An Alternative Method for Incorporating Fiber Meshes in Complete Upper Dentures

The most commonly used material for constructing complete dentures is polymethyl methacrylate (PMMA). However, the strength characteristics of PMMA, such as impact strength and fatigue strength, are poor, and fracturing of PMMA dentures is a common problem in prosthodontic practice. Reinforcing PMMA with various materials, such as carbon fibers, glass fibers (fiberglass), and ultrahigh modulus polyethylene fibers, has been suggested to strengthen the denture-base material. A common problem encountered when packing the resin on these specimens is fiber slippage beyond the denture edges. The present study proposes an alternative method of incorporating fiber meshes into complete dentures, whereby a thin filament of self-polymerizing resin at the perimeter of the fiber mesh is produced, giving a clear and stable shape to the mesh that fits the upper jaw cast. During placement of the shaped mesh on the cast, a positive-negative relationship is created between the mesh and cast, which immobilizes the mesh during the incorporation process.

Swallowing threshold parameters of subjects with complete dentures and overdentures

Aim: To compare the chewing process and swallowing threshold parameters of subjects with complete dentures and overdentures with data obtained from subjects with complete natural dentitions. Metho-dology: The chewing process in terms of swallowing threshold parameters of four groups of subjects with complete dentures (all females) was quantified by sieving particles after chewing of an artificial test ‘food’ and compared with that of subjects with com-plete natural dentitions as a reference group (33 sub-jects). All subjects (except those of the reference group) had a complete denture in the upper jaw. Regarding the lower jaw two groups with complete dentures (with high (24 subjects), respectively low mandible (12 subjects)) and two groups with overdentures (implant-retained (22 subjects), respectively natural root supported (19 subjects)) were composed. Results: The ‘overdenture-implants’ group needed significantly more chewing cycles and time (mean: 45 cycles in 32 seconds) until ‘swallowing’ compared to the group with complete natural dentitions (mean: 26 cycles in 19 seconds until ‘swallowing’). Also the ‘complete denture-low mandible’ group needed sig-nificantly more cycles and time (mean: 52 cycles in 44 seconds) until ‘swallowing’ than the complete dentition group. In the ‘overdenture-natural roots’ group these outcomes (33 cycles in 24 seconds) were not significantly different compared with the complete dentition group. The ‘complete denture-high mandi-ble’ group (32 cycles in 26 seconds) needed not sig-nificantly more cycles until ‘swallowing’, however time until ‘swallowing’ was significantly longer com-pared to the complete dentition group. All denture groups had significantly larger mean particle sizes when ‘swallowing’ (sizes in the order of 3 mm) than the natural dentition group (about 2 mm). Conclusion: Despite efforts to compensate for a reduced chewing efficiency, subjects with complete dentures (including overdentures) had 50% larger median particle sizes when ‘swallowing’ compared to subjects with complete natural dentitions.

Class III Reversion with Immediate Complete Denture and Immediate Implant-Retained Overdenture: Case Report

With the increased life expectancy, complete dentures have been used in the treatment of edentulism progressively. It restores stomatognathic system functions, providing improvements in chewing, aesthetics, and phonetics. The aim was to report an oral rehabilitation of a patient with severe aesthetic and functional impairment, with Angle’s class III malocclusion. The patient sought the extension project of the School of Dentistry of the Federal University of Minas Gerais with aesthetic complaints. After clinical and radiographic evaluation, the proposed planning was immediate complete denture maxilla and immediate implant-retained overdenture in mandible. During clinical evaluation it was observed that the patient was Angle’s III. The rehabilitation was performed as proposed and at the end of the treatment, it was possible to revert the class III occlusal pattern to Angle’s I. The excellent maxillomandibular relationship was achieved, which ensured optimal facial aesthetics and functional condition. It was concluded that the immediate complete dentures and immediate implant-retained overdenture might be beneficial for restoring the aesthetics and function of patients with Angle’s class III malocclusion.

