Rolling Decision Model of Thermal Power Retrofit and Generation Expansion Planning Considering Carbon Emissions and Power Balance Risk

With the increasing urgency of the carbon emission reduction task,the generation expansion planning process needs to add carbon emission risk constraints,in addition to considering the level of power adequacy.However,methods for quantifying and assessing carbon emissions and operational risks are lacking.It results in excessive carbon emissions and frequent load-shedding on some days,although meeting annual carbon emission reduction targets.First,in response to the above problems,carbon emission and power balance risk assessment indicators and assessment methods,were proposed to quantify electricity abundance and carbon emission risk level of power planning scenarios,considering power supply regulation and renewable energy fluctuation characteristics.Secondly,building on traditional two-tier models for low-carbon power planning,including investment decisions and operational simulations,considering carbon emissions and power balance risks in lower-tier operational simulations,a two-tier rolling model for thermal power retrofit and generation expansion planning was established.The model includes an investment tier and operation assessment tier and makes year-by-year decisions on the number of thermal power units to be retrofitted and the type and capacity of units to be commissioned.Finally,the rationality and validity of the model were verified through an example analysis,a small-scale power supply system in a certain region is taken as an example.The model can significantly reduce the number of days of carbon emissions risk and ensure that the power balance risk is within the safe limit.

Increasing the Efficiency and Level of Environmental Safety of Pro-Environmental City Heat Supply Technologies by Low Power Nuclear Plants

In connection with the current prospect of decarbonization of coal energy through the use of small nuclear power plants (SNPPs) at existing TPPs as heat sources for heat supply to municipal heating networks, there is a technological need to improve heat supply schemes to increase their environmental friendliness and efficiency. The paper proves the feasibility of using the heat-feeding mode of ASHPs for urban heat supply by heating the network water with steam taken from the turbine. The ratio of electric and thermal power of a “nuclear” combined heat and power plant is given. The advantage of using a heat pump, which provides twice as much electrical power with the same heat output, is established. Taking into account that heat in these modes is supplied with different potential, the energy efficiency was used to compare these options. To increase the heat supply capacity, a scheme with the use of a high-pressure heater in the backpressure mode and with the heating of network water with hot steam was proposed. Heat supply from ASHPs is efficient and environmentally friendly even in the case of significant remoteness of heat consumers.

Preparation and Characterization of Andalusite Ceramic Used for Solar Thermal Power Generation

High-temperature thermal storage material is one of the critical materials of solar thermal power generation system. Andalusite, kaolin, talc, γ-Al2O3 and partially stabilized zireonia were used as the raw materials, and in-situ synthesis of cordierite was adopted to fabricate thermal storage material for solar thermal power generation via pressureless sintering. The phase compositions, microstructures and thermal shock resistances of the sintered samples were analyzed by XRD, SEM and EDS, and the corresponding mechanical properties were measured. The results show that the major phases of the samples are mullite and zirconium silicate, and the pores distribute uniformly. After being sintered at 1 460℃C, A4 sample exhibits a better mechanical performance and thermal shock resistance, its loss rate of bending strength after 30 cycles thermal shock is 3.04%, the bulk density and bending strength are 2.86 g.cm^-3 and 139.66 MPa, respectively. The better thermal shock resistance of the sample is closely related to the effect of zirconium silicate, such as its uniform distribution, nested growth with mullite, low thermal expansion coefficient, high thermal conductivity, etc. This ceramic can be widely used as one of potential thermal storage materials of solar thermal power generation system.

