To create a new prediction model, the unbiased GM （1,1） model is optimized by the five-point slide method in this paper. Then, based on the occurrence areas of dce blast in Enshi District during 1995 -2004, the new ...To create a new prediction model, the unbiased GM （1,1） model is optimized by the five-point slide method in this paper. Then, based on the occurrence areas of dce blast in Enshi District during 1995 -2004, the new model and unbiased GM （1, 1 ） model are applied to predict the occurrence areas of rice blast during 2005 -2010. Predicting outcomes show that the prediction accuracy of five-point unbiased sliding optimized GM （1, 1 ） model is higher than the unbiased GM （1,1） model. Finally, combined with the prediction results, the author provides some suggestion for Enshi District in the prevention and control of rice blast in 2010.展开更多
Three-dimensional rock fracture induced by blasting is a highly complex problem and has received considerable attention in geotechnical engineering.The material point method is firstly applied to treat this challengin...Three-dimensional rock fracture induced by blasting is a highly complex problem and has received considerable attention in geotechnical engineering.The material point method is firstly applied to treat this challenging task.Some inherent weaknesses can be overcome by coupling the generalized interpolation material point(GIMP)and the convected particle domain interpolation technique(CPDI).For the media in the borehole,unchanged GIMP-type particles are used to guarantee a homogenous blast pressure.CPDITetrahedron type particles are employed to avoid the fake numerical fracture near the borehole for the rock material.A blasting experiment using three-dimensional single-borehole rock was simulated to examine the applicability of the coupled model under realistic loading and boundary conditions.A good agreement was achieved between the simulation and experimental results.Moreover,the mechanism of three-dimensional rock fracture was analyzed.It was concluded that rock particle size and material parameters play an important role in rock damage.The reflected tensile waves cause severe damage in the lower part of the model.Rayleigh waves occur on the top face of the rock model to induce a hoop failure band.展开更多
Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field exper...Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field experiments and a systematic numerical analysis were conducted.A high-fidelity finite element model developed using AUTODYN was first validated using blast data collected from field tests conducted in this and previous studies.A quantitative analysis was then performed to determine the influence of the charge shape,aspect ratio(length to diameter),orientation,and detonation configuration on the characteristics and distributions of the blast loading(incident peak overpressure and impulse)according to scaled distance.The results revealed that the secondary peak overpressure generated by a cylindrical charge was mainly distributed along the axial direction and was smaller than the overpressure generated by an equivalent spherical charge.The effects of charge shape on the blast loading at 45°and 67.5°in the axial plane could be neglected at scaled distances greater than 2 m/kg^(1/3);the effect of aspect ratios greater than 2 on the peak overpressure in the 90°(radial)direction could be neglected at all scaled distances;and double-end detonation increased the radial blast loading by up to 60%compared to singleend detonation.Finally,an empirical cylindrical charge blast loading model was developed considering the influences of charge aspect ratio,orientation,and detonation configuration.The results obtained in this study can serve as a reference for the design of blast tests using cylindrical charges and aid engineers in the design of blast-resistant structures.展开更多
基金Supported by Science Research Project of Department of Education of Hubei Province (B20092901)~~
文摘To create a new prediction model, the unbiased GM （1,1） model is optimized by the five-point slide method in this paper. Then, based on the occurrence areas of dce blast in Enshi District during 1995 -2004, the new model and unbiased GM （1, 1 ） model are applied to predict the occurrence areas of rice blast during 2005 -2010. Predicting outcomes show that the prediction accuracy of five-point unbiased sliding optimized GM （1, 1 ） model is higher than the unbiased GM （1,1） model. Finally, combined with the prediction results, the author provides some suggestion for Enshi District in the prevention and control of rice blast in 2010.
基金This research was funded by the Natural Science Foundation of Sichuan,China(No.2022NSFSC1915)the National Natural Science Foundation of China(No.U19A2098)+1 种基金State Key Laboratory of Precision Blasting and Hubei Key Laboratory of Blasting Engineering,Jianghan University(No.PBSKL2022B06)the Fundamental Research Funds for the Central Universities。
文摘Three-dimensional rock fracture induced by blasting is a highly complex problem and has received considerable attention in geotechnical engineering.The material point method is firstly applied to treat this challenging task.Some inherent weaknesses can be overcome by coupling the generalized interpolation material point(GIMP)and the convected particle domain interpolation technique(CPDI).For the media in the borehole,unchanged GIMP-type particles are used to guarantee a homogenous blast pressure.CPDITetrahedron type particles are employed to avoid the fake numerical fracture near the borehole for the rock material.A blasting experiment using three-dimensional single-borehole rock was simulated to examine the applicability of the coupled model under realistic loading and boundary conditions.A good agreement was achieved between the simulation and experimental results.Moreover,the mechanism of three-dimensional rock fracture was analyzed.It was concluded that rock particle size and material parameters play an important role in rock damage.The reflected tensile waves cause severe damage in the lower part of the model.Rayleigh waves occur on the top face of the rock model to induce a hoop failure band.
基金supported by the National Natural Science Foundation of China[No.51978166]。
文摘Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field experiments and a systematic numerical analysis were conducted.A high-fidelity finite element model developed using AUTODYN was first validated using blast data collected from field tests conducted in this and previous studies.A quantitative analysis was then performed to determine the influence of the charge shape,aspect ratio(length to diameter),orientation,and detonation configuration on the characteristics and distributions of the blast loading(incident peak overpressure and impulse)according to scaled distance.The results revealed that the secondary peak overpressure generated by a cylindrical charge was mainly distributed along the axial direction and was smaller than the overpressure generated by an equivalent spherical charge.The effects of charge shape on the blast loading at 45°and 67.5°in the axial plane could be neglected at scaled distances greater than 2 m/kg^(1/3);the effect of aspect ratios greater than 2 on the peak overpressure in the 90°(radial)direction could be neglected at all scaled distances;and double-end detonation increased the radial blast loading by up to 60%compared to singleend detonation.Finally,an empirical cylindrical charge blast loading model was developed considering the influences of charge aspect ratio,orientation,and detonation configuration.The results obtained in this study can serve as a reference for the design of blast tests using cylindrical charges and aid engineers in the design of blast-resistant structures.