Investigation of the torsional deformation of the complete upper denture: A pilot study

The aim of this research is to clarify whether the midline axis of the complete upper denture (CUD) is the axis of its torsion during loading, apart from the known bending deflection. Furthermore the present study is intended to estimate the influence of the anterior notches on the torsional deformation of the CUD. Using commercial edentulous molds and standardized procedures, six identical CUDs were fabricated with an initial fraenal notch of 5 mm. Two additional notch conditions were produced by deepening the notch to a total depth of 9 mm and by creating an incisal diastema of 7 mm. Five biaxial (also known as “fish bone”) strain gauges were cemented onto the palatal section of the dentures so that their middle axis coincided with the midline axis of the outer surface of the denture. For the denture specimen used in this study, the specific point of torsion was detected 2 cm from the point of contact of the two artificial central incisors. The presence of a deep fraenal notch and the combination of the deep fraenal notch with the presence of an incisal diastema increased the torsion of the CUD to a significant level (P = 0.006 and P = 0.05, respectively). It was shown that the midline can be the CUD’s axis of torsion. Biaxial strain gauges could be a reliable method of measuring the torsional deformation of the CUD.

Estimation of Fatigue Strength of Reinforced Complete Upper Denture Using a Newly Designed Testing Machine: A Laboratory Research Project

In the present study, an aero pneumatic fatigue testing machine for complete dentures was designed, fabricated, and tested for the evaluation of the fatigue life of reinforced complete upper denture (CUD). On completion and testing, it was observed that the machine has the potential of generating reliable number of cyclic data. The machine’s performance was evaluated using test specimens of identical CUDs that were machined in conformity with standard procedures. The fatigue machine compressed the lower dental arch over the upper denture-specimen in centric occlusion, in the same way that the two masticatory muscles pull the lower jaw over the upper jaw during chewing. The incorporation of glass fibres into the CUD using a sandwich technique quadruples the lifespan of the denture (P = 0.004). The low standard deviation, along with the low coefficient of variation (CV) of the group of unreinforced dentures shows the repeatability of the results and the reliability of the machine. The high standard deviation and coefficient of variation of reinforced dentures was expected, since a high variation of results is usually recorded in fibre reinforcement cases. This research confirmed the view that the crack during denture fracture initiates in the anterior palatal area and propagates to the posterior.

The lingualized occlusion of complete denture

This article reviews the literatures dealing with the lingualized occlusion of complete denture including the origin,development and research.Lingualized occlusion is a valuable concept because many advantages of anatomic and nonanatomic occlusions are retained,satisfactory occlusion is easily obtained,balanced occlusion can be accomplished.

How to implement a knowledge graph completeness assessment with the guidance of user requirements

In the context of big data, many large-scale knowledge graphs have emerged to effectively organize the explosive growth of web data on the Internet. To select suitable knowledge graphs for use from many knowledge graphs, quality assessment is particularly important. As an important thing of quality assessment, completeness assessment generally refers to the ratio of the current data volume to the total data volume.When evaluating the completeness of a knowledge graph, it is often necessary to refine the completeness dimension by setting different completeness metrics to produce more complete and understandable evaluation results for the knowledge graph.However, lack of awareness of requirements is the most problematic quality issue. In the actual evaluation process, the existing completeness metrics need to consider the actual application. Therefore, to accurately recommend suitable knowledge graphs to many users, it is particularly important to develop relevant measurement metrics and formulate measurement schemes for completeness. In this paper, we will first clarify the concept of completeness, establish each metric of completeness, and finally design a measurement proposal for the completeness of knowledge graphs.

Classification of knowledge graph completeness measurement techniques

At present,although knowledge graphs have been widely used in various fields such as recommendation systems,question and answer systems,and intelligent search,there are always quality problems such as knowledge omissions and errors.Quality assessment and control,as an important means to ensure the quality of knowledge,can make the applications based on knowledge graphs more complete and more accurate by reasonably assessing the knowledge graphs and fixing and improving the quality problems at the same time.Therefore,as an indispensable part of the knowledge graph construction process,the results of quality assessment and control determine the usefulness of the knowledge graph.Among them,the assessment and enhancement of completeness,as an important part of the assessment and control phase,determine whether the knowledge graph can fully reflect objective phenomena and reveal potential connections among entities.In this paper,we review specific techniques of completeness assessment and classify completeness assessment techniques in terms of closed world assumptions,open world assumptions,and partial completeness assumptions.The purpose of this paper is to further promote the development of knowledge graph quality control and to lay the foundation for subsequent research on the completeness assessment of knowledge graphs by reviewing and classifying completeness assessment techniques.

