASR is: summer>spring>autumn>winter; (3) topographical factors have robust effect on the spatial distribution of ASR, particularly in winter when a lower sun elevation angle exists; (4) the ASR of slopes with a sunny exposure is generally 2 or 3 times that of slopes with a shading exposure and the extreme difference of ASR for different terrains is over 10 times in January; (5) the spatial differences of ASR are relatively small in summer when a higher sun elevation angle exists and the extreme difference of ASR for different terrains is only 16% in July; and (6) the sequence of topographical influence strength is: winter>autumn>spring>summer.

Design Bistatic Interferometric DEM Generation Algorithm and Its Theoretical Accuracy Analysis for LuTan-1 Satellites

LuTan-1(LT-1)is a constellation with two full-polarization L-band radar satellites designed by China,and the first satellite was scheduled to be launched in December 2021 and the second one in January 2022.The LT-1 will be operated for deformation monitoring in repeat-pass mode,and for DEM generation in bistatic mode,improving self-sufficiency of SAR data for the field of geology,earthquake,disaster reduction,geomatics,forestry and so on.In this paper,we focused on designing an algorithm for interferometric DEM generation using LT-1 bistatic satellites.The basic principle,main error sources and errors control of the DEM generation algorithm of LT-1 were systematically analyzed.The experiment results demonstrated that:①The implemented algorithm had rigorous resolution with a theoretic accuracy better than 0.03 m for DEM generation.②The errors in satellite velocity and Doppler centroid had no obvious effect on DEM accuracy and they could be neglected.While the errors in position,baseline,slant range and interferometric phase had a significant effect on DEM accuracy.And the DEM error caused by baseline error was dominated,followed by the slant range error,interferometric phase error and satellite position error.③To obtain an expected DEM accuracy of 2 m,the baseline error must be strictly controlled and its accuracy shall be 1.0 mm or better for Cross-Track and Normal-Direction component,respectively.And the slant range error and interferometric phase error shall be reasonably controlled.The research results were of great significance for accurately grasping the accuracy of LT-1 data products and their errors control,and could provide a scientific auxiliary basis for LT-1 in promoting global SAR technology progress and the generation of high-precision basic geographic data.

Effect of digital elevation models on monitoring slope displacements in open-pit mine by differential interferometry synthetic aperture radar

Displacement monitoring in open-pit mines is one of the important tasks for safe management of mining processes.Differential interferometric synthetic aperture radar(DInSAR),mounted on an artificial satellite,has the potential to be a cost-effective method for monitoring surface displacements over extensive areas,such as open-pit mines.DInSAR requires the ground surface elevation data in the process of its analysis as a digital elevation model(DEM).However,since the topography of the ground surface in open-pit mines changes largely due to excavations,measurement errors can occur due to insufficient information on the elevation of mining areas.In this paper,effect of different elevation models on the accuracy of the displacement monitoring results by DInSAR is investigated at a limestone quarry.In addition,validity of the DInSAR results using an appropriate DEM is examined by comparing them with the results obtained by global positioning system(GPS)monitoring conducted for three years at the same limestone quarry.It is found that the uncertainty of DEMs induces large errors in the displacement monitoring results if the baseline length of the satellites between the master and the slave data is longer than a few hundred meters.Comparing the monitoring results of DInSAR and GPS,the root mean square error(RMSE)of the discrepancy between the two sets of results is less than 10 mm if an appropriate DEM,considering the excavation processes,is used.It is proven that DInSAR can be applied for monitoring the displacements of mine slopes with centimeter-level accuracy.

Modelling of piping collapses and gully headcut landforms: Evaluating topographic variables from different types of DEM

