New Insights into the Depositional Environments of Ordovician Carbonate Formations in the Yubei Area of Tarim Basin Based on Standard Microfacies Types

Objective The Yubei area is located in the mid-east Maigaiti slope of southwestern Tarim Basin, China, with an exploration history of several years. Recent exploration has preliminarily indicated that the Ordovician carbonate formations in this area have some oil and gas potential. Carbonate microfacies provides material basis for reservoir development, seal formation and hydrocarbon generation. Therefore, this work utilized the standard microfacies （SMF） types to study the microfacies of the Ordovician formations in the Yubei area in order to provide theoretical basis for the next exploration.

Effects of specific surface area of metallic nickel particles on carbon deposition kinetics

Carbon deposition on nickel powders in methane involves three stages in different reaction temperature ranges. Temperature programing oxidation test and Raman spectrum results indicated the formation of complex and ordered carbon structures at high deposition temperatures. The values of I（D）/I（G） of the deposited carbon reached 1.86, 1.30, and 1.22 in the first, second, and third stages, respectively. The structure of carbon in the second stage was similar to that in the third stage. Carbon deposited in the first stage rarely contained homogeneous pyrolytic deposit layers. A kinetic model was developed to analyze the carbon deposition behavior in the first stage. The rate-determining step of the first stage is supposed to be interfacial reaction. Based on the investigation of carbon deposition kinetics on nickel powders from different resources, carbon deposition rate is suggested to have a linear relation with the square of specific surface area of nickel particles.

Rb-Sr and Sm-Nd Isochron Ages of the Dongmozhazhua and Mohailaheng Pb-Zn Ore Deposits in the Yushu area, southern Qinghai and Their Geological Implications

Located on the northeast margin of the Qiangtang terrane between the Jinshajiang suture zone and Bangonghu-Nujiang suture zone,the Dongmozhazhua and Mohailaheng Pb-Zn deposits in the Yushu area of Qinghai Province are representative Pb-Zn deposits of the Pb-Zn-Cu polymetallic mineralization belt in the northern part of the Nujiang-Lancangjiang-Jinshajiang area,which are in the front belt of the Yushu thrust nappe system.The formed environments of these two deposits are different from those of sediment-hosted base metal deposits elsewhere in the world.The authors hold that they were formed during the Indian-Asian continental collision and developed within the fold-thrust belt combined with thrust and strike-slip-related Cenozoic basins in the interior of the collisional zone.Studying on the metallogenic epochs of these two deposits is helpful to the understanding of ore-forming regularity of the regional Pb-Zn-Cu mineralization belt and also to the search for new deposits in this region.The age of the Dongmozhazhua deposit has been determined by the Rb-Sr isochron method for sphalerite residues,whereas the age of the Mohailaheng deposit has been determined by the Rb-Sr isochron method for sphalerite residues and the Sm-Nd isochron method for fluorite.The age of the Dongmozhazhua deposit is 35.0-±0.0 Ma （（87Sr/86Sr）0=0.708807） for sphalerite residues.The age of the Mohailaheng deposit is 32.2±0.4 Ma （（87Sr/86Sr）o=0.708514） for sphalerite residues and 31.8±0.3 Ma （（143Nd/144Nd）o=0.512362） for fluorite with an average of 32.0 Ma.Together with the regional geological setting during mineralization,a possible tectonic model for metallogeny of the Dongmozhazhua and Mohailaheng Pb-Zn deposits has been established.These two ages are close to the ages of the Pb-Zn deposits in the Lanping and Tuotuohe basins,indicating that it is possible that the narrow 1000-kilometer-long belt controlled by a thrust nappe system on the eastern and northern margins of the Tibetan plateau could be a giant Pb-Zn mineralized belt.

Lead Isotope Studies of Massive Surphur-Iron-Gold Deposits in the Tongling Area, Anhui Province

Pb isotope ratios and their variation have been measured and explained on ores of massive S-Fe-Au depos-its hosted in the Middle-Upper Carboniferous, on feldspars from diorite bodies closely related tomineralization and on whole rocks from ore-hosting strata (carbonate rocks) in the Tongling area, Anhui Prov-ince. Through a comparison of Pb isotope features of these geological bodies, it has been suggested that oresubstances of the deposits were derived from ore-hosting strata. In the meanwhile, the measurement of ore Pbisotopes of different mineralization types of the same deposit indicates that different mineralization types havedistinct Pb isotope characteristics, showing the potentiality of the Pb isotopic method used in mineral explora-tion.

Discovery of Lorandite TlAsS_2 at the Distal Au-Tl Deposit in a Skarn system,Fengshan Area,Middle-Lower Yangtze River,Eastern China

Thallium has been used geochemical exploration of gold deposits. However, as an indicator element in searching for hydrothermal the T1 minerals and mineralization are rare in nature. Lorandite T1AsS2, a relatively uncommon mineral, has been dominantly discovered in some Carlin gold deposits, and minor Sb- Hg, U and Pb-Zn-Ag deposits.