Complete Convergenceand Complete Moment Convergence for Weighted Sums of ANA Random Variables

In this paper,we investigate the complete convergence and complete moment conver-gence for weighted sums of arrays of rowwise asymptotically negatively associated(ANA)random variables,without assuming identical distribution.The obtained results not only extend those of An and Yuan[1]and Shen et al.[2]to the case of ANA random variables,but also partially improve them.

COMPLETE KAHLER METRICS WITH POSITIVE HOLOMORPHIC SECTIONAL CURVATURES ON CERTAIN LINE BUNDLES(RELATED TO A COHOMOGENEITY ONE POINT OF VIEW ON A YAU CONJECTURE)

In this article,we study Kahler metrics on a certain line bundle over some compact Kahler manifolds to find complete Kahler metrics with positive holomorphic sectional(or bisectional)curvatures.Thus,we apply a strategy to a famous Yau conjecture with a co-homogeneity one geometry.

The Evaluation of the Dietary Habits Influence on the Microhardness of Gingiva-Coloured Composite and Acrylic Denture Base Materials

Purpose: The study investigated the impact of dietary habits, specifically soda, milk kefir, water kefir, almond milk, and distilled water (control) consumption, on the microhardness of gingiva-coloured composite and acrylic denture bases. Methods: Materials included gingiva-coloured composite (Fusion Universal G1), acrylic (Imicryl), and subdivided Procryla group. Subgroups comprised 15 and 30-minute heat polymerized (Pro15, Pro30), and 1 wt% (Pro1Z) and 3 wt% (Pro3Z) zirconium added groups. Immersed in beverages for 1, 7, and 14 days, pH and microhardness were assessed. SEM examined random samples. Statistical analysis used repeated measures ANOVA, and post hoc tests (p Results: The gingiva-coloured composites displayed noteworthy time-associated microhardness changes (p 0.05). Despite variable pH levels in beverages, no substantial group interaction effects were observed (p > 0.05). Initial microhardness rankings shifted after a 14-day immersion. Conclusions: Gingiva-coloured composite exhibited the highest microhardness pre- and post-immersion, followed by Procryla30 and Imicryl groups. .

Regenerative medicine strategies for chronic complete spinal cord injury

Spinal cord injury is a condition in which the parenchyma of the spinal cord is damaged by trauma or various diseases.While rapid progress has been made in regenerative medicine for spinal cord injury that was previously untreatable,most research in this field has focused on the early phase of incomplete injury.However,the majority of patients have chronic severe injuries;therefore,treatments for these situations are of fundamental importance.The reason why the treatment of complete spinal cord injury has not been studied is that,unlike in the early stage of incomplete spinal cord injury,there are various inhibitors of neural regeneration.Thus,we assumed that it is difficult to address all conditions with a single treatment in chronic complete spinal cord injury and that a combination of several treatments is essential to target severe pathologies.First,we established a combination therapy of cell transplantation and drug-releasing scaffolds,which contributes to functional recovery after chronic complete transection spinal cord injury,but we found that functional recovery was limited and still needs further investigation.Here,for the further development of the treatment of chronic complete spinal cord injury,we review the necessary approaches to the different pathologies based on our findings and the many studies that have been accumulated to date and discuss,with reference to the literature,which combination of treatments is most effective in achieving functional recovery.

