Block piezoelectric ceramics(PZTs)are often used in impact igniters to provide activation energy for electric initiators.Under the action of strong impact stress,PZTs release electric energy accompanied by crack initi...Block piezoelectric ceramics(PZTs)are often used in impact igniters to provide activation energy for electric initiators.Under the action of strong impact stress,PZTs release electric energy accompanied by crack initiation,propagation and crushing.At present,the electrical output performance of PZTs in projectile is usually calculated by quasi-static piezoelectric equation without considering the dynamic effect caused by strong impact and the influence of crack propagation on material properties.So the ignition parameters are always not accurately predicted.To tackle this,a PZT dynamic damage constitutive model considering crack propagation is established based on the dynamic impact test and the crack propagation theory of brittle materials.The model is then embedded into the ABAQUS subroutine and used to simulate the electromechanical response of the impact igniter during the impact of a small caliber projectile on the target.Meanwhile,the experiments of projectile with impact igniter impact on the target are carried out.The comparison between experimental and numerical simulation results show that the established dynamic damage model can effectively predict the dynamic electromechanical response of PZTs in the missile service environment.展开更多
To investigate the degradation mechanism of static tensile mechanical behaviors of marble containing dynamic damage,multiple impact loading tests were performed on the disc marble samples,and then static Brazilian tes...To investigate the degradation mechanism of static tensile mechanical behaviors of marble containing dynamic damage,multiple impact loading tests were performed on the disc marble samples,and then static Brazilian tests were conducted for the damaged samples.Besides,coupling modeling technology of finite difference method(FDM)—discrete element method(DEM)was used to carry out the numerical investigation.The results show that after multiple impacts,more white patches appear on the surface,and some microcracks,macro-fractures as well as pulverized grains are found by optical microscopic.The static tensile strength decreases with the increase of the dynamic damage variable characterized by the ultrasonic wave velocity of sample.The interaction between grains in the damaged sample becomes intense in the subsequent static loading process,causing a relatively large strain.The volume of the fragments falling off around the loading points becomes larger as impact number increases.As the dynamic damage increases,the absorbed energy of sample during the static loading first decreases and then tends to be stable.Both the stress concentration and the breakage of the force chains are the root causes of the degradation of the static tensile strength.展开更多
The study concentrates mainly on the development of failure process incomposite rock mass. By use of acoustic emission (AE), convergence inspection, pressure monitoring,level measurement techniques and the modem signa...The study concentrates mainly on the development of failure process incomposite rock mass. By use of acoustic emission (AE), convergence inspection, pressure monitoring,level measurement techniques and the modem signal analysis technology, as well as scan electronmicroscopy (SEM) experiment, various aspects of nonlinear dynamic damage of composite rock masssurrounding the transport roadway in Linglong gold mine are discussed. According to the monitoringresults, the stability of the rock mass can be synthetically evaluated, and the intrinsic relationbetween the damage and the characteristic parameters of acoustic emission can be determined. Thelocation of the damage of rock mass can also be detected based on the acoustic emission couplemonitoring signals. Finally, the key factors which influence the stability of the transport roadwaysupported by composite hard rock materials are found out.展开更多
Due to the developments of computer science and technology in recent years,computer models and numerical simulations for large and complicated structures can be done.Among the vast information and results obtained fro...Due to the developments of computer science and technology in recent years,computer models and numerical simulations for large and complicated structures can be done.Among the vast information and results obtained from the analysis and simulations,the damage performance is of great importance since this damage might cause enormous losses for society and humanity,notably in cases of severe damage occurring.One of the most effective tools to handle the results about the damage performance of the structure is the damage index(DI)together with the damage states,which are used to correlate the damage indices with the damage that occurred in the actual structures.Numbers of damage indices proposed and developed rely on the fact that the damage causes noticeable changes in the structural and dynamic properties of the structural components or the whole structure.Therefore,this study presents a comprehensive review of the damage assessment of Reinforced Concrete(RC)structures.It presents step by step the development of the damage indices that are most widely used to estimate the performance of structural components in the structure and subsequently assess the damage degree of such these structures either based on the structural properties or dynamic properties of the structure.Also,several damage states have been introduced to estimate the performance level of the structure.Finally,case studies,methodologies,and applications on the damage assessment of RC structures are reviewed and presented.展开更多
