In this paper,the investigation of a novel compact 2×2,2×1,and 1×1 Ultra-Wide Band(UWB)based Multiple-Input Multiple-Output(MIMO)antenna with Defected Ground Structure(DGS)is employed.The proposed Elect...In this paper,the investigation of a novel compact 2×2,2×1,and 1×1 Ultra-Wide Band(UWB)based Multiple-Input Multiple-Output(MIMO)antenna with Defected Ground Structure(DGS)is employed.The proposed Electromagnetic Radiation Structures(ERS)is composed of multiple radiating elements.These MIMO antennas are designed and analyzed with and without DGS.The feeding is introduced by a microstrip-fed line to significantly moderate the radiating structure’s overall size,which is 60×40×1 mm.The high directivity and divergence characteristics are attained by introducing the microstripfed lines perpendicular to each other.And the projected MIMO antenna structures are compared with others by using parameters like Return Loss(RL),Voltage Standing Wave Ratio(VSWR),Radiation Pattern(RP),radiation efficiency,and directivity.The same MIMO set-up is redesigned with DGS,and the resultant parameters are compared.Finally,the Multiple Input and Multiple Output Radiating Structures with and without DGS are compared for result considerations like RL,VSWR,RP,radiation efficiency,and directivity.This projected antenna displays an omnidirectional RP with moderate gain,which is highly recommended for human healthcare applications.By introducing the defected ground structure in bottom layer the lower cut-off frequencies of 2.3,4.5 and 6.0 GHz are achieved with few biological effects on radio propagation in human body communications.The proposed design covers numerous well-known wireless standards,along with dual-function DGS slots,and it can be easily integrated into Wireless Body Area Networks(WBAN)in medical applications.This WBAN links the autonomous nodes that may be situated either in the clothes,on-body or beneath the skin of a person.This system typically advances the complete human body and the inter-connected nodes through a wireless communication channel.展开更多
Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distor...Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired.In this paper,a compact Ultra-Wideband(UWB)V-shaped monopole antenna is presented.UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape.The proposed V-shaped is designed by incorporating a rectangle,and an inverted isosceles triangle using FR4 substrate.The size of the antenna is 25 mm×26 mm×1.6 mm.The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial,Scientific,and Medical(ISM),Worldwide Interoperability for Microwave Access(WiMAX),(IEEE 802.11/HIPERLAN band,5G sub 6 GHz)which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission(FCC)with a maximum gain of 3.83 dB.The antenna is designed in Ansys HFSS.Results for key performance parameters of the antenna are presented.The measured results are in good agreement with the simulated results.Due to flat gain,uniform group delay,omni directional radiation pattern characteristics and well-matched impedance,the proposed antenna is suitable for WiMAX,ISM and heterogeneous wireless systems.展开更多
In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna...In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna causes even or odd mode resonances similar to the unit cell structure depending on the orientation of the microstrip feed used to excite the unit cell.However,the orientation which gives low-frequency resonance is considered here.The unit cell antenna is then loaded with a meander line which is parallel to the split bearing side and connects the other two sides orthogonal to the split bearing side.This modified structure excites another mode of resonance at high frequency when a meander line defect is loaded on the metallic ground plane.Specific parameters of the meander line structure,the DGS shape,and the unit cell are optimized to place these two resonances at different frequencies with proper frequency intervals to enhance the bandwidth.Finally,the feed is placed in an offset position for better impedance matching without affecting the bandwidth The compact dimension of the antenna is 0.25λL×0.23λL×0.02λL,whereλL is the free space wavelength with respect to the center frequency of the impedance bandwidth.The proposed antenna is fabricated and measured.Experimental results reveal that the modified design gives monopole like radiation patterns which achieves a fractional operating bandwidth of 26.6%,from 3.26 to 4.26 GHz for|S11|<−10 dB and a pick gain of 1.26 dBi is realized.In addition,the simulated and measured crosspolarization levels are both less than−15 dB in the horizontal plane.展开更多
Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagn...Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagnetic band-gap structures by adjusting the capacitance and changing the inductance through varying the width and length of spiral defected ground structure. Then by applying the three different spirals shapes (one, two and four arms) as the ground plane of microstrip patch antenna with different feeding techniques to create multi or ultra wide-band, improve the antenna gain and reduce the antenna size, it is found that the four arms spiral defected ground structure of microstrip patch antenna with offset feed gives good performance, electrical size reduction to about 75% as compared to the original patch size and ultra-wide bandwidth extends from 2 GHz up to 12 GHz with ?8 dB impedance bandwidth.展开更多
We study the plasmonic properties of hybrid nanostructures consisting of double vacancy defected graphene(DVDGr)and metallic nanoarrays using the time-dependent density functional theory. It is found that DVDGr with p...We study the plasmonic properties of hybrid nanostructures consisting of double vacancy defected graphene(DVDGr)and metallic nanoarrays using the time-dependent density functional theory. It is found that DVDGr with pure and mixed noble/transition-metal nanoarrays can produce a stronger light absorption due to the coherent resonance of plasmons than graphene nanostructures. Comparing with the mixed Au/Pd nanoarrays, pure Au nanoarrays have stronger plasmonic enhancement. Furthermore, harmonics from the hybrid nanostructures exposed to the combination of lasers ranged from ultraviolet to infrared and a controlling pulse are investigated theoretically. The harmonic plateau can be broadened significantly and the energy of harmonic spectra is dramatically extended by the controlling pulse. Thus, it is possible to tune the width and intensity of harmonic spectrum to achieve broadband absorption of radiation. The methodology described here not only improves the understanding of the surface plasmon effect used in a DVDGr-metal optoelectronic device but also may be applicable to different optical technologies.展开更多
A novel defected ground structure (DGS) for the microstrip line is proposed in this paper. The DGS lattice has more defect parameters so that it can provide better performance than the conventional dumbbell-shaped D...A novel defected ground structure (DGS) for the microstrip line is proposed in this paper. The DGS lattice has more defect parameters so that it can provide better performance than the conventional dumbbell-shaped DGS. Selectivity is improved by 97.2% with a sharpness factor of 24.6%. The method is applied to the design of a low-pass filter to confirm validity of the proposed DGS.展开更多
The paper presents an improved equivalent circuit parameters extraction method for the dumbbell-shaped defected ground structure (DGS). The new extraction parameters equations are obtained in closed-form expressions, ...The paper presents an improved equivalent circuit parameters extraction method for the dumbbell-shaped defected ground structure (DGS). The new extraction parameters equations are obtained in closed-form expressions, which contain S11 and S21. The DGS unit with center frequency of 5 GHz is designed and fabricated on a TLX substrate with thickness of 1 mm and dielectric constant of 2.55. The circuit simulated results are in good agreement with the measured results. This parameters extraction method can be widely used for the design and analysis of DGS .展开更多
