Depositional Environment and Lithofacies Analyses of Eocene Lacustrine Shale in the Bohai Bay Basin:Insights from Mineralogy and Elemental Geochemistry

The effect of various depositional parameters including paleoclimate,paleosalinity and provenance,on the depositional mechanism of lacustrine shale is very important in reconstructing the depositional environment.The classification of shale lithofacies and the interpretation of shale depositional environment are key features used in shale oil and gas exploration and development activity.The lower 3rd member of the Eocene Shahejie Formation(Es_(3)^(x)shale)was selected for this study,as one of the main prospective intervals for shale oil exploration and development in the intracratonic Bohai Bay Basin.Mineralogically,it is composed of quartz(avg.9.6%),calcite(avg.58.5%),dolomite(avg.7%),pyrite(avg.3.3%)and clay minerals(avg.20%).An advanced methodology(thin-section petrography,total organic carbon and total organic sulfur contents analysis,X-ray diffraction(XRD),X-ray fluorescence(XRF),field-emission scanning electron microscopy(FE-SEM))was adopted to establish shale lithofacies and to interpret the depositional environment in the lacustrine basin.Six different types of lithofacies were recognized,based on mineral composition,total organic carbon(TOC)content and sedimentary structures.Various inorganic geochemical proxies(Rb/Sr,Ca/(Ca+Fe),Ti/Al,Al/Ca,Al/Ti,Zr/Rb)have been used to interpret and screen variations in depositional environmental parameters during the deposition of the Es_(3)^(x)shale.The experimental results indicate that the environment during the deposition of the Es_(3)^(x)shale was warm and humid with heightened salinities,moderate to limited detrital input,higher paleohydrodynamic settings and strong oxygen deficient(reducing)conditions.A comprehensive depositional model of the lacustrine shale was developed.The interpretations deduced from this research work are expected to not only expand the knowledge of shale lithofacies classification for lacustrine fine-grained rocks,but can also offer a theoretical foundation for lacustrine shale oil exploration and development.

Depositional Environment of Sediments in Tonle Sap Sedimentary Basin, Western Part of Cambodia: Insights from Field and Geochemical Studies

Tonle Sap sedimentary basin was considered a favorable geological condition for hydrocarbon accumulation in the onshore Cambodia. Two exposure outcrops in Battambang province, called Somlout and Takream, were selected to represent sediments in this basin. The sedimentology and geochemistry studies provide insights into the depositional environment of sediments using field investigation, lithological, sedimentological, paleontological, and geochemical analysis. The redox condition, water column, and depositional setting were analyzed by plotting the ratio of V vs. Cr, Uauthigenic vs. V/Cr, Sr vs. Ba, Ca vs. (Fe + Ca), and Fe2O3/TiO2 vs. Al2O3/(Al2O3 + Fe2O3) diagram. Moreover, these diagrams can be used to predict depositional conditions as well. Based on the results, Somlout and Takream comprise calcareous shale and limestone facies. The geochemical analysis showed that Somlout calcareous shale samples were deposited in the dysoxic freshwater of the lake setting during the regression, while Somlout limestones and Takream were deposited in high salinity seawater, oxic condition of shallow-marine water. In addition, Somlout limestones consist of fragmental fusulinid foraminifera, bivalve shelve, and bryozoan, which suggest a barrier environment. Meanwhile, Teakream consists of fine-grained calcareous shale, and lime-mudstone, which are presented to form in the quiet marine setting of the lagoon environment. Therefore, the Tonle Sap basin sediments were deposited in the Somlout area’s barrier and lake environment, and the lagoon environment for Takream.

