The application of the strip-shaped cymba conchae orthosis in the nonsurgical correction of complex auricular deformity

Objective: This study aims to evaluate the efficacy and safety of using a strip-shaped cymba conchae orthosis for the nonsurgical correction of complex auricular deformities. Methods: Clinical data were collected from 2020 to 2021 for 6 patients who underwent correction using a stripshaped cymba conchae orthosis. The indications, corrective effects, and complications associated with use of the orthosis were analyzed. Results: There were four indications for treatment: cryptotia with helix adhesion;cryptotia with grade I microtia;cryptotia with excessive helix thickness;and auricular deformity beyond the treatment time window(≥6 months). Excellent corrective effects were observed in all 6 patients. Complications occurred in one patient, who recovered after symptomatic treatment. Conclusion: The use of a strip-shaped cymba conchae orthosis alone or combined with a U-shaped helix orthosis presents a feasible approach for correcting complex auricular deformities or deformities beyond the treatment time window in pediatric patients.

Clinical study of correction of finger flexion deformity in Dupuytren's disease

Objective To explore surgical technique and its result in correcting finger contracture in Dupuytren’s disease. Methods Seventeen cases of Dupuytren’s disease with 58 years mean age were studied in this group ( 15 males and 2 females) . Among them,8 sides were with flexion eontracture of little finger,8 sides with flexion contracture of little and ring fingers,1 side with

Correction of secondary deformity of unilateral cleft lip with refined anatomic repair in orbicularis oris muscle

Objective To investigate the functional repair of secondary deformity of unilateral cleft lip. Methods The nasal branch,nasolabial branch,and labial branch of orbicularis oris muscle were dissected and repositioned precisely to correct the secondary deformity of unilateral cleft lip. Results 96 parients were treated

Different types of mechanical complications after surgical correction of adult spine deformity with osteotomy

AIM To determine the incidence and risk factors for mechanical complications （MC） after surgical correction of adult spinal deformity （ASD） with osteotomy.METHODSA retrospective study was performed. Inclusion criteria： Surgical correction of ASD using osteotomy; male or female; 〉 20 years old; follow-up ≥ 24 mo or revision. The MC of spine and spinal instrumentation were studied separately. Risk analysis included assessment of the association between more than 50 different characteristics （demographic, clinical, radiographic, and instrumentation） with different types of MC.RESULTSThe medical records of 94 operations in 88 subjects were analyzed： Female （68%）, mean age 58.6 （SD, 12.7） years. Cumulative incidence of MC at 2 year follow-up was 43.6%. Of these, 78% required revision （ P 〈 0.001）. The following characteristics had significant （ P ≤ 0.05） association with MC： （1） Preoperative： osteoporosis, smoking, previous spinal operation, sagittal vertical axis （SVA） 〉 100 mm, lumbar lordosis （LL） 〈 34°; （2） postoperative： SVA 〉 75 mm; operative correction： SVA 〉 75 mm, LL 〉 30°, thoracic kyphosis 〉 25°, and pelvic tilt 〉 9°; a fall; pseudarthrosis; and （3） device and surgical technique： use of previously implanted instrumentation; use of domino and/or parallel connectors; type of osteotomy （PSO vs SPO） if preoperative SVA 〈 100 mm; lumbar osteotomy location; in-situ rod contouring 〉 60°; and fxation to sacrum/pelvis.CONCLUSIONRisk of MC after surgical correction of ASD is substantial. To decrease this risk over- and/or insuffcient correction of the sagittal imbalance should be avoided.

Proximal tibial osteotomy for genu varum:Radiological evaluation of deformity correction with a plate vs external fixator

