This paper studies supersonic jet-cooled 1-fluoronaphthalene (1FN) clusters by ultraviolet (UV) laser ionization at 281 nm in a time-of-flight mass spectrometer. The (1FN)+ (n=1-3) series cluster ions are obs...This paper studies supersonic jet-cooled 1-fluoronaphthalene (1FN) clusters by ultraviolet (UV) laser ionization at 281 nm in a time-of-flight mass spectrometer. The (1FN)+ (n=1-3) series cluster ions are observed where the signal intensity decreases with increasing cluster size. The effects of sample inlet pressures and ionization laser fluxes to mass spectral distribution are measured. Using density functional theory calculations, it obtains a planar geometric structure of 1FN dimer which is combined through two hydrogen bonds. The mass spectra indicate that the intensity of 1FN trimer is much weaker than that of 1FN dimer and this feature is attributed to the fact that the dimer may form the first "shell" in geometric structure while the larger clusters are generated based on this fundamental unit.展开更多
Arsenic can diffuse into high-κ dielectrics during OaAs-based metal oxide semiconductor transistor process, which causes the degradation of gate dielectrics. To explore the origins of the degradation, we employ nonlo...Arsenic can diffuse into high-κ dielectrics during OaAs-based metal oxide semiconductor transistor process, which causes the degradation of gate dielectrics. To explore the origins of the degradation, we employ nonlocal B3LYP hybrid functional to study arsenic related defects in ZrO2. Via band alignments between the OaAs and ZrO2, we are able to determine the defect formation energy in the GaAs relative to the ZrO2 band gap and assess how they will affect the device performance. Arsenic at the interstitial site serves as a source of positive fixed charge while at the oxygen or zirconium substitutional site changes its charge state within the band gap of GaAs. Moreover, it is found that arsenic related defects produce conduction band offset reduction and gap states, which will increase the gate leakage current.展开更多
In this paper, we perform the density functional theory (DFT) -based calculations by the first-principles pseudopo- tential method to investigate the physical properties of the newly discovered superconductor LaRu2A...In this paper, we perform the density functional theory (DFT) -based calculations by the first-principles pseudopo- tential method to investigate the physical properties of the newly discovered superconductor LaRu2As2 for the first time. The optimized structural parameters are in good agreement with the experimental results. The calculated independent elas- tic constants ensure the mechanical stability of the compound. The calculated Cauchy pressure, Pugh's ratio as well as Poisson's ratio indicate that LaRu2As2 should behave as a ductile material. Due to low Debye temperature, LaRu2As2 may be used as a thermal barrier coating (TBC) material. The new compound should exhibit metallic nature as its valence bands overlap considerably with the conduction bands. LaRu2As2 is expected to be a soft material and easily machinable because of its low hardness value of 6.8 GPa. The multi-band nature is observed in the calculated Fermi surface. A highly anisotropic combination of ionic, covalent and metallic interactions is expected to be in accordance with charge density calculation.展开更多
A novel tetraethylenepentamine(TEPA) functionalized magnetic mesoporous silica adsorbent(FNMs/TEPA) was prepared for the adsorption of Cr(Ⅲ)-ethylenediaminetetraacetic acid(EDTA)from wastewater. The characterization ...A novel tetraethylenepentamine(TEPA) functionalized magnetic mesoporous silica adsorbent(FNMs/TEPA) was prepared for the adsorption of Cr(Ⅲ)-ethylenediaminetetraacetic acid(EDTA)from wastewater. The characterization of the prepared adsorbent certified that TEPA was modified onto the magnetic mesoporous silicon(FNMs), while FNMs/TEPA maintained the ordered mesoporous and pristine magnetic properties. The batch adsorption experiments demonstrated that TEPA significantly enhanced the removal capacity of the adsorbent for Cr(Ⅲ)-EDTA. FNMs/TEPA exhibited an excellent adsorption property(13.84 mg·g-1) at p H 4.0. Even in the presence of high concentrations of coexisting ions and organic acids, the adsorption performance of FNMs/TEPA was stable. Experimental characterization and DFT demonstrated that the adsorption of Cr(Ⅲ)-EDTA was ascribed to the electrostatic interaction, hydrogen bonding, and complexation between Cr(Ⅲ)-EDTA and amino groups on the adsorbent surface. The analysis of the independent gradient model(IGM) shows that electrostatic interaction is the main mode of action in the adsorption process. Moreover, FNMs/TEPA demonstrated remarkable reusability in three regeneration cycles. These findings indicated that FNMs/TEPA possessed excellent application prospects in the disposal of wastewater containing Cr(Ⅲ)-EDTA.展开更多
Rational design of high-performance electrocatalysts for hydrogen evolution reaction(HER)is vital for future renewable energy systems.The incorporation of foreign metal ions into catalysts can be an effective approach...Rational design of high-performance electrocatalysts for hydrogen evolution reaction(HER)is vital for future renewable energy systems.The incorporation of foreign metal ions into catalysts can be an effective approach to optimize its performance.However,there is a lack of systematic theoretical studies to reveal the quantitative relationships at the electronic level.Here,we develop a multi-level screening methodology to search for highly stable and active dopants for CoP catalysts.The density functional theory(DFT)calculations and symbolic regression(SR)were performed to investigate the relationship between the adsorption free energy(ΔG_(H^(*)))and 10 electronic parameters.The mathematic formulas derived from SR indicate that the difference of work function(ΔΦ)between doped metal and the acceptor plays the most important role in regulatingΔG_(H^(*)),followed by the d-band center(d-BC)of doped system.The descriptor of HER can be expressed asΔG_(H^(*))=1.59×√|0.188ΔΦ+d BC+0.120|1/2-0.166 with a high determination coefficient(R^(2)=0.807).Consistent with the theoretical prediction,experimental results show that the Al-CoP delivers superior electrocatalytic HER activity with a low overpotential of75 m V to drive a current density of 10 mA cm^(-2),while the overpotentials for undoped CoP,Mo-CoP,and V-CoP are 206,134,and 83 m V,respectively.The current work proves that theΔΦis the most significant regulatory parameter ofΔG_(H^(*))for ion-doped electrocatalysts.This finding can drive the discovery of high-performance ion-doped electrocatalysts,which is crucial for electrocatalytic water splitting.展开更多
A supramolecular 1D ferromagnetic system was studied experimentally as well as theoretically.Hybrid density functional theory(DFT) calculations were based on the X-ray analysis.The results of DFT calculations and Mc...A supramolecular 1D ferromagnetic system was studied experimentally as well as theoretically.Hybrid density functional theory(DFT) calculations were based on the X-ray analysis.The results of DFT calculations and McConnell mechanism have contributed to the understanding of the factors governing the exchange coupling of magnetism in the crystal packing.Both the experimental evidence and theoretical calculation indicate that spin density in 2-iodo nitronyl nitroxide(INN) radicals confirms 1D ferromagnetic chain with inter-chain antiferromagnetic interaction.展开更多
