Objective:To assess the biomechanical properties of a new design configuration for zirconia dental implants. Methods: The new design has a cylindrical shape that is partially hollow and porous in the bottom, which per...Objective:To assess the biomechanical properties of a new design configuration for zirconia dental implants. Methods: The new design has a cylindrical shape that is partially hollow and porous in the bottom, which permits the implants to be locked into the alveolar bone over time. It also utilizes bioactive glass coatings to increase adhesion to surrounding bone structure. Samples of the new design were fabricated in the laboratory and their material strength, hardness, and fracture toughness were evaluated. In addition, biocompatibility of the new design was evaluated through testing in dogs. Results: Results of mechanical tests indicate that structural properties of the new design exceed the usual requirements for implants. Moreover, animal tests suggest that there is appreciable improvement in lock-in strength and osteointegration. Conclusion: The new design configuration is biomechanically feasible and further research is warranted to improve the design for human use.展开更多
The novel dental ceramics can be fabricated at lower temperatures when sol-gel derived lithium disilicate glass ceramics(LDGC)was used as an additive for yttria stabilized tetragonal zirconia polycrystalline(Y-TZP)cer...The novel dental ceramics can be fabricated at lower temperatures when sol-gel derived lithium disilicate glass ceramics(LDGC)was used as an additive for yttria stabilized tetragonal zirconia polycrystalline(Y-TZP)ceramics.The effect of LDGC on the sintering,mechanical,and translucent properties of Y-TZP ceramics was investigated in the present study.The results showed that the LDGC additive effectively improved the densification of Y-TZP at 1100℃,which was much lower than the sintering temperature for pure Y-TZP.When sintered at 1100℃,the Y-TZP with 1 wt%LDGC reached a relative density of 95.45%,and prossessed a flexural strength of 482.4 MPa and a fracture toughness of 5.94 MPa-m12.Moreover,its translucency was also improved.While,the addition of LDGC could result in an escape of yttrium atoms from the grain lattice of zirconia,which induced the tetragonal-monoclinic transformation of zirconia and abnormal growth of monoclinic grains.The escaped yttrium atoms diffused into the intergranular glass phase.The results indicated that the novel Y-TZP-LDGC ceramics has a great potential to be used for all-ceramic restorations.展开更多
文摘Objective:To assess the biomechanical properties of a new design configuration for zirconia dental implants. Methods: The new design has a cylindrical shape that is partially hollow and porous in the bottom, which permits the implants to be locked into the alveolar bone over time. It also utilizes bioactive glass coatings to increase adhesion to surrounding bone structure. Samples of the new design were fabricated in the laboratory and their material strength, hardness, and fracture toughness were evaluated. In addition, biocompatibility of the new design was evaluated through testing in dogs. Results: Results of mechanical tests indicate that structural properties of the new design exceed the usual requirements for implants. Moreover, animal tests suggest that there is appreciable improvement in lock-in strength and osteointegration. Conclusion: The new design configuration is biomechanically feasible and further research is warranted to improve the design for human use.
基金supported by the Shanghai Committee of Science and Technology,China(No.17441904100).
文摘The novel dental ceramics can be fabricated at lower temperatures when sol-gel derived lithium disilicate glass ceramics(LDGC)was used as an additive for yttria stabilized tetragonal zirconia polycrystalline(Y-TZP)ceramics.The effect of LDGC on the sintering,mechanical,and translucent properties of Y-TZP ceramics was investigated in the present study.The results showed that the LDGC additive effectively improved the densification of Y-TZP at 1100℃,which was much lower than the sintering temperature for pure Y-TZP.When sintered at 1100℃,the Y-TZP with 1 wt%LDGC reached a relative density of 95.45%,and prossessed a flexural strength of 482.4 MPa and a fracture toughness of 5.94 MPa-m12.Moreover,its translucency was also improved.While,the addition of LDGC could result in an escape of yttrium atoms from the grain lattice of zirconia,which induced the tetragonal-monoclinic transformation of zirconia and abnormal growth of monoclinic grains.The escaped yttrium atoms diffused into the intergranular glass phase.The results indicated that the novel Y-TZP-LDGC ceramics has a great potential to be used for all-ceramic restorations.
