The effects of biaxial tensile pre-strain on the forming limit of DP590 high-strength steel under high strain rate were investigated. The stress-strain curves of DP590 steel sheet under the biaxial tensile of differen...The effects of biaxial tensile pre-strain on the forming limit of DP590 high-strength steel under high strain rate were investigated. The stress-strain curves of DP590 steel sheet under the biaxial tensile of different load ratios were obtained. The forming limit diagrams（FLDs） of DP590 steel sheet under biaxial tensile pre-strain and electromagnetic hybrid forming were established. Results showed that the biaxial tensile pre-strain had significant effects on the formability of DP590 steel. The pre-strain in a certain range improved the forming limit of DP590 steel under high rate, and the forming limit increased with the pre-strain. The prestrain in the same direction of high rate increased the forming limit of the final deformation under complex strain paths conditions, but the pre-strain in the vertical direction decreased the minor strain under the high strain rate.展开更多
运用超声波水浸聚焦入射法对1.5 mm的DP590双相钢单面点焊接头进行超声C扫描成像检测,分析不同焊接电流下的超声C扫图像特征及超声C扫描图像中不同区域对应的A扫信号的变化规律,并对点焊接头进行拉伸-剪切试验,测试接头的力学性能。结...运用超声波水浸聚焦入射法对1.5 mm的DP590双相钢单面点焊接头进行超声C扫描成像检测,分析不同焊接电流下的超声C扫图像特征及超声C扫描图像中不同区域对应的A扫信号的变化规律,并对点焊接头进行拉伸-剪切试验,测试接头的力学性能。结果表明:通过观察超声C扫描与超声A扫信号的变化,能够很好地观察点焊接头的内部形貌特征,检测到焊接缺陷的位置与大小;随着焊接电流的逐渐增大(12.5~14.5 k A),接头熔核直径呈递增趋势,对应的失效载荷均值从5549.5 N增加到9258.49 N;当焊接电流增加到15 k A时,接头的熔核直径增大,但由于焊接飞溅的产生,接头的失效载荷和能量吸收值都呈递减趋势。展开更多
基金Funded by the National Natural Science Foundation of China(Nos.51205298 and 51475345)the China Postdoctoral Science Foundation(No.2014M552096)the Open Fund Project of State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology(No.P2015-01)
文摘The effects of biaxial tensile pre-strain on the forming limit of DP590 high-strength steel under high strain rate were investigated. The stress-strain curves of DP590 steel sheet under the biaxial tensile of different load ratios were obtained. The forming limit diagrams（FLDs） of DP590 steel sheet under biaxial tensile pre-strain and electromagnetic hybrid forming were established. Results showed that the biaxial tensile pre-strain had significant effects on the formability of DP590 steel. The pre-strain in a certain range improved the forming limit of DP590 steel under high rate, and the forming limit increased with the pre-strain. The prestrain in the same direction of high rate increased the forming limit of the final deformation under complex strain paths conditions, but the pre-strain in the vertical direction decreased the minor strain under the high strain rate.
文摘运用超声波水浸聚焦入射法对1.5 mm的DP590双相钢单面点焊接头进行超声C扫描成像检测,分析不同焊接电流下的超声C扫图像特征及超声C扫描图像中不同区域对应的A扫信号的变化规律,并对点焊接头进行拉伸-剪切试验,测试接头的力学性能。结果表明:通过观察超声C扫描与超声A扫信号的变化,能够很好地观察点焊接头的内部形貌特征,检测到焊接缺陷的位置与大小;随着焊接电流的逐渐增大(12.5~14.5 k A),接头熔核直径呈递增趋势,对应的失效载荷均值从5549.5 N增加到9258.49 N;当焊接电流增加到15 k A时,接头的熔核直径增大,但由于焊接飞溅的产生,接头的失效载荷和能量吸收值都呈递减趋势。