On the basis of shock induced experiments and the ultrasonic tests of the damaged rocks, the damage evolution relation between the attenuation coefficient of sound wave and the damage dissipated energy is described. ...On the basis of shock induced experiments and the ultrasonic tests of the damaged rocks, the damage evolution relation between the attenuation coefficient of sound wave and the damage dissipated energy is described. Based on the TCK and RDA models, a damage model which connects the shock compression and tensile damage is established. And then the damage model is implemented in LS DYNA3D dynamic nonlinear program. Numerical simulation of deep hole blasting of groove is studied by use of the damage model proposed. The rock damage evolution process and the distributing rules of stress field under the explosion load are described well fairly, which provides the theory basis for the engineering blasting design.展开更多
Our study explored the dynamic changes in andthe relationship between the DNA damage marker8-hydroxy-2'-deoxyguanosine (8-OHdG) and theDNA repair marker 8-hydroxyguanine DNAglycosidase 1 (hOGG1) according to the ...Our study explored the dynamic changes in andthe relationship between the DNA damage marker8-hydroxy-2'-deoxyguanosine (8-OHdG) and theDNA repair marker 8-hydroxyguanine DNAglycosidase 1 (hOGG1) according to the length ofoccupational employment in nickel smeltingworkers. One hundred forty nickel-exposedsmelting workers and 140 age-matched unexposedoffice workers were selected from the Jinchangcohort. The 8-OHdG levels in smelting workers wassignificantly higher than in office workers (Z=-8.688,P〈0.05) and the 8-OHdG levels among nickelsmelting workers in the 10-14 y employment lengthcategory was significantly higher than among allpeers. The hOGG1 levels among smelting workerswere significantly lower than those of non-exposedworkers (Z=-8.948, P〈0.05). There were significantdifferences between employment length andhOGG1 levels, with subjects employed in nickelsmelting for 10-14 y showing the highest levels ofhOGG1. Correlation analysis showed positivecorrelations between 8-OHdG and hOGG1 levels(r=0.413; P〈0.01). DNA damage was increased withemployment length among nickel smelting workersand was related to the inhibition of hOGG1 repaircapacity.展开更多
Following a small-scale wedge failure at Yukon Zinc's Wolverine Mine in Yukon, Canada, a vibration monitoring program was added to the existing rockbolt pull testing regime. The failure in the 1150 drift occurred aft...Following a small-scale wedge failure at Yukon Zinc's Wolverine Mine in Yukon, Canada, a vibration monitoring program was added to the existing rockbolt pull testing regime. The failure in the 1150 drift occurred after numerous successive blasts in an adjacent tunnel had loosened friction bolts passing through an unmapped fault. Analysis of blasting vibration revealed that support integrity is not compromised unless there is a geological structure to act as a failure plane. The peak particle velocity(PPV) rarely exceeded 250 mm/s with a frequency larger than 50 Hz. As expected, blasting more competent rock resulted in higher PPVs. In such cases, reducing the round length from 3.5 m to 2.0 m was an effective means of limiting potential rock mass and support damage.展开更多
By using the technique of the split Hopkinson pressure bar( SHPB),impact tests at different stress wavelengths( 0. 8-2. 0 m) and strain rates( 20-120 s^(-1)) were conducted to study the dynamic mechanical prop...By using the technique of the split Hopkinson pressure bar( SHPB),impact tests at different stress wavelengths( 0. 8-2. 0 m) and strain rates( 20-120 s^(-1)) were conducted to study the dynamic mechanical properties and damage accumulation evolution lawof granite. Test results showthat the dynamic compressive strength and strain rate of granite have a significantly exponential correlation;the relationship between peak strain and strain rate is approximately linear,and the increase of wavelengths generally makes the level of peak strain uplift. The multiple-impacts test at a lowstrain rate indicates that at the same wavelength,the cumulative damage of granite shows an exponential increasing form with the increase of strain rate; when keeping the increase of strain rate constant and increasing the stress wavelength,the damage accumulation effect of granite is intensified and still shows an exponential increasing form; under the effect of multiple impacts,the damage development trend of granite is similar overall,but the increase rate is accelerating. Therefore the damage evolution model was established on the basis of the exponential function while the physical meaning of parameters in the model was determined. The model can reflect the effect of the wave parameters and multiple impacts. The validity of the model and the physical meaning of the parameters were verified by the test,which further offer a reference for correlational research and engineering application for the granite.展开更多
