An improved positioning model of deep-seafloor datum point at large incidence angle

The inhomogeneous sound speed in seawater causes refraction of sound waves,and the elimination of the refraction effect is essential to the accuracy of underwater acoustic positioning.The raytracing method is an indispensable tool for effectively handling problems.However,this method has a conflict between localization accuracy and computational quantity.The equivalent sound speed profile(ESSP)method uses a simple sound speed profile(SSP)instead of the actual complex SSP,which can improve positioning precision but with residual error.The residual error is especially non-negligible in deep water and at large beam incidence angles.By analyzing the residual error of the ESSP method through a simulation,an empirical formula of error is presented.The data collected in the sailing circle mode(large incidence angle)of the South China Sea are used for verification.The experiments show that compared to the ESSP method,the improved algorithm has higher positioning precision and is more efficient than the ray-tracing method.

Contributions of annual and semiannual tidal constituents to chart datum in the China seas and adjacent waters

Global uniform chart datum(CD)surface construction is the basic upon which to realize various vertical datums transformation,and is of great importance for geospatial data expression under the same vertical datum.Generally,the CD level is computed by developing the function between tidal constituents’harmonic constants and time,i.e.,the lowest astronomical tide is taken as the lowest predicted tide level by adopting the major constituents over a 19-a period.The CD surface prescribed in China is the theoretical lowest tide(TLT)and is calculated using 13 tidal constituents,i.e.,short-period(Q_(1),O_(1),P_(1),K_(1),N_(2),M_(2),S_(2),K_(2),M_(4),MS_(4)and M_(6))and long-period(Sa and Ssa)tidal constituents.Although the accuracy in determining short-period tidal constituents has improved gradually,the long-period tide has not been studied thoroughly owing to nonstationary and temporal variations.Previous studies have intended to evaluate the effect of Sa and Ssa tides in the determination of the TLT level for the purpose of determining a more accurate CD surface for the China seas and adjacent waters.Here,the parameters of long-period tidal correction and long-period tidal correction rate were treated as the effect of both Sa and Ssa on the TLT,and the TOPEX/Poseidon and Jason series satellite altimetry data ranged from October 1992 to April 2022 were adopted to analyze the contribution of long-period tidal constituents.Results showed that the average long-period correction value is 10.10 cm(range from 8.57 cm to 14.98 cm),and that the average long-period tidal contribution rate is 14.56%(range from 9.09%to 23.97%)in the China seas and adjacent waters.Finally,data from 82 tide gauge station with at least a 1-a record of hourly observations were compared with satellite-derived result.We concluded that the long-period tidal contribution should not be neglected in TLT construction.Furthermore,to reduce tidal datum uncertainty,accurate extraction of long-period tidal constituents should receive closer attentions.

Review of the Research Progress on Static Earth Gravity Field and Vertical Datum in China during 2019—2023

The contribution presents the representative research progress on global static gravity field modeling,regional geoid/quasigeoid determination,vertical datum study,as well as the theory,algorithm and software for gravity field study in China from 2019 to 2023,which are the highlights of the chapter 6“Progress in Earth Gravity Model and Vertical Datum”in the“2019—2023 China National Report on Geodesy”that submitted to the International Association of Geodesy(IAG).In addition,suggestions are proposed to promote the research in the fields of earth gravity field,geoid/quasigeoid and vertical datumin China according to trends of international geodesy and related disciplines.

An iterative algorithm of NWTLS-EC for three dimensional-datum transformation with large rotation angle

The Gauss-Markov （GM） model and the Errors-in-Variables （EIV） model are frequently used to perform 3D coordinate transformations in geodesy and engineering surveys. In these applications, because the observation errors in original coordinates system are also taken into account, the latter is more accurate and reasonable than the former. Although the Weighted Total Least Squares （WTLS） technique has been intro- duced into coordinate transformations as the measured points are heteroscedastic and correlated, the Variance- Covariance Matrix （VCM） of observations is restricted by a particular structure, namely, only the correlations of each points are taken into account. Because the 3D datum transformation with large rotation angle is a non- linear problem, the WTLS is no longer suitable in this ease. In this contribution, we suggested the nonlinear WTLS adjustments with equality constraints （NWTLS-EC） for 3D datum transformation with large rotation an- gle, which removed the particular structure restriction on the VCM. The Least Squares adjustment with Equality （LSE） constraints is employed to solve NWTLS-EC as the nonlinear model has been linearized, and an iterative algorithm is proposed with the LSE solution. A simulation study of 3D datum transformation with large rotation angle is given to insight into the feasibility of our algorithm at last.

Determination of Geopotential of Local Vertical Datum Surface

This paper first develops the approaches to determine the geopotential of the local mean sea level,and then investigates the offset of the 1985 vertical datum surface defined by the mean sea level of Yellow Sea at the Dagang Tide Gauge in Qingdao city using the developed approaches and GPS/leveling data.It shows that the geopotential of the local mean sea level at the tide gauge is equal to 62 636 853.5±0.2 m2·s -2 and that the 1985 vertical datum surface is 24.6±5.4 cm above the geoid realized by the geopotential W 0= 62 636 856.0±0.5 m2·s -2.

