基于SCADA-DCS通讯技术的油气开采数据自动化采集与控制系统

设计基于SCADA-DCS通讯技术的油气开采数据自动化采集与控制系统。系统以SCADA服务器为上层监控服务器,通过与井站现场仪器仪表实时通信,监控整个开采过程。当油气缓冲罐液位越限时,SCADA服务器自动下达指令至原油处理站DCS,启动基于智能PID的油泵控制器,调节油泵变频器,控制油气液位不溢出。系统使用SCADA-DCS通讯技术的MODBUS通信协议,并根据通信中断优先级分配方法,确保对中断处理时间要求高的通信请求能实时响应。实验结果表明,该系统能提升油气液位控制和紧急信息通讯效率。

工业加热电炉高耗电异常DCS数据主动采集技术研究

工业加热电炉在运行过程中容易出现高耗电现象,且异常用电数据产生的频率较高、数据量较大,使得对异常数据的采集效率降低。为此,提出工业加热电炉高耗电异常分布式控制系统数据主动采集技术研究。利用局部平均值计算工业加热缺失DCS数据,采用拉格朗日插值法对其插补,对插补后的数据标准化处理。构建用电不平衡特征矩阵,采用局部离群因子检测算法,提取出用电异常数据特征集,构建基于长短期记忆网络(long short-term memory,简称LSTM)的分位数回归模型,实现工业电炉异常DCS数据的主动采集。实验结果表明,所提方法有效地提高了采集效率和采集精度,采集平均用时仅为029ms,其准确率-召回率在98%以上。

Distributed Weighted Data Aggregation Algorithm in End-to-Edge Communication Networks Based on Multi-armed Bandit

As a combination of edge computing and artificial intelligence,edge intelligence has become a promising technique and provided its users with a series of fast,precise,and customized services.In edge intelligence,when learning agents are deployed on the edge side,the data aggregation from the end side to the designated edge devices is an important research topic.Considering the various importance of end devices,this paper studies the weighted data aggregation problem in a single hop end-to-edge communication network.Firstly,to make sure all the end devices with various weights are fairly treated in data aggregation,a distributed end-to-edge cooperative scheme is proposed.Then,to handle the massive contention on the wireless channel caused by end devices,a multi-armed bandit(MAB)algorithm is designed to help the end devices find their most appropriate update rates.Diffe-rent from the traditional data aggregation works,combining the MAB enables our algorithm a higher efficiency in data aggregation.With a theoretical analysis,we show that the efficiency of our algorithm is asymptotically optimal.Comparative experiments with previous works are also conducted to show the strength of our algorithm.

利用DCS系统网络实现炼化企业固定污染源在线监测数据上传

针对炼化企业污染排放特点及环保监管需求,本文重点介绍如何利用DCS系统网络实现固定污染源在线监测数据上传,并对在线监测在实际运用中平台数据显示离线等故障现象进行解析。

Secure vehicular data communication in Named Data Networking

Vehicular data misuse may lead to traffic accidents and even loss of life,so it is crucial to achieve secure vehicular data communications.This paper focuses on secure vehicular data communications in the Named Data Networking(NDN).In NDN,names,provider IDs and data are transmitted in plaintext,which exposes vehicular data to security threats and leads to considerable data communication costs and failure rates.This paper proposes a Secure vehicular Data Communication(SDC)approach in NDN to supress data communication costs and failure rates.SCD constructs a vehicular backbone to reduce the number of authenticated nodes involved in reverse paths.Only the ciphtertext of the name and data is included in the signed Interest and Data and transmitted along the backbone,so the secure data communications are achieved.SCD is evaluated,and the data results demonstrate that SCD achieves the above objectives.

