The synthesis of methacrylic acid from biomass-derived itaconic acid is a green route,for it can get rid of the dependence on fossil resource.In order to solve the problems on this route such as use of a preciousmetal...The synthesis of methacrylic acid from biomass-derived itaconic acid is a green route,for it can get rid of the dependence on fossil resource.In order to solve the problems on this route such as use of a preciousmetal catalyst and a corrosive homogeneous alkali,we prepared a series of hydroxyapatite catalysts by an ionic liquid-assisted hydrothermal method and evaluated their catalytic performance.The results showed that the ionic liquid[Bmim]BF_(4) can affect the crystal growth of hydroxyapatite,provide fluoride ion for fluorination of hydroxyapatite,and adjust the surface acidity and basicity,morphology,textural properties,crystallinity,and composition of hydroxyapatite.The[Bmim]BF4 dosage and hydrothermal temperature can affect the fluoride ion concentration in the hydrothermal system,thus changing the degree of fluoridation of hydroxyapatite.High fluoride-ion concentration can lead to the formation of CaF_(2) and thus significantly decrease the catalytic performance of hydroxyapatite.The hydrothermal time mainly affects the growth of hydroxyapatite crystals on the c axis,leading to different catalytic performance.The suitable conditions for the preparation of this fluoridized hydroxyapatite are as follows:a mass ratio of[Bmim]BF4 to calcium salt=0.2:1,a hydrothermal time of 12 h,and a hydrothermal temperature of 130℃.A maximal methacrylic acid yield of 54.7%was obtained using the fluoridized hydroxyapatite under relatively mild reaction conditions(250℃ and 2 MPa of N_(2))in the absence of a precious-metal catalyst and a corrosive homogeneous alkali.展开更多
The deoxygenation of organic acids, important biomass feedstocks and derivatives, to synthesize hydrocarbon products under mild electrochemical conditions, holds significant importance for the production of carbon-neu...The deoxygenation of organic acids, important biomass feedstocks and derivatives, to synthesize hydrocarbon products under mild electrochemical conditions, holds significant importance for the production of carbon-neutral biofuels. There is still limited research on the influential factors of the electrochemical decarboxylation reaction of medium-chain fatty acids. In this study, n-octanoic acid (OA) was chosen as the research subject to investigate the electrochemical decarboxylation behavior of OA on a platinum electrode, focusing on the influence of different alkali metal cations (Li^(+), Na^(+), K^(+)), common anions (SO^(4)^(2−), Cl^(−)), and electrolyte pH. It was found that KOH as an electrolyte exhibited the best performance for OA. Possibly, the larger size of K^(+) increased the alkalinity of the electrode surface, facilitating OA deprotonation. LiOH electrolyte reduced the solubility of OA, thereby inhibiting the decarboxylation reaction. SO^(4)^(2−) exhibited a weak promoting effect on the decarboxylation reaction of OA, while Cl^(−) showed no adverse effect although Cl^(−) may adsorb on the electrode surface. Furthermore, unlike short-chain fatty acids, medium-chain OA can only achieve efficient decarboxylation under alkaline conditions due to its solubility properties. This study provides references and foundations for future efforts to enhance the efficiency of electrochemical decarboxylation synthesis of hydrocarbon biofuels from medium-chain fatty acids.展开更多
Methacrylic acid,an important organic chemical,is commercially manufactured starting from fossil feedstock.The decarboxylation of itaconic acid derived for biomass is a green route to the synthesis of methacrylic acid...Methacrylic acid,an important organic chemical,is commercially manufactured starting from fossil feedstock.The decarboxylation of itaconic acid derived for biomass is a green route to the synthesis of methacrylic acid.In view of the problems existing in the researches on this route such as use of noble metal catalyst,harsh reaction conditions and low desired-product yield,we prepared a series of hydroxyapatite catalysts with different Ca/P molar ratios and evaluated their catalytic performance.The results showed that the hydroxyapatite catalyst with a Ca/P molar ratio of 1.58 had the best catalytic activity.The highest yield of MAA up to 61.2%was achieved with basically complete conversion of itaconic acid under the suitable reaction conditions of 1 equivalent of NaOH,2 MPa of N_(2),250℃,and 2 h.On this basis,a reaction network for the decarboxylation of itaconic acid to methacrylic acid catalyzed by hydroxyapatite was established.With the aid of catalyst characterization using X-ray powder diffraction,NH3/CO2 temperature-programmed desorption,N_(2)physisorption,inductively coupled plasma optical emission spectrometry,and scanning electron microscopy,we found that the distribution of surface acid sites and basic sites,crystal growth orientation,texture properties and morphology of hydroxyapatite varied with the Ca/P molar ratio.Furthermore,the change of the crystal growth orientation and its influence on the surface acidity and alkalinity were clarified.展开更多
基金supported by National Natural Science Foundation of China(21978066)Basic Research Program of Hebei Province for Natural Science Foundation and Key Basic Research Project(18964308D)the Key Program of Natural Science Foundation of Hebei Province(B2020202048).