Magmatic Evolution and Mineralization of Porphyry Copper-Gold Deposits in the Duolong Ore Concentration Area, Tibet

The Bangong Lake-Nujiang River metallogenic belt is located between the Qiangtang Block and Lhasa Block, and the Duolong ore concentration area is located in the western section of the Bangong Lake-Nujiang River metallogenic belt. Till now, several large and super large copper-gold deposits, such as Duobuza, Bolong, Dibaonamugang, Naruo and Rongna deposits have been discovered in this area, mainly porphyry copper-gold ones.

Discovery of the World's Second Largest Molybdenum Deposit in the Shapinggou Area,Jinzhai County,Anhui Province

In the year of 2011, a superlarge molybdenum deposit was discovered in the Shapinggou area, Jinzhai county, Anhui Province by the Bureau of Geology and Mineral Exploration of Anhui Province, with its reserve more than 2.2 million ton, just next to the Klimax molybdenum deposit （〉3.3 million ton） in Colorado. It has ranged the world＇s second largest molybdenum deposit, with potential economic value up to 100 billion dollars.

Kaolin Deposits of Weathering-Residual in the Coastal Area of Guangdong Province

Kaolin deposits of weathering-residual type make up a large proportion in different types of kaolin depos-its and are widely used in ceramics, electron ceramics, rubber and paper industries. This paper discusses sys-tematically this type of kaolin deposit with respect to their features of occurrence, mineralogical and chemicalcomposition and transformation of minerals during supergene processes, thus providing some basic data forthe rational exploitation and utilization of the kaolin resources.

World's Third-Largest Molybdenum Deposit Discovered in Caosiyao Area, Xinghe County, Inner Mongolia

On l lth September 2013, the Inner Mongolia Mineral Resources and Reserves Evaluation Center estimated that the world＇s third-largest molybdenum deposit had been found in the Caosiyao area of Xinghe County, Inner Mongolia, NE China. The find has 130235.60×10^4 t of （122b）＋（333） molybdenum ores, a metal amount of 1327649.27 t, with Mo grade of 0.102-a super-large one.

Metallogenic Prediction of the Peripheral Areas of the Xiyi Concealed Lead-Zinc Deposit in Baoshan City, Yunnan Province

The newly-discovered Xiyi lead-zinc deposit is a large deposit located in the north central Baoshan block of the southern Sanjiang metallogenic belt section, Southwest China.The surface of the deposit is mainly covered by eluvial-deluvial lateritic layer, without any mineralized outcrops. The main concealed orebody V3 is buffed in the depth of 300-500m. The orebodies are controlled by certain stratigraphic horizons, and most are cut by strata with a high angle, while a few occur along the strata. The direct wall rocks are calcisiltite, calclithite, bioclastic calcarenite,

Characteristics of the ore forming fluid from the zinc poly-metallic deposit in the Mopan mine area,Guangxi Nandan

Fluid inclusions from samples from the layered and veined mineralized belt in the Mopan mine area were studied using microscopic temperature measurements and laser Raman spectroscopy.Further studies were conducted on the nature and source of the ore forming fluid and on the mechanism of deposit formation.The results show that there are three types of inclusions that occur in both the layered and veined ore body.These are liquid inclusions,CO 2 inclusions with a liquid phase,and NaCl-H 2 O multiphase inclusions.The fluid inclusions in both the layered and veined ore bodies have similar characteristics.The ore forming fluid is strongly reducing,was exposed to low to medium temperatures,salinity,and pressures.The source of this ore forming fluid was a mix of submarine volcanic spring(blow-piping),magmatic hydrothermal jet,and underground water.

DECOLLEMENT STRUCTURE AND METALLOGENIC PROGNOSIS FOR BURIED URANIUM DEPOSITS OF EAST HUNAN AND ITS ADJACENT AREA,CHINA

East Hunan and its adjacent area is defined as an intraplate orogenic zone with help of new theory of geology and multi-discipline research. The evolutionary stages, deep structrue, geological feature, rotation strain and metallogeny of NW-striking transfer fault zone are also discussed. NE-trending strike-slip fault zone, as a whole, entered action during Pacific movement and underwent 3 stages: the strike-slip shear, the pull-apart extension and the’ compressive thrust. The aurthors studied macro-and microscopic features of strike-slip fault and its control of uranium mineralization at Jinguangchung deposit by means of modern structure analysis, micro-submicroscopic investigation and geophysical measurement.

Material manufacturing from atomic layer

Atomic scale engineering of materials and interfaces has become increasingly important in material manufacturing.Atomic layer deposition(ALD)is a technology that can offer many unique properties to achieve atomic-scale material manufacturing controllability.Herein,we discuss this ALD technology for its applications,attributes,technology status and challenges.We envision that the ALD technology will continue making significant contributions to various industries and technologies in the coming years.