DCS控制系统在工业自动化中的应用研究

DCS控制系统在工业自动化中的应用是通过将计算机技术和控制技术相结合,运用集中控制的方式,对工业自动化进行控制,使其能够满足工业生产过程中的需求。DCS控制系统在工业自动化中的应用,能够保证工业生产过程中各个环节之间的协调合作,使其在进行操作和管理时更加方便和高效。文章分析了DCS控制系统在工业自动化中应用的意义,探讨了DCS控制系统在工业自动化中的具体应用,以及应用中应该注意的问题,以供参考。

核电厂智能化DCS数据管理系统建设

本文针对福清核电DCS系统,因不同平台的技术差异,图纸、组态和接口数据量大,文件复杂,使用和管理过程效率低下,人因风险高。基于此,提出了一种以面向内容为核心,以计算机数据库技术为基本方法,依托设计输入文件和运行过程数据,构建要素间普遍联系的DCS数据管理系统。有效梳理了相关业务所需要的各类数据和文件的获取与处理方式,实现数据组织、图纸与组态数据的精确关联,并设计和建设了一站式检索平台,对数据和图纸进行深度分析,实现自动化风险提示的变更管理,以服务于现场执行控制系统相关工作和检查的各个过程。本文详细论述了需求分析和项目建设办法,为类似项目的建设、维护提供经验。

DCGAN Based Spectrum Sensing Data Enhancement for Behavior Recognition in Self-Organized Communication Network

Communication behavior recognition is an issue with increasingly importance in the antiterrorism and national defense area.However,the sensing data obtained in actual environment is often not sufficient to accurately analyze the communication behavior.Traditional means can hardly utilize the scarce and crude spectrum sensing data captured in a real scene.Thus,communication behavior recognition using raw sensing data under smallsample condition has become a new challenge.In this paper,a data enhanced communication behavior recognition(DECBR)scheme is proposed to meet this challenge.Firstly,a preprocessing method is designed to make the raw spectrum data suitable for the proposed scheme.Then,an adaptive convolutional neural network structure is exploited to carry out communication behavior recognition.Moreover,DCGAN is applied to support data enhancement,which realize communication behavior recognition under small-sample condition.Finally,the scheme is verified by experiments under different data size.The results show that the DECBR scheme can greatly improve the accuracy and efficiency of behavior recognition under smallsample condition.

Coati Optimization-Based Energy Efficient Routing Protocol for Unmanned Aerial Vehicle Communication

With the flexible deployment and high mobility of Unmanned Aerial Vehicles(UAVs)in an open environment,they have generated con-siderable attention in military and civil applications intending to enable ubiquitous connectivity and foster agile communications.The difficulty stems from features other than mobile ad-hoc network(MANET),namely aerial mobility in three-dimensional space and often changing topology.In the UAV network,a single node serves as a forwarding,transmitting,and receiving node at the same time.Typically,the communication path is multi-hop,and routing significantly affects the network’s performance.A lot of effort should be invested in performance analysis for selecting the optimum routing system.With this motivation,this study modelled a new Coati Optimization Algorithm-based Energy-Efficient Routing Process for Unmanned Aerial Vehicle Communication(COAER-UAVC)technique.The presented COAER-UAVC technique establishes effective routes for communication between the UAVs.It is primarily based on the coati characteristics in nature:if attacking and hunting iguanas and escaping from predators.Besides,the presented COAER-UAVC technique concentrates on the design of fitness functions to minimize energy utilization and communication delay.A varied group of simulations was performed to depict the optimum performance of the COAER-UAVC system.The experimental results verified that the COAER-UAVC technique had assured improved performance over other approaches.

基于Modbus_TCP协议的S7-1200与JX-300 DCS系统间的数据通讯与实现

DCS分布式控制系统和PLC可编程控制器是工业生产过程中的重要控制设备,但是两者分属不同的生产厂家,在两设备进行信息通讯时缺乏详细的技术支持。本文通过使用Modbus_TCP协议实现了JX-300 DCS与S7-1200 PLC之间的数据通讯问题,实现了工业生产过程中DCS和PLC之间的信号传递与传输,为工业生产复杂繁琐的信号传递问题提供了可行的实施方案。

Reliable transmission of consultative committee for space data systems file delivery protocol in deep space communication

In consultative committee for space data systems（CCSDS） file delivery protocol（CFDP） recommendation of reliable transmission,there are no detail transmission procedure and delay calculation of prompted negative acknowledge and asynchronous negative acknowledge models.CFDP is designed to provide data and storage management,story and forward,custody transfer and reliable end-to-end delivery over deep space characterized by huge latency,intermittent link,asymmetric bandwidth and big bit error rate（BER）.Four reliable transmission models are analyzed and an expected file-delivery time is calculated with different trans-mission rates,numbers and sizes of packet data units,BERs and frequencies of external events,etc.By comparison of four CFDP models,the requirement of BER for typical missions in deep space is obtained and rules of choosing CFDP models under different uplink state informations are given,which provides references for protocol models selection,utilization and modification.