文摘The synthesis of methacrylic acid from biomass-derived itaconic acid is a green route,for it can get rid of the dependence on fossil resource.In order to solve the problems on this route such as use of a preciousmetal catalyst and a corrosive homogeneous alkali,we prepared a series of hydroxyapatite catalysts by an ionic liquid-assisted hydrothermal method and evaluated their catalytic performance.The results showed that the ionic liquid[Bmim]BF_(4) can affect the crystal growth of hydroxyapatite,provide fluoride ion for fluorination of hydroxyapatite,and adjust the surface acidity and basicity,morphology,textural properties,crystallinity,and composition of hydroxyapatite.The[Bmim]BF4 dosage and hydrothermal temperature can affect the fluoride ion concentration in the hydrothermal system,thus changing the degree of fluoridation of hydroxyapatite.High fluoride-ion concentration can lead to the formation of CaF_(2) and thus significantly decrease the catalytic performance of hydroxyapatite.The hydrothermal time mainly affects the growth of hydroxyapatite crystals on the c axis,leading to different catalytic performance.The suitable conditions for the preparation of this fluoridized hydroxyapatite are as follows:a mass ratio of[Bmim]BF4 to calcium salt=0.2:1,a hydrothermal time of 12 h,and a hydrothermal temperature of 130℃.A maximal methacrylic acid yield of 54.7%was obtained using the fluoridized hydroxyapatite under relatively mild reaction conditions(250℃ and 2 MPa of N_(2))in the absence of a precious-metal catalyst and a corrosive homogeneous alkali.
基金The authors gratefully acknowledge the financial support from Shanghai Pujiang Program(20PJ1404800)“Scientific and Technical Innovation Action Plan”Basic Research Field of Shanghai Science and Technology Committee(19JC1410500).
文摘The deoxygenation of organic acids, important biomass feedstocks and derivatives, to synthesize hydrocarbon products under mild electrochemical conditions, holds significant importance for the production of carbon-neutral biofuels. There is still limited research on the influential factors of the electrochemical decarboxylation reaction of medium-chain fatty acids. In this study, n-octanoic acid (OA) was chosen as the research subject to investigate the electrochemical decarboxylation behavior of OA on a platinum electrode, focusing on the influence of different alkali metal cations (Li^(+), Na^(+), K^(+)), common anions (SO^(4)^(2−), Cl^(−)), and electrolyte pH. It was found that KOH as an electrolyte exhibited the best performance for OA. Possibly, the larger size of K^(+) increased the alkalinity of the electrode surface, facilitating OA deprotonation. LiOH electrolyte reduced the solubility of OA, thereby inhibiting the decarboxylation reaction. SO^(4)^(2−) exhibited a weak promoting effect on the decarboxylation reaction of OA, while Cl^(−) showed no adverse effect although Cl^(−) may adsorb on the electrode surface. Furthermore, unlike short-chain fatty acids, medium-chain OA can only achieve efficient decarboxylation under alkaline conditions due to its solubility properties. This study provides references and foundations for future efforts to enhance the efficiency of electrochemical decarboxylation synthesis of hydrocarbon biofuels from medium-chain fatty acids.
基金supported by the National Natural Science Foundation of China(Grant No.21978066)Basic Research Program of Hebei Province for Natural Science Foundation and Key Basic Research Project(Grant No.18964308D)the Key Program of Natural Science Foundation of Hebei Province(Grant No.B2020202048).
文摘Methacrylic acid,an important organic chemical,is commercially manufactured starting from fossil feedstock.The decarboxylation of itaconic acid derived for biomass is a green route to the synthesis of methacrylic acid.In view of the problems existing in the researches on this route such as use of noble metal catalyst,harsh reaction conditions and low desired-product yield,we prepared a series of hydroxyapatite catalysts with different Ca/P molar ratios and evaluated their catalytic performance.The results showed that the hydroxyapatite catalyst with a Ca/P molar ratio of 1.58 had the best catalytic activity.The highest yield of MAA up to 61.2%was achieved with basically complete conversion of itaconic acid under the suitable reaction conditions of 1 equivalent of NaOH,2 MPa of N_(2),250℃,and 2 h.On this basis,a reaction network for the decarboxylation of itaconic acid to methacrylic acid catalyzed by hydroxyapatite was established.With the aid of catalyst characterization using X-ray powder diffraction,NH3/CO2 temperature-programmed desorption,N_(2)physisorption,inductively coupled plasma optical emission spectrometry,and scanning electron microscopy,we found that the distribution of surface acid sites and basic sites,crystal growth orientation,texture properties and morphology of hydroxyapatite varied with the Ca/P molar ratio.Furthermore,the change of the crystal growth orientation and its influence on the surface acidity and alkalinity were clarified.