Geochronology and Geochemistry of the Radiolarian Cherts of the Mada'er Area,Southwestern Tianshan:Implications for Depositional Environment

In the southwestern Tianshan,the geologic ages of many strata and their depositional environments are still poorly constrained because of complex structures.The Mada＇er area is located in the Kuokesaleling belt,Southwestern Tianshan.The cherts from the former Wupata＇erkan Group contain abundant radiolarian fossils,including 10 species which are identified as late Devonian to early Carboniferous in age.Eleven chert samples have SiO_2 contents ranging from 88.80 wt%to 93.28 wt%, and 2.02 wt%to 3.72 wt%for Al_2O_3.The SiO_2/Al_2O_3 ratios of all samples vary from 23.84 to 46.11, much lower than those of the pure cherts（80-1400）.These values suggest that the cherts contain high ratios of terrigenous materials.The Al_2O_3/（Al_2O_3＋Fe_2O_3）ratios vary between 0.64 and 0.77,whereas V and Cu concentrations range from 10.92 ppm to 26.7 ppm and from 2.15 ppm to 34.1 ppm respectively. The Ti/V ratios vary from 25.53 to 44.93.The total REE concentrations of the cherts are between 30.78 ppm and 59.26 ppm,averaging 45.46 ppm.The（La/Ce）_N ratios range from 0.81 to 1.12,and 0.88-1.33 for（La/Yb）_N,averaging 1.09,which suggests a continental margin environment.Consequently,it is inferred that the cherts formed in a residual sea environment during the late Devonian to early Carboniferous time,which suggests that the collision between the Karakum-Tarim and Kazakhstan-Junggar plates did not occur at the time.In addition,the regional geological information indicates that the study area experienced a post-collision stage during the early Permian,and thus it is likely that the collision between the two plates took place in the late Carboniferous.

Diagenesis and Diagenetic Evolution of Deltaic and Neritic Gas-Bearing Sandstones in the Lower Mingyuefeng Formation of Paleogene, Lishui Sag, East China Sea Shelf Basin: Implications for Depositional Environments and Sequence Stratigraphy Controls

Gas-bearing deposits in the Lower Mingyuefeng Formation of Paleogene, Lishui Sag, East China Sea Shelf Basin consist of shoreface sandstones of the highstand systems tract（HST） and transgressive systems tract（TST）, and deltaic sandstones of the lowstand systems tract（LST） and falling stage systems tract（FSST）.Detailed petrographic observations suggest that the diagenetic features and related evolution of these deposits cannot be simply characterized and demonstrated in the depth domain.However, the occurrence of diagenetic minerals systematically depends on the studied interval within the HST, TST, LST, and FSST; therefore, diagenesis in this region can be better constrained when studied in the context of the depositional environments and sequence stratigraphic framework.The eogenetic processes in such settings include：（1） microcrystalline siderite precipitated as concretions in almost all environments and systems tracts, which inhibited further mechanical compaction;（2） grain dissolution and kaolinitization occurred in shoreface HST sandstones and deltaic LST and FSST sandstones;（3） glaucony was locally observed, which did not clearly reflect the controls of facies or sequence stratigraphy; and（4） cementation by pyrite aggregates occurred in the shoreface HST sandstones and deltaic LST sandstones.The mesogenetic diagenesis includes：（1） partial conversion of kaolinite into dickite in deltaic LST sandstones, and minor chlorite cementation in deltaic FSST sandstones;（2） transformation of kaolinite into illite and quartz cementation in deltaic LST and FSST sandstones;（3） frequent precipitation of ankerite and ferroan calcite in shoreface TST sandstones and early HST sandstones, forming baffles and barriers for fluid flow, with common calcite in shoreface HST sandstones as a late diagenetic cement; and（4） formation of dawsonite in the deltaic LST and FSST sandstones, which is interpreted to be a product of the invasion of a CO2-rich fluid, and acts as a good indicator of CO2-bearing reservoirs.This study has thus constructed a reliable conceptual model to describe the spatial and temporal distribution of diagenetic alterations.The results may provide an entirely new conceptual framework and methodology for successful gas exploration in the continental margins of offshore China, thus allowing us to predict and unravel the distribution and quality evolution of clastic reservoirs at a more detailed and reliable scale.