基于联合功率量/载波调制的DC-DC变换器功率/数据复合传输方法

DC-DC变换器可以同时进行功率变换和数据传输。针对较低通信速率限制功率/数据复合传输(power/data multiplexing transmission,PDMT)应用的难题,提出一种联合功率量/载波调制(joint power/carrier modulation,JPCM)的新方案。与传统二进制PDMT方案不同,JPCM同时对功率量/载波进行2FSK调制,实现两种数据并行传输,可以看作一种四进制FSK,有效提高通信速率。相较于传统四进制PDMT方案,JPCM方案解调环节所需带通滤波器数目可减少一半,且软件开销更低。首先,证明PDMT在理论上的可行性;然后,根据4种不同电压纹波频率配置不同码元,并设计了包含高低数据位调制的JPCM和基于滑动傅里叶变换的数据解调方案;此外,重点分析输出参考电压突变对通信的影响,动态调整阈值可有效抑制误码;最后,搭建一个由2个Buck变换器并联的实验装置,实验结果表明在稳态、负载突变和输出参考电压突变的工况下,JPCM方案均能实现20 kb/s的通信速率,验证了该方案的有效性。

Achieving Fuzzy Matching Data Sharing for Secure Cloud-Edge Communication

In this paper,we propose a novel fuzzy matching data sharing scheme named FADS for cloudedge communications.FADS allows users to specify their access policies,and enables receivers to obtain the data transmitted by the senders if and only if the two sides meet their defined certain policies simultaneously.Specifically,we first formalize the definition and security models of fuzzy matching data sharing in cloud-edge environments.Then,we construct a concrete instantiation by pairing-based cryptosystem and the privacy-preserving set intersection on attribute sets from both sides to construct a concurrent matching over the policies.If the matching succeeds,the data can be decrypted.Otherwise,nothing will be revealed.In addition,FADS allows users to dynamically specify the policy for each time,which is an urgent demand in practice.A thorough security analysis demonstrates that FADS is of provable security under indistinguishable chosen ciphertext attack(IND-CCA)in random oracle model against probabilistic polynomial-time(PPT)adversary,and the desirable security properties of privacy and authenticity are achieved.Extensive experiments provide evidence that FADS is with acceptable efficiency.

Multivariate Aggregated NOMA for Resource Aware Wireless Network Communication Security

NonorthogonalMultiple Access(NOMA)is incorporated into the wireless network systems to achieve better connectivity,spectral and energy effectiveness,higher data transfer rate,and also obtain the high quality of services(QoS).In order to improve throughput and minimum latency,aMultivariate Renkonen Regressive Weighted Preference Bootstrap Aggregation based Nonorthogonal Multiple Access(MRRWPBA-NOMA)technique is introduced for network communication.In the downlink transmission,each mobile device’s resources and their characteristics like energy,bandwidth,and trust are measured.Followed by,the Weighted Preference Bootstrap Aggregation is applied to recognize the resource-efficient mobile devices for aware data transmission by constructing the different weak hypotheses i.e.,Multivariate Renkonen Regression functions.Based on the classification,resource and trust-aware devices are selected for transmission.Simulation of the proposed MRRWPBA-NOMA technique and existing methods are carried out with different metrics such as data delivery ratio,throughput,latency,packet loss rate,and energy efficiency,signaling overhead.The simulation results assessment indicates that the proposed MRRWPBA-NOMA outperforms well than the conventional methods.

Robust and Efficient Data Transmission over Noisy Communication Channels Using Stacked and Denoising Autoencoders

We study the effects of quantization and additive white Gaussian noise(AWGN) in transmitting latent representations of images over a noisy communication channel. The latent representations are obtained using autoencoders(AEs). We analyze image reconstruction and classification performance for different channel noise powers, latent vector sizes, and number of quantization bits used for the latent variables as well as AEs’ parameters. The results show that the digital transmission of latent representations using conventional AEs alone is extremely vulnerable to channel noise and quantization effects. We then propose a combination of basic AE and a denoising autoencoder(DAE) to denoise the corrupted latent vectors at the receiver. This approach demonstrates robustness against channel noise and quantization effects and enables a significant improvement in image reconstruction and classification performance particularly in adverse scenarios with high noise powers and significant quantization effects.