Selecting bridging agents properly is a critical factor in designing non-damaging or low-damaging drill-in fluids. Historically, Abrams' rule has been used for this purpose. However, Abrams' rule only addresses the ...Selecting bridging agents properly is a critical factor in designing non-damaging or low-damaging drill-in fluids. Historically, Abrams' rule has been used for this purpose. However, Abrams' rule only addresses the size of particle required to initiate a bridge. The rule does not give an optimum size nor an ideal packing sequence for minimizing fluid invasion and optimizing sealing. This paper elaborates an ideal packing approach to solving the sealing problem by sealing pores with different sizes, especially those large pores which usually make dominant contribution to permeability and thereby effectively preventing the solids and filtrate of drill-in fluids from invading into formations, compared with the conventionally used techniques. Practical software has been developed to optimize the blending proportion of several bridging agents, so as to achieve ideal packing effectiveness. The method and its use in selecting the best blending proportion of several bridging agents are also discussed in this paper. A carefully designed drill-in fluid by using the ideal packing technique (named the IPT fluid) for offshore drilling operations at the Weizhou Oilfield, Nanhai West Company, CNOOC is presented. The near 100% return permeabilities from the dynamic damage tests using reservoir cores demonstrated the excellent bridging effect provided by this drill-in fluid.展开更多
Regenerative medicine has rapidly developed over the past decade and created new opportunities to repair or replace tissue or organ function lost because of congenital defects,age,diseases,or serious damage(Cheng et a...Regenerative medicine has rapidly developed over the past decade and created new opportunities to repair or replace tissue or organ function lost because of congenital defects,age,diseases,or serious damage(Cheng et al.,2016a;Cheng et al.,2016b).Regenerative medicine strategies include the transplantation of bioactive factors,stem cells,or biomaterials,even the induced regeneration in a de novo,depending on the application(Fu,2014a;Huang and Fu,展开更多
基金supported by the National Natural Science Foundation of China(Grant No.12172232)the project of Key Laboratory of Impact and Safety Engineering(Ningbo University,China)+1 种基金Ministry of Education(CJ202206)supported by the scientific research support plan of introducing high-level talents from Shenyang Ligong University。
文摘Block piezoelectric ceramics(PZTs)are often used in impact igniters to provide activation energy for electric initiators.Under the action of strong impact stress,PZTs release electric energy accompanied by crack initiation,propagation and crushing.At present,the electrical output performance of PZTs in projectile is usually calculated by quasi-static piezoelectric equation without considering the dynamic effect caused by strong impact and the influence of crack propagation on material properties.So the ignition parameters are always not accurately predicted.To tackle this,a PZT dynamic damage constitutive model considering crack propagation is established based on the dynamic impact test and the crack propagation theory of brittle materials.The model is then embedded into the ABAQUS subroutine and used to simulate the electromechanical response of the impact igniter during the impact of a small caliber projectile on the target.Meanwhile,the experiments of projectile with impact igniter impact on the target are carried out.The comparison between experimental and numerical simulation results show that the established dynamic damage model can effectively predict the dynamic electromechanical response of PZTs in the missile service environment.
基金financial support of the International Science and Technology Cooperation Plan of Jiangsu Province,China(No.BZ2020066)the National Natural Science Foundation of China(Nos.52179118,42077240 and 52074269)。
文摘To investigate the degradation mechanism of static tensile mechanical behaviors of marble containing dynamic damage,multiple impact loading tests were performed on the disc marble samples,and then static Brazilian tests were conducted for the damaged samples.Besides,coupling modeling technology of finite difference method(FDM)—discrete element method(DEM)was used to carry out the numerical investigation.The results show that after multiple impacts,more white patches appear on the surface,and some microcracks,macro-fractures as well as pulverized grains are found by optical microscopic.The static tensile strength decreases with the increase of the dynamic damage variable characterized by the ultrasonic wave velocity of sample.The interaction between grains in the damaged sample becomes intense in the subsequent static loading process,causing a relatively large strain.The volume of the fragments falling off around the loading points becomes larger as impact number increases.As the dynamic damage increases,the absorbed energy of sample during the static loading first decreases and then tends to be stable.Both the stress concentration and the breakage of the force chains are the root causes of the degradation of the static tensile strength.