Unification of national surveying vertical datum

The vertical datum of China is composed of leveling datum for heights and chart datum for depths. The determination of national leveling datum and its disadvantages were discussed firstly. The local mean sea level and chart datum with its guarantee rate of navigation safety were studied secondly. The models of unification of national surveying vertical datum, such as optimization model of mean sea level, adoption of New Chinese quasi-geoid of 2000(CQG2000) and time-invariant global geoid were suggested finally.

CAUCHY PROBLEM FOR LINEARIZED NON-CUTOFF BOLTZMANN EQUATION WITH DISTRIBUTION INITIAL DATUM

In this article, we study the Cauchy problem for the linearized spatially homogeneous non-cutoff Boltzamnn equation with Maxwellian molecules. By using the spectral decomposition, we solve the Cauchy problem with initial datum in the sense of distribution, which contains the dual space of a Gelfand-Shilov class. We also prove that this solution belongs to the Gelfand-Shilov space for any positive time.

Multiple Ambiguity Datum Precise Point Positioning Technique Using Multi-Constellation GNSS: GPS, GLONASS, Galileo and BeiDou

Precise Point Positioning (PPP) is traditionally based on dual-frequency observations of GPS or GPS/GLONASS satellite navigation systems. Recently, new GNSS constellations, such as the European Galileo and the Chinese BeiDou are developing rapidly. With the new IGS project known as IGS MGEX which produces highly accurate GNSS orbital and clock products, multi-constellations PPP becomes feasible. On the other hand, the un-differenced ionosphere-free is commonly used as standard precise point positioning technique. However, the existence of receiver and satellite biases, which are absorbed by the ambiguities, significantly affected the convergence time. Between-satellite-single-difference (BSSD) ionosphere free PPP technique is traditionally used to cancel out the receiver related biases from both code and phase measurements. This paper introduces multiple ambiguity datum (MAD) PPP technique which can be applied to separate the code and phase measurements removing the receiver and satellite code biases affecting the GNSS receiver phase clock and ambiguities parameters. The mathematical model for the three GNSS PPP techniques is developed by considering the current full GNSS constellations. In addition, the current limitations of the GNSS PPP techniques are discussed. Static post-processing results for a number of IGS MGEX GNSS stations are presented to investigate the contribution of the newly GNSS system observations and the newly developed GNSS PPP techniques and its limitations. The results indicate that the additional Galileo and BeiDou observations have a marginal effect on the positioning accuracy and convergence time compared with the existence combined GPS/GLONASS PPP. However, reference to GPS PPP, the contribution of BeiDou observations can be considered geographically dependent. In addition, the results show that the BSSD PPP models slightly enhance the convergence time compared with other PPP techniques. However, both the standard un-differenced and the developed multiple ambiguity datum techniques present comparable positioning accuracy and convergence time due to the lack of code and phase-based satellite clock products and the mathematical correlation between the positioning and ambiguity parameters.

Progresses and Prospects of Marine Geodetic Datum and Marine Navigation in China

Territorial water is a significant part of national sovereignty of China,thus the infrastructures of national space datum and location services should cover the sea areas except for the land areas.China has established relatively complete geodetic coordinate frame in land areas over the past decades,including the lastest developed China Geodetic Coordinate System 2000(CGCS 2000)with its reference frame and the national gravity datum 2000.However,the currently used geodetic infrastructures have not well covered the sea areas of China.The marine geodetic datum and marine navigation technologies need to be further developed and extended to satisfy the national demands of marine environment and resources detection,scientific investigation as well as marine economy development in new era of China.This paper mainly reviews the development and the progress of Chinese marine geodetic datum and marine navigation,analyses related key technologies in establishing our national marine geodetic datum.Some current trends and future directions for independently developing our national marine geodetic datum and marine navigation technologies are discussed.

Geodetic Datum Transformation Parameters towards WGS84 Applicable to the 1/50k Topographical Map (1981) of Burundi

The knowledge of the geodetic reference datum of maps or data is required for their use in a GIS. Many older maps are lacking this information, making their use cumbersome. The availability of an aerial coverage at high resolution of Burundi and digital elevation model, based on a novel geodetic network, all calculated on the WGS84 datum, allows to calculate the datum applicable to older maps, for instance the regular 1/50k map of the country. The method, based on the difference in geocentric coordinates between points common to the two systems, yields: Δx = -156.71 ± 10.2 m, .Δy = -3.26 ± 13.2 m, .Δz = -290.77 ± 21.06 m, well in keeping with older values proposed by the NGA.

Establishing altitude datum in dynamic deformation areas

In the high groundwater table mine areas in Eastern China, such as Yanzhou Mining Group, since the rapid development of coal industry, and especially the mining technique of fully-mechanized top-coal caving mining have been used widely, the surface deformation and subsidence becomes more tempestuous and rapider. With the great surface deformation, the rapid deformation of the leveling control network created newly is also resulted. Therefore to establish a high precise altitude datum in dynamic deformation mine areas is one of the key problems to be settled urgently. The theory of altitude datum establishment with GPS technique in dynamic deformation areas due to mining is inquired. Finally a case is given.