BAEKGROUND: Some experimental studies demonstrate that subcutaneous implant of allograft can significantly decrease lymphocyte infiltration and reduce immunological reaction. However, compared with autologous nerve g...BAEKGROUND: Some experimental studies demonstrate that subcutaneous implant of allograft can significantly decrease lymphocyte infiltration and reduce immunological reaction. However, compared with autologous nerve grafting, what is the effect of nerve regeneration after repair?OB]EETIVE: To observe the local nervous status of the detected part of sciatic nerve repaired through subcutaneously implanting peripheral nerve allograft, and compare the effect with fresh autologous nerve grafting.DESTGN : Contrast observation.SETTING : Departments of Orthopaedics of Zhengzhou Fifth People's Hospital and First Hospital Affiliated to Chongqing Medical University.MATEREALS : Totally 30 healthy adult Wistar male rats, with body mass of (200±20)g, were enrolled. Optical microscope (Olympus biological microscope BHS, Japan), Electron microscope (H-600, Japan),CM-2000 biomedical image analysis system (CM-2000,Beihang) and myoelectricity scanner (KEYPOINT, Denmark) were used in this experiment.METHODS : This experiment was carried out in the Orthopaedic Laboratory of Chongqing Medical University between October 2000 and April 2002. ① Six rats were chosen as the donors for allogenic nerve grafting, and 15 mm sciatic nerve segment was chosen as graft. The other rats were randomly divided into two groups: allogenic nerve grafting group and autologous nerve grafting group, with 12 rats in each group. In the allogenic nerve grafting group, a skin incision was made on the posterior side of right thigh, and subcutaneous blunt dissection was performed prorsally a little, then allograft was implanted. Two weeks later, sciatic nerve was exposed at the posterior side of left thigh and cut respectively at 5 mm and another 10 mm away from pelvis. The donor nerve (with connective tissue veil) implanted subcutaneously on the right thigh was taken out. Sectioned connective tissue at the proximal end was trimmed and that at the distal end as done but reserved 10 mm in length, and inosculated antegradely at the nerve defect on the left side with 11/0 nylon line. Twelve rats in autologous nerve grafting group underwent a 10 mm sciatic nerve defect inci- sion on the right thigh and implant of fresh sciatic nerve from left thigh. The incision on the left thigh was repaired in situ. ②2,4,8 and 14 weeks after grafting, the nerve specimen of anastomosis segment was observed under optical microscope. Fourteen weeks after grafting, the ultrathin section of distal sciatic nerve was observed under transmission electron microscope. The number and size of regenerated axons at the cross section of anastomosis of proximal and distal sciatic nerve were analyzed with biomedical image analysis system. Neuroelectrophysiological change of in vivo sciatic nerve was detected with myoelectricity scanner.③ t test was used in the comparison of difference of measurement data.MAZN OUTCOME MEASURES : ① Observation of anastomosis part of sciatic nerve under optical and electron microscopes in the two groups. ② Comparison of motor nerve conduction velocity, latent period and action potential peak as well as the number and size of cross-section of anastomosis part of proximal and distal sciatic nerve between two groups.RESULTS: ①Observation under optical microscope:Two weeks after grafting, neve axon of repaired region broke and medullary sheath denatured in the allogenic nerve grafting group and autologous nerve grafting group. At the same time, vascular engorgement and a little lymphocytes infiltration were found in the autologous nerve grafting group, but those were found worsened in the allogenic nerve grafting group. Four weeks after grafting, the intensity of the inflammatory reaction was similar between two groups, some collagen fibers at the proximal end proliferated; 8 weeks after grafting, the inflammatory reaction ended basically and the collagen fibers proliferated obviously in the two groups. ② Observation under electron microscope: Fourteen weeks after grafting, the structure of epineurium was in integrity and there were no obvious differences in perineurium and endonurium between two groups. A large number of myelinated nerve fibers and a few unmyelinated nerve fibers regenerated. The structure of myelin sheath was in integrity. ③The number and size of regenerated axons of anastomosis of proximal and distal sciatic nerve had no significant difference 14 weeks after grafting [(575.500±7.495) vs(585.700±11.172) axons/visual field ; (389.300±49.073) vs (407.600±0.283) axons/visual field;(6 423.830±119.911 ) vs (6 695.36± 84.287) μm^2/visual field = ( 5 980.110±74.572) vs(5 980.110±74.572) μm^2/visual field] (P 〉 0.05). ④ Neuroelectrophysiological examination showed that there were no significant differences in motor nerve evoked potential latent pedod[(1.420±0.346)vs (1.237±0.250) ms] , motor nerve conduction velocity [( 12.120±0.906 ) vs(13.020±0.599) m/s]and latent period of sciatic nerve [(0.500±0.380)vs (1.250±1.067) mV] of rats between two groups (P 〉 0.05).CONCLUSTON: Although subcutaneous implant of peripheral nerve allograft has some inflammatory reactions, no obvious rejection is found. Repair results of two groups show that subcutaneous implant of allograft can promote nerve regeneration, which is similar to autologous nerve grafting.展开更多
Defect and charge transfer efficiency of nano-photocatalysts are important factors which influence their photocatalytic performance.In this work,oxygen vacancies are successfully introduced in the synthesis process of...Defect and charge transfer efficiency of nano-photocatalysts are important factors which influence their photocatalytic performance.In this work,oxygen vacancies are successfully introduced in the synthesis process of Bi_(2)Al_(4)O_(9)/β-Bi_(2)O_(3)heterojunctions through one-step in situ selfcombustion method.High-resolution transmission electron microscopy (HRTEM),UV-Vis diffuse reflectance spectra (UV-Vis DRS),and electron spin resonance (ESR) measurements confirm the existence of oxygen vacancies.In addition,by controlling the ratio of reactants of Bi(NO_(3))_(3)to Al(NO_(3))_(3),the ratio of Bi_(2)Al_(4)O_(9)and β-Bi_(2)O_(3)in the heterojunction can be easily adjusted.Photocurrent responses and surface photovoltage spectroscopy (SPV) indicate that the construction of the Bi_(2)Al_(4)O_(9)/β-Bi_(2)O_(3)heterostructure improves the separation efficiency of the photo-generated electrons and holes.CO_(2)-TPD results imply that the amounts and stability of heterojunctions are enhanced compared with their counterparts.The Bi_(2)Al_(4)O_(9)/β-Bi_(2)O_(3)heterojunction with 14 mol%Bi_(2)Al_(4)O_(9)shows the highest photocatalytic ability for reduction of CO_(2)into CO.The enhanced photoreduction of CO_(2)performance can be ascribed to the synergistic effects of the heterojunction for electron separation and oxygen vacancies for CO_(2)activation.展开更多
Electrocatalytic water splitting is limited by kinetics-sluggish oxygen evolution,in which the activity of catalysts depends on their electronic structure.However,the infl uence of electron spin polarization on cataly...Electrocatalytic water splitting is limited by kinetics-sluggish oxygen evolution,in which the activity of catalysts depends on their electronic structure.However,the infl uence of electron spin polarization on catalytic activity is ambiguous.Herein,we successfully regulate the spin polarization of Co_(3)O_(4)catalysts by tuning the concentration of cobalt defects from 0.8 to 14.5%.X-ray absorption spectroscopy spectra and density functional theory calculations confi rm that the spin polarization of Co_(3)O_(4)is positively correlated with the concentration of cobalt defects.Importantly,the enhanced spin polarization can increase hydroxyl group absorption to signifi cantly decrease the Gibbs free energy change value of the OER rate-determining step and regulate the spin polarization of oxygen species through a spin electron-exchange process to easily produce triplet-state O_(2),which can obviously increase electrocatalytic OER activity.In specifi c,Co_(3)O_(4)-50 with 14.5%cobalt defects exhibits the highest spin polarization and shows the best normalized OER activity.This work provides an important strategy to increase the water splitting activity of electrocatalysts via the rational regulation of electron spin polarization.展开更多