Nitrogen electro-reduction under mild conditions is one promising alternative approach of the energyconsuming Haber-Bosch process for the artificial ammonia synthesis.One critical aspect to unlocking this technology i...Nitrogen electro-reduction under mild conditions is one promising alternative approach of the energyconsuming Haber-Bosch process for the artificial ammonia synthesis.One critical aspect to unlocking this technology is to discover the catalysts with high selectivity and efficiency.In this work,the N_(2)-to-NH_(3)conversion on the functional MoS_(2)is fully investigated by density functional theory calculations since the layered MoS_(2)provides the ideal platform for the elaborating copies of the nitrogenase found in nature,wherein the functionalization is achieved via basal-adsorption,basal-substitution or edge-substitution of transition metal elements.Our results reveal that the edge-functionalization is a feasible strategy for the activity promotion;however,the basal-adsorption and basal-substitution separately suffer from the electrochemical instability and the NRR inefficiency.Specifically,MoS_(2)functionalized via edge W-substitution exhibits an exceptional activity.The energetically favored reaction pathway is through the distal pathway and a limiting potential is less than 0.20 V.Overall,this work escalates the rational design of the high-effective catalysts for nitrogen fixation and provides the explanation why the predicated catalyst have a good performance,paving the guidance for the experiments.展开更多
Layer-type LiNi0.9Mn0.1O2is promising to be the primary cathode material for lithium-ion batteries(LIBs)due to its excellent electrochemical performance.Unfortunately,the cathode with high nickel content suffers from ...Layer-type LiNi0.9Mn0.1O2is promising to be the primary cathode material for lithium-ion batteries(LIBs)due to its excellent electrochemical performance.Unfortunately,the cathode with high nickel content suffers from severely detrimental structural transformation that causes rapid capacity attenuation.Herein,site-specific dual-doping with Fe and Mg ions is proposed to enhance the structural stability of LiNi0.9Mn0.1O2.The Fe3+dopants are inserted into transition metal sites(3b)and can favorably provide additional redox potential to compensate for charge and enhance the reversibility of anionic redox.The Mg ions are doped into the Li sites(3a)and serve as O_(2)^(-)-Mg^(2+)-O_(2)^(-)pillar to reinforce the electrostatic cohesion between the two adjacent transition-metal layers,which further suppress the cracking and the generation of harmful phase transitions,ultimately improving the cyclability.The theoretical calculations,including Bader charge and crystal orbital Hamilton populations(COHP)analyses,confirm that the doped Fe and Mg can form stable bonds with oxygen and the electrostatic repulsion of O_(2)^(-)-O_(2)^(-)can be effectively suppressed,which effectively mitigates oxygen anion loss at the high delithiation state.This dual-site doping strategy offers new avenues for understanding and regulating the crystalline oxygen redox and demonstrates significant potential for designing high-performance cobalt-free nickel-rich cathodes.展开更多
Precision engineering of catalytic sites to guide more favorable pathways for Li_(2)O_(2) nucleation and decom-position represents an enticing kinetic strategy for mitigating overpotential,enhancing discharge capac-it...Precision engineering of catalytic sites to guide more favorable pathways for Li_(2)O_(2) nucleation and decom-position represents an enticing kinetic strategy for mitigating overpotential,enhancing discharge capac-ity,and improving recycling stability of Li-O_(2) batteries.In this work,we employ metal-organic frameworks(MOFs)derivation and ion substitution strategies to construct atomically dispersed Mn-N_(4) moieties on hierarchical porous nitrogen-doped carbon(Mn SAs-NC)with the aim of reducing the over-potential and improving the cycling stability of Li-O_(2) batteries.The porous structure provides more chan-nels for mass transfer and exposes more highly active sites for electrocatalytic reactions,thus promoting the formation and decomposition of Li_(2)O_(2).The Li-O_(2) batteries with Mn SAs-NC cathode achieve lower overpotential,higher specific capacity(14290 mA h g^(-1) at 100 mAg^(-1)),and superior cycle stability(>100 cycles at 200 mA g^(-1))compared with the Mn NPs-NC and NC.Density functional theory(DFT)cal-culations reveal that the construction of Mn-N_(4) moiety tunes the charge distribution of the pyridinic N-rich vacancy and balances the affinity of the intermediates(LiO_(2) and Li_(2)O_(2)).The initial nucleation of Li_(2)O_(2) on Mn SAs-NC favors the O_(2)-→LiO_(2)→Li_(2)O_(2) surface-adsorption pathway,which mitigates the overpoten-tials of the oxygen reduction(ORR)and oxygen evolution reaction(OER).As a result,Mn SAs-NC with Mn-N_(4) moiety effectively facilitates the Li_(2)O_(2) nucleation and enables its reversible decomposition.This work establishes a methodology for constructing carbon-based electrocatalysts with high activity and selectivity for Li-O_(2)batteries.展开更多
Molecular copper catalysts serve as exemplary models for correlating the structure-reaction-mechanism relationship in the electrochemical CO_(2) reduction(eCO_(2)R),owing to their adaptable environments surrounding th...Molecular copper catalysts serve as exemplary models for correlating the structure-reaction-mechanism relationship in the electrochemical CO_(2) reduction(eCO_(2)R),owing to their adaptable environments surrounding the copper metal centres.This investigation,employing density functional theory calculations,focuses on a novel family of binuclear Cu molecular catalysts.The modulation of their coordination configuration through the introduction of organic groups aims to assess their efficacy in converting CO_(2) to C_(2)products.Our findings highlight the crucial role of chemical valence state in shaping the characteristics of binuclear Cu catalysts,consequently influencing the eCO_(2)R behaviour,Notably,the Cu(Ⅱ)Cu(Ⅱ)macrocycle catalyst exhibits enhanced suppression of the hydrogen evolution reaction(HER),facilitating proton trans fer and the eCO_(2)R process.Fu rthermore,we explo re the impact of diverse electro n-withdrawing and electron-donating groups coordinated to the macrocycle(R=-F,-H,and-OCH_3)on the electron distribution in the molecular catalysts.Strategic placement of-OCH_3 groups in the macrocycles leads to a favourable oxidation state of the Cu centres and subsequent C-C coupling to form C_(2) products.This research provides fundamental insights into the design and optimization of binuclear Cu molecular catalysts for the electrochemical conversion of CO_(2) to value-added C_(2) products.展开更多