The geomorphic studies are extremely dependent on the quality and spatial resolution of digital elevation model(DEM)data.The unique terrain characteristics of a particular landscape are derived from DEM,which are responsible for initiation and development of ephemeral gullies.As the topographic features of an area significantly influences on the erosive power of the water flow,it is an important task the extraction of terrain features from DEM to properly research gully erosion.Alongside,topography is highly correlated with other geo-environmental factors i.e.geology,climate,soil types,vegetation density and floristic composition,runoff generation,which ultimately influences on gully occurrences.Therefore,terrain morphometric attributes derived from DEM data are used in spatial prediction of gully erosion susceptibility(GES)mapping.In this study,remote sensing-Geographic information system(GIS)techniques coupled with machine learning(ML)methods has been used for GES mapping in the parts of Semnan province,Iran.Current research focuses on the comparison of predicted GES result by using three types of DEM i.e.Advanced Land Observation satellite(ALOS),ALOS World 3D-30 m(AW3D30)and Advanced Space borne Thermal Emission and Reflection Radiometer(ASTER)in different resolutions.For further progress of our research work,here we have used thirteen suitable geo-environmental gully erosion conditioning factors(GECFs)based on the multi-collinearity analysis.ML methods of conditional inference forests(Cforest),Cubist model and Elastic net model have been chosen for modelling GES accordingly.Variable’s importance of GECFs was measured through sensitivity analysis and result show that elevation is the most important factor for occurrences of gullies in the three aforementioned ML methods(Cforest=21.4,Cubist=19.65 and Elastic net=17.08),followed by lithology and slope.Validation of the model’s result was performed through area under curve(AUC)and other statistical indices.The validation result of AUC has shown that Cforest is the most appropriate model for predicting the GES assessment in three different DEMs(AUC value of Cforest in ALOS DEM is 0.994,AW3D30 DEM is 0.989 and ASTER DEM is 0.982)used in this study,followed by elastic net and cubist model.The output result of GES maps will be used by decision-makers for sustainable development of degraded land in this study area.

An Object-based Approach for Two-level Gully Feature Mapping Using High-resolution DEM and Imagery： A Case Study on Hilly Loess Plateau Region, China

Gully feature mapping is an indispensable prerequisite for the motioning and control of gully erosion which is a widespread natural hazard. The increasing availability of high-resolution Digital Elevation Model(DEM) and remote sensing imagery, combined with developed object-based methods enables automatic gully feature mapping. But still few studies have specifically focused on gully feature mapping on different scales. In this study, an object-based approach to two-level gully feature mapping, including gully-affected areas and bank gullies, was developed and tested on 1-m DEM and Worldview-3 imagery of a catchment in the Chinese Loess Plateau. The methodology includes a sequence of data preparation, image segmentation, metric calculation, and random forest based classification. The results of the two-level mapping were based on a random forest model after investigating the effects of feature selection and class-imbalance problem. Results show that the segmentation strategy adopted in this paper which considers the topographic information and optimal parameter combination can improve the segmentation results. The distribution of the gully-affected area is closely related to topographic information, however, the spectral features are more dominant for bank gully mapping. The highest overall accuracy of the gully-affected area mapping was 93.06% with four topographic features. The highest overall accuracy of bank gully mapping is 78.5% when all features are adopted. The proposed approach is a creditable option for hierarchical mapping of gully feature information, which is suitable for the application in hily Loess Plateau region.

Estimation of Ground Deformation Caused by the Earthquake (M7.2) in Japan,2008,from the Geomorphic Image Analysis of High Resolution LiDAR DEMs

In this study, a new method for quantitative and efficient measurement for the ground surface movement was developed. The feature of this technique is to identify geomorphic characteristics by image matching analysis, using the intelligent images made from high resolution DEM(Digital Elevation Model). This method is useful to extract the small ground displacement where the surface shape was not intensely deformed.

Uncertainty of Slope Length Derived from Digital Elevation Models of the Loess Plateau, China

Although many studies have investigated slope gradient uncertainty derived from Digital Elevation Models(DEMs), the research concerning slope length uncertainty is far from mature. This discrepancy affects the availability and accuracy of soil erosion as well as hydrological modeling. This study investigates the formation and distribution of existing errors and uncertainties in slope length derivation based on 5-m resolution DEMs of the Loess Plateau in the middle of China. The slope length accuracy in three different landform areas is examined to analyse algorithm effects. The experiments indicate that the accuracy of the flat test area is lower than that of the rougher areas. The value from the specific contributing area(SCA) method is greater than the cumulative slope length(CSL), and the differences between these two methods arise from the shape of the upslope area. The variation of mean slope length derived from various DEM resolutions and landforms. The slope length accuracy decreases with increasing grid size and terrain complexity at the six test sites. A regression model is built to express the relationship of mean slope length with DEM resolution less than 85 m and terrain complexity represented by gully density. The results support the understanding of the slope length accuracy, thereby aiding in the effective evaluation of the modeling effect of surface process.

Facets of Uncertainty in Digital Elevation and Slope Modeling

This paper investigates the differences that result from applying different approaches to uncertainty modeling and reports an experimental examining error estimation and propagation in elevation and slope, with the latter derived from the former. It is confirmed that significant differences exist between uncertainty descriptors, and propagation of uncertainty to end products is immensely affected by the specification of source uncertainty.