Over the past decade, graphitic carbon nitride(g-C_(3)N_(4)) has emerged as a universal photocatalyst toward various sustainable carbo-neutral technologies. Despite solar applications discrepancy, g-C_(3)N_(4) is stil...Over the past decade, graphitic carbon nitride(g-C_(3)N_(4)) has emerged as a universal photocatalyst toward various sustainable carbo-neutral technologies. Despite solar applications discrepancy, g-C_(3)N_(4) is still confronted with a general fatal issue of insufficient supply of thermodynamically active photocarriers due to its inferior solar harvesting ability and sluggish charge transfer dynamics. Fortunately, this could be significantly alleviated by the “all-in-one” defect engineering strategy, which enables a simultaneous amelioration of both textural uniqueness and intrinsic electronic band structures. To this end, we have summarized an unprecedently comprehensive discussion on defect controls including the vacancy/non-metallic dopant creation with optimized electronic band structure and electronic density, metallic doping with ultraactive coordinated environment(M–N_(x), M–C_(2)N_(2), M–O bonding), functional group grafting with optimized band structure, and promoted crystallinity with extended conjugation π system with weakened interlayered van der Waals interaction. Among them, the defect states induced by various defect types such as N vacancy, P/S/halogen dopants, and cyano group in boosting solar harvesting and accelerating photocarrier transfer have also been emphasized. More importantly, the shallow defect traps identified by femtosecond transient absorption spectra(fs-TAS) have also been highlighted. It is believed that this review would pave the way for future readers with a unique insight into a more precise defective g-C_(3)N_(4) “customization”, motivating more profound thinking and flourishing research outputs on g-C_(3)N_(4)-based photocatalysis.展开更多
Neural tube defects(NTDs)are severe congenital neurodevelopmental disorders arising from incomplete neural tube closure.Although folate supplementation has been shown to mitigate the incidence of NTDs,some cases,often...Neural tube defects(NTDs)are severe congenital neurodevelopmental disorders arising from incomplete neural tube closure.Although folate supplementation has been shown to mitigate the incidence of NTDs,some cases,often attributable to genetic factors,remain unpreventable.The SHROOM3 gene has been implicated in NTD cases that are unresponsive to folate supplementation;at present,however,the underlying mechanism remains unclear.Neural tube morphogenesis is a complex process involving the folding of the planar epithelium of the neural plate.To determine the role of SHROOM3 in early developmental morphogenesis,we established a neuroepithelial organoid culture system derived from cynomolgus monkeys to closely mimic the in vivo neural plate phase.Loss of SHROOM3 resulted in shorter neuroepithelial cells and smaller nuclei.These morphological changes were attributed to the insufficient recruitment of cytoskeletal proteins,namely fibrous actin(F-actin),myosin II,and phospho-myosin light chain(PMLC),to the apical side of the neuroepithelial cells.Notably,these defects were not rescued by folate supplementation.RNA sequencing revealed that differentially expressed genes were enriched in biological processes associated with cellular and organ morphogenesis.In summary,we established an authentic in vitro system to study NTDs and identified a novel mechanism for NTDs that are unresponsive to folate supplementation.展开更多
BACKGROUND Cartilage defects are some of the most common causes of arthritis.Cartilage lesions caused by inflammation,trauma or degenerative disease normally result in osteochondral defects.Previous studies have shown...BACKGROUND Cartilage defects are some of the most common causes of arthritis.Cartilage lesions caused by inflammation,trauma or degenerative disease normally result in osteochondral defects.Previous studies have shown that decellularized extracellular matrix(ECM)derived from autologous,allogenic,or xenogeneic mesenchymal stromal cells(MSCs)can effectively restore osteochondral integrity.AIM To determine whether the decellularized ECM of antler reserve mesenchymal cells(RMCs),a xenogeneic material from antler stem cells,is superior to the currently available treatments for osteochondral defects.METHODS We isolated the RMCs from a 60-d-old sika deer antler and cultured them in vitro to 70%confluence;50 mg/mL L-ascorbic acid was then added to the medium to stimulate ECM deposition.Decellularized sheets of adipocyte-derived MSCs(aMSCs)and antlerogenic periosteal cells(another type of antler stem cells)were used as the controls.Three weeks after ascorbic acid stimulation,the ECM sheets were harvested and applied to the osteochondral defects in rat knee joints.RESULTS The defects were successfully repaired by applying the ECM-sheets.The highest quality of repair was achieved in the RMC-ECM group both in vitro(including cell attachment and proliferation),and in vivo(including the simultaneous regeneration of well-vascularized subchondral bone and avascular articular hyaline cartilage integrated with surrounding native tissues).Notably,the antler-stem-cell-derived ECM(xenogeneic)performed better than the aMSC-ECM(allogenic),while the ECM of the active antler stem cells was superior to that of the quiescent antler stem cells.CONCLUSION Decellularized xenogeneic ECM derived from the antler stem cell,particularly the active form(RMC-ECM),can achieve high quality repair/reconstruction of osteochondral defects,suggesting that selection of decellularized ECM for such repair should be focused more on bioactivity rather than kinship.展开更多
Numerical simulations of longitudinal wave propagation in a rock bar with microcracks are conducted by using the numerical manifold method which has great advantages in the simulation of discontinuities.Firstly,valida...Numerical simulations of longitudinal wave propagation in a rock bar with microcracks are conducted by using the numerical manifold method which has great advantages in the simulation of discontinuities.Firstly,validation of the numerical manifold method is carried out by simulations of a longitudinal stress wave propagating through intact and cracked rock bars.The behavior of the stress wave traveling in a one-dimensional rock bar with randomly distributed microcracks is subsequently studied.It is revealed that the highly defected rock bar has significant viscoelasticity to the stress wave propagation.Wave attenuation as well as time delay is affected by the length,quantity,specific stiffness of the distributed microcracks as well as the incident stress wave frequency.The storage and loss moduli of the defected rock are also affected by the microcrack properties;however,they are independent of incident stress wave frequency.展开更多
A compact common-mode filter is proposed to suppress common-mode noise for application of high-speed differential signal traces. The filter adopts one big C-shaped defected ground structure (DGS) cell in the left of...A compact common-mode filter is proposed to suppress common-mode noise for application of high-speed differential signal traces. The filter adopts one big C-shaped defected ground structure (DGS) cell in the left of ground plane and two small C-shaped DGS cells with opposite direction in the right of ground plane. Because these DGS cells have different dimensions, the filter has three adjacent equivalent resonant points, which can suppress wideband common-mode noise effectively. The left C-shaped DGS and its adjacent C-shaped DGS cell form an approximate closed structure, which can efficiently reduce the influence of the mutual capacitance. The filter provides a common-mode suppression from 3.6 GHz to 14.4 GHz over 15 dB while it has a small size of 10 minx 10 mm. The fractional bandwidth of the filter is 120%, and the differential signals still keep good signal integrity. The experimental results are in good agreement with the simulated results.展开更多