Measurement of Metallogenic Depth and Deep Second Enrichment Belt Forecasting in Jiaodong Gold Deposit

The depth is important for ore finding in Jiaodong gold deposit. However, many geologists are still discussing how to confirm the depth for the tectonic and metallogenesis formation. The authors of this paper propose a new method-the correction of metallogenic depth via its structure to calculate the depth. This method, based on the crust rock in a solid stress state, emphasizes the elastic pattern rather than the static fluid pattern. In addition, this method is more appropriate to the actual situation in the crust than the method of weight/special weight. The authors of this paper illustrating, with the Jiaodong gold deposit as an example, the metallogenic depth correction via structure conclude that the depth of the most deposits, lower than 4-6 km, is often 2.5 km. Therefore, the authors suggest that there exists a second enrichment belt and that ore resources are more potential at the belt of Jiaodong area. These results have been demonstrated by years of exploration.

Summary of technology for a comprehensive geophysical exploration of gold mine in North China Craton

The North China Craton is the oldest continental block,and has suffered from large-scale lithospheric thinning and destruction,which in turn led to gold deposits in northern China.The decratonic gold deposits in the North China Craton became the most important gold deposits in China,and geophysical methods are key means to detect and discover gold deposits there.In this paper,based on the geological and petrophysical characteristics of the North China Craton,the geological model of the decratonic gold deposits is transformed into a geophysical model.At present,two methods of geophysical exploration of decratonic gold deposits are in use:rapid and efficient exploration on the scale of the ore concentration area,and large depth exploration on the scale of the deposit area.In detail,the airborne electromagnetic,magnetic and gravity methods are used to detect the shallow(1,500 m)anomaly area on the scale of the ore concentration area.Through the ground-controlled source electromagnetic and ground magnetotelluric methods,explorations for targets at significant depth(5,000 m)are carried out in the mining area.Then,taking the Liaodong ore concentration area as an example,geophysical methods are used to discover two prospecting areas around the Jianshanzi Fault in the Qingchengzi ore concentration area,Baiyun-Xiaotongjiapuzi deep prospecting area,and Qingchengzi deep prospecting area.Next,three prospecting areas are delineated around the Jixingou Fault in the Wulong mining area,Wulong deep prospecting area,Weishagou deep prospecting area,and Chang’an deep prospecting area.The anomalies in the ore concentration area and mining area are revealed by means of three-dimensional exploration methods,thereby providing technical support for the exploration of metal minerals such as decratonic gold deposits.

Mapping Spatial Distribution Characteristics of Lineaments Extracted from Remote Sensing Image Using Fractal and Multifractal Models

Mapping mineral prospectivity in vegetated areas is a challenge. For this reason, we aimed to map spatial distribution characteristics of linear structures detected in remote sensing images using fractal and multifractal models. The selected study area was the Pinghe District of the Fujian Province（China）, located in the Shanghang-Yunxiao polymetallic and alunite ore belt（within the Wuyishan polymetallic belt）, where mineral resources such as copper, molybdenum, gold, silver, iron, lead, zinc, alunite and pyrophyllite have been discovered. The results of our study showed that：（1） the values of fractal dimension for all lineaments, NW-trending lineaments, and NE-trending lineaments, are 1.36, 1.32, and 1.23, respectively, indicating that these lineaments are statistically self-similar;（2） the fractal dimensions of the spatial distribution of the linear structures in the four selected hydrothermal-type ore deposits of the Pinghe District, named Zhongteng, Panchi, Xiaofanshan and Fanshan, are 1.43, 1.52, 1.37 and 1.37, respectively, which are higher than the mean value in South China;（3） the spatial distribution of the linear structures extracted from the remote sensing image and displayed by the contour map of fractal dimensions, correlates well with the known hydrothermal ore deposits; and（4） the results of the anomaly map decomposed by the spectrum-area（S-A） multifractal model is much better than the original fractal dimension contour map, which showed most of the known hydrothermal-type deposits occur in the high anomalous area. It is suggested that a high step tendency possibly matches with the boundary of the volcanic edifice and the deep fault controlling the development of the rock mass and the volcanic edifice. The complexity of the spatial distribution of mapped lineations（faults） in the Pinghe District, characterized by high values in the anomaly map, may be associated with the hydrothermal polymetallic ore mineralization in the study area.

A review on high performance photovoltaic cells and strategies for improving their efficiency

The introduction of a practical solar cell by Bell Laboratory,which had an efficiency of approximately 6%,signified photovoltaic technology as a potentially viable energy source.Continuous efforts have been made to increase power conversion efficiency(PCE).In the present review,the advances made in solar cells(SCs)are summarized.Material and device engineering are described for achieving enhanced light absorption,electrical properties,stability and higher PCE in SCs.The strategies in materials and coating techniques for large area deposition are further elaborated,which is expected to be helpful for realizing high-efficiency SCs.The methods of lightharvesting in SCs via anti-reflecting coatings,surface texturing,patterned growth of nanostructure,and plasmonics are discussed.Moreover,progress in mechanical methods that are used for sun tracking are elaborated.The assistance of the above two protocols in maximizing the power output of SCs are discussed in detail.Finally,further research efforts needed to overcome roadblocks in commercialization were highlighted and perspectives on the future development of this rapidly advancing field are offered.