Federated Learning for 6G:A Survey From Perspective of Integrated Sensing,Communication and Computation

With the rapid advancements in edge computing and artificial intelligence,federated learning(FL)has gained momentum as a promising approach to collaborative data utilization across organizations and devices,while ensuring data privacy and information security.In order to further harness the energy efficiency of wireless networks,an integrated sensing,communication and computation(ISCC)framework has been proposed,which is anticipated to be a key enabler in the era of 6G networks.Although the advantages of pushing intelligence to edge devices are multi-fold,some challenges arise when incorporating FL into wireless networks under the umbrella of ISCC.This paper provides a comprehensive survey of FL,with special emphasis on the design and optimization of ISCC.We commence by introducing the background and fundamentals of FL and the ISCC framework.Subsequently,the aforementioned challenges are highlighted and the state of the art in potential solutions is reviewed.Finally,design guidelines are provided for the incorporation of FL and ISCC.Overall,this paper aims to contribute to the understanding of FL in the context of wireless networks,with a focus on the ISCC framework,and provide insights into addressing the challenges and optimizing the design for the integration of FL into future 6G networks.

Create Your Own Data and Energy Integrated Communication Network:A Brief Tutorial and a Prototype System

In order to satisfy the ever-increasing energy appetite of the massive battery-powered and batteryless communication devices,radio frequency(RF)signals have been relied upon for transferring wireless power to them.The joint coordination of wireless power transfer(WPT)and wireless information transfer(WIT)yields simultaneous wireless information and power transfer(SWIPT)as well as data and energy integrated communication network(DEIN).However,as a promising technique,few efforts are invested in the hardware implementation of DEIN.In order to make DEIN a reality,this paper focuses on hardware implementation of a DEIN.It firstly provides a brief tutorial on SWIPT,while summarising the latest hardware design of WPT transceiver and the existing commercial solutions.Then,a prototype design in DEIN with full protocol stack is elaborated,followed by its performance evaluation.

DCS组态数据智能分析调试方法研究与应用

为解决因DCS组态数据错误而产生的机组非预期缺陷和停机停堆风险,基于对DCS工程文件及设计文件的研究,提出了一种DCS组态数据智能分析调试方法。该方法通过解析DCS组态数据,制定匹配规则,再辅助计算机数据库信息建模技术,实现一层组态自检、二层组态自检、一二层组态对比功能。该方法已应用在福清1-4号机组中,取得了卓越成效。

Enabling Efficient Data Transmission in Wireless Sensor Networks-Based IoT Application

The use of the Internet of Things(IoT)is expanding at an unprecedented scale in many critical applications due to the ability to interconnect and utilize a plethora of wide range of devices.In critical infrastructure domains like oil and gas supply,intelligent transportation,power grids,and autonomous agriculture,it is essential to guarantee the confidentiality,integrity,and authenticity of data collected and exchanged.However,the limited resources coupled with the heterogeneity of IoT devices make it inefficient or sometimes infeasible to achieve secure data transmission using traditional cryptographic techniques.Consequently,designing a lightweight secure data transmission scheme is becoming essential.In this article,we propose lightweight secure data transmission(LSDT)scheme for IoT environments.LSDT consists of three phases and utilizes an effective combination of symmetric keys and the Elliptic Curve Menezes-Qu-Vanstone asymmetric key agreement protocol.We design the simulation environment and experiments to evaluate the performance of the LSDT scheme in terms of communication and computation costs.Security and performance analysis indicates that the LSDT scheme is secure,suitable for IoT applications,and performs better in comparison to other related security schemes.

A Message Transmission Protocol of a Mobile Data Communication Network

ＡＭｅｓｓａｇｅＴｒａｎｓｍｉｓｓｉｏｎＰｒｏｔｏｃｏｌｏｆａＭｏｂｉｌｅＤａｔａＣｏｍｍｕｎｉｃａｔｉｏｎＮｅｔｗｏｒｋＧＵＸｕｅｍａｉ；ＧＵＯＱｉｎｇ；ＬＩＵＺｈｏｎｇ（顾学迈）（郭庆）（刘忠）（ＲｅｓｅａｒｃｈＩｎｓｔｉｔｕｔｅｏｆＣｏｍｍｕｎ...