Electronic properties of multi-defected zigzag single-walled carbon nanotubes are investigated by use of the tight-binding Green's function method. The Stone-Wales defects and the vacancies are considered. We find...Electronic properties of multi-defected zigzag single-walled carbon nanotubes are investigated by use of the tight-binding Green's function method. The Stone-Wales defects and the vacancies are considered. We find that the conductance sensitively depends on the realistic defect configurations for the metallic zigzag carbon nanotubes. Interestingly, the electronic transport properties of the nanotubes with three vacancies can be considered as the sum effect of two double-vacancies, while those with Stone-Wales defects can not. The electron interference along the longitudinal axis and the transport blocking are observed, which may be useful for understanding the electron transport behavior of carbon nanotube in experiments.展开更多
Sintered silver nanoparticles(AgNPs)arewidely used in high-power electronics due to their exceptional properties.However,the material reliability is significantly affected by various microscopic defects.In this work,t...Sintered silver nanoparticles(AgNPs)arewidely used in high-power electronics due to their exceptional properties.However,the material reliability is significantly affected by various microscopic defects.In this work,the three primary micro-defect types at potential stress concentrations in sintered AgNPs are identified,categorized,and quantified.Molecular dynamics(MD)simulations are employed to observe the failure evolution of different microscopic defects.The dominant mechanisms responsible for this evolution are dislocation nucleation and dislocation motion.At the same time,this paper clarifies the quantitative relationship between the tensile strain amount and the failure mechanism transitions of the three defect types by defining key strain points.The impact of defect types on the failure process is also discussed.Furthermore,traction-separation curves extracted from microscopic defect evolutions serve as a bridge to connect the macro-scale model.The validity of the crack propagation model is confirmed through tensile tests.Finally,we thoroughly analyze how micro-defect types influence macro-crack propagation and attempt to find supporting evidence from the MD model.Our findings provide a multi-perspective reference for the reliability analysis of sintered AgNPs.展开更多
Magnesium and magnesium alloy foils have great potential for application in battery anodes,electromagnetic shielding,optics and acoustics,and biology because of their excellent specific damping,internal dissipation co...Magnesium and magnesium alloy foils have great potential for application in battery anodes,electromagnetic shielding,optics and acoustics,and biology because of their excellent specific damping,internal dissipation coefficients,magnetic and electrical conductivities,as well as high theoretical specific capacity.However,magnesium alloys exhibit poor deformation ability due to their hexagonal close-packed crystal structure.Preparing magnesium and magnesium alloy foils with thicknesses of less than 0.1 mm is difficult because of surface oxidation and grain growth at high temperatures or severe anisotropy after cold rolling that leads to cracks.Numerous methods have been applied to prepare magnesium alloy foils.They include warm rolling,cold rolling,accumulative roll bonding,electric plastic rolling,and on-line heating rolling.Defects of magnesium and magnesium alloy foils during preparation,such as edge cracks and breakage,are important factors for consideration.Herein,the current status of the research on magnesium and magnesium alloy foils is summarized from the aspects of foil preparation,defect control,performance characterization,and application prospects.The advantages and disadvantages of different preparation methods and defect(edge cracks and breakage)mechanisms in the preparation of foils are identified.展开更多
The rapid advancement of halide-based hybrid perovskite materials has garnered significant research attention,particularly in the domain of photovoltaic technology.Owing to their exceptional optoelec-tronic properties...The rapid advancement of halide-based hybrid perovskite materials has garnered significant research attention,particularly in the domain of photovoltaic technology.Owing to their exceptional optoelec-tronic properties,they demonstrated power conversion efficiency(PcE)of over 25%in single junction solar cells.Despite the notable progress in PCE over the past decade,the inherent high defect density pre-senting in perovskite materials gives rise to several loss mechanisms and associated ion migration in per-ovskite solar cells(PsCs)during operational conditions.These factors collectively contribute to a significant stability challenge in PsCs,placing their longevity far behind for commercialization.While numerous reports have explored defects,ion migration,and their impacts on device performance,a com-prehensive correlation between the types of defects and the degradation kinetics of perovskite materials and PsCs has been lacking.In this context,this review aims to provide a comprehensive overview of the origins of defects and ion migration,emphasizing their correlation with the degradation kinetics of per-ovskite materials and PsCs,leveraging reliable characterization techniques.Furthermore,these charac-terization techniques are intended to comprehend loss mechanisms by different passivation approaches to enhance the durability and PCE of PSCs.展开更多
Here,a novel strategy is proposed targeting the volatility of A-site cations and the disordered arrangement of perovskite grains through employing Cs~+contained metal-organic frameworks In-aip(Cs)obtained by ion-excha...Here,a novel strategy is proposed targeting the volatility of A-site cations and the disordered arrangement of perovskite grains through employing Cs~+contained metal-organic frameworks In-aip(Cs)obtained by ion-exchange and crystalline transform.Interatomic forces between Cs-O atoms split the pore channels of the pristine In-aip,endowing In-aip(Cs)with multidimensional charge transport channels,In addition,the partially freed Cs~+in the interlayer compensates for the vacancy of A-site cations during the perovskite preparation process.The In-aip(Cs)modified perovskite films have a flat morphology,large grains and excellent optoelectronic properties.Benefiting from the high-quality perovskite films and faster charge extraction,the In-aip(Cs)-modified PSCs achieved a champion PCE of 23.03%,superior to the In-aip-modified(22.29%)and control device(21.13%),More importantly,the unencapsulated PSCs modified with In-aip(Cs)exhibited outstanding humidity and thermal stability.Over a period of almost 1000 h,the unencapsulated In-aip(Cs)-modified device retained 85%of its initial PCE after storing in a glove box at 85℃,and retained 87%of the primary PCE upon storage in ambient condition at 25℃under a humidity of 40%.展开更多
文摘In this paper,the investigation of a novel compact 2×2,2×1,and 1×1 Ultra-Wide Band(UWB)based Multiple-Input Multiple-Output(MIMO)antenna with Defected Ground Structure(DGS)is employed.The proposed Electromagnetic Radiation Structures(ERS)is composed of multiple radiating elements.These MIMO antennas are designed and analyzed with and without DGS.The feeding is introduced by a microstrip-fed line to significantly moderate the radiating structure’s overall size,which is 60×40×1 mm.The high directivity and divergence characteristics are attained by introducing the microstripfed lines perpendicular to each other.And the projected MIMO antenna structures are compared with others by using parameters like Return Loss(RL),Voltage Standing Wave Ratio(VSWR),Radiation Pattern(RP),radiation efficiency,and directivity.The same MIMO set-up is redesigned with DGS,and the resultant parameters are compared.Finally,the Multiple Input and Multiple Output Radiating Structures with and without DGS are compared for result considerations like RL,VSWR,RP,radiation efficiency,and directivity.This projected antenna displays an omnidirectional RP with moderate gain,which is highly recommended for human healthcare applications.By introducing the defected ground structure in bottom layer the lower cut-off frequencies of 2.3,4.5 and 6.0 GHz are achieved with few biological effects on radio propagation in human body communications.The proposed design covers numerous well-known wireless standards,along with dual-function DGS slots,and it can be easily integrated into Wireless Body Area Networks(WBAN)in medical applications.This WBAN links the autonomous nodes that may be situated either in the clothes,on-body or beneath the skin of a person.This system typically advances the complete human body and the inter-connected nodes through a wireless communication channel.