基金This work was financially supported by the National Natural Science Foundation of China, No.50074002.
文摘The study concentrates mainly on the development of failure process incomposite rock mass. By use of acoustic emission (AE), convergence inspection, pressure monitoring,level measurement techniques and the modem signal analysis technology, as well as scan electronmicroscopy (SEM) experiment, various aspects of nonlinear dynamic damage of composite rock masssurrounding the transport roadway in Linglong gold mine are discussed. According to the monitoringresults, the stability of the rock mass can be synthetically evaluated, and the intrinsic relationbetween the damage and the characteristic parameters of acoustic emission can be determined. Thelocation of the damage of rock mass can also be detected based on the acoustic emission couplemonitoring signals. Finally, the key factors which influence the stability of the transport roadwaysupported by composite hard rock materials are found out.
基金This work was supported by the National Natural Science Foundation of China(Grant No.52078361)the Innovation Program of the Shanghai Municipal Education Commission(Grant No.2017-01-07-00-07-E00006).
文摘Due to the developments of computer science and technology in recent years,computer models and numerical simulations for large and complicated structures can be done.Among the vast information and results obtained from the analysis and simulations,the damage performance is of great importance since this damage might cause enormous losses for society and humanity,notably in cases of severe damage occurring.One of the most effective tools to handle the results about the damage performance of the structure is the damage index(DI)together with the damage states,which are used to correlate the damage indices with the damage that occurred in the actual structures.Numbers of damage indices proposed and developed rely on the fact that the damage causes noticeable changes in the structural and dynamic properties of the structural components or the whole structure.Therefore,this study presents a comprehensive review of the damage assessment of Reinforced Concrete(RC)structures.It presents step by step the development of the damage indices that are most widely used to estimate the performance of structural components in the structure and subsequently assess the damage degree of such these structures either based on the structural properties or dynamic properties of the structure.Also,several damage states have been introduced to estimate the performance level of the structure.Finally,case studies,methodologies,and applications on the damage assessment of RC structures are reviewed and presented.
文摘On the basis of shock induced experiments and the ultrasonic tests of the damaged rocks, the damage evolution relation between the attenuation coefficient of sound wave and the damage dissipated energy is described. Based on the TCK and RDA models, a damage model which connects the shock compression and tensile damage is established. And then the damage model is implemented in LS DYNA3D dynamic nonlinear program. Numerical simulation of deep hole blasting of groove is studied by use of the damage model proposed. The rock damage evolution process and the distributing rules of stress field under the explosion load are described well fairly, which provides the theory basis for the engineering blasting design.
基金supported by grants from the National Major Special Project of Cancer Early Detection and Treatment in Jinchang City(No.CZB20120064)the Project of Employees Health Status and Disease Burden Trend Study in Nonferrous Metals Corporation(No.JKB20120013)
文摘Our study explored the dynamic changes in andthe relationship between the DNA damage marker8-hydroxy-2'-deoxyguanosine (8-OHdG) and theDNA repair marker 8-hydroxyguanine DNAglycosidase 1 (hOGG1) according to the length ofoccupational employment in nickel smeltingworkers. One hundred forty nickel-exposedsmelting workers and 140 age-matched unexposedoffice workers were selected from the Jinchangcohort. The 8-OHdG levels in smelting workers wassignificantly higher than in office workers (Z=-8.688,P〈0.05) and the 8-OHdG levels among nickelsmelting workers in the 10-14 y employment lengthcategory was significantly higher than among allpeers. The hOGG1 levels among smelting workerswere significantly lower than those of non-exposedworkers (Z=-8.948, P〈0.05). There were significantdifferences between employment length andhOGG1 levels, with subjects employed in nickelsmelting for 10-14 y showing the highest levels ofhOGG1. Correlation analysis showed positivecorrelations between 8-OHdG and hOGG1 levels(r=0.413; P〈0.01). DNA damage was increased withemployment length among nickel smelting workersand was related to the inhibition of hOGG1 repaircapacity.