Development of new geodetic coordinate datum management system

Current situations of geodetic coordinate datum development procedures and management methods in China were presented. The precisions of astronomic geodetic network and space geodetic network were introduced. Geodetic datum requirements under the current and future new surveying technologies and their applications were discussed. The necessity for upgrading national astronomic geodetic network and development of a new open coordinate geodetic datum management method was investigated.

Deformation datum in source mechanism inversion

Based on the analyses of geodetic deformation datum, the concepts of real datum and relative datum of displacements associated with an earthquake are put foward. Introducting a deformation datum parameter into model parameter vector can enable the reference station to be set in the epicentral areas. Two improved inversionmethods, the deformation datum parameter (DDP) method and deformation difference (DD) method, are advanced in this paper. They are further applied to dislocation model inversion of the 1990 Gonghe Ms7.0 earthquake. The inversion results inferred by using the two methods are well consistent with each other, which basically reflect the source geometry and the slip of the causative fault.

Analysis of datum-instability effect on calculated results of data from Longmen Mountain regional gravity network

A statistical correlation method is used to study the effect of instability of the calculation datum （ used in traditional method of indirect adjustment） on calculated gravity results, using data recorded by Longmen Mountain regional gravity network during 1996 -2007. The result shows that when this effect is corrected, anomalous gravity changes before the 2008 Wenchuan Ms8. 0 earthquake become obvious and characteristically distinctive. Thus the datum-stability problem must be considered when processing and analyzing data recorded by a regional gravity network.

DATUM带来极至音乐诱惑

韩国电子产品巨头JNC旗下的第二品牌DATUM,携经典MP3产品MH-228首次登陆中国内地市场。DATUM MH228MP3有着出色的外观,冰蓝色背光的高精度图像LCD让你时尚魅力飞扬,配合前卫的金属质感外壳更适合追求新潮的年轻一族。支持最流行的MP3/WMA格式及多达5种的EQ播放模式。

Towards a Semi-Kinematic Datum for Egypt

Since 1990, positioning technology has undergone a dramatic improvement in terms of accuracy and accessibility. Prior to 1990, national geodetic datums were considered to be static with fixed coordinates assigned to the datum origin by convention. Datum coordinates were dynamic only as a consequence of re-observation and re-adjustment, or localized disturbance. This strategy has been suitable for terrestrial surveys within stable continental areas. The accessibility of Precise Point Positioning “PPP” is now widespread with the provision of free online processing facilities by various geodetic agencies. Such ready accessibility to a global datum has serious implication for this technology with static geocentric datums. The Geocentric Datum of Egypt (ITRF1994 Epoch 1996 based on GPS Observation Campaign 1996), for example, is now offset by -42.0 to +32.0cm from the ITRF2008 Epoch 2015 due to the inexorable tectonic movements of the Nubian plate since the datum realization in 1996. Unless the local geocentric datums are kept in step with global terrestrial reference frames, discrepancies between the two will increase in magnitude over time and will become discernable, even using PPP. The PPP users nowadays are unaware of this datum offset and incorrectly assume that a coordinated datum monument is in error if there is found to be a disagreement greater than the level of accuracy of the positioning technique. In this study, to avoid the discrepancies between the applied datum and On-Line GNSS Services, a semi-kinematic datum and related deformation mode are proposed for Egypt. The result also confirmed that the PMM model was giving good performance for the other parts out of Egypt. The evaluation study shows the best performances for the Egyptian deformation model over the ITRF2008 PMM.

音乐、存储两相宜——DATUM MH-228 MP3 随身听

这是一款外观精致、操作方便、特别省电并且兼顾移动存储器功能的MP3随身听。

把玩数码音乐时尚——丹丁(Datum)DX-1数码音乐播放器

丹丁(Datum)是韩国MP3播放器中的著名品牌之一,此次丹丁的DX-1 MP3播放器,更是拥有精致优雅的外观设计,以及不俗的功能。DX-1整机重量仅仅为38克(不含电池),简洁明快的正面设计,其它操作键被分移到侧面,周边采用椭圆形铝材、正面和背面采用黑色面板,在椭圆面板上分布了圆形按键。极大限度地体现出设计之和谐。

Sea level change along the coast of China relative to the isostatic datum

On the basis of the analyses of significant periods for the sea level observation data taken from recent several decades at 12 tide stations, the monthly mean sea level observations are fitted by a model of linear trend of sea level change superimposed with several variations of different fixed periods. The trends of sea level relative changes and their errors are estimated by the LS method. The results are reduced to the isostatic datum proposed and established in the paper (Huang et al. , 1991, Seismology and Geology , 1, 1-15). The trends of sea level changes in the near future along the coast of China are studied. It is pointed out that the general trend of the sea level change along the coast of China is going up slowly and the rate of the change is not the same in different segments of the coasts. In a few segments, the sea level is even relatively going down. The numerical results given in this paper provide a basis for the predictions of the future sea level changes and their effects.