Metal-air batteries,like Zn-air batteries(ZABs)are usually suffered from low energy conversion efficiency and poor cyclability caused by the sluggish OER and ORR at the air cathode.Herein,a novel bimetallic Co/CoFe na...Metal-air batteries,like Zn-air batteries(ZABs)are usually suffered from low energy conversion efficiency and poor cyclability caused by the sluggish OER and ORR at the air cathode.Herein,a novel bimetallic Co/CoFe nanomaterial supported on nanoflower-like N-doped graphitic carbon(NC)was prepared through a strategy of coordination construction-cation exchange-pyrolysis and used as a highly efficient bifunctional oxygen electrocatalyst.Experimental characterizations and density functional theory calculations reveal the formation of Co/CoFe heterostructure and synergistic effect between metal layer and NC support,leading to improved electric conductivity,accelerated reaction kinetics,and optimized adsorption energy for intermediates of ORR and OER.The Co/CoFe@NC exhibits high bifunctional activities with a remarkably small potential gap of 0.70 V between the half-wave potential(E_(1/2))of ORR and the potential at 10 mA cm^(-2)(E_(j=10))of OER.The aqueous ZAB constructed using this air electrode exhibits a slight voltage loss of only 60 mV after 550-cycle test(360 h,15 days).A sodium polyacrylate(PANa)-based hydrogel electrolyte was synthesized with strong water-retention capability and high ionic conductivity.The quasi-solid-state ZAB by integrating the Co/CoFe@NC air electrode and PANa hydrogel electrolyte demonstrates excellent mechanical stability and cyclability under different bending states.展开更多
The rational fabrication of heterostructures is one of efficient strategies for improving photocatalytic performance of semiconductor photocatalysts.Very recently,Domen and co-workers found that Ta_(3)N_(5) single cry...The rational fabrication of heterostructures is one of efficient strategies for improving photocatalytic performance of semiconductor photocatalysts.Very recently,Domen and co-workers found that Ta_(3)N_(5) single crystals grown on the surface of KTaO_(3) can accomplish photocatalytic overall water splitting for the first time.In order to comprehend the underlying mechanism of this photocatalytic system,we have performed a systematic study based on density functional theory first-principles calculations.Ta_(3)N_(5)(010)/KTaO_(3)(110)slab models have been built according to experimental observations by considering two common terminations of KTaO_(3)(110)surface,named as Ta_(3)N_(5)/O_(2) and Ta_(3)N_(5)/KTaO.The formations of interfacial bonds are thermodynamically stable,showing a covalent interaction between two components of a heterostructure.Ta_(3)N_(5)/O_(2) has a higher mobility of photogenerated charge carriers and lower recombination rate of charge carriers than Ta_(3)N_(5)/KTaO.The light absorption of heterostructures displays the feature of KTaO_(3) in the short wavelength region and the characteristic of Ta_(3)N_(5) in the long wavelength region.The calculated band offsets show that Ta_(3)N_(5)/O_(2) and Ta_(3)N_(5)/KTaO have distinct Type-II band alignments,with Ta_(3)N_(5) as the accumulator of photoinduced electrons in the former and the collector of photogenerated holes in the latter,respectively.The difference in charge density and electrostatic potential between two components acts as a driving force to promote the transfer of electrons and holes to different domains of the interface,which is beneficial to extend the lifetime of photoinduced carriers.Our results demonstrate that the function of Ta_(3)N_(5) in Ta_(3)N_(5)/KTaO_(3) photocatalytic system is determined by the termination property of KTaO_(3)(110)surface,which provides a likely reason of the observed photocatalytic activity of overall water splitting achieved by Ta_(3)N_(5) synthesized by using KTaO_(3) as a precursor for the nitridation reaction.展开更多
We used density functional theory(DFT)calculations to study the influence of alkali earth metal element(AE)doping on the crystal structure and electronic band structure ofα-Si3N4.The diversity of atomic radii of alka...We used density functional theory(DFT)calculations to study the influence of alkali earth metal element(AE)doping on the crystal structure and electronic band structure ofα-Si3N4.The diversity of atomic radii of alkaline earth metal elements results in structural expansion when they were doped into theα-Si3N4 lattice.Formation energies of the doped structures indicate that dopants prefer to occupy the interstitial site under the nitrogen-deficient environment,while substitute Si under the nitrogen-rich environment,which provides a guide to synthesizingα-Si3N4 with different doping types by controlling nitrogen conditions.For electronic structures,energy levels of the dopants appear in the bottom of the conduction band or the top of the valence band or the forbidden band,which reduces the bandgap ofα-Si3N4.展开更多
Diatomic catalysts(DACs)with two adjacent metal atoms supported on graphene can offer diverse functionalities,overcoming the inherent limitations of single atom catalysts(SACs).In this study,density functional theory ...Diatomic catalysts(DACs)with two adjacent metal atoms supported on graphene can offer diverse functionalities,overcoming the inherent limitations of single atom catalysts(SACs).In this study,density functional theory calculations were conducted to investigate the reactivity of the carbon dioxide(CO_(2))reduction reaction(CO_(2)RR)on metal sites of both DACs and SACs,as well as their synergistic effects on activity and selectivity.Calculation of the Gibbs free energies of CO_(2)RR and associated values of the limiting potentials to generate C_(1) products showed that Cu acts as a promoter rather than an active catalytic centre in the catalytic CO_(2)conversion on heteronuclear DACs(CuN_(4)-MN_(4)),improving the catalytic activity on the other metal compared to the related SAC MN_(4).Cu enhances the initial reduction of CO_(2)by promoting orbital hybridization between the key intermediate*COOH 2p-orbitals and the metals 3d-orbitals around the Fermi level.This degree of hybridization in the DACs CuN_(4)-MN_(4) decreases from Fe to Co,Ni,and Zn.Our work demonstrates how Cu regulates the CO_(2)RR performance of heteronuclear DACs,offering an effective approach to designing practical,stable,and high-performing diatomic catalysts for CO_(2)electroreduction.展开更多
The synthesis of oxygen vacancies(OVs)-modified TiO_(2)under mild conditions is attractive.In this work,OVs were easily introduced in TiO_(2)lattice during the hydrothermal doping process of trivalent iron ions.Theore...The synthesis of oxygen vacancies(OVs)-modified TiO_(2)under mild conditions is attractive.In this work,OVs were easily introduced in TiO_(2)lattice during the hydrothermal doping process of trivalent iron ions.Theoretical calculations based on a novel charge-compensation structure model were employed with experimental methods to reveal the intrinsic photocatalytic mechanism of Fe-doped TiO_(2)(Fe-TiO_(2)).The OVs formation energy in Fe-TiO_(2)(1.12 eV)was only 23.6%of that in TiO_(2)(4.74 eV),explaining why Fe^(3+)doping could introduce OVs in the TiO_(2)lattice.The calculation results also indicated that impurity states introduced by Fe^(3+)and OVs enhanced the light absorption activity of TiO_(2).Additionally,charge carrier transport was investigated through the carrier lifetime and relative mass.The carrier lifetime of Fe-TiO_(2)(4.00,4.10,and 3.34 ns for 1at%,2at%,and 3at%doping contents,respectively)was longer than that of undoped TiO_(2)(3.22 ns),indicating that Fe^(3+) and OVs could promote charge carrier separation,which can be attributed to the larger relative effective mass of electrons and holes.Herein,Fe-TiO_(2)has higher photocatalytic indoor NO removal activity compared with other photocatalysts because it has strong light absorption activity and high carrier separation efficiency.展开更多