Complete Hydatidiform Mole at Menopause: A Case Report from Panzi Hospital, Bukavu, Democratic Republic of Congo

Gestational trophoblastic disease is an abnormal proliferation of trophoblastic tissue during pregnancy. It occurs in women of childbearing age, although a few cases have also been observed in post-menopausal women, although it is extremely rare in the latter. Here we describe a rare case of complete hydatidiform mole in a 56-year-old female patient who presented with genital bleeding combined with nausea and vomiting and a gravid uterus 16 cm in height. The ultrasound findings and the increase in serum β-HCG to 182566.00 mIU/ml suggested a diagnosis of complete hydatidiform mole. Given the post-menopausal state and the future risk of post-molar gestational trophoblastic neoplasia, we opted for total hysterectomy without preservation of the adnexa via a transabdominal approach, followed by antimitotic treatment with methotrexate. The uterus measured 18.45 cm × 11.18 cm with intra cavitary vesicles. Microscopic examination showed chorionic villi of variable size and shape, most of which were dilated and oedematous, associated with trophoblastic cell proliferation and haemorrhage suggestive of complete benign hydatidiform mole. Follow-up showed a consistent decrease in serum β-HCG levels and no evidence of residual disease. A suspicion of gestational trophoblastic disease should be borne in mind when evaluating a patient with peri- or post-menopausal bleeding to avoid delay in diagnosis and treatment.

A coupled strain softening and hardening model for completely weathered granite in a fault zone

his study focused on exploring the specificity of mechanical behavior for completely weathered granite,as a special soil,by consolidated drained triaxial tests.The influences of dry density(1.60,1.70,1.80 and 1.90 g/cm^(3)),confining pressure(100,200,400 and 600 kPa),and moisture content(13.0%,that is,natural moisture content)were investigated in the present work.A newly developed Duncan-Chang model was established based on the experimental data and Duncan-Chang model.The influence of each parameter on the type of the proposed model curve was also evaluated.The experimental results revealed that with varying dry density and confining pressure,the deviatoric stress–strain curves have diversified characteristics including strain-softening,strain-stabilization and strain-hardening.Under high confining pressure condition,specimens with different densities all showed strain-hardening characteristic.Whereas at the low confining pressure levels,specimens with higher densities gradually transform into softening characteristics.Except for individual compression shear failure,the deformation modes of the specimens all showed swelling deformation,and all the damaged specimens maintained good integrity.Through comparing the experiment results,the strain-softening or strain-hardening behavior of CWG specimens could be predicted following the proposed model with high accuracy.Additionally,the proposed model can accurately characterize the key mechanical indicators,such as tangent modulus,peak value and residual strength,which is simple to implement and depends on fewer parameters.

Correlation and predictive value of pathological complete response and ultrasound characteristic parameters in neoadjuvant chemotherapy for breast

BACKGROUND Breast cancer ranks as one of the most prevalent malignant tumors among women,significantly endangering their health and lives.While radical surgery has been a pivotal method for halting disease progression,it alone is insufficient for enhancing the quality of life for patients.AIM To investigate the correlation between ultrasound characteristic parameters of breast cancer lesions and clinical efficacy in patients undergoing neoadjuvant chemotherapy(NAC).METHODS Employing a case-control study design,this research involved 178 breast cancer patients treated with NAC at our hospital from July 2019 to June 2022.According to the Miller-Payne grading system,the pathological response,i.e.efficacy,of the NAC in the initial breast lesion after NAC was evaluated.Of these,59 patients achieved a pathological complete response(PCR),while 119 did not(non-PCR group).Ultrasound characteristics prior to NAC were compared between these groups,and the association of various factors with NAC efficacy was analyzed using univariate and multivariate approaches.RESULTS In the PCR group,the incidence of posterior echo attenuation,lesion diameter≥2.0 cm,and Alder blood flow grade≥II were significantly lower compared to the non-PCR group(P<0.05).The area under the curve values for predicting NAC efficacy using posterior echo attenuation,lesion diameter,and Alder grade were 0.604,0.603,and 0.583,respectively.Also,rates of pathological stage II,lymph node metastasis,vascular invasion,and positive Ki-67 expression were significantly lower in the PCR group(P<0.05).Logistic regression analysis identified posterior echo attenuation,lesion diameter≥2.0 cm,Alder blood flow grade≥II,pathological stage III,vascular invasion,and positive Ki-67 expression as independent predictors of poor response to NAC in breast cancer patients(P<0.05).CONCLUSION While ultrasound characteristics such as posterior echo attenuation,lesion diameter≥2.0 cm,and Alder blood flow grade≥II exhibit limited predictive value for NAC efficacy,they are significantly associated with poor response to NAC in breast cancer patients.