Depositional environment in the southern Ulleung Basin,East Sea(Sea of Japan),during the last 48000 years

The present study is based on the sedimentological data from a piston core KCES1 off the southern Ulleung Basin margin,the East Sea（Sea of Japan）.The data include sediment color（L^＊）,X-ray radiographs,grain size distribution and AMS^14C date.Four kinds of sediments（homogeneous,laminated,crudely laminated and hybrid sediments） are identified according to the characters of the sedimentary structures that were considered to reflect changes in bottom-water oxygenation.Alternations of dark laminated/crudely laminated sediments and light homogeneous sediments represent millennial-scale variations that are possibly associated with the high-resolution changes in the East Asian monsoon（EAM）.The relative contributions of the East China Sea Coastal Water（ECSCW） and the Tsushima Warm Current（TWC） were likely the main reasons for the repetition of the anoxic and oxic depositional conditions in the East Sea since the last 48 ka BP.During the interstadial,the strengthen summer EAM was attributed to the expansion of the ECSCW because of more humid climate in central Asia,and then more strongly low-salinity,nutrient-enriched water was introduced into the East Sea.The ventilation of deep water was restricted and therefore the dark laminated layer deposited under the anoxic bottom water condition.During the lowest stand of sea level in the last glacial maximum（LGM）,the isolated East Sea dominated by stratified water masses and the euxinic depositional environment formed.The homogenous sediments have been predominating since 17.5 ka BP indicating that the TWC has intruded into the East Sea gradually with the stepwise rise of sea level and the bottom water oxygen level was high.During the late Younger Dryas（YD） period,the last dark laminated layer deposited because the ventilation of bottom water was restricted by stronger summer EAM.The TWC strengthened and the bottom water became oxic again from 10.5 ka BP.

Microfacies and Depositional Environments of Miocene Isolated Carbonate Platforms from Central Luconia, Offshore Sarawak, Malaysia

The Luconia Province-offshore Sarawak-is a key geological unit for understanding the distribution of hydrocarbon resources in Malaysia. Nevertheless, little effort has been made to address the palaeoenvironmental characteristics of the Tertiary carbonates in the key sector of Central Luconia.We study the sedimentology and petrography of core samples from a well in Central Luconia, for which thirteen microfacies have been identified reflecting different depositional settings. This is the first microfacies scheme elaborated for Luconian carbonates. Lithofacies and microfacies distribution are compatible with deposition in a reef complex, originating around a framework reef, within the euphotic zone. Sediments were deposited in environments of backreef, reef crest, and forereef. The fair weather wave base is marked by the presence of coralline red algae, foraminifera, decreasing degree of bioclast fragmentation and other microfacies features. As a result, a depositional-environmental model is constructed, depicting a reef complex built around a framework reef developed on the margin of an isolated platform. In addition, an innovative, preliminary time series analysis of facies, microfacies and depositional environment data reveal the existence of seasonal cycles in the stacking patterns of facies and microfacies.

New Insights into the Depositional Environments of Ordovician Carbonate Formations in the Yubei Area of Tarim Basin Based on Standard Microfacies Types

Objective The Yubei area is located in the mid-east Maigaiti slope of southwestern Tarim Basin, China, with an exploration history of several years. Recent exploration has preliminarily indicated that the Ordovician carbonate formations in this area have some oil and gas potential. Carbonate microfacies provides material basis for reservoir development, seal formation and hydrocarbon generation. Therefore, this work utilized the standard microfacies （SMF） types to study the microfacies of the Ordovician formations in the Yubei area in order to provide theoretical basis for the next exploration.

The depositional Environment at Shuidonggou Locality 2 in Northwest China at ～72-18 kaBP

Shuidonggou site has abundant Paleolithic remains of Late Pleistocene deposition. Studying the evolution of depositional environments is essential to the comprehensive understanding of the living conditions of ancient populations. To reconstruct the depositional environment at Shuidonggou, we carried out archaeological excavations and collected systematic deposition samples at the key position of Shuidonggou Locality 2 for grain size analysis and sporopollen statistics. The environmental evolution around the Shuidonggou site generally underwent four stages at ~72-18 kaBP. During the first stage （~72-41 kaBP）, the river developed with gravel and sand stratums. During the second stage （41-34 kaBP）, a swamp with numerous aquatic plants formed. In the third stage （34-29 kaBP）, site formation was characterized by shallow lake depositional conditions; the climate was relatively warm and humid. The marginal bank depositional conditions deteriorated during the fourth stage （29-18 kaBP）, and the site underwent several dry events; the climate also became drier and colder.