The plane wave pseudo-potential method was used to investigate the structural, electronic, and elastic properties of Cd Se_(1-x)Te_x in the zinc blende phase. It is observed that the electronic properties are improv...The plane wave pseudo-potential method was used to investigate the structural, electronic, and elastic properties of Cd Se_(1-x)Te_x in the zinc blende phase. It is observed that the electronic properties are improved considerably by using LDA + U as compared to the LDA approach. The calculated lattice constants and bulk moduli are also comparable to the experimental results. The cohesive energies for pure Cd Se and Cd Te binary and their mixed alloys are calculated. The second-order elastic constants are also calculated by the Lagrangian theory of elasticity. The elastic properties show that the studied material has a ductile nature.展开更多
Due to low cost,high capacity,and high energy density,lithium–sulfur(Li–S)batteries have attracted much attention;however,their cycling performance was largely limited by the poor redox kinetics and low sulfur utili...Due to low cost,high capacity,and high energy density,lithium–sulfur(Li–S)batteries have attracted much attention;however,their cycling performance was largely limited by the poor redox kinetics and low sulfur utilization.Herein,predicted by density functional theory calculations,single‐atomic Co‐B2N2 site‐imbedded boron and nitrogen co‐doped carbon nanotubes(SA‐Co/BNC)were designed to accomplish high sulfur loading,fast kinetic,and long service period Li–S batteries.Experiments proved that Co‐B2N2 atomic sites can effectively catalyze lithium polysulfide conversion.Therefore,the electrodes delivered a specific capacity of 1106 mAh g−1 at 0.2 C after 100 cycles and exhibited an outstanding cycle performance over 1000 cycles at 1 C with a decay rate of 0.032%per cycle.Our study offers a new strategy to couple the combined effect of nanocarriers and single‐atomic catalysts in novel coordination environments for high‐performance Li–S batteries.展开更多
Scaled-up industrial water electrolysis equipment that can be used with abundant seawater is key for affordable hydrogen production.The search for highly stable,dynamic,and economical electrocatalysts could have a sig...Scaled-up industrial water electrolysis equipment that can be used with abundant seawater is key for affordable hydrogen production.The search for highly stable,dynamic,and economical electrocatalysts could have a significant impact on hydrogen commercialization.Herein,we prepared energy-efficient,scalable,and engineering electronic structure modulated Mn-Ni bimetal oxides(Mn_(0.25)Ni_(0.75)O)through simple hydrothermal followed by calcination method.As-optimized Mn_(0.25)Ni_(0.75)O displayed enhanced oxygen and hydrogen evolution reaction(OER and HER)performance with overpotentials of 266 and115 mV at current densities of 10 mA cm^(-2)in alkaline KOH added seawater electrolyte solution.Additionally,Mn-Ni oxide catalytic benefits were attributed to the calculated electronic configurations and Gibbs free energy for OER,and HER values were estimated using first principles calculations.In real-time practical application,we mimicked industrial operating conditions with modified seawater electrolysis using Mn_(0.25)Ni_(0.75)O‖Mn_(0.25)Ni_(0.75)O under various temperature conditions,which performs superior to the commercial IrO_(2)‖Pt-C couple.These findings demonstrate an inexpensive and facile technique for feasible large-scale hydrogen production.展开更多
A sol-gel tandem with a solid-phase modification procedure was developed to synthesize Li_(2)TiO_(3)-doped LiCoO_(2) together with phosphate coatings(denoted as LCO-Ti/P),which possesses excellent high-voltage perform...A sol-gel tandem with a solid-phase modification procedure was developed to synthesize Li_(2)TiO_(3)-doped LiCoO_(2) together with phosphate coatings(denoted as LCO-Ti/P),which possesses excellent high-voltage performance in the range of 3.0-4.6 V.The characterizations of X-ray diffraction,high-resolution transmission electron microscopy,and X-ray photoelectron spectroscopy illustrated that the modified sample LCO-Ti/P had the dopant of monoclinic Li_(2)TiO_(3) and amorphous Li3PO4 coating layers.LCO-Ti/P has an initial discharge capacity of 211.6 mAh/g at 0.1 C and a retention of 85.7%after 100 cycles at 1 C and 25±1°C between 3.0 and 4.6 V.Nyquist plots reflect that the charge transfer resistance of LCO-Ti/P after 100 cycles at 1 C is much lower than that of the spent LCO,which benefits Li-ion diffusion.Density functional theory calculations disclose the superior lattice-matching property of major crystal planes for Li_(2)TiO_(3) and LiCoO_(2),the lower energy barriers for Li-ion diffusion in Li_(2)TiO_(3),and the suppressed oxygen release performance resulting from phosphate adsorption.This work provides useful guidance on the rational design of the high-voltage performance of modified LiCoO_(2) materials in terms of lattice-matching properties aside from the phosphate coating to reduce the energy barriers of Li-ion diffusion and enhance cycling stability.展开更多
The role of additional ternary alloying elements on the performance of stationary TiFe-based hydrogen storage alloys was investigated based on first-principles density functional theory calculations.As a basic step fo...The role of additional ternary alloying elements on the performance of stationary TiFe-based hydrogen storage alloys was investigated based on first-principles density functional theory calculations.As a basic step for examinations,the site preference of each alloying element in the stoichiometric and nonstoichiometric B2TiFe compounds was clarified considering possible antisite defects.Based on the revealed site preference,the effect of various possible ternary elements on the hydrogen storage was examined by focusing on the formation enthalpies of TiFeH and TiFeH_(2) hydrides,which were closely related to the change in the location of plateaus in the pressure-composition-temperature curve.Several physical properties such as the volume expansion due to hydride formation were also examined to provide additional criteria for selecting optimum alloying conditions in future alloying design processes.Candidate alloying elements that maximize the grain boundary embrittlement due to the solute segregation were proposed for the enhanced initial activation of TiFe-based hydrogen storage alloys.展开更多
文摘This paper studies supersonic jet-cooled 1-fluoronaphthalene (1FN) clusters by ultraviolet (UV) laser ionization at 281 nm in a time-of-flight mass spectrometer. The (1FN)+ (n=1-3) series cluster ions are observed where the signal intensity decreases with increasing cluster size. The effects of sample inlet pressures and ionization laser fluxes to mass spectral distribution are measured. Using density functional theory calculations, it obtains a planar geometric structure of 1FN dimer which is combined through two hydrogen bonds. The mass spectra indicate that the intensity of 1FN trimer is much weaker than that of 1FN dimer and this feature is attributed to the fact that the dimer may form the first "shell" in geometric structure while the larger clusters are generated based on this fundamental unit.
