Structural design simultaneously governed by earthquakes and environmental vibrations has received a lot of attention in recent years.Base-isolated composite structures are typically used in the above-mentioned struct...Structural design simultaneously governed by earthquakes and environmental vibrations has received a lot of attention in recent years.Base-isolated composite structures are typically used in the above-mentioned structural design.The corresponding analysis involves validating structural safety under earthquakes and human comfort under environmental vibrations through a time-history analysis.Thus,a reasonable damping model is essential.In this work,the representatives of viscous damping model and rate-independent damping model,namely the Rayleigh damping model and uniform damping model,were adopted to investigate the influence of damping models on the time-history analysis of such structural designs.The energy dissipation characteristics of the above-mentioned damping models were illustrated via a dynamic test of recycled aggregate concrete specimens.A case study was performed on a base-isolated steelconcrete composite structure.The dynamic responses under the excitation of earthquakes and environmental vibrations were compared using different damping models.The uniform damping model was found to be more flexible than the Rayleigh damping model in dealing with excitations with different frequency components.The uniform damping model is both theoretically advantageous and easy to use,demonstrating its potential in dynamic analysis of structures designed simultaneously governed by earthquakes and environmental vibrations.展开更多
As is already known, most of the plasma literature is occupied with the plasma instabilities and the inevitable plasma waves, which remain major obstacles to the thermonuclear fusion process. Many experimental data on...As is already known, most of the plasma literature is occupied with the plasma instabilities and the inevitable plasma waves, which remain major obstacles to the thermonuclear fusion process. Many experimental data on the plasma waves （growth or damping） and their accompanied theoretical interpretations have been published during the last five decades; lots of them have been identified and justified as well, some not yet. One of these is our previous research on plasma waves, which originated in the early 80＇s at the Plasma Physics Laboratory of the NCSR ＂Demokritos＂. As the wave rising is defined by the growth rate （or the damping on the extinguishment）, these important wavy quantities will be studied in detail in the present paper. Three examples are taken from our previous theoretical results, and the first observation reveals that the involved quantities are complicated enough to be studied by themselves. So, the use of suitable approach models, which may interpret the experimental wavy quantities, is the central idea of the present attempt, Furthermore, calculations with a little change of the initial conditions have been repeated in order to determine whether the plasma behaves as a chaotic medium.展开更多
The microstructures of the Zn-27Al alloy after modification, solid-solution treatment, and natural aging were studied. It was clarified why the damping properties of Zn-27Al alloys, after treatment, had advanced most ...The microstructures of the Zn-27Al alloy after modification, solid-solution treatment, and natural aging were studied. It was clarified why the damping properties of Zn-27Al alloys, after treatment, had advanced most on the basis of analyzing the microstructures. Approximate expressions have been educed, which can be used to quantificationally work out the damping of the Zn-27Al alloy on the basis of the micro interface sliding model. By comparing the testing damping properties of the foundry Zn-27Al alloys and the Zn-27Al alloys after modification, solid solution, and natural aging, it was shown that the expressions were rational.展开更多
Taking three kinds of metal-matrix composites (MMCS) (laminated composites, fibers reinforced MMCs, and particle-reinforced MMCs)as examples, the recent develop ments in modeling the damping behaviors of MMCs are ext...Taking three kinds of metal-matrix composites (MMCS) (laminated composites, fibers reinforced MMCs, and particle-reinforced MMCs)as examples, the recent develop ments in modeling the damping behaviors of MMCs are extensively reviewed. The damping mechanisms of different kinds of composites are quite different, and therefore, the analytical of numerical methods for different kinds of MMCs are also quite different. This will he shown in this extensive review. Furthermore, the directions of future developments in modeling the damping behavior of MMCs are also presented.展开更多
A fractional-order Maxwell model is used to describe the viscoelastic seabed mud. The experimental data of the real mud well fit the results of the fractional-order Maxwell model that has fewer parameters than the tra...A fractional-order Maxwell model is used to describe the viscoelastic seabed mud. The experimental data of the real mud well fit the results of the fractional-order Maxwell model that has fewer parameters than the traditional model. The model is then used to investigate the effect of the mud on the surface-wave damping. The damping rate of a linear monochromatic wave is obtained. The elastic resonance of the mud layer is observed, which leads to the peaks in the damping rate. The damping rate is a sum of the modal damping rates, which indicates the wave damping induced by the mud motion of particular modes. The analysis shows that near the resonance, the total damping rate is dominated by the damping rate of the corresponding mode.展开更多