Factors controlling organic-rich shale development in the Liushagang Formation,Weixinan Sag,Beibu Gulf Basin:Implications of structural activity and the depositional environment

The mechanisms of lacustrine organic-rich shale formation have attracted attention due to its association with global shale oil and shale gas exploration.Samples of general-quality and excellent-quality source rocks,and oil shale from the Beibu Gulf Basin were analyzed to investigate their organic geochemistry,palynofacies,and trace elements.Hydrocarbon potential was higher in the oil shale(29.79 mg/g)than in the general-quality source rock(3.82 mg/g),and its kerogen type wasⅠ-Ⅱ2.Hydrogen-rich liptinite(cutinite and sporinite)components derived from terrigenous higher plants provided most of the hydrocarbon potential of excellent-quality source rock and oil shale.Under the influence of depressioncontrolling fault activity,a deeper subsidence center promotes the deposition of excellent-quality source rock and oil shale in brackish-hypoxic bottom water.A shallower subsidence center,due to subsag-controlling fault activity,promotes the formation of excellent-quality source rock under freshbrackish and weak oxidation-weak reducing conditions.The local uplift and shallow-slope led to the formation of general-quality source rock,under freshwater weak-oxidation conditions.A model was established for organic matter(OM)accumulation in organic-rich shales,accounting for fault activity,terrigenous hydrogen-rich OM,and the preservation conditions,to predict the development of excellent-quality source rock from areas with low levels of exploration.

Origin and depositional environments of source rocks and crude oils from Niger Delta Basin: Carbon isotopic evidence

Thirty-nine crude oils and twenty-one rock samples from Niger Delta Basin,Nigeria have been characterized based on their isotope compositions by elemental analysis-isotope ratio mass spectrometry and gas chromatography-isotope ratio mass spectrometry.The bulk carbon isotopic values of the whole rock extracts,saturate and aromatic fractions range from–28.7‰to–26.8‰,–29.2‰to–27.2‰and–28.5‰to–26.7‰,respectively while the bulk carbon isotopic values of the whole oils,saturate and aromatic fractions range from–25.4‰to–27.8‰,–25.9‰to–28.4‰and–23.5‰to–26.9‰,respectively.The average carbon isotopic compositions of individual alkanes(nC12-nC33)in the rock samples range from–34.9‰to–28.2‰whereas the average isotopic values of individual n-alkanes in the oils range from–31.1‰to–23.8‰.Theδ13C isotope ratios of pristane and phytane in the rock samples range from–29.2‰to–28.2‰and–30.2‰to–27.4‰respectively while the pristane and phytane isotopic values range from–32.1‰to–21.9‰and–30.5‰to–26.9‰,respectively.The isotopic values recorded for the samples indicated that the crude oils were formed from the mixed input of terrigenous and marine organic matter and deposited under oxic to sub-oxic condition in lacustrine-fluvial/deltaic environments.The stable carbon isotopic compositions were found to be effective in assessing the origin and depositional environments of crude oils in the Niger Delta Basin.

Microfacies Patterns and Depositional Environments of the Sarvak Formation in the Abadan Plain, Southwest of Zagros, Iran

The Sarvak Formation is the second major oil-bearing reservoir in the south and south west of Iran. The Middle Cretaceous Sarvak formation in the Zagros Mountains (Zagros Basin) is mainly composed of carbonate sequences. Based on facies studied, thirteen microfacies were recognized in the studied area, which were categorized in the three facies groups: including inner ramp, mid ramp and outer ramp. Evidences such as the gradual changes in the facies (basin slope), the absence of extensive uninterrupted barrier reef, the lack of calciturbidite and gravity sediments as well as the high proportion of grain-supported indicated that the Sarvak Formation was deposited in the ramp like depositional system, particularly on an inner ramp setting. Inner ramp facies group is the principal setting and subdivided to tidal flat, restricted and unrestricted lagoon as well as shoal sub-environments.