基金Supported by the Key Project of Education Department of China under Grant No 211035the Science Foundation from Education Department of Liaoning Province under Grant No L2014445
文摘Arsenic can diffuse into high-κ dielectrics during OaAs-based metal oxide semiconductor transistor process, which causes the degradation of gate dielectrics. To explore the origins of the degradation, we employ nonlocal B3LYP hybrid functional to study arsenic related defects in ZrO2. Via band alignments between the OaAs and ZrO2, we are able to determine the defect formation energy in the GaAs relative to the ZrO2 band gap and assess how they will affect the device performance. Arsenic at the interstitial site serves as a source of positive fixed charge while at the oxygen or zirconium substitutional site changes its charge state within the band gap of GaAs. Moreover, it is found that arsenic related defects produce conduction band offset reduction and gap states, which will increase the gate leakage current.
文摘In this paper, we perform the density functional theory (DFT) -based calculations by the first-principles pseudopo- tential method to investigate the physical properties of the newly discovered superconductor LaRu2As2 for the first time. The optimized structural parameters are in good agreement with the experimental results. The calculated independent elas- tic constants ensure the mechanical stability of the compound. The calculated Cauchy pressure, Pugh's ratio as well as Poisson's ratio indicate that LaRu2As2 should behave as a ductile material. Due to low Debye temperature, LaRu2As2 may be used as a thermal barrier coating (TBC) material. The new compound should exhibit metallic nature as its valence bands overlap considerably with the conduction bands. LaRu2As2 is expected to be a soft material and easily machinable because of its low hardness value of 6.8 GPa. The multi-band nature is observed in the calculated Fermi surface. A highly anisotropic combination of ionic, covalent and metallic interactions is expected to be in accordance with charge density calculation.
基金supported by the National Natural Science Foundation of China(22076111)Key Research and Development Program of Shaanxi(2024GX-YBXM-427),China.
文摘A novel tetraethylenepentamine(TEPA) functionalized magnetic mesoporous silica adsorbent(FNMs/TEPA) was prepared for the adsorption of Cr(Ⅲ)-ethylenediaminetetraacetic acid(EDTA)from wastewater. The characterization of the prepared adsorbent certified that TEPA was modified onto the magnetic mesoporous silicon(FNMs), while FNMs/TEPA maintained the ordered mesoporous and pristine magnetic properties. The batch adsorption experiments demonstrated that TEPA significantly enhanced the removal capacity of the adsorbent for Cr(Ⅲ)-EDTA. FNMs/TEPA exhibited an excellent adsorption property(13.84 mg·g-1) at p H 4.0. Even in the presence of high concentrations of coexisting ions and organic acids, the adsorption performance of FNMs/TEPA was stable. Experimental characterization and DFT demonstrated that the adsorption of Cr(Ⅲ)-EDTA was ascribed to the electrostatic interaction, hydrogen bonding, and complexation between Cr(Ⅲ)-EDTA and amino groups on the adsorbent surface. The analysis of the independent gradient model(IGM) shows that electrostatic interaction is the main mode of action in the adsorption process. Moreover, FNMs/TEPA demonstrated remarkable reusability in three regeneration cycles. These findings indicated that FNMs/TEPA possessed excellent application prospects in the disposal of wastewater containing Cr(Ⅲ)-EDTA.
基金Financial support from the National Natural Science Foundation of China(21676216)the Special project of Shaanxi Provincial Education Department(20JC034)+1 种基金GHfund B(202202022563)Hefei Advanced Computing Center。
文摘Rational design of high-performance electrocatalysts for hydrogen evolution reaction(HER)is vital for future renewable energy systems.The incorporation of foreign metal ions into catalysts can be an effective approach to optimize its performance.However,there is a lack of systematic theoretical studies to reveal the quantitative relationships at the electronic level.Here,we develop a multi-level screening methodology to search for highly stable and active dopants for CoP catalysts.The density functional theory(DFT)calculations and symbolic regression(SR)were performed to investigate the relationship between the adsorption free energy(ΔG_(H^(*)))and 10 electronic parameters.The mathematic formulas derived from SR indicate that the difference of work function(ΔΦ)between doped metal and the acceptor plays the most important role in regulatingΔG_(H^(*)),followed by the d-band center(d-BC)of doped system.The descriptor of HER can be expressed asΔG_(H^(*))=1.59×√|0.188ΔΦ+d BC+0.120|1/2-0.166 with a high determination coefficient(R^(2)=0.807).Consistent with the theoretical prediction,experimental results show that the Al-CoP delivers superior electrocatalytic HER activity with a low overpotential of75 m V to drive a current density of 10 mA cm^(-2),while the overpotentials for undoped CoP,Mo-CoP,and V-CoP are 206,134,and 83 m V,respectively.The current work proves that theΔΦis the most significant regulatory parameter ofΔG_(H^(*))for ion-doped electrocatalysts.This finding can drive the discovery of high-performance ion-doped electrocatalysts,which is crucial for electrocatalytic water splitting.
基金Supported by the National Natural Science Foundation of China(No.21061009)
文摘A supramolecular 1D ferromagnetic system was studied experimentally as well as theoretically.Hybrid density functional theory(DFT) calculations were based on the X-ray analysis.The results of DFT calculations and McConnell mechanism have contributed to the understanding of the factors governing the exchange coupling of magnetism in the crystal packing.Both the experimental evidence and theoretical calculation indicate that spin density in 2-iodo nitronyl nitroxide(INN) radicals confirms 1D ferromagnetic chain with inter-chain antiferromagnetic interaction.
基金financial support from the National Natural Science Foundation of China(21503097,52130101,51701152,21806023,and 51702345)China Scholarship Council(202008320215).
文摘Nitrogen electro-reduction under mild conditions is one promising alternative approach of the energyconsuming Haber-Bosch process for the artificial ammonia synthesis.One critical aspect to unlocking this technology is to discover the catalysts with high selectivity and efficiency.In this work,the N_(2)-to-NH_(3)conversion on the functional MoS_(2)is fully investigated by density functional theory calculations since the layered MoS_(2)provides the ideal platform for the elaborating copies of the nitrogenase found in nature,wherein the functionalization is achieved via basal-adsorption,basal-substitution or edge-substitution of transition metal elements.Our results reveal that the edge-functionalization is a feasible strategy for the activity promotion;however,the basal-adsorption and basal-substitution separately suffer from the electrochemical instability and the NRR inefficiency.Specifically,MoS_(2)functionalized via edge W-substitution exhibits an exceptional activity.The energetically favored reaction pathway is through the distal pathway and a limiting potential is less than 0.20 V.Overall,this work escalates the rational design of the high-effective catalysts for nitrogen fixation and provides the explanation why the predicated catalyst have a good performance,paving the guidance for the experiments.