基金This work was supported by the Research Program through the National Research Foundation of Korea,NRF-2019R1A2C1005920,S.K.
文摘Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired.In this paper,a compact Ultra-Wideband(UWB)V-shaped monopole antenna is presented.UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape.The proposed V-shaped is designed by incorporating a rectangle,and an inverted isosceles triangle using FR4 substrate.The size of the antenna is 25 mm×26 mm×1.6 mm.The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial,Scientific,and Medical(ISM),Worldwide Interoperability for Microwave Access(WiMAX),(IEEE 802.11/HIPERLAN band,5G sub 6 GHz)which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission(FCC)with a maximum gain of 3.83 dB.The antenna is designed in Ansys HFSS.Results for key performance parameters of the antenna are presented.The measured results are in good agreement with the simulated results.Due to flat gain,uniform group delay,omni directional radiation pattern characteristics and well-matched impedance,the proposed antenna is suitable for WiMAX,ISM and heterogeneous wireless systems.
文摘In this paper,a unit cell of a single-negative metamaterial structure loaded with a meander line and defected ground structure(DGS)is investigated as the principle radiating element of an antenna.The unit cell antenna causes even or odd mode resonances similar to the unit cell structure depending on the orientation of the microstrip feed used to excite the unit cell.However,the orientation which gives low-frequency resonance is considered here.The unit cell antenna is then loaded with a meander line which is parallel to the split bearing side and connects the other two sides orthogonal to the split bearing side.This modified structure excites another mode of resonance at high frequency when a meander line defect is loaded on the metallic ground plane.Specific parameters of the meander line structure,the DGS shape,and the unit cell are optimized to place these two resonances at different frequencies with proper frequency intervals to enhance the bandwidth.Finally,the feed is placed in an offset position for better impedance matching without affecting the bandwidth The compact dimension of the antenna is 0.25λL×0.23λL×0.02λL,whereλL is the free space wavelength with respect to the center frequency of the impedance bandwidth.The proposed antenna is fabricated and measured.Experimental results reveal that the modified design gives monopole like radiation patterns which achieves a fractional operating bandwidth of 26.6%,from 3.26 to 4.26 GHz for|S11|<−10 dB and a pick gain of 1.26 dBi is realized.In addition,the simulated and measured crosspolarization levels are both less than−15 dB in the horizontal plane.
文摘Different feeding techniques of microstrip patch antennas with different spiral defected ground structures are presented in this paper. The investigated structures illustrate some merits in designing multi-electromagnetic band-gap structures by adjusting the capacitance and changing the inductance through varying the width and length of spiral defected ground structure. Then by applying the three different spirals shapes (one, two and four arms) as the ground plane of microstrip patch antenna with different feeding techniques to create multi or ultra wide-band, improve the antenna gain and reduce the antenna size, it is found that the four arms spiral defected ground structure of microstrip patch antenna with offset feed gives good performance, electrical size reduction to about 75% as compared to the original patch size and ultra-wide bandwidth extends from 2 GHz up to 12 GHz with ?8 dB impedance bandwidth.
基金Project supported by the National Key R&D Program of China(Grant No.2017YFA0303600)the National Natural Science Foundation of China(Grant Nos.11974253 and 11774248)。
文摘We study the plasmonic properties of hybrid nanostructures consisting of double vacancy defected graphene(DVDGr)and metallic nanoarrays using the time-dependent density functional theory. It is found that DVDGr with pure and mixed noble/transition-metal nanoarrays can produce a stronger light absorption due to the coherent resonance of plasmons than graphene nanostructures. Comparing with the mixed Au/Pd nanoarrays, pure Au nanoarrays have stronger plasmonic enhancement. Furthermore, harmonics from the hybrid nanostructures exposed to the combination of lasers ranged from ultraviolet to infrared and a controlling pulse are investigated theoretically. The harmonic plateau can be broadened significantly and the energy of harmonic spectra is dramatically extended by the controlling pulse. Thus, it is possible to tune the width and intensity of harmonic spectrum to achieve broadband absorption of radiation. The methodology described here not only improves the understanding of the surface plasmon effect used in a DVDGr-metal optoelectronic device but also may be applicable to different optical technologies.
基金Project supported by the Shanghai Leading Academic Discipline Project (Grant No.T0102)
文摘A novel defected ground structure (DGS) for the microstrip line is proposed in this paper. The DGS lattice has more defect parameters so that it can provide better performance than the conventional dumbbell-shaped DGS. Selectivity is improved by 97.2% with a sharpness factor of 24.6%. The method is applied to the design of a low-pass filter to confirm validity of the proposed DGS.
文摘The paper presents an improved equivalent circuit parameters extraction method for the dumbbell-shaped defected ground structure (DGS). The new extraction parameters equations are obtained in closed-form expressions, which contain S11 and S21. The DGS unit with center frequency of 5 GHz is designed and fabricated on a TLX substrate with thickness of 1 mm and dielectric constant of 2.55. The circuit simulated results are in good agreement with the measured results. This parameters extraction method can be widely used for the design and analysis of DGS .