Based on the energy transfer model(ETM) proposed by Bao et al.and the Monte Carlo(MC) model proposed by Hutcherson and Ye, this paper proposes an efficient molecular model(MC-S) for squeeze-film damping(SQFD) in raref...Based on the energy transfer model(ETM) proposed by Bao et al.and the Monte Carlo(MC) model proposed by Hutcherson and Ye, this paper proposes an efficient molecular model(MC-S) for squeeze-film damping(SQFD) in rarefied air by releasing the assumption of constant molecular velocity in the gap.Compared with the experiment data, the MC-S model is more efficient than the MC model and more accurate than ETM.Besides, by using the MC-S model, the feasibility of the empirical model proposed by Sumali for SQFD of different plate sizes is discussed.It is proved that, for various plate sizes, the accuracy of the empirical model is relatively high.At last, the SQFD of various vibration frequencies is discussed, and it shows that, for low vibration frequency, the MC-S model is reduced to ETM.展开更多
<正> In this paper,we find an analytic solution of the master equation of a non-resonant two-photon Jaynes-Cummings model(JCM)with phase damping with the help of the super-operator technique.We study the influen...<正> In this paper,we find an analytic solution of the master equation of a non-resonant two-photon Jaynes-Cummings model(JCM)with phase damping with the help of the super-operator technique.We study the influence ofphase damping on non-classical effects in the JCM,such as oscillations of the photon-number distribution,revivals of theatomic inversion,and sub-Possion photon statistics.It is demonstrated that the phase damping suppresses the revivalsof the atomic inversion and non-classical effects of the cavity field in the JCM.展开更多
To analyze the modeling methods of the dry friction rotor system,a local linearization model of the dry friction damping rotor system was built based on the simplified model of the wave-shaped steel-belt supporting ro...To analyze the modeling methods of the dry friction rotor system,a local linearization model of the dry friction damping rotor system was built based on the simplified model of the wave-shaped steel-belt supporting rotor system.In this model,the linear stiffness of damper closed to pre-deformation was defined as the stiffness of damper,the maximum amplitude of the rotor was calculated according to the load and linear rotor,and the damper's parameters were defined on the basis of the energy dissipation parameters.The presented method can reflect the hysteresis characteristics and is easy to calculate.Experimental results demonstrate the accuracy and feasibility of this method.展开更多
In this paper the macroscopic damping model for dynamical behavior of the structures with random polycrystalline configurations at micro-nano scales is established. First, the global motion equation of a crystal is de...In this paper the macroscopic damping model for dynamical behavior of the structures with random polycrystalline configurations at micro-nano scales is established. First, the global motion equation of a crystal is decomposed into a set of motion equations with independent single degree of freedom （SDOF） along normal discrete modes, and then damping behavior is introduced into each SDOF motion. Through the interpolation of discrete modes, the continuous representation of damping effects for the crystal is obtained. Second, from energy conservation law the expression of the damping coefficient is derived, and the approximate formula of damping coefficient is given. Next, the continuous damping coefficient for polycrystalline cluster is expressed, the continuous dynamical equation with damping term is obtained, and then the concrete damping coefficients for a polycrystalline Cu sample are shown. Finally, by using statistical two-scale homogenization method, the macroscopic homogenized dynamical equation containing damping term for the structures with random polycrystalline configurations at micro-nano scales is set up.展开更多
By employing the oil-film damping technique, the vibration-proof ability of rollingslideways assembly can be improved remarkably without influencing its inherent advanced char-acteristics. This paper presents an inves...By employing the oil-film damping technique, the vibration-proof ability of rollingslideways assembly can be improved remarkably without influencing its inherent advanced char-acteristics. This paper presents an investigation on dynamic modelling and parameter identifica-tion for rolling slideways assembly with damping oil-films on the basis of modal modification.The method combines theoretical calculation and experimental results effectively and can be usedto carry out reliable simulation and parameter analysis instead of pure analytical method.展开更多
The damping behaviors of Zn-Al alloys with fully lamellar microstructures were simulated with the cell method. The influences of the grain boundary condition, the strain amplitude, the number of the lamellae in the gr...The damping behaviors of Zn-Al alloys with fully lamellar microstructures were simulated with the cell method. The influences of the grain boundary condition, the strain amplitude, the number of the lamellae in the grain (N) and the content ratio of Zn and Al in Zn-Al alloys on the damping capacity were investigated. The results indicate that the grain boundary condition has great influence on the damping capacity of Zn-Al alloys, and also affects the relationship between the damping capacity and the number of lamellae (N). The variation of damping capacity with the strain amplitude is increasing exponentially with the strain amplitude and the damping capacity increases with the increasing of content of Zn.展开更多