基金the financial supports from the Key Research and Development Project in Shaanxi Province(2023-YBGY-446)the Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering(2022SX-TD003)。
文摘Layer-type LiNi0.9Mn0.1O2is promising to be the primary cathode material for lithium-ion batteries(LIBs)due to its excellent electrochemical performance.Unfortunately,the cathode with high nickel content suffers from severely detrimental structural transformation that causes rapid capacity attenuation.Herein,site-specific dual-doping with Fe and Mg ions is proposed to enhance the structural stability of LiNi0.9Mn0.1O2.The Fe3+dopants are inserted into transition metal sites(3b)and can favorably provide additional redox potential to compensate for charge and enhance the reversibility of anionic redox.The Mg ions are doped into the Li sites(3a)and serve as O_(2)^(-)-Mg^(2+)-O_(2)^(-)pillar to reinforce the electrostatic cohesion between the two adjacent transition-metal layers,which further suppress the cracking and the generation of harmful phase transitions,ultimately improving the cyclability.The theoretical calculations,including Bader charge and crystal orbital Hamilton populations(COHP)analyses,confirm that the doped Fe and Mg can form stable bonds with oxygen and the electrostatic repulsion of O_(2)^(-)-O_(2)^(-)can be effectively suppressed,which effectively mitigates oxygen anion loss at the high delithiation state.This dual-site doping strategy offers new avenues for understanding and regulating the crystalline oxygen redox and demonstrates significant potential for designing high-performance cobalt-free nickel-rich cathodes.
基金supported by the National Natural Science Foundation of China (21878340)supported in part by the High-Performance Computing Center of Central South University
文摘Precision engineering of catalytic sites to guide more favorable pathways for Li_(2)O_(2) nucleation and decom-position represents an enticing kinetic strategy for mitigating overpotential,enhancing discharge capac-ity,and improving recycling stability of Li-O_(2) batteries.In this work,we employ metal-organic frameworks(MOFs)derivation and ion substitution strategies to construct atomically dispersed Mn-N_(4) moieties on hierarchical porous nitrogen-doped carbon(Mn SAs-NC)with the aim of reducing the over-potential and improving the cycling stability of Li-O_(2) batteries.The porous structure provides more chan-nels for mass transfer and exposes more highly active sites for electrocatalytic reactions,thus promoting the formation and decomposition of Li_(2)O_(2).The Li-O_(2) batteries with Mn SAs-NC cathode achieve lower overpotential,higher specific capacity(14290 mA h g^(-1) at 100 mAg^(-1)),and superior cycle stability(>100 cycles at 200 mA g^(-1))compared with the Mn NPs-NC and NC.Density functional theory(DFT)cal-culations reveal that the construction of Mn-N_(4) moiety tunes the charge distribution of the pyridinic N-rich vacancy and balances the affinity of the intermediates(LiO_(2) and Li_(2)O_(2)).The initial nucleation of Li_(2)O_(2) on Mn SAs-NC favors the O_(2)-→LiO_(2)→Li_(2)O_(2) surface-adsorption pathway,which mitigates the overpoten-tials of the oxygen reduction(ORR)and oxygen evolution reaction(OER).As a result,Mn SAs-NC with Mn-N_(4) moiety effectively facilitates the Li_(2)O_(2) nucleation and enables its reversible decomposition.This work establishes a methodology for constructing carbon-based electrocatalysts with high activity and selectivity for Li-O_(2)batteries.
基金the HUST-QMUL Strategic Partnership Research Funding(No.2022-HUST-QMUL-SPRF-03),which funded the project“Design of Binuclear Copper Electrocatalysts for CO_(2) Conversion from First Principles”the China Scholarship Council for financial support。
文摘Molecular copper catalysts serve as exemplary models for correlating the structure-reaction-mechanism relationship in the electrochemical CO_(2) reduction(eCO_(2)R),owing to their adaptable environments surrounding the copper metal centres.This investigation,employing density functional theory calculations,focuses on a novel family of binuclear Cu molecular catalysts.The modulation of their coordination configuration through the introduction of organic groups aims to assess their efficacy in converting CO_(2) to C_(2)products.Our findings highlight the crucial role of chemical valence state in shaping the characteristics of binuclear Cu catalysts,consequently influencing the eCO_(2)R behaviour,Notably,the Cu(Ⅱ)Cu(Ⅱ)macrocycle catalyst exhibits enhanced suppression of the hydrogen evolution reaction(HER),facilitating proton trans fer and the eCO_(2)R process.Fu rthermore,we explo re the impact of diverse electro n-withdrawing and electron-donating groups coordinated to the macrocycle(R=-F,-H,and-OCH_3)on the electron distribution in the molecular catalysts.Strategic placement of-OCH_3 groups in the macrocycles leads to a favourable oxidation state of the Cu centres and subsequent C-C coupling to form C_(2) products.This research provides fundamental insights into the design and optimization of binuclear Cu molecular catalysts for the electrochemical conversion of CO_(2) to value-added C_(2) products.
基金This work was supported by the National Natural Science Foundation of China(21872105,22072107)the Science&Technology Commission of Shanghai Municipality(19DZ2271500).
文摘Metal-air batteries,like Zn-air batteries(ZABs)are usually suffered from low energy conversion efficiency and poor cyclability caused by the sluggish OER and ORR at the air cathode.Herein,a novel bimetallic Co/CoFe nanomaterial supported on nanoflower-like N-doped graphitic carbon(NC)was prepared through a strategy of coordination construction-cation exchange-pyrolysis and used as a highly efficient bifunctional oxygen electrocatalyst.Experimental characterizations and density functional theory calculations reveal the formation of Co/CoFe heterostructure and synergistic effect between metal layer and NC support,leading to improved electric conductivity,accelerated reaction kinetics,and optimized adsorption energy for intermediates of ORR and OER.The Co/CoFe@NC exhibits high bifunctional activities with a remarkably small potential gap of 0.70 V between the half-wave potential(E_(1/2))of ORR and the potential at 10 mA cm^(-2)(E_(j=10))of OER.The aqueous ZAB constructed using this air electrode exhibits a slight voltage loss of only 60 mV after 550-cycle test(360 h,15 days).A sodium polyacrylate(PANa)-based hydrogel electrolyte was synthesized with strong water-retention capability and high ionic conductivity.The quasi-solid-state ZAB by integrating the Co/CoFe@NC air electrode and PANa hydrogel electrolyte demonstrates excellent mechanical stability and cyclability under different bending states.