Performance on Power,Hot and Cold Water Generation of a Hybrid Photovoltaic Thermal Module

This paper proposed a new function of photovoltaic thermal(PVT)module to produce nocturnal cool water not just only generating electrical power and hot water during daytime.Experimental tests were carried out under Chiang Mai tropical climate with a 200 Wp monocrystalline PVT module having dimensions of 1.601 m×0.828 m connected with two water tanks each of 60 L taken for hot and cool water storages.The module was facing south with 18o inclination.The electrical load was a 200 W halogen lamp.From experiments,by taking the module as a nocturnal radiative cooling surface,the cool water temperature in the cool storage tank could be reduced 2℃–3℃each night and the temperature could be reduced from 31.5℃to 22.1℃within 4 consecutive days.The cool water at approximately 23℃was also used to cool down the PVT module from noon when the PVT module temperature was rather high,and then the module temperature immediately dropped around 5℃and approximately 10%increase of electrical power could be achieved.A set of mathematical models was also developed to predict the PVT module temperature and the hot water temperature including the cool water temperature in the storage tanks during daytime and nighttime.The simulated results agreed well with the experimental data.

In-Situ Preparation and Thermal Shock Resistance of Mullite-Cordierite Heat Tube Material for Solar Thermal Power

In order to improve the thermal shock resistance of solar thermal heat transfer tube material, the mullite-cordierite composite ceramic as solar thermal heat transfer tube material were fabricated by pressureless sintering using a-Al203, Suzhou kaolin, talc, and feldspar as starting materials. The important parameter for solar thermal transfer tube such as water absorption （W）, bulk density （Db）, and the mechanical properties were investigated. The phase composition and microstructure of the composite ceramics were analyzed by XRD and SEM. The experimental results show that the B3 sintered at 1 300 ℃ and holding for 3 h has an optimum thermal shock resistance. The bending strength loss rate of B3 is only 2% at 1 100℃ by air quenching-strength test and the sample can endure 30 times thermal shock cycling, and the water absorption, the bulk density and the bending strength are 0.32%, 2.58 g·cm-3, and 125.59 MPa respectively. The XRD analysis indicated that the phase compositions of the sample were mullite, cordierite, corundum, and spinel. The SEM images illustrate that the cordierite is prismatic grain and the mullite is nano rod, showing a good thermal shock resistance for composite ceramics as potential solar thermal power material.

Current Situation of China's Thermal Power Generation Equipment & Its Development Perspective

1. The present manufacturing situation of China’s thermal power generation equipment By the year 1995. development of China’s electric power industry has experienced a course of a hundred years. Over a period of the initial 50 years. China’s development of electric power was slow. At the time of 1949, the total installed capacity in China was 1,850 MW and the electricity generated was only 4.3 billion kWh. During the past 46 years after 1949, her

Optimization of solar thermal power station LCOE based on NSGA-Ⅱ algorithm

In view of the high cost of solar thermal power generation in China,it is difficult to realize large-scale production in engineering and industrialization.Non-dominated sorting genetic algorithm II(NSGA-II)is applied to optimize the levelling cost of energy(LCOE)of the solar thermal power generation system in this paper.Firstly,the capacity and generation cost of the solar thermal power generation system are modeled according to the data of several sets of solar thermal power stations which have been put into production abroad.Secondly,the NSGA-II genetic algorithm and particle swarm algorithm are applied to the optimization of the solar thermal power station LCOE respectively.Finally,for the linear Fresnel solar thermal power system,the simulation experiments are conducted to analyze the effects of different solar energy generation capacities,different heat transfer mediums and loan interest rates on the generation price.The results show that due to the existence of scale effect,the greater the capacity of the power station,the lower the cost of leveling and electricity,and the influence of the types of heat storage medium and the loan on the cost of leveling electricity are relatively high.

Assessment of CDM Activities by a Generation Planning Model of the Chinese Power Grids

A generation planning model of six main power grids in China is developed to evaluate the potential of advanced power generation technologies into the Chinese power system as CDM （clean development mechanism）. It is investigated how delivered coal price, on-grid power price, and environmental protection may influence the potential of advanced thermal power generation as CDM projects. One finding from the baseline analysis is that coal price, on-grid power price, and environmental protection policy have only a small significance to the grid-wide specific CO2 emissions of thermal power generation up to the year 2026, while the best thermal generation mix is influenced largely by environmental protection policy. And it is found that not only the price of CER （certified emission reduction） and the length of crediting period but also on-grid power price and the reduction of air pollutants in the baseline have a significant influence on the potential of the CDM activities.