文摘BAEKGROUND: Some experimental studies demonstrate that subcutaneous implant of allograft can significantly decrease lymphocyte infiltration and reduce immunological reaction. However, compared with autologous nerve grafting, what is the effect of nerve regeneration after repair?OB]EETIVE: To observe the local nervous status of the detected part of sciatic nerve repaired through subcutaneously implanting peripheral nerve allograft, and compare the effect with fresh autologous nerve grafting.DESTGN : Contrast observation.SETTING : Departments of Orthopaedics of Zhengzhou Fifth People's Hospital and First Hospital Affiliated to Chongqing Medical University.MATEREALS : Totally 30 healthy adult Wistar male rats, with body mass of (200±20)g, were enrolled. Optical microscope (Olympus biological microscope BHS, Japan), Electron microscope (H-600, Japan),CM-2000 biomedical image analysis system (CM-2000,Beihang) and myoelectricity scanner (KEYPOINT, Denmark) were used in this experiment.METHODS : This experiment was carried out in the Orthopaedic Laboratory of Chongqing Medical University between October 2000 and April 2002. ① Six rats were chosen as the donors for allogenic nerve grafting, and 15 mm sciatic nerve segment was chosen as graft. The other rats were randomly divided into two groups: allogenic nerve grafting group and autologous nerve grafting group, with 12 rats in each group. In the allogenic nerve grafting group, a skin incision was made on the posterior side of right thigh, and subcutaneous blunt dissection was performed prorsally a little, then allograft was implanted. Two weeks later, sciatic nerve was exposed at the posterior side of left thigh and cut respectively at 5 mm and another 10 mm away from pelvis. The donor nerve (with connective tissue veil) implanted subcutaneously on the right thigh was taken out. Sectioned connective tissue at the proximal end was trimmed and that at the distal end as done but reserved 10 mm in length, and inosculated antegradely at the nerve defect on the left side with 11/0 nylon line. Twelve rats in autologous nerve grafting group underwent a 10 mm sciatic nerve defect inci- sion on the right thigh and implant of fresh sciatic nerve from left thigh. The incision on the left thigh was repaired in situ. ②2,4,8 and 14 weeks after grafting, the nerve specimen of anastomosis segment was observed under optical microscope. Fourteen weeks after grafting, the ultrathin section of distal sciatic nerve was observed under transmission electron microscope. The number and size of regenerated axons at the cross section of anastomosis of proximal and distal sciatic nerve were analyzed with biomedical image analysis system. Neuroelectrophysiological change of in vivo sciatic nerve was detected with myoelectricity scanner.③ t test was used in the comparison of difference of measurement data.MAZN OUTCOME MEASURES : ① Observation of anastomosis part of sciatic nerve under optical and electron microscopes in the two groups. ② Comparison of motor nerve conduction velocity, latent period and action potential peak as well as the number and size of cross-section of anastomosis part of proximal and distal sciatic nerve between two groups.RESULTS: ①Observation under optical microscope:Two weeks after grafting, neve axon of repaired region broke and medullary sheath denatured in the allogenic nerve grafting group and autologous nerve grafting group. At the same time, vascular engorgement and a little lymphocytes infiltration were found in the autologous nerve grafting group, but those were found worsened in the allogenic nerve grafting group. Four weeks after grafting, the intensity of the inflammatory reaction was similar between two groups, some collagen fibers at the proximal end proliferated; 8 weeks after grafting, the inflammatory reaction ended basically and the collagen fibers proliferated obviously in the two groups. ② Observation under electron microscope: Fourteen weeks after grafting, the structure of epineurium was in integrity and there were no obvious differences in perineurium and endonurium between two groups. A large number of myelinated nerve fibers and a few unmyelinated nerve fibers regenerated. The structure of myelin sheath was in integrity. ③The number and size of regenerated axons of anastomosis of proximal and distal sciatic nerve had no significant difference 14 weeks after grafting [(575.500±7.495) vs(585.700±11.172) axons/visual field ; (389.300±49.073) vs (407.600±0.283) axons/visual field;(6 423.830±119.911 ) vs (6 695.36± 84.287) μm^2/visual field = ( 5 980.110±74.572) vs(5 980.110±74.572) μm^2/visual field] (P 〉 0.05). ④ Neuroelectrophysiological examination showed that there were no significant differences in motor nerve evoked potential latent pedod[(1.420±0.346)vs (1.237±0.250) ms] , motor nerve conduction velocity [( 12.120±0.906 ) vs(13.020±0.599) m/s]and latent period of sciatic nerve [(0.500±0.380)vs (1.250±1.067) mV] of rats between two groups (P 〉 0.05).CONCLUSTON: Although subcutaneous implant of peripheral nerve allograft has some inflammatory reactions, no obvious rejection is found. Repair results of two groups show that subcutaneous implant of allograft can promote nerve regeneration, which is similar to autologous nerve grafting.
基金financial support from the National Natural Science Foundation of China(21776059,21376061)the Natural Science Foundation for Distinguished Young Scholars of Hebei Province(B2015208010)the Research Foundation of Hebei Province Education Department(No.ZC2016007)。
文摘Defect and charge transfer efficiency of nano-photocatalysts are important factors which influence their photocatalytic performance.In this work,oxygen vacancies are successfully introduced in the synthesis process of Bi_(2)Al_(4)O_(9)/β-Bi_(2)O_(3)heterojunctions through one-step in situ selfcombustion method.High-resolution transmission electron microscopy (HRTEM),UV-Vis diffuse reflectance spectra (UV-Vis DRS),and electron spin resonance (ESR) measurements confirm the existence of oxygen vacancies.In addition,by controlling the ratio of reactants of Bi(NO_(3))_(3)to Al(NO_(3))_(3),the ratio of Bi_(2)Al_(4)O_(9)and β-Bi_(2)O_(3)in the heterojunction can be easily adjusted.Photocurrent responses and surface photovoltage spectroscopy (SPV) indicate that the construction of the Bi_(2)Al_(4)O_(9)/β-Bi_(2)O_(3)heterostructure improves the separation efficiency of the photo-generated electrons and holes.CO_(2)-TPD results imply that the amounts and stability of heterojunctions are enhanced compared with their counterparts.The Bi_(2)Al_(4)O_(9)/β-Bi_(2)O_(3)heterojunction with 14 mol%Bi_(2)Al_(4)O_(9)shows the highest photocatalytic ability for reduction of CO_(2)into CO.The enhanced photoreduction of CO_(2)performance can be ascribed to the synergistic effects of the heterojunction for electron separation and oxygen vacancies for CO_(2)activation.
基金The authors appreciate the fi nancial support from the National Natural Science Foundation of China(Nos.21978200 and 22161142002)the Haihe Laboratory of Sustainable Chemical Transformations(CYZC202103).
文摘Electrocatalytic water splitting is limited by kinetics-sluggish oxygen evolution,in which the activity of catalysts depends on their electronic structure.However,the infl uence of electron spin polarization on catalytic activity is ambiguous.Herein,we successfully regulate the spin polarization of Co_(3)O_(4)catalysts by tuning the concentration of cobalt defects from 0.8 to 14.5%.X-ray absorption spectroscopy spectra and density functional theory calculations confi rm that the spin polarization of Co_(3)O_(4)is positively correlated with the concentration of cobalt defects.Importantly,the enhanced spin polarization can increase hydroxyl group absorption to signifi cantly decrease the Gibbs free energy change value of the OER rate-determining step and regulate the spin polarization of oxygen species through a spin electron-exchange process to easily produce triplet-state O_(2),which can obviously increase electrocatalytic OER activity.In specifi c,Co_(3)O_(4)-50 with 14.5%cobalt defects exhibits the highest spin polarization and shows the best normalized OER activity.This work provides an important strategy to increase the water splitting activity of electrocatalysts via the rational regulation of electron spin polarization.