BACKGROUND High tibial osteotomy(HTO)is a well-known procedure for the correction of knee varus.The purpose of this study was to compare the radiological results and accuracy of deformity correction performed using two different techniques:acute opening wedge correction using a plate and gradual correction with a monolateral external fixator.AIM To compare of the radiological results of two different techniques:acute opening wedge correction(a plate and screw)and gradual correction(external fixator).METHODS A total of 43 patients with plates and 36 patients with external fixators were included.All patients had moderate uniplanar varus deformities.We measured radiographic parameters,including the mechanical axis deviation(MAD),medial proximal tibial angle(MPTA),Caton-Deschamps Index(CDI),posterior proximal tibial angle,and joint line obliquity angle(JLOA).The accuracy of MAD correction was calculated based on a correction goal of neutral or overcorrection for medial compartment arthritis.RESULTS Demographics including age,body mass index,sex,and preoperative deformities were similar between the groups.The MAD significantly improved from 23.6 mm medial to the midline(SD=8.2 mm)to 6.9 mm lateral to the midline(SD=5.4 mm)(P<0.001).The accuracy of MAD correction did not differ between the groups and was 96.1%(SD=8.1%)in the plate group and 98.2%(SD=5.2%)in the external fixator group(P=0.18).The MPTA significantly improved from 83.9°(SD=2.9°)to 90.9°(SD=3.3°)(P<0.001),and the change was similar between the groups.Differences were noted in patella height,with a CDI change of-19.2%(SD=13.7%)and 3.1%(SD=8.0%)for the plate and external fixator groups,respectively(P<0.001).The change in JLOA was 1.6 degrees(SD=1.1 degrees)and 0.9 degrees(SD=0.9 degrees)for the plate and external fixator groups,respectively(P=0.04).CONCLUSION Reliable correction of moderate varus alignment was achieved with both the acute opening wedge technique with a plate and the gradual monolateral external fixator technique.The patellar height decreased with the open wedge plate technique.Joint line obliquity decreased to a greater degree with the open wedge plate technique,perhaps as a result of medial collateral ligament release.The appropriate technique should be selected based on surgeon and patient preferences;however,external fixation may be a better choice when the preservation of patellar height is deemed important.

Functional Dependence of IM and HV Angle in Hallux Valgus Deformity before and after Operative

Hallux valgus is a relatively common and multifaceted complex deformity of the front part of the foot. It is the result of multiple effects of innate (endogenous) and exogenous etiological factors with different degrees of influence. The degree of hallux valgus deformity is usually assessed by radiological values of hallux valgus (HV) and intermetatarsal (IM) angles. The aim of the paper is to justify the definition of hallux valgus deformity as a function of one angle, (HVA or IMA), and then to determine the functional connection and the most suitable function equalizing the values of the angles IMA and HVA. As hallux valgus is a double angulation deformity, the analytically determined connection between the HVA and IMA angles reduces the study of the deformity to the study of function with one argument, and makes the analysis of deformity changes before and after operative treatment simpler. For the determined connections between the angles, the values of linear proportionality coefficients and regression coefficients of corresponding linear functions of analytical equalization of the value of the IM angle and the degree of deformity for a given value of the HV angle were experimentally determined. The obtained results were checked on a sample of 396 operatively treated hallux valgus deformities. The presented analytical approach and the obtained functional links of IMA and HVA enable quantitative observation of the change in the degree of deformity based on the radiologically determined value of these angles, and the established nonlinear function will be useful for evaluating the expected value of the IM angle and the degree of deformity based only on the measured value of the HV angle. .

Effect of osteoarthritic knee flexion deformity correction by total knee arthroplasty on sagittal spinopelvic alignment in Indian population

BACKGROUND Sagittal alignment of the spine,pelvis,and lower extremities is essential for maintaining a stable and efficient posture and ambulation.Imbalance in any element can result in compensatory changes in the other elements.Knee flexion is a compensatory mechanism for spinopelvic sagittal alignment and is markedly affected in severe knee osteoarthritis(OA).The correction of knee flexion deformity(KFD)by total knee arthroplasty(TKA)can lead to complementary changes in the sagittal spinopelvic parameters(SSPs).AIM To determine the SSP changes in patients with knee OA,with or without KFD undergoing TKA.METHODS The study was conducted in 32 patients who underwent TKA.A neutral standing whole-spine lateral radiograph was performed before surgery and 3 mo after surgery in these patients.Subjects were divided into two groups(Group 1 obtained>10°corrections in KFD;group B obtained<10°correction).The pelvic tilt(PT),pelvic incidence(PI),sacral slope(SS),lumbar lordosis(LL),and sagittal vertical axis(SVA)were measured.RESULTS The median of change in PT,PI,SS,LL,and SVA was 0.20 mm,1.00 mm,2.20 mm,−0.40 mm,and 6.8 mm,respectively.The difference in the change in SSPs between the two groups was statistically non-significant.CONCLUSION SSPs,such as PI,PT,SS,LL,and SVA,do not change significantly following TKA in end-stage knee OA despite a significant correction(>10°)in KFD.