Consideration of Environmental Effect of Power Generation: Bangladesh Perspective

Nowadays for power generation, environment is a major consideration. The heart of power generation is power station. At present there are almost above 40(Both Government & Rental) power station in Bangladesh. Among these 80% of power station is gas based. Rest of the 20% is coal, liquid and furnace oil based. Bangladesh has only one Hydraulic power station. These gas and coal based power stations are giving adverse effect in Bangladesh. The main emissions from coal combustion at thermal power plants are carbon dioxide (CO), nitrogen oxides (NO), sulfur oxides (SO), chlorofluorocarbons (CFCs), and air- borne inorganic particles such as fly ash, soot, and other trace gas species. Carbon dioxide, methane, and chlorofluorocarbons are greenhouse gases. These emissions are considered to be responsible for heating up the atmosphere, producing a harmful global environment. It is known to all that hydro power station is a clean source of energy, but it has also some ecological and environmental effect. Dhaka is one of the top polluted city in the world. So for power generation if the environmental effect is not considered then Bangladesh will be in great trouble. The purpose of this paper is to discuss the present and future possible environmental effect of power generation in Bangladesh.

Proposal of a Solar Thermal Power Plant at Low Temperature Using Solar Thermal Collectors

To this day, only two types of solar power plants have been proposed and built: high temperature thermal solar one and photovoltaic one. It is here proposed a new type of solar thermal plant using glass-top flat surface solar collectors, so working at low temperature (i.e., below 100°C). This power plant is aimed at warm countries, i.e., the ones mainly located between -40° and 40° latitude, having available space along their coast. This land based plant, to install on the seashore, is technologically similar to the one used for OTEC (Ocean Thermal Energy Conversion). This plant, apart from supplying electricity with a much better thermodynamic efficiency than OTEC plants, has the main advantage of providing desalinated water for drinking and irrigation. This plant is designed to generate electricity (and desalinated water) night and day and all year round, by means of hot water storage, with just a variation of the power delivered depending on the season.

Thermo-Dynamical Analysis on Electricity-Generation Subsystem of CAES Power Plant

Besides pumped hydropower, Compressed Air Energy Storage (CAES) is the other solution for large energy storage capacity. It can balance fluctuations in supply and demand of electricity. CAES is essential part of smart power grids. Linked with the flow structure and dynamic characteristic of electricity generation subsystem and its components, a simulation model is proposed. Thermo-dynamical performance on off-design conditions have been analyzed with constant air mass flux and constant gas combustion temperature. Some simulation diagrams of curve are plotted too. The contrast of varied operation mode thermal performance is made between CAES power plant and simple gas turbine power plant.

APRICING METHOD of SURPLUS THERMAL POWER EXCHANGE BETWEEN GRIDS

This paper presents a case study on surplus thermal power being exchange between power grids and associate prices. The analysis shows the potential value of surplus thermal power exchange between grids under the condition whatever a grid is excessive or short in capacity.

Operation Strategy Analysis and Configuration Optimization of Solar CCHP System

This paper proposed a new type of combined cooling heating and power(CCHP)system,including the parabolic trough solar thermal(PTST)power generation and gas turbine power generation.The thermal energy storage subsystem in the PTST unit provides both thermal energy and electrical energy.Based on the life cycle method,the configuration optimization under eight operation strategies is studied with the economy,energy,and environment indicators.The eight operation strategies include FEL,FEL-EC,FEL-TES,FEL-TES&EC,FTL,FTL-EC,FTL-TES,and FTL-TES&EC.The feasibility of each strategy is verified by taking a residential building cluster as an example.The indicators under the optimal configuration of each strategy are compared with that of the separate production(SP)system.The results showed that the PTST-CCHP system improves the environment and energy performance by changing the ratio of thermal energy and electric energy.The environment and energy indicators of FEL-TES&EC are superior to those of FTL-TES&EC in summer,and the results are just the opposite in winter.The initial annual investment of the PTST-CCHP system is higher than that of the SP system,but its economic performance is better than that of the SP system with the increase of life-cycle.

