This scientific paper presents a study investigating the effects of defects at the CdS/CIGS and CdS/SDL interfaces on the performance of CIGS solar cells. The objective of this study is to analyze the influence of def...This scientific paper presents a study investigating the effects of defects at the CdS/CIGS and CdS/SDL interfaces on the performance of CIGS solar cells. The objective of this study is to analyze the influence of defects at the interface between the CdS buffer layer and the CIGS absorber, as well as the surface defect layer (SDL), on CIGS solar cell performance. The study explores three key aspects: the impact of the conduction band offset (CBO) at the CdS/CIGS interface, the effects of interface defects and defect density on performance, and the combined influence of CBO and defect density at the CdS/ SDL and SDL/CIGS interfaces. For interface defects not exceeding 10<sup>13</sup> cm<sup>-2</sup>, we obtained a good efficiency of 22.9% when -0.1 eV analyzing the quality of CdS/SDL and SDL/CIGS junctions, it appears that defects at the SDL/CIGS interface have very little impact on the performances of the CIGS solar cell. By optimizing the electrical parameters of the CdS/SDL interface defects, we achieved a conversion efficiency of 23.1% when -0.05 eV < CBO < 0.05 eV.展开更多
层状无机材料的弱层间耦合和大面积表面为构建低导热性无机固体材料提供了基本框架.合成具有足够散射和非谐波性的稳定层状材料,从而降低热导率,仍是一项挑战.本文在层状无机FeOCl材料体系中,通过一步氧化还原反应成功获得了一种结构稳...层状无机材料的弱层间耦合和大面积表面为构建低导热性无机固体材料提供了基本框架.合成具有足够散射和非谐波性的稳定层状材料,从而降低热导率,仍是一项挑战.本文在层状无机FeOCl材料体系中,通过一步氧化还原反应成功获得了一种结构稳定的富含Fe^(2+)的层状材料,实现了表面和界面的同步改性,并实现了超低的热导率.具体而言,系统的X射线吸收精细结构(XAFS)分析和电子能量损失光谱(EELS)分析表明,碱金属原子的层间插层和表面缺陷的引入诱导了大量Fe^(2+)的存在,从而增强了其非谐波性和声子散射.此外,声子态密度(PDOS)分布也提供了确凿的证据,证明了散射概率的提高和声子模式整体的软化.所制得的层状无机材料Fe(III)_(1−n)Fe(II)_(n)O_(1−x)Cl[K^(+)]_(m)不仅结构稳定,而且在298 K时的热导率比原始FeOCl降低了近60%,低至0.29 W m^(−1) K^(−1),这在层状无机材料中是极低的.这项研究为低导热层状材料的设计提供了新的视角.展开更多
文摘This scientific paper presents a study investigating the effects of defects at the CdS/CIGS and CdS/SDL interfaces on the performance of CIGS solar cells. The objective of this study is to analyze the influence of defects at the interface between the CdS buffer layer and the CIGS absorber, as well as the surface defect layer (SDL), on CIGS solar cell performance. The study explores three key aspects: the impact of the conduction band offset (CBO) at the CdS/CIGS interface, the effects of interface defects and defect density on performance, and the combined influence of CBO and defect density at the CdS/ SDL and SDL/CIGS interfaces. For interface defects not exceeding 10<sup>13</sup> cm<sup>-2</sup>, we obtained a good efficiency of 22.9% when -0.1 eV analyzing the quality of CdS/SDL and SDL/CIGS junctions, it appears that defects at the SDL/CIGS interface have very little impact on the performances of the CIGS solar cell. By optimizing the electrical parameters of the CdS/SDL interface defects, we achieved a conversion efficiency of 23.1% when -0.05 eV < CBO < 0.05 eV.
基金supported by the Chinese Academy of Sciences(CAS)Project for Young Scientists in Basic Research(YSBR-070)the National Natural Science Foundation of China(21925110,22321001 and 12147105)+5 种基金the USTC Research Funds of the Double FirstClass Initiative(YD2060002004)the National Key Research and Development Program of China(2022YFA1203600)the Anhui Provincial Key Research and Development Project(202004a050200760)the Key R&D Program of Shandong Province(2021CXGC010302)the Fellowship of China Postdoctoral Science Foundation(2022M710141)the Open Foundation of the Key Lab(Center)of Engineering Research Center of Building Energy Efficiency Control and Evaluation,Ministry of Education(AHJZNX-2023-04).
文摘层状无机材料的弱层间耦合和大面积表面为构建低导热性无机固体材料提供了基本框架.合成具有足够散射和非谐波性的稳定层状材料,从而降低热导率,仍是一项挑战.本文在层状无机FeOCl材料体系中,通过一步氧化还原反应成功获得了一种结构稳定的富含Fe^(2+)的层状材料,实现了表面和界面的同步改性,并实现了超低的热导率.具体而言,系统的X射线吸收精细结构(XAFS)分析和电子能量损失光谱(EELS)分析表明,碱金属原子的层间插层和表面缺陷的引入诱导了大量Fe^(2+)的存在,从而增强了其非谐波性和声子散射.此外,声子态密度(PDOS)分布也提供了确凿的证据,证明了散射概率的提高和声子模式整体的软化.所制得的层状无机材料Fe(III)_(1−n)Fe(II)_(n)O_(1−x)Cl[K^(+)]_(m)不仅结构稳定,而且在298 K时的热导率比原始FeOCl降低了近60%,低至0.29 W m^(−1) K^(−1),这在层状无机材料中是极低的.这项研究为低导热层状材料的设计提供了新的视角.