Landform Planation Index Extracted from DEMs： A Case Study in Ordos Platform of China

Planation surface, a surface that is almost flat, is a kind of low-relief landforms. Planation surface is the consequence of the denudation and planation processes under a tectonic stable condition. The quantitative expression of the characteristics of planation surface plays a key role in reconstructing and describing the evolutionary process of landforms. In this study, Landform Planation Index(LPI), a new terrain derivative, was proposed to quantify the characteristics of planation surface. The LPIs were calculated based on the summit surfaces formed according to the clustering results of peaks. Ten typical areas in the Ordos Platform located in the central part of the Loess Plateau of China are chosen as the test areas for investigating their planation characteristics with the LPI. The experimental results indicate that the LPI can be effectively used to quantify the characteristics of planation surfaces. In addition, the LPI can be further used to depict the patterns of spatial differentiation in the Ordos Platform. Although the present Ordos Platform area is full of the high-density gullies, its planation characteristics is found to be well preserved. Furthermore, the characteristics of the planation surfaces can also reflect the original morphology of the Ordos Platform before the loess dusts deposition process evolved in this area. The statistical results of the LPI show that there is a gradually increasing tendency along with the increasing of slope gradient of summit surface. It indicates that the characteristics of planation surfaces vary among test areas with different landforms. These findings help to deepen the understanding of planation characteristics of the loess landform and its underlying paleotopography. Results of this study can be also served as an important theoretical reference value for revealing the evolutionary process of loess landform.

Comparative study and error analysis of digital elevation model interpolations

Researchers in P.R.China commonly create triangulate irregular networks(TINs) from contours and then convert TINs into digital elevation models(DEMs).However,the DEM produced by this method can not precisely describe and simulate key hydrological features such as rivers and drainage borders.Taking a hilly region in southwestern China as a research area and using ArcGISTM software,we analyzed the errors of different interpolations to obtain distributions of the errors and precisions of different algorithms and to provide references for DEM productions.The results show that different interpolation errors satisfy normal distributions,and large error exists near the structure line of the terrain.Furthermore,the results also show that the precision of a DEM interpolated with the Australian National University digital elevation model(ANUDEM) is higher than that interpolated with TIN.The DEM interpolated with TIN is acceptable for generating DEMs in the hilly region of southwestern China.

Aspect in Topography to Enhance Fine-detailed Landform Element Extraction on High-resolution DEM

The value of the high-resolution data lies in the high-precision information discovery.The fine-detailed landform element extraction is thus the basis of high-fidelity application of the high-resolution digital elevation models(DEMs).However,the results of landform element extraction generated by classical methods might be ungrounded on high-resolution DEMs.This paper presents our research on using the aspect to reinforce the applicability and robustness of the classical approaches in landform element extraction.First,according to the research of pattern recognition,we assume that aspect-enhanced landform representation is robust to rotation,scaling and affine variance.To testify the role of aspect,we respectively integrated the aspect into three classical approaches:mean curvaturebased fuzzy classification,elevation-based feature descriptor,and object-based segmentation.In the experiment,based on four types of high-resolution DEMs(1 m,2 m,4 m and 8 m),we compare each classical approaches and their corresponding aspect-enhanced approaches based on extracting the rims of two craters having different landforms,and the ridgelines and valleylines of a region covered by few vegetables and man-made buildings.In comparison to the results generated by curvature-based fuzzy classification,the aspect enhanced curvature-based fuzzy classification can effectively filter a number of noises outperforms the curvature-based one.Otherwise,the aspect-enhanced feature descriptor can detect more landform elements than the elevation-based feature descriptor.Moreover,the aspect-based segmentation can detect the main structure of landform,while the boundaries segmented by classical approaches are messing and meaningless.The systematic experiments on meter-level resolution DEMs proved that the aspect in topography could effectively to improve the classical method-system,including fuzzy-based classification,feature descriptors-based detection and object-based segmentation.The value of aspect is significantly great to be worthy of attentions in landform representation.

Design flood of ungauged basins based on DEM

In this paper,the northern mountainous area of Fuzhou City which is an ungauged basin has been taken for example to discuss the method of design flood calculation by means of combining the DEM(digital elevation model) and the Xin'anjiang Model(three components).The problem of estimating the parameters of the runoff model has been solved by using the parameters of the reference station.In the conflux calculation,the isochrones are obtained by DEM which helps to avoid the cumbersome work of drawing them on the map.With the establishment of the digital elevation model throughout the country,it is practically significant to use it in the hydrological estimation.