文摘Following a small-scale wedge failure at Yukon Zinc's Wolverine Mine in Yukon, Canada, a vibration monitoring program was added to the existing rockbolt pull testing regime. The failure in the 1150 drift occurred after numerous successive blasts in an adjacent tunnel had loosened friction bolts passing through an unmapped fault. Analysis of blasting vibration revealed that support integrity is not compromised unless there is a geological structure to act as a failure plane. The peak particle velocity(PPV) rarely exceeded 250 mm/s with a frequency larger than 50 Hz. As expected, blasting more competent rock resulted in higher PPVs. In such cases, reducing the round length from 3.5 m to 2.0 m was an effective means of limiting potential rock mass and support damage.
基金Supported by the National Key Technologies Research&Development Program(2017YFC0804607)the National Key Basic Research Development Plan(973 Proect)(2014CB047000)
文摘By using the technique of the split Hopkinson pressure bar( SHPB),impact tests at different stress wavelengths( 0. 8-2. 0 m) and strain rates( 20-120 s^(-1)) were conducted to study the dynamic mechanical properties and damage accumulation evolution lawof granite. Test results showthat the dynamic compressive strength and strain rate of granite have a significantly exponential correlation;the relationship between peak strain and strain rate is approximately linear,and the increase of wavelengths generally makes the level of peak strain uplift. The multiple-impacts test at a lowstrain rate indicates that at the same wavelength,the cumulative damage of granite shows an exponential increasing form with the increase of strain rate; when keeping the increase of strain rate constant and increasing the stress wavelength,the damage accumulation effect of granite is intensified and still shows an exponential increasing form; under the effect of multiple impacts,the damage development trend of granite is similar overall,but the increase rate is accelerating. Therefore the damage evolution model was established on the basis of the exponential function while the physical meaning of parameters in the model was determined. The model can reflect the effect of the wave parameters and multiple impacts. The validity of the model and the physical meaning of the parameters were verified by the test,which further offer a reference for correlational research and engineering application for the granite.
基金supported by the National Natural Science Foundation(Project No.50574061)the Changjiang Scholars and Innovative Research Team(No.IRT0411),Ministry of Education
文摘Selecting bridging agents properly is a critical factor in designing non-damaging or low-damaging drill-in fluids. Historically, Abrams' rule has been used for this purpose. However, Abrams' rule only addresses the size of particle required to initiate a bridge. The rule does not give an optimum size nor an ideal packing sequence for minimizing fluid invasion and optimizing sealing. This paper elaborates an ideal packing approach to solving the sealing problem by sealing pores with different sizes, especially those large pores which usually make dominant contribution to permeability and thereby effectively preventing the solids and filtrate of drill-in fluids from invading into formations, compared with the conventionally used techniques. Practical software has been developed to optimize the blending proportion of several bridging agents, so as to achieve ideal packing effectiveness. The method and its use in selecting the best blending proportion of several bridging agents are also discussed in this paper. A carefully designed drill-in fluid by using the ideal packing technique (named the IPT fluid) for offshore drilling operations at the Weizhou Oilfield, Nanhai West Company, CNOOC is presented. The near 100% return permeabilities from the dynamic damage tests using reservoir cores demonstrated the excellent bridging effect provided by this drill-in fluid.
基金supported in part by the National Nature Science Foundation of China (81121004, 81230041, 81171798, 81171812, 81272105, 81671924)the National Basic Science and Development Programme (2012CB518105)the National Science and Technology Major Project (2011ZXJ07104B-03B)
文摘Regenerative medicine has rapidly developed over the past decade and created new opportunities to repair or replace tissue or organ function lost because of congenital defects,age,diseases,or serious damage(Cheng et al.,2016a;Cheng et al.,2016b).Regenerative medicine strategies include the transplantation of bioactive factors,stem cells,or biomaterials,even the induced regeneration in a de novo,depending on the application(Fu,2014a;Huang and Fu,