Correction of Scar Contracture Deformity of Dorsal Hand by Invisible Full-thickness Mesh Skin Graft

Objective To investigate the effect of invisible full-thickness mesh skin graft in the treatment of scar contracture deformity of the dorsal hand.Methods From January 2016 to February 2019,25 patients with cicatricial contracture deformity of dorsal hand admitted to our hospital underwent full thickness skin graft.During the operation,the scar healed completely and the superficial fascia remained intact.The wound surface was transplanted with invisible mesh full thickness skin graft.The survival of the skin graft and the recovery of hand function and appearance in the later period were observed after the operation.Results The skin grafts of 20 patients survived with high quality,3 cases had partial epidermis exfoliation,and 2 cases had partial epidermis scattered in blisters.After intensive dressing change,all wounds healed and no complications occurred after the operation.The hand function and appearance of the patients were obviously improved.Conclusion The application of full thickness skin graft to correct scar deformity has the advantages of good functional and appearance recovery and difficult postoperative contracture.Invisible full-thickness mesh skin graft is one of the ideal methods to correct scar contracture deformity of the dorsal hand.

Adaptation analysis and fusion correction method of CMIP6 precipitation simulation data on the Qinghai-Tibetan Plateau

In order to obtain more accurate precipitation data and better simulate the precipitation on the Tibetan Plateau,the simulation capability of 14 Coupled Model Intercomparison Project Phase 6(CMIP6)models of historical precipitation(1982-2014)on the Qinghai-Tibetan Plateau was evaluated in this study.Results indicate that all models exhibit an overestimation of precipitation through the analysis of the Taylor index,temporal and spatial statistical parameters.To correct the overestimation,a fusion correction method combining the Backpropagation Neural Network Correction(BP)and Quantum Mapping(QM)correction,named BQ method,was proposed.With this method,the historical precipitation of each model was corrected in space and time,respectively.The correction results were then analyzed in time,space,and analysis of variance(ANOVA)with those corrected by the BP and QM methods,respectively.Finally,the fusion correction method results for each model were compared with the Climatic Research Unit(CRU)data for significance analysis to obtain the trends of precipitation increase and decrease for each model.The results show that the IPSL-CM6A-LR model is relatively good in simulating historical precipitation on the Qinghai-Tibetan Plateau(R=0.7,RSME=0.15)among the uncorrected data.In terms of time,the total precipitation corrected by the fusion method has the same interannual trend and the closest precipitation values to the CRU data;In terms of space,the annual average precipitation corrected by the fusion method has the smallest difference with the CRU data,and the total historical annual average precipitation is not significantly different from the CRU data,which is better than BP and QM.Therefore,the correction effect of the fusion method on the historical precipitation of each model is better than that of the QM and BP methods.The precipitation in the central and northeastern parts of the plateau shows a significant increasing trend.The correlation coefficients between monthly precipitation and site-detected precipitation for all models after BQ correction exceed 0.8.

Osteotomy combined with anterior cruciate ligament reconstruction for anterior cruciate ligament injury and biplanar deformity