Robotic complete mesocolic excision for right colon cancer:Learning curve,training,techniques,approach,platforms,and future perspectives

Colon cancer has the fifth highest incidence worldwide and has the sixth highest mortality.Compared with rectal cancer,colon cancer currently has the worst 5-year overall survival for patients with stage Ⅱ and Ⅲ disease.Complete mesocolic excision has been developed as a standardized and optimized surgical technique for the excision of colon cancers.This technique has traditionally been performed through an open approach since laparoscopy is generally considered technically challenging.The robotic approach has been slowly implemented for colon cancer,but the newest robotic platforms allow for a safer and optimized approach for right colon cancer.Several robotic approaches have been developed and explored.The expansion of the current robotic platform ecosystem is gradually providing new outputs in the application of the robotic approach to complete mesocolic excision.This review gains an oversight of existing literature on robotic complete mesocolic excision for right colon cancer(learning curve,training,techniques,approach,platforms,and future perspectives).

Distributed collaborative complete coverage path planning based on hybrid strategy

Collaborative coverage path planning(CCPP) refers to obtaining the shortest paths passing over all places except obstacles in a certain area or space. A multi-unmanned aerial vehicle(UAV) collaborative CCPP algorithm is proposed for the urban rescue search or military search in outdoor environment.Due to flexible control of small UAVs, it can be considered that all UAVs fly at the same altitude, that is, they perform search tasks on a two-dimensional plane. Based on the agents’ motion characteristics and environmental information, a mathematical model of CCPP problem is established. The minimum time for UAVs to complete the CCPP is the objective function, and complete coverage constraint, no-fly constraint, collision avoidance constraint, and communication constraint are considered. Four motion strategies and two communication strategies are designed. Then a distributed CCPP algorithm is designed based on hybrid strategies. Simulation results compared with patternbased genetic algorithm(PBGA) and random search method show that the proposed method has stronger real-time performance and better scalability and can complete the complete CCPP task more efficiently and stably.

Diagnostic significance of complete blood cell count and hemogramderived markers for neonatal sepsis at Southwest Public Hospitals,Ethiopia

BACKGROUND Neonatal sepsis is defined as an infection-related condition characterized by signs and symptoms of bacteremia within the first month of life.It is the leading cause of mortality and morbidity among newborns.While several studies have been conducted in other parts of world to assess the usefulness of complete blood count parameters and hemogram-derived markers as early screening tools for neonatal sepsis,the associations between sepsis and its complications with these blood parameters are still being investigated in our setting and are not yet part of routine practice.AIM To evaluate the diagnostic significance of complete blood cell count hemogramderived novel markers for neonatal sepsis among neonates attending public hospitals in the southwest region of Oromia,Ethiopia,through a case control study.METHODS A case control study was conducted from October 2021 to October 2023 Sociodemographic,clinical history,and laboratory test results data were collected using structured questionnaires.The collected data were entered into Epi-data 3.1 version and exported to SPSS-25 for analysis.Chi-square,independent sample ttest,and receiver operator characteristics curve of curve were used for analysis.A P-value of less than 0.05 was considered statistically significant.RESULTS In this study,significant increases were observed in the following values in the case group compared to the control group:In white blood cell(WBC)count,neutrophils,monocyte,mean platelet volume(MPV),neutrophils to lymphocyte ratio,monocyte to lymphocyte ratio(MLR),red blood cell width to platelet count ratio(RPR),red blood width coefficient variation,MPV to RPR,and platelet to lymphocyte ratio.Regarding MLR,a cut-off value of≥0.26 was found,with a sensitivity of 68%,a specificity of 95%,a positive predictive value(PPV)of 93.2%,and a negative predictive value(NPV)of 74.8%.The area under the curve(AUC)was 0.828(P<0.001).For WBC,a cutoff value of≥11.42 was identified,with a sensitivity of 55%,a specificity of 89%,a PPV of 83.3%,and a NPV of 66.4%.The AUC was 0.81(P<0.001).Neutrophils had a sensitivity of 67%,a specificity of 81%,a PPV of 77.9%,and a NPV of 71.1%.The AUC was 0.801,with a cut-off value of≥6.76(P=0.001).These results indicate that they were excellent predictors of neonatal sepsis diagnosis.CONCLUSION The findings of our study suggest that certain hematological parameters and hemogram-derived markers may have a potential role in the diagnosis of neonatal sepsis.