基金the support of the Australia Research Council (ARC) through the Discovery Project (DP230101040)the Natural Science Foundation of Shandong Province (ZR2022QB139, No. ZR2020KF025)+3 种基金the Starting Research Fund (Grant No. 20210122) from the Ludong Universitythe Natural Science Foundation of China (12274190) from the Ludong Universitythe support of the Shandong Youth Innovation Team Introduction and Education Programthe Special Fund for Taishan Scholars Project (No. tsqn202211186) in Shandong Province。
文摘Over the past decade, graphitic carbon nitride(g-C_(3)N_(4)) has emerged as a universal photocatalyst toward various sustainable carbo-neutral technologies. Despite solar applications discrepancy, g-C_(3)N_(4) is still confronted with a general fatal issue of insufficient supply of thermodynamically active photocarriers due to its inferior solar harvesting ability and sluggish charge transfer dynamics. Fortunately, this could be significantly alleviated by the “all-in-one” defect engineering strategy, which enables a simultaneous amelioration of both textural uniqueness and intrinsic electronic band structures. To this end, we have summarized an unprecedently comprehensive discussion on defect controls including the vacancy/non-metallic dopant creation with optimized electronic band structure and electronic density, metallic doping with ultraactive coordinated environment(M–N_(x), M–C_(2)N_(2), M–O bonding), functional group grafting with optimized band structure, and promoted crystallinity with extended conjugation π system with weakened interlayered van der Waals interaction. Among them, the defect states induced by various defect types such as N vacancy, P/S/halogen dopants, and cyano group in boosting solar harvesting and accelerating photocarrier transfer have also been emphasized. More importantly, the shallow defect traps identified by femtosecond transient absorption spectra(fs-TAS) have also been highlighted. It is believed that this review would pave the way for future readers with a unique insight into a more precise defective g-C_(3)N_(4) “customization”, motivating more profound thinking and flourishing research outputs on g-C_(3)N_(4)-based photocatalysis.
基金supported by the National Natural Science Foundation of China (81930121,82125008 to Y.C.C.)National Key Research and Development Program of China (2018YFA0107902 to Y.C.C.and 2018YFA0801403 to Z.B.W.)+1 种基金Major Basic Research Project of Science and Technology of Yunnan (202001BC070001 to Y.C.C.)Natural Science Foundation of Yunnan Province (202102AA100053 to Y.C.C.)。
文摘Neural tube defects(NTDs)are severe congenital neurodevelopmental disorders arising from incomplete neural tube closure.Although folate supplementation has been shown to mitigate the incidence of NTDs,some cases,often attributable to genetic factors,remain unpreventable.The SHROOM3 gene has been implicated in NTD cases that are unresponsive to folate supplementation;at present,however,the underlying mechanism remains unclear.Neural tube morphogenesis is a complex process involving the folding of the planar epithelium of the neural plate.To determine the role of SHROOM3 in early developmental morphogenesis,we established a neuroepithelial organoid culture system derived from cynomolgus monkeys to closely mimic the in vivo neural plate phase.Loss of SHROOM3 resulted in shorter neuroepithelial cells and smaller nuclei.These morphological changes were attributed to the insufficient recruitment of cytoskeletal proteins,namely fibrous actin(F-actin),myosin II,and phospho-myosin light chain(PMLC),to the apical side of the neuroepithelial cells.Notably,these defects were not rescued by folate supplementation.RNA sequencing revealed that differentially expressed genes were enriched in biological processes associated with cellular and organ morphogenesis.In summary,we established an authentic in vitro system to study NTDs and identified a novel mechanism for NTDs that are unresponsive to folate supplementation.
基金National Natural Science Foundation of China,No.U20A20403This study was conducted in accordance with the Animal Ethics Committee of the Institute of Antler Science and Product Technology,Changchun Sci-Tech University(AEC No:CKARI202309).
文摘BACKGROUND Cartilage defects are some of the most common causes of arthritis.Cartilage lesions caused by inflammation,trauma or degenerative disease normally result in osteochondral defects.Previous studies have shown that decellularized extracellular matrix(ECM)derived from autologous,allogenic,or xenogeneic mesenchymal stromal cells(MSCs)can effectively restore osteochondral integrity.AIM To determine whether the decellularized ECM of antler reserve mesenchymal cells(RMCs),a xenogeneic material from antler stem cells,is superior to the currently available treatments for osteochondral defects.METHODS We isolated the RMCs from a 60-d-old sika deer antler and cultured them in vitro to 70%confluence;50 mg/mL L-ascorbic acid was then added to the medium to stimulate ECM deposition.Decellularized sheets of adipocyte-derived MSCs(aMSCs)and antlerogenic periosteal cells(another type of antler stem cells)were used as the controls.Three weeks after ascorbic acid stimulation,the ECM sheets were harvested and applied to the osteochondral defects in rat knee joints.RESULTS The defects were successfully repaired by applying the ECM-sheets.The highest quality of repair was achieved in the RMC-ECM group both in vitro(including cell attachment and proliferation),and in vivo(including the simultaneous regeneration of well-vascularized subchondral bone and avascular articular hyaline cartilage integrated with surrounding native tissues).Notably,the antler-stem-cell-derived ECM(xenogeneic)performed better than the aMSC-ECM(allogenic),while the ECM of the active antler stem cells was superior to that of the quiescent antler stem cells.CONCLUSION Decellularized xenogeneic ECM derived from the antler stem cell,particularly the active form(RMC-ECM),can achieve high quality repair/reconstruction of osteochondral defects,suggesting that selection of decellularized ECM for such repair should be focused more on bioactivity rather than kinship.
文摘Numerical simulations of longitudinal wave propagation in a rock bar with microcracks are conducted by using the numerical manifold method which has great advantages in the simulation of discontinuities.Firstly,validation of the numerical manifold method is carried out by simulations of a longitudinal stress wave propagating through intact and cracked rock bars.The behavior of the stress wave traveling in a one-dimensional rock bar with randomly distributed microcracks is subsequently studied.It is revealed that the highly defected rock bar has significant viscoelasticity to the stress wave propagation.Wave attenuation as well as time delay is affected by the length,quantity,specific stiffness of the distributed microcracks as well as the incident stress wave frequency.The storage and loss moduli of the defected rock are also affected by the microcrack properties;however,they are independent of incident stress wave frequency.
基金supported by the National Science and Technology Major Project (2012ZX03002-001-02)the Fundamental Research Funds for the Central Universities of China (JB151109)
文摘A compact common-mode filter is proposed to suppress common-mode noise for application of high-speed differential signal traces. The filter adopts one big C-shaped defected ground structure (DGS) cell in the left of ground plane and two small C-shaped DGS cells with opposite direction in the right of ground plane. Because these DGS cells have different dimensions, the filter has three adjacent equivalent resonant points, which can suppress wideband common-mode noise effectively. The left C-shaped DGS and its adjacent C-shaped DGS cell form an approximate closed structure, which can efficiently reduce the influence of the mutual capacitance. The filter provides a common-mode suppression from 3.6 GHz to 14.4 GHz over 15 dB while it has a small size of 10 minx 10 mm. The fractional bandwidth of the filter is 120%, and the differential signals still keep good signal integrity. The experimental results are in good agreement with the simulated results.