BACKGROUND It has been confirmed that the increased posterior tibial slope over 12 degrees is a risk factor for anterior cruciate ligament injury,and varus deformity can aggravate the progression of medial osteoarthritis.AIM To evaluate the efficacy of modified high tibial osteotomy(HTO)and anterior cruciate ligament reconstruction(ACLR)in the treatment of anterior cruciate ligament(ACL)injuries with varus deformities and increased posterior tibial slope(PTS)based on clinical and imaging data.METHODS The patient data in this retrospective study were collected from 2019 to 2021.A total of 6 patients were diagnosed with ACL injury combined with varus deformities and increased PTS.All patients underwent modified open wedge HTO and ACLR.The degree of correction of varus deformity and the PTS was evaluated by radiography and magnetic resonance imaging.RESULTS All 6 patients(6 knee joints)were followed up for an average of 20.8±3.7 months.The average age at surgery was 29.5±3.8 years.At the last follow-up,all patients resumed competitive sports.The International Knee Documentation Committee score increased from 50.3±3.1 to 87.0±2.8,the Lysholm score increased from 43.8±4.9 to 86±3.1,and the Tegner activity level increased from 2.2±0.7 to 7.0±0.6.The average movement distance of the tibia anterior translation was 4.8±1.1 mm,medial proximal tibial angle(MPTA)was 88.9±1.3°at the last follow-up,and the PTS was 8.4±1.4°,both of which were significantly higher than those before surgery(P<0.05).CONCLUSION Modified open wedge HTO combined with ACLR can effectively treat patients with ACL ruptures with an associated increased PTS and varus deformity.The short-term effect is significant,but the long-term effect requires further follow-up.

Silica Gel Implant in Correction of Secondary Cleft Lip Nasal Deformity.

This paper describes a new surgical techni-que for obtaining a better nasal contour in se-condary cleft lip nasal deformity. It involves re-moving of the curved septal cartilage and placinga piece of silica gel as a columellar strut in themiddle so as to correct the oblique

Correction:Nanomaterial-Based Repurposing of Macrophage Metabolism and Its Applications

Following publication of the original article[1],the authors reported an error in the last author’s name,it was mistakenly written as“Jun Den”.The correct author’s name“Jun Deng”has been updated in this Correction.

Correction: Surface Patterning of Metal ZincElectrode with an In-Region Zincophilic Interfacefor High-Rate and Long-Cycle-Life Zinc MetalAnode

Correction to:Nano-Micro Letters(2024)16:112 https://doi.org/10.1007/s40820-024-01327-2 In the supplementary information the following corrections have been carried out:1.Institute of Energy and Climate Research,Materials Synthesis and Processing,Forschungszentrum Jülich GmbH,52425 Jülich,Germany.Corrected:Institute of Energy and Climate Research:Materials Synthesis and Processing(IEK-1),Forschungszentrum Jülich GmbH,52425 Jülich,Germany.

Correction to:Error Calculation of Large-Amplitude Internal Solitary Waves Within the Pycnocline Introduced by the Strong Stratification Approximation

In the original publication the third author name is published incorrectly as“Hayatdavoodi Masoud”.The correct author name should be read as“Masoud Hayatdavoodi”.The correct author name is available in this correction.

Correction: MicroRNA-329-3p inhibits the Wnt/β-catenin pathway and proliferation of osteosarcoma cells by targeting transcription factor 7-like 1

In the article‘MicroRNA-329-3p inhibits the Wnt/β-catenin pathway and proliferation of osteosarcoma cells by targeting transcription factor 7-like 1’(Oncology Research,2024,Vol.32,No.3,pp.463−476.doi:10.32604/or.2023.044085),there was an error in the compilation of Fig.8D.We have revised Fig.8D to correct this error.A corrected version of Fig.8 is provided.This correction does not change any results or conclusions of the article.We apologize for any inconvenience caused.

Real-time model correction using Kalman filter for Raman-controlled cell culture processes

Raman spectroscopy has found extensive use in monitoring and controlling cell culture processes.In this context,the prediction accuracy of Raman-based models is of paramount importance.However,models established with data from manually fed-batch cultures often exhibit poor performance in Raman-controlled cultures.Thus,there is a need for effective methods to rectify these models.The objective of this paper is to investigate the efficacy of Kalman filter(KF)algorithm in correcting Raman-based models during cell culture.Initially,partial least squares(PLS)models for different components were constructed using data from manually fed-batch cultures,and the predictive performance of these models was compared.Subsequently,various correction methods including the PLS-KF-KF method proposed in this study were employed to refine the PLS models.Finally,a case study involving the auto-control of glucose concentration demonstrated the application of optimal model correction method.The results indicated that the original PLS models exhibited differential performance between manually fed-batch cultures and Raman-controlled cultures.For glucose,the root mean square error of prediction(RMSEP)of manually fed-batch culture and Raman-controlled culture was 0.23 and 0.40 g·L^(-1).With the implementation of model correction methods,there was a significant improvement in model performance within Raman-controlled cultures.The RMSEP for glucose from updating-PLS,KF-PLS,and PLS-KF-KF was 0.38,0.36 and 0.17 g·L^(-1),respectively.Notably,the proposed PLS-KF-KF model correction method was found to be more effective and stable,playing a vital role in the automated nutrient feeding of cell cultures.