Including Co-benefits in the CDM of the Power Sector： A Case Study for India

This study examines the effects of the inclusion of co-benefits on the potential capacity of advanced thermal plants with a linear programming model in the CDM （clean development mechanism） in India＇s power sector. It investigates how different marginal damage costs of air pollutants affect the potential capacity of NGCC （natural gas combined cycle） and IGCC （integrated gasification combined cycle） by CDM projects with a scenario analysis. Three results are found from this analysis. First, IGCC and NGCC are installed at lower CER （certified emission reductions） prices when the marginal damage costs of air pollutants are added to the CER prices. Second, the CER prices of $1/tCO2 correspond with the sum of marginal damage costs of air pollutants of $150/t for NGCC and $30/t for IGCC in India＇s power sector. Thus, including the co-benefits into CDM attracts developing countries such as India where coal resource is redundant. Third, the SOx and NOx reduction benefits attained from the CDM projects become large in a grid where IGCC is installed.

SMO Algorithm to Unravel CEED Problem using Wind and Solar

This research proposes a more advanced way to address Combined Economic Emission Dispatch(CEED)concerns.Economic Load Dispatch(ELD)and Economic Emission Dispatch(EED)have been implemented to reduce generating unit fuel costs and emissions.When both economics and emission tar-gets are taken into account,the dispatch of an aggregate cost-effective emission challenge emerges.This research affords a mathematical modeling-based analyti-cal technique for solving economic,emission,and collaborative economic and emission dispatch problems with only one goal.This study takes into account both the fuel cost target and the environmental impact of emissions.This bi-inten-tion CEED problem is converted to a solitary goal function using a price penalty factor technique.In this case,a metaheuristic and an environment-inspired,intel-ligent Spider Monkey Optimization technique(SMO)are used to address the CEED dilemma.By following the generator’s scheduling process,the SMO meth-od is used to regulate the output from the power generation system in terms of pollution and fuel cost.The Fission-Fusion social(FFS)structure of spider mon-keys promotes them to utilize a global optimization method known as SMO dur-ing foraging behaviour.The emphasis is mostly on lowering the cost of generation and pollution in order to improve the efficiency of the power system and han-dle dispatch problems with constraints.The economic dispatch has been reme-died,and the improved result demonstrates that the system’s performance is stable andflexible in real time.Finally,the system’s output demonstrates that the system has improved in resolving CEED difficulties.When compared to ear-lier investigations,the proposed model’sfindings have improved.As the gener-ating units,wind and solar are used to explore the CEED crisis in the IEEE 30 bus system.

Power generation and heat sink improvement characteristics of recooling cycle for thermal cracked hydrocarbon fueled scramjet

In order to further investigate how much fuel heat sink could be increased and how much power generation could be obtained by using recooling cycle for a regeneratively cooled scramjet,the energy conversion from heat to electricity and the fuel heat sink increase in recooling cycle are experimentally investigated for fuel conversion rate and components of gas cracked fuel products at different fuel temperatures.The results indicate that the total fuel heat sink(i.e.,physical+chemical+recooling) of a recooling cycle is obviously higher than the heat sink of fuel itself,and the maximum heat sink increment is as high as 0.4 MJ/kg throughout the recooling cycle.Furthermore,the cracked fuel mixture has a significant capacity of doing work.The thermodynamic power generation scheme,which adopts the cracked fuel gas mixture as the working fluid,is a potential power generation cycle,and the maximum specific power generation is about 500 kW/kg.Turbine-pump scheme using cracked fuel gas mixture is also a potential fuel feeding cycle.