基金financially supported by the Natural Science Foundation of Liaoning Province(Grant No.2019-ZD-0304)the Educational Department of Liaoning Province(Grant No.LJ2019009)+1 种基金Liaoning BaiQianWan Talents Program,Doctoral Start-up Foundation of Liaoning Province(Grant No.20170520231)the open fund of the State Key Laboratory of Molecular Reaction Dynamics in Dalian Institute of Chemical Physics(Grant No.SKLMRDK202001),Chinese Academy of Sciences。
文摘The rational fabrication of heterostructures is one of efficient strategies for improving photocatalytic performance of semiconductor photocatalysts.Very recently,Domen and co-workers found that Ta_(3)N_(5) single crystals grown on the surface of KTaO_(3) can accomplish photocatalytic overall water splitting for the first time.In order to comprehend the underlying mechanism of this photocatalytic system,we have performed a systematic study based on density functional theory first-principles calculations.Ta_(3)N_(5)(010)/KTaO_(3)(110)slab models have been built according to experimental observations by considering two common terminations of KTaO_(3)(110)surface,named as Ta_(3)N_(5)/O_(2) and Ta_(3)N_(5)/KTaO.The formations of interfacial bonds are thermodynamically stable,showing a covalent interaction between two components of a heterostructure.Ta_(3)N_(5)/O_(2) has a higher mobility of photogenerated charge carriers and lower recombination rate of charge carriers than Ta_(3)N_(5)/KTaO.The light absorption of heterostructures displays the feature of KTaO_(3) in the short wavelength region and the characteristic of Ta_(3)N_(5) in the long wavelength region.The calculated band offsets show that Ta_(3)N_(5)/O_(2) and Ta_(3)N_(5)/KTaO have distinct Type-II band alignments,with Ta_(3)N_(5) as the accumulator of photoinduced electrons in the former and the collector of photogenerated holes in the latter,respectively.The difference in charge density and electrostatic potential between two components acts as a driving force to promote the transfer of electrons and holes to different domains of the interface,which is beneficial to extend the lifetime of photoinduced carriers.Our results demonstrate that the function of Ta_(3)N_(5) in Ta_(3)N_(5)/KTaO_(3) photocatalytic system is determined by the termination property of KTaO_(3)(110)surface,which provides a likely reason of the observed photocatalytic activity of overall water splitting achieved by Ta_(3)N_(5) synthesized by using KTaO_(3) as a precursor for the nitridation reaction.
基金Funded by National Key Research and Development Program of China(No.2017YFB0310400)the National Natural Science Foundation of China(Nos.51872217,51932006,51972246 and 51521001)+3 种基金Fundamental Research Funds for the Central Universities in ChinaState Key Laboratory of Advanced Electromagnetic Engineering and Technology(Huazhong University of Science and Technology),the Joint Fund(No.6141A02022255)the Major Program of the Specialized Technological Innovation of HuBei Province,China(No.2019AFA176)the“111”Project(No.B13035)。
文摘We used density functional theory(DFT)calculations to study the influence of alkali earth metal element(AE)doping on the crystal structure and electronic band structure ofα-Si3N4.The diversity of atomic radii of alkaline earth metal elements results in structural expansion when they were doped into theα-Si3N4 lattice.Formation energies of the doped structures indicate that dopants prefer to occupy the interstitial site under the nitrogen-deficient environment,while substitute Si under the nitrogen-rich environment,which provides a guide to synthesizingα-Si3N4 with different doping types by controlling nitrogen conditions.For electronic structures,energy levels of the dopants appear in the bottom of the conduction band or the top of the valence band or the forbidden band,which reduces the bandgap ofα-Si3N4.
基金the China Scholarship Council for financial supportthe funding by the Leverhulme Trust(RPG2019-122)+4 种基金the ACT program(Accelerating CCS Technologies,Horizon2020 Project No.294766),which funded the FUNMIN projectFinancial contributions were made from Department for Business,Energy&Industrial Strategy(BEIS)together with extra funding from NERC and EPSRC research councils,United Kingdom,ADEME(FR),MINECO-AEI(ES)partially funded by EPSRC(EP/P020194/1)funded by EPSRC(EP/L000202)supported by QMUL Research-IT。
文摘Diatomic catalysts(DACs)with two adjacent metal atoms supported on graphene can offer diverse functionalities,overcoming the inherent limitations of single atom catalysts(SACs).In this study,density functional theory calculations were conducted to investigate the reactivity of the carbon dioxide(CO_(2))reduction reaction(CO_(2)RR)on metal sites of both DACs and SACs,as well as their synergistic effects on activity and selectivity.Calculation of the Gibbs free energies of CO_(2)RR and associated values of the limiting potentials to generate C_(1) products showed that Cu acts as a promoter rather than an active catalytic centre in the catalytic CO_(2)conversion on heteronuclear DACs(CuN_(4)-MN_(4)),improving the catalytic activity on the other metal compared to the related SAC MN_(4).Cu enhances the initial reduction of CO_(2)by promoting orbital hybridization between the key intermediate*COOH 2p-orbitals and the metals 3d-orbitals around the Fermi level.This degree of hybridization in the DACs CuN_(4)-MN_(4) decreases from Fe to Co,Ni,and Zn.Our work demonstrates how Cu regulates the CO_(2)RR performance of heteronuclear DACs,offering an effective approach to designing practical,stable,and high-performing diatomic catalysts for CO_(2)electroreduction.
基金supported by the BJAST High-level Innovation Team Program (No.BGS202001)the Beijing Postdoctoral Research Foundation (No.2022-ZZ-046)+3 种基金the National Natural and Science Foundation of China (No.51972026)the Japan Society for the Promotion of Science (JSPS)Grant-in-Aid for the Scientific Research (KAKENHI,Nos.16H06439 and 20H00297)the Dynamic Alliance for Open Innovations Bridging Human,Environment and Materials,the Cooperative Research Program of“Network Joint Research Center for Materials and Devices.”the scholarship granted to a visiting Ph.D.student of the Inter-University Exchange Project by the China Scholarship Council (CSC,No.201906460113)。
文摘The synthesis of oxygen vacancies(OVs)-modified TiO_(2)under mild conditions is attractive.In this work,OVs were easily introduced in TiO_(2)lattice during the hydrothermal doping process of trivalent iron ions.Theoretical calculations based on a novel charge-compensation structure model were employed with experimental methods to reveal the intrinsic photocatalytic mechanism of Fe-doped TiO_(2)(Fe-TiO_(2)).The OVs formation energy in Fe-TiO_(2)(1.12 eV)was only 23.6%of that in TiO_(2)(4.74 eV),explaining why Fe^(3+)doping could introduce OVs in the TiO_(2)lattice.The calculation results also indicated that impurity states introduced by Fe^(3+)and OVs enhanced the light absorption activity of TiO_(2).Additionally,charge carrier transport was investigated through the carrier lifetime and relative mass.The carrier lifetime of Fe-TiO_(2)(4.00,4.10,and 3.34 ns for 1at%,2at%,and 3at%doping contents,respectively)was longer than that of undoped TiO_(2)(3.22 ns),indicating that Fe^(3+) and OVs could promote charge carrier separation,which can be attributed to the larger relative effective mass of electrons and holes.Herein,Fe-TiO_(2)has higher photocatalytic indoor NO removal activity compared with other photocatalysts because it has strong light absorption activity and high carrier separation efficiency.