Thermodynamics in a quantum corrected Reissner-Nordstr?m-AdS black hole and its GUP-corrections

We calculate the thermodynamic quantities in the quantum corrected Reissner-Nordstr?m-AdS(RN-AdS)black hole,and examine their quantum corrections.By analyzing the mass and heat capacity,we give the critical state and the remnant state,respectively,and discuss their consistency.Then,we investigate the quantum tunneling from the event horizon of massless scalar particle by using the null geodesic method,and charged massive boson W^(±)and fermions by using the Hamilton-Jacob method.It is shown that the same Hawking temperature can be obtained from these tunneling processes of different particles and methods.Next,by using the generalized uncertainty principle(GUP),we study the quantum corrections to the tunneling and the temperature.Then the logarithmic correction to the black hole entropy is obtained.

Iterative Subregion Correction Preconditioners with Adaptive Tolerance for Problems with Geometrically Localized Stiffness

We present a class of preconditioners for the linear systems resulting from a finite element or discontinuous Galerkin discretizations of advection-dominated problems.These preconditioners are designed to treat the case of geometrically localized stiffness,where the convergence rates of iterative methods are degraded in a localized subregion of the mesh.Slower convergence may be caused by a number of factors,including the mesh size,anisotropy,highly variable coefficients,and more challenging physics.The approach taken in this work is to correct well-known preconditioners such as the block Jacobi and the block incomplete LU(ILU)with an adaptive inner subregion iteration.The goal of these preconditioners is to reduce the number of costly global iterations by accelerating the convergence in the stiff region by iterating on the less expensive reduced problem.The tolerance for the inner iteration is adaptively chosen to minimize subregion-local work while guaranteeing global convergence rates.We present analysis showing that the convergence of these preconditioners,even when combined with an adaptively selected tolerance,is independent of discretization parameters(e.g.,the mesh size and diffusion coefficient)in the subregion.We demonstrate significant performance improvements over black-box preconditioners when applied to several model convection-diffusion problems.Finally,we present performance results of several variations of iterative subregion correction preconditioners applied to the Reynolds number 2.25×10^(6)fluid flow over the NACA 0012 airfoil,as well as massively separated flow at 30°angle of attack.

Automatic Miscalibration Detection and Correction of LiDAR and Camera Using Motion Cues

This paper aims to develop an automatic miscalibration detection and correction framework to maintain accurate calibration of LiDAR and camera for autonomous vehicle after the sensor drift.First,a monitoring algorithm that can continuously detect the miscalibration in each frame is designed,leveraging the rotational motion each individual sensor observes.Then,as sensor drift occurs,the projection constraints between visual feature points and LiDAR 3-D points are used to compute the scaled camera motion,which is further utilized to align the drifted LiDAR scan with the camera image.Finally,the proposed method is sufficiently compared with two representative approaches in the online experiments with varying levels of random drift,then the method is further extended to the offline calibration experiment and is demonstrated by a comparison with two existing benchmark methods.

Balancing act:The dilemma of rapid hyperglycemia correction in diabetes management

The global diabetes surge poses a critical public health challenge,emphasizing the need for effective glycemic control.However,rapid correction of chronic hyperglycemia can unexpectedly trigger microvascular complications,necessitating a reevaluation of the speed and intensity of glycemic correction.Theories suggest swift blood sugar reductions may cause inflammation,oxidative stress,and neurovascular changes,resulting in complications.Healthcare providers should cautiously approach aggressive glycemic control,especially in long-standing,poorly controlled diabetes.Preventing and managing these complications requires a personalized,comprehensive approach with education,monitoring,and interdisciplinary care.Diabetes management must balance short and longterm goals,prioritizing overall well-being.This editorial underscores the need for a personalized,nuanced approach,focusing on equilibrium between glycemic control and avoiding overcorrection.