深度调峰背景下火电机组热电解耦技术路径对比分析

新能源发电在出力和发电负荷上具有波动大、不稳定的特点,为解决新能源机组上网后带来的上述问题,利用多种热电解耦方式对火电机组进行改造,并对不同技术路径进行对比分析,探究火电机组解耦潜力与调峰能力。采用EBSILON Professional软件进行模拟仿真,对不同热电解耦方案下调峰负荷空间进行评估和对比分析。计算结果表明,低压缸零出力热电解耦改造方案可以使机组的调峰能力得到最大的改善。在原最大供热负荷304.60 MW下,最小发电量下降172.21 MW,最低电负荷率下降32.70%。火电机组经过热电解耦改造可显著提高热电机组与新能源机组的协调调峰能力,提高发电单元整体发电的稳定性。

多类型小容量火电机组热电解耦潜力与经济性对比评估

【目的】新能源发电存在输出功率和发电负荷的大幅波动和不稳定性问题,对电力系统稳定运行造成一定挑战。小容量火电机组热电解耦后参与电力系统整体运行,可提高电网调度效率与系统安全性,为此,采取多种热电解耦技术对3台小容量火电机组进行改造,并对各种技术路线进行了比较研究。【方法】通过使用EBSILON Professional软件进行模拟实验,对各种热电解耦方案在调峰负荷方面的潜力进行了评估和对比分析,并对改造后的经济性进行分析。【结果】水冷背压式机组热电解耦潜力空间较大,较其他机组有着明显优势,热泵改造机组最大供热下日利润提高217.18万元。随着抽汽热负荷变化,水冷凝汽式机组热电解耦潜力变化整体趋势平缓,最易控制,热泵改造机组最大供热下日利润提高202.25万元。空冷凝汽式机组热泵改造最大供热下日利润提高26.13万元。【结论】经过热电解耦升级的火电机组,能够大幅增强其调峰效果,热泵改造能有效提高日利润,从而提升整个发电系统的稳定性和发电效率。

Numerical Study on Heat Transfer and Frictional Resistance of Two Types of Molten Salts in Straight Channels and Supercritical Carbon Dioxide in Airfoil Channels

Molten salt and supercritical carbon dioxide(sCO_(2))are considered to be one of the most promising combined heat transfer refrigerants for third-generation solar thermal power generation.To evaluate the potential of chloride salts and carbonates in third-generation solar thermal power generation,this paper uses molten salts and sCO_(2)as the working media of printed circuit board heat exchangers(PCHE),and uses numerical simulation to study the heat transfer and friction of PCHE channels with different molten salts and sCO_(2),and establishes predictive correlations respectively.A local heat transfer and friction study was conducted on the sCO_(2)side of the airfoil channel,and it was found that the inlet mass flow rate has a significant impact on it,while the inlet temperature has a relatively small impact.A comprehensive comparison was made between the heat transfer and friction of two molten salts,and the comprehensive performance of chloride salts was 70%-80%higher than that of carbonates.The results indicate that the potential of chloride salts in third-generation solar thermal power generation is much greater than that of carbonates.

电热综合能源系统稳态与区间潮流计算快速解耦新方法

综合能源系统稳态潮流计算是后续规划、运行等研究的基础。目前常采用的牛顿-拉夫逊法存在数值稳定性问题,且随着综合能源系统不确定因素增加,研究系统的区间潮流以实现综合能源系统的安全分析和评估变得越来越重要。首先,基于泰勒函数一阶展开和二阶展开,推导出热负荷流量和节点温度的解析表达式,该表达式实现了流量与温度的独立求解,无须解方程组即可得到系统稳态潮流。然后,分析流量和温度表达式的函数单调性,结合各热负荷值,确定了热负荷流量和热负荷节点温度的区间潮流解,所提方法在保证计算精度的同时,计算速度快且不存在数值稳定性问题。最后,通过算例分析验证了所提方法的有效性。