The J_2 invariant relative configuration of spaceborne SAR interferometer for digital elevation measurement

A 3-craft formation configuration is proposed to perform the digital elevation model （DEM） for the distributed spacebome interferometric synthetic aperture radar （InSAR）, and it is optimized by the modified ant colony algorithm to have the best compatibility with J2 invariant orbits created by differential correction algorithm. The configuration has succeeded in assigning the across-track baseline to vary periodically and with its mean value equal to the optimal baseline determined by the relative height measurement accuracy. The required relationship between crafts＇ magnitudes and phases is formulated for the general case of interferometry measure from non-orthographic and non-lateral view. The J2 invariant configurations created by differential correction algorithm are employed to investigate their compatibility with the required configuration. The colony algorithm is applied to search the optimal configuration holding the near-constant across-track baseline under the J2 perturbation, and the absolute height measurement accuracy is preferable as expected.

The variation in basal channels and basal melt rates of Pine Island Ice Shelf

In recent years,there has been a significant acceleration in the thinning,calving and retreat of the Pine Island Ice Shelf(PIIS).The basal channels,results of enhanced basal melting,have the potential to significantly impact the stability of the PIIS.In this study,we used a variety of remote sensing data,including Landsat,REMA DEM,ICESat-1 and ICESat-2 satellite altimetry observations,and Ice Bridge airborne measurements,to study the spatiotemporal changes in the basal channels from 2003 to 2020 and basal melt rate from 2010 to 2017 of the PIIS under the Eulerian framework.We found that the basal channels are highly developed in the PIIS,with a total length exceeding 450 km.Most of the basal channels are ocean-sourced or groundingline-sourced basal channels,caused by the rapid melting under the ice shelf or near the groundingline.A raised seabed prevented warm water intrusion into the eastern branch of the PIIS,resulting in a lower basal melt rate in that area.In contrast,a deepsea trough facilitates warm seawater into the mainstream and the western branch of the PIIS,resulting in a higher basal melt rate in the main-stream,and the surface elevation changes above the basal channels of the mainstream and western branch are more significant.The El Ni?o event in 2015–2016 possibly slowed down the basal melting of the PIIS by modulating wind field,surface sea temperature and depth seawater temperature.Ocean and atmospheric changes were driven by El Ni?o,which can further explain and confirm the changes in the basal melting of the PIIS.

A classification method of building structures based on multi-feature fusion of UAV remote sensing images

In order to improve the accuracy of building structure identification using remote sensing images,a building structure classification method based on multi-feature fusion of UAV remote sensing image is proposed in this paper.Three identification approaches of remote sensing images are integrated in this method:object-oriented,texture feature,and digital elevation based on DSM and DEM.So RGB threshold classification method is used to classify the identification results.The accuracy of building structure classification based on each feature and the multi-feature fusion are compared and analyzed.The results show that the building structure classification method is feasible and can accurately identify the structures in large-area remote sensing images.

Characteristics and influencing factors of proximity distance index on the northern Shaanxi Loess Plateau in China

Topographic feature points and lines are the framework of topography,and their spatial distance relationship is an breakthrough in the study of topographical geometry,internal structure and development level.Proximity distance(PD)is an indicator to describe the distance between the gully source point(GSP)and the watershed boundary.In the upstream catchment area,PDs can be expressed by the streamline proximity distance(SPD),as well as by the horizontal proximity distance(HPD)and the vertical proximity distance(VPD)in the horizontal and vertical dimensions,respectively.The series of indicators(e.g.,SPD,HPD and VPD)are important for quantifying the geomorphological development process of a loess basin because of the headward erosion of loess gullies.In this study,the digital elevation model data with 5 m resolution and a digital topographic analysis method are used for the statistical analyses of the SPD,VPD and HPD in 50 sample areas of 6 geomorphic types in the Loess Plateau of northern Shaanxi.The spatial characteristics and the influencing factors are also analysed.Results show that:1)Central tendencies for the HPDs and the VPDs for the whole study area and the six typical loess landforms are evident.2)Spatial patterns of the HPDs and the VPDs exhibit evident trends and zonal distributions over the whole study area.3)The HPDs have a strong positive correlation with gully density(GD)and hypsometric integral.The VPDs also correlates with GD to an extent.Vegetation cover,mean annual precipitation and loess thickness have stronger effects on the VPD than on the HPD.