文摘Structural design simultaneously governed by earthquakes and environmental vibrations has received a lot of attention in recent years.Base-isolated composite structures are typically used in the above-mentioned structural design.The corresponding analysis involves validating structural safety under earthquakes and human comfort under environmental vibrations through a time-history analysis.Thus,a reasonable damping model is essential.In this work,the representatives of viscous damping model and rate-independent damping model,namely the Rayleigh damping model and uniform damping model,were adopted to investigate the influence of damping models on the time-history analysis of such structural designs.The energy dissipation characteristics of the above-mentioned damping models were illustrated via a dynamic test of recycled aggregate concrete specimens.A case study was performed on a base-isolated steelconcrete composite structure.The dynamic responses under the excitation of earthquakes and environmental vibrations were compared using different damping models.The uniform damping model was found to be more flexible than the Rayleigh damping model in dealing with excitations with different frequency components.The uniform damping model is both theoretically advantageous and easy to use,demonstrating its potential in dynamic analysis of structures designed simultaneously governed by earthquakes and environmental vibrations.
文摘As is already known, most of the plasma literature is occupied with the plasma instabilities and the inevitable plasma waves, which remain major obstacles to the thermonuclear fusion process. Many experimental data on the plasma waves （growth or damping） and their accompanied theoretical interpretations have been published during the last five decades; lots of them have been identified and justified as well, some not yet. One of these is our previous research on plasma waves, which originated in the early 80＇s at the Plasma Physics Laboratory of the NCSR ＂Demokritos＂. As the wave rising is defined by the growth rate （or the damping on the extinguishment）, these important wavy quantities will be studied in detail in the present paper. Three examples are taken from our previous theoretical results, and the first observation reveals that the involved quantities are complicated enough to be studied by themselves. So, the use of suitable approach models, which may interpret the experimental wavy quantities, is the central idea of the present attempt, Furthermore, calculations with a little change of the initial conditions have been repeated in order to determine whether the plasma behaves as a chaotic medium.
文摘The microstructures of the Zn-27Al alloy after modification, solid-solution treatment, and natural aging were studied. It was clarified why the damping properties of Zn-27Al alloys, after treatment, had advanced most on the basis of analyzing the microstructures. Approximate expressions have been educed, which can be used to quantificationally work out the damping of the Zn-27Al alloy on the basis of the micro interface sliding model. By comparing the testing damping properties of the foundry Zn-27Al alloys and the Zn-27Al alloys after modification, solid solution, and natural aging, it was shown that the expressions were rational.
基金National Natural Science Foundation of China(NO.81703838)National Key Basic Research and Development Program(973 Program)funded project,spleen and dampness of traditional Chinese medicine drug research(NO.2013CB531803)+1 种基金Shandong Province,Chinese medicine science and technology development project,project number:2015-008Shandong Province,Chinese medicine science and technology development project,project number:2017-027.
文摘Taking three kinds of metal-matrix composites (MMCS) (laminated composites, fibers reinforced MMCs, and particle-reinforced MMCs)as examples, the recent develop ments in modeling the damping behaviors of MMCs are extensively reviewed. The damping mechanisms of different kinds of composites are quite different, and therefore, the analytical of numerical methods for different kinds of MMCs are also quite different. This will he shown in this extensive review. Furthermore, the directions of future developments in modeling the damping behavior of MMCs are also presented.
基金Project supported by the National Natural Science Foundation of China(No.10972117)
文摘A fractional-order Maxwell model is used to describe the viscoelastic seabed mud. The experimental data of the real mud well fit the results of the fractional-order Maxwell model that has fewer parameters than the traditional model. The model is then used to investigate the effect of the mud on the surface-wave damping. The damping rate of a linear monochromatic wave is obtained. The elastic resonance of the mud layer is observed, which leads to the peaks in the damping rate. The damping rate is a sum of the modal damping rates, which indicates the wave damping induced by the mud motion of particular modes. The analysis shows that near the resonance, the total damping rate is dominated by the damping rate of the corresponding mode.