基金supported by the Ministry of Science and Technology of Chinathe Ministry of Education of Chinathe National Natural Science Foundation of China
文摘Electronic properties of multi-defected zigzag single-walled carbon nanotubes are investigated by use of the tight-binding Green's function method. The Stone-Wales defects and the vacancies are considered. We find that the conductance sensitively depends on the realistic defect configurations for the metallic zigzag carbon nanotubes. Interestingly, the electronic transport properties of the nanotubes with three vacancies can be considered as the sum effect of two double-vacancies, while those with Stone-Wales defects can not. The electron interference along the longitudinal axis and the transport blocking are observed, which may be useful for understanding the electron transport behavior of carbon nanotube in experiments.
基金supported by the China Scholarship Council (CSC) (No.202206020149)the Academic Excellence Foundation of BUAA for PhD Students,the Funding Project of Science and Technology on Reliability and Environmental Engineering Laboratory (No.6142004210106).
文摘Sintered silver nanoparticles(AgNPs)arewidely used in high-power electronics due to their exceptional properties.However,the material reliability is significantly affected by various microscopic defects.In this work,the three primary micro-defect types at potential stress concentrations in sintered AgNPs are identified,categorized,and quantified.Molecular dynamics(MD)simulations are employed to observe the failure evolution of different microscopic defects.The dominant mechanisms responsible for this evolution are dislocation nucleation and dislocation motion.At the same time,this paper clarifies the quantitative relationship between the tensile strain amount and the failure mechanism transitions of the three defect types by defining key strain points.The impact of defect types on the failure process is also discussed.Furthermore,traction-separation curves extracted from microscopic defect evolutions serve as a bridge to connect the macro-scale model.The validity of the crack propagation model is confirmed through tensile tests.Finally,we thoroughly analyze how micro-defect types influence macro-crack propagation and attempt to find supporting evidence from the MD model.Our findings provide a multi-perspective reference for the reliability analysis of sintered AgNPs.
基金financially supported by the National Key Research and Development Program of China(Nos.2022 YFB3709300 and 2021YFB3701000)the National Natural Science Foundation of China(Nos.52271090 and 52071036)+1 种基金the Guangdong Major Project of Basic and Applied Basic Research(No.2020B0301030006)the Independent Research Project of State Key Laboratory of Mechanical Transmissions(Nos.SKLMT-ZZKT-2022Z01 and S KLMT-ZZKT-2022M12)。
文摘Magnesium and magnesium alloy foils have great potential for application in battery anodes,electromagnetic shielding,optics and acoustics,and biology because of their excellent specific damping,internal dissipation coefficients,magnetic and electrical conductivities,as well as high theoretical specific capacity.However,magnesium alloys exhibit poor deformation ability due to their hexagonal close-packed crystal structure.Preparing magnesium and magnesium alloy foils with thicknesses of less than 0.1 mm is difficult because of surface oxidation and grain growth at high temperatures or severe anisotropy after cold rolling that leads to cracks.Numerous methods have been applied to prepare magnesium alloy foils.They include warm rolling,cold rolling,accumulative roll bonding,electric plastic rolling,and on-line heating rolling.Defects of magnesium and magnesium alloy foils during preparation,such as edge cracks and breakage,are important factors for consideration.Herein,the current status of the research on magnesium and magnesium alloy foils is summarized from the aspects of foil preparation,defect control,performance characterization,and application prospects.The advantages and disadvantages of different preparation methods and defect(edge cracks and breakage)mechanisms in the preparation of foils are identified.
基金financial grants from DST,India,through the projects DST/TSG/PT/2009/23,DST/TMD/ICMAP/2K20/03,and DST/CRG/2019/002164,Deity,India,no.5(9)/2012-NANO(Vol.II)the Max-Planck-Gesellschaft IGSTC/MPG/PG(PKI)/2011A/48 and MHRD,India,through the SPARC project SPARC/2018-2019/P1097/SLPMRF(Prime Minister's Research Fellowship),Ministry of Education,Government of India for providing funds to carry out this research.
文摘The rapid advancement of halide-based hybrid perovskite materials has garnered significant research attention,particularly in the domain of photovoltaic technology.Owing to their exceptional optoelec-tronic properties,they demonstrated power conversion efficiency(PcE)of over 25%in single junction solar cells.Despite the notable progress in PCE over the past decade,the inherent high defect density pre-senting in perovskite materials gives rise to several loss mechanisms and associated ion migration in per-ovskite solar cells(PsCs)during operational conditions.These factors collectively contribute to a significant stability challenge in PsCs,placing their longevity far behind for commercialization.While numerous reports have explored defects,ion migration,and their impacts on device performance,a com-prehensive correlation between the types of defects and the degradation kinetics of perovskite materials and PsCs has been lacking.In this context,this review aims to provide a comprehensive overview of the origins of defects and ion migration,emphasizing their correlation with the degradation kinetics of per-ovskite materials and PsCs,leveraging reliable characterization techniques.Furthermore,these charac-terization techniques are intended to comprehend loss mechanisms by different passivation approaches to enhance the durability and PCE of PSCs.
基金supported by National Natural Science Foundation of China(Grant No.22001050,22072034)the China Postdoctoral Science Foundation(Grant No.2020T130147,2020M681084)+1 种基金the Postdoctoral Foundation of Heilongjiang Province(Grant No.LBH-Z19059)the Natural Science Foundation of Heilongjiang Youth Fund(Grant No.YQ2021B002)。
文摘Here,a novel strategy is proposed targeting the volatility of A-site cations and the disordered arrangement of perovskite grains through employing Cs~+contained metal-organic frameworks In-aip(Cs)obtained by ion-exchange and crystalline transform.Interatomic forces between Cs-O atoms split the pore channels of the pristine In-aip,endowing In-aip(Cs)with multidimensional charge transport channels,In addition,the partially freed Cs~+in the interlayer compensates for the vacancy of A-site cations during the perovskite preparation process.The In-aip(Cs)modified perovskite films have a flat morphology,large grains and excellent optoelectronic properties.Benefiting from the high-quality perovskite films and faster charge extraction,the In-aip(Cs)-modified PSCs achieved a champion PCE of 23.03%,superior to the In-aip-modified(22.29%)and control device(21.13%),More importantly,the unencapsulated PSCs modified with In-aip(Cs)exhibited outstanding humidity and thermal stability.Over a period of almost 1000 h,the unencapsulated In-aip(Cs)-modified device retained 85%of its initial PCE after storing in a glove box at 85℃,and retained 87%of the primary PCE upon storage in ambient condition at 25℃under a humidity of 40%.