Prediction of pathological complete response and prognosis in locally advanced rectal cancer

BACKGROUND Colorectal cancer is currently the third most common malignant tumor and the second leading cause of cancer-related death worldwide.Neoadjuvant chemoradiotherapy(nCRT)is standard for locally advanced rectal cancer(LARC).Except for pathological examination after resection,it is not known exactly whether LARC patients have achieved pathological complete response(pCR)before surgery.To date,there are no clear clinical indicators that can predict the efficacy of nCRT and patient outcomes.AIM To investigate the indicators that can predict pCR and long-term outcomes following nCRT in patients with LARC.METHODS Clinical data of 128 LARC patients admitted to our hospital between September 2013 and November 2022 were retrospectively analyzed.Patients were categorized into pCR and non-pCR groups.Univariate analysis(using the χ^(2) test or Fisher’s exact test)and logistic multivariate regression analysis were used to study clinical predictors affecting pCR.The 5-year disease-free survival(DFS)and overall survival(OS)rates were calculated using Kaplan-Meier analysis,and differences in survival curves were assessed with the log-rank test.RESULTS Univariate analysis showed that pretreatment carcinoembryonic antigen(CEA)level,lymphocyte-monocyte ratio(LMR),time interval between neoadjuvant therapy completion and total mesorectal excision,and tumor size were correlated with pCR.Multivariate results showed that CEA≤5 ng/mL(P=0.039),LMR>2.73(P=0.023),and time interval>10 wk(P=0.039)were independent predictors for pCR.Survival analysis demonstrated that patients in the pCR group had significantly higher 5-year DFS rates(94.7%vs 59.7%,P=0.002)and 5-year OS rates(95.8%vs 80.1%,P=0.019)compared to the non-pCR group.Tumor deposits(TDs)were significantly correlated with shorter DFS(P=0.002)and OS(P<0.001).CONCLUSION Pretreatment CEA,LMR,and time interval contribute to predicting nCRT efficacy in LARC patients.Achieving pCR demonstrates longer DFS and OS.TDs correlate with poor prognosis.

Unconfined compressive strength and failure behaviour of completely weathered granite from a fault zone

Understanding the strength characteristics and deformation behaviour of the tunnel surrounding rock in a fault zone is significant for tunnel stability evaluation.In this study,a series of unconfined compression tests were conducted to investigate the mechanical characteristics and failure behaviour of completely weathered granite(CWG)from a fault zone,considering with height-diameter(h/d)ratio,dry densities(ρd)and moisture contents(ω).Based on the experimental results,a regression mathematical model of unconfined compressive strength(UCS)for CWG was developed using the Multiple Nonlinear Regression method(MNLR).The research results indicated that the UCS of the specimen with a h/d ratio of 0.6 decreased with the increase ofω.When the h/d ratio increased to 1.0,the UCS increasedωwith up to 10.5%and then decreased.Increasingρd is conducive to the improvement of the UCS at anyω.The deformation and rupture process as well as final failure modes of the specimen are controlled by h/d ratio,ρd andω,and the h/d ratio is the dominant factor affecting the final failure mode,followed byωandρd.The specimens with different h/d ratio exhibited completely different fracture mode,i.e.,typical splitting failure(h/d=0.6)and shear failure(h/d=1.0).By comparing the experimental results,this regression model for predicting UCS is accurate and reliable,and the h/d ratio is the dominant factor affecting the UCS of CWG,followed byρd and thenω.These findings provide important references for maintenance of the tunnel crossing other fault fractured zones,especially at low confining pressure or unconfined condition.