基金Project supported by the National Natural Science Foundation of China(Grant No.51375091)
文摘Based on the energy transfer model(ETM) proposed by Bao et al.and the Monte Carlo(MC) model proposed by Hutcherson and Ye, this paper proposes an efficient molecular model(MC-S) for squeeze-film damping(SQFD) in rarefied air by releasing the assumption of constant molecular velocity in the gap.Compared with the experiment data, the MC-S model is more efficient than the MC model and more accurate than ETM.Besides, by using the MC-S model, the feasibility of the empirical model proposed by Sumali for SQFD of different plate sizes is discussed.It is proved that, for various plate sizes, the accuracy of the empirical model is relatively high.At last, the SQFD of various vibration frequencies is discussed, and it shows that, for low vibration frequency, the MC-S model is reduced to ETM.
基金The project supported in part by National Natural Science Foundation of China under Grant Nos. 10274093, 10474118, and 10474120, the Natural Science Foundation of Hunan Province of China under Grant No. 05JJ3005, the Youth-Core Teachers Foundation of Hunan Province of China under Grant No. 2003165, and the Science Research Foundation of Educational Department of Hunan Province of China under Grant No. 05C756
文摘<正> In this paper,we find an analytic solution of the master equation of a non-resonant two-photon Jaynes-Cummings model(JCM)with phase damping with the help of the super-operator technique.We study the influence ofphase damping on non-classical effects in the JCM,such as oscillations of the photon-number distribution,revivals of theatomic inversion,and sub-Possion photon statistics.It is demonstrated that the phase damping suppresses the revivalsof the atomic inversion and non-classical effects of the cavity field in the JCM.
文摘To analyze the modeling methods of the dry friction rotor system,a local linearization model of the dry friction damping rotor system was built based on the simplified model of the wave-shaped steel-belt supporting rotor system.In this model,the linear stiffness of damper closed to pre-deformation was defined as the stiffness of damper,the maximum amplitude of the rotor was calculated according to the load and linear rotor,and the damper's parameters were defined on the basis of the energy dissipation parameters.The presented method can reflect the hysteresis characteristics and is easy to calculate.Experimental results demonstrate the accuracy and feasibility of this method.
基金partially supported by the National Basic Research Program of China (973 Program Grant 2012CB025904)the National Natural Science Foundation of China (Grant 11102221)the State Key Laboratory of Science and Engineering Computing (LSEC)
文摘In this paper the macroscopic damping model for dynamical behavior of the structures with random polycrystalline configurations at micro-nano scales is established. First, the global motion equation of a crystal is decomposed into a set of motion equations with independent single degree of freedom （SDOF） along normal discrete modes, and then damping behavior is introduced into each SDOF motion. Through the interpolation of discrete modes, the continuous representation of damping effects for the crystal is obtained. Second, from energy conservation law the expression of the damping coefficient is derived, and the approximate formula of damping coefficient is given. Next, the continuous damping coefficient for polycrystalline cluster is expressed, the continuous dynamical equation with damping term is obtained, and then the concrete damping coefficients for a polycrystalline Cu sample are shown. Finally, by using statistical two-scale homogenization method, the macroscopic homogenized dynamical equation containing damping term for the structures with random polycrystalline configurations at micro-nano scales is set up.
文摘By employing the oil-film damping technique, the vibration-proof ability of rollingslideways assembly can be improved remarkably without influencing its inherent advanced char-acteristics. This paper presents an investigation on dynamic modelling and parameter identifica-tion for rolling slideways assembly with damping oil-films on the basis of modal modification.The method combines theoretical calculation and experimental results effectively and can be usedto carry out reliable simulation and parameter analysis instead of pure analytical method.
文摘The damping behaviors of Zn-Al alloys with fully lamellar microstructures were simulated with the cell method. The influences of the grain boundary condition, the strain amplitude, the number of the lamellae in the grain (N) and the content ratio of Zn and Al in Zn-Al alloys on the damping capacity were investigated. The results indicate that the grain boundary condition has great influence on the damping capacity of Zn-Al alloys, and also affects the relationship between the damping capacity and the number of lamellae (N). The variation of damping capacity with the strain amplitude is increasing exponentially with the strain amplitude and the damping capacity increases with the increasing of content of Zn.