文摘The plane wave pseudo-potential method was used to investigate the structural, electronic, and elastic properties of Cd Se_(1-x)Te_x in the zinc blende phase. It is observed that the electronic properties are improved considerably by using LDA + U as compared to the LDA approach. The calculated lattice constants and bulk moduli are also comparable to the experimental results. The cohesive energies for pure Cd Se and Cd Te binary and their mixed alloys are calculated. The second-order elastic constants are also calculated by the Lagrangian theory of elasticity. The elastic properties show that the studied material has a ductile nature.
基金Yunnan Expert Workstation,Grant/Award Number:202005AF150028Program for the Outstanding Young Talents of Hebei Province,China,Grant/Award Number:YGZ+6 种基金Guangdong Innovative and Entrepreneurial Team Program,Grant/Award Number:2016ZT06C517Guangdong Science and Technology Department,Grant/Award Number:2020B0909030004National Natural Science Foundation of China,Grant/Award Numbers:21601136,22075211,52071125Outstanding Youth Project of Guangdong Natural Science Foundation,Grant/Award Number:2021B1515020051Natural Science Foundation of Hebei Province,China,Grant/Award Numbers:B2020202052,B2021202028,E2020202071Chunhui Project of Ministry of Education of the People's Republic of China,Grant/Award Number:Z2017010Science and Technology Program of Guangzhou,Grant/Award Number:2019050001。
文摘Due to low cost,high capacity,and high energy density,lithium–sulfur(Li–S)batteries have attracted much attention;however,their cycling performance was largely limited by the poor redox kinetics and low sulfur utilization.Herein,predicted by density functional theory calculations,single‐atomic Co‐B2N2 site‐imbedded boron and nitrogen co‐doped carbon nanotubes(SA‐Co/BNC)were designed to accomplish high sulfur loading,fast kinetic,and long service period Li–S batteries.Experiments proved that Co‐B2N2 atomic sites can effectively catalyze lithium polysulfide conversion.Therefore,the electrodes delivered a specific capacity of 1106 mAh g−1 at 0.2 C after 100 cycles and exhibited an outstanding cycle performance over 1000 cycles at 1 C with a decay rate of 0.032%per cycle.Our study offers a new strategy to couple the combined effect of nanocarriers and single‐atomic catalysts in novel coordination environments for high‐performance Li–S batteries.
基金supported by the GEONJI Research support programsupported by Basic Science Research through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(NRF-2021R1I1A1A01050905)+1 种基金supported by grants from the Medical Research Center Program(NRF-2017R1A5A2015061)through the National Research Foundation(NRF),which is funded by the Korean government(MSIP)supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science,ICT and Future Planning(NRF-2020R1A2B5B01001458)。
文摘Scaled-up industrial water electrolysis equipment that can be used with abundant seawater is key for affordable hydrogen production.The search for highly stable,dynamic,and economical electrocatalysts could have a significant impact on hydrogen commercialization.Herein,we prepared energy-efficient,scalable,and engineering electronic structure modulated Mn-Ni bimetal oxides(Mn_(0.25)Ni_(0.75)O)through simple hydrothermal followed by calcination method.As-optimized Mn_(0.25)Ni_(0.75)O displayed enhanced oxygen and hydrogen evolution reaction(OER and HER)performance with overpotentials of 266 and115 mV at current densities of 10 mA cm^(-2)in alkaline KOH added seawater electrolyte solution.Additionally,Mn-Ni oxide catalytic benefits were attributed to the calculated electronic configurations and Gibbs free energy for OER,and HER values were estimated using first principles calculations.In real-time practical application,we mimicked industrial operating conditions with modified seawater electrolysis using Mn_(0.25)Ni_(0.75)O‖Mn_(0.25)Ni_(0.75)O under various temperature conditions,which performs superior to the commercial IrO_(2)‖Pt-C couple.These findings demonstrate an inexpensive and facile technique for feasible large-scale hydrogen production.
基金partially supported by the Major Program of the National Natural Science Foundation of China (No.22090034)the Haihe Laboratory of Sustainable Chemical Transformations for financial support (CYZC202108)
文摘A sol-gel tandem with a solid-phase modification procedure was developed to synthesize Li_(2)TiO_(3)-doped LiCoO_(2) together with phosphate coatings(denoted as LCO-Ti/P),which possesses excellent high-voltage performance in the range of 3.0-4.6 V.The characterizations of X-ray diffraction,high-resolution transmission electron microscopy,and X-ray photoelectron spectroscopy illustrated that the modified sample LCO-Ti/P had the dopant of monoclinic Li_(2)TiO_(3) and amorphous Li3PO4 coating layers.LCO-Ti/P has an initial discharge capacity of 211.6 mAh/g at 0.1 C and a retention of 85.7%after 100 cycles at 1 C and 25±1°C between 3.0 and 4.6 V.Nyquist plots reflect that the charge transfer resistance of LCO-Ti/P after 100 cycles at 1 C is much lower than that of the spent LCO,which benefits Li-ion diffusion.Density functional theory calculations disclose the superior lattice-matching property of major crystal planes for Li_(2)TiO_(3) and LiCoO_(2),the lower energy barriers for Li-ion diffusion in Li_(2)TiO_(3),and the suppressed oxygen release performance resulting from phosphate adsorption.This work provides useful guidance on the rational design of the high-voltage performance of modified LiCoO_(2) materials in terms of lattice-matching properties aside from the phosphate coating to reduce the energy barriers of Li-ion diffusion and enhance cycling stability.
基金supported by the National Research Foundation of Korea(NRF)funded by Ministry of Science and ICT(Nos.NRF-2019M3E6A1103984 and NRF-2019M3D1A1079214)。
文摘The role of additional ternary alloying elements on the performance of stationary TiFe-based hydrogen storage alloys was investigated based on first-principles density functional theory calculations.As a basic step for examinations,the site preference of each alloying element in the stoichiometric and nonstoichiometric B2TiFe compounds was clarified considering possible antisite defects.Based on the revealed site preference,the effect of various possible ternary elements on the hydrogen storage was examined by focusing on the formation enthalpies of TiFeH and TiFeH_(2) hydrides,which were closely related to the change in the location of plateaus in the pressure-composition-temperature curve.Several physical properties such as the volume expansion due to hydride formation were also examined to provide additional criteria for selecting optimum alloying conditions in future alloying design processes.Candidate alloying elements that maximize the grain boundary embrittlement due to the solute segregation were proposed for the enhanced initial activation of TiFe-based hydrogen storage alloys.