Facies Analysis, Depositional Environment and Diagenetic Features of the Qom Formation in the Saran Semnan, Central Iran

In this study, to identify and analyze facies of depositional environment and depositional model of Qom Formation, stratigraphic Saran Section (southwest of Semnan) was selected. Qom Formation in Saran section includes about 380 meters of conglomerate at the base, chalk, limestone, marl, and shale. Petrographic studies with facies analysis have led to the identification of 12 microfacies, these microfacies have been deposited in four facies groups including tidal flat, lagoon, barrier and open marine. Study of horizontal and vertical facies changes and their comparison with recent and ancient environments reveals that Qom Formation in this section relates to shallow marine environment and its facies were deposited in a shelf carbonate platform and are comparable with contemporary shelf platforms such as Florida and old shelf platforms such as Mozduran. The most important diagenetic processes affecting the studied section include micritization, bioturbation, cementation, dissolution, neomorphism, fracturing, mechanical and chemical compaction, hematitization and dolomitization. These processes have formed in marine, meteoric and burial diagenetic environments.

The Depositional Environment of the Cretaceous Kizilsu Group in Xinjiang——With a Discussion of the Lowermost Marine Horizon of the Cretaceous in the Western Tarim Basin

In this paper. it is demonstrated that there exist marine horizons in the upper part of the lower subcycleand the upper subeycle of the Kizilsu Group in Xinjiang. based on new evidence of authigenic glauconite.boron content. carbon and oxygen stablc isotopic analyses. and lithological and sedimentary features. The up-per part of the lower subeycle is the lowermost marine horizon of the Cretaceous in the western Tarim Basin,which is inferred to be of Barremian age.

Textural Characteristics and Depositional Environment of Ngrayong Sandstone (Middle Miocene) from Rembang Area, Northeast Java, Indonesia

Granulometric analysis of Ngrayong sandstone samples from Rembang area of NE Java (Indonesia) has been carried out to examine the textural characteristics and elucidate depositional environment. The result data from the grain size analysis indicates that the Ngrayong sediments are classified as sand or muddy sands. They are very fine- to medium-grained (phi values: 1.67 to 3.35), moderately- to well-sorted (standard deviation: 0.19 to 0.57), strongly fine-skewed to strongly coarse-skewed (skewness values: 4.82 to −5.97), and very platykurtic to very leptokurtic (kurtosis values: 0.36 to 2.41). Sandstone samples show unimodal grain size distribution. The sediments are interpreted to be transported in all three modes-traction, saltation and suspension, however, suspension and rolling are the major processes during transportation. Discriminant functions indicate diversity in the depositional environment for the sandstones. However, shallow marine is regarded as the dominant depositional environment. The preponderance of fine-grained sediments and lack of coarse sands suggest low to moderate energy conditions during deposition of Ngrayong sediments.

Contrasting Depositional Environment of Iron Formation at Endengue Area, NW Congo Craton, Southern Cameroon: New Insights from Trace and Rare Earth Elements Geochemistry

The Endengue Banded Iron Formation (BIF) is located in the northwestern edge of the Congo craton in Cameroon. Here, we report geochemical data of trace and rare earth elements (REE) of the Endengue BIF samples from the Archean Ntem complex and investigate their environmental setting. Two types of BIF occur at Endengue area, both containing minimal contamination from terrestrial material. Total REE (ΣREE) contents in the Type 1 BIF are extremely low, ranging from 0.34 to 1.83 ppm, similarly to pure chemical sediments while Type 2 BIF displays ΣREE contents ranging from 2.98 to 24.26 ppm. The PAAS-normalized REE + Y patterns of the two BIF types display LREE enrichment relative to HREE and weak positive Eu anomaly, most likely suggesting that the source of iron and siliceous of the Endengue BIFs is mainly from the contribution of low-temperature hydrothermal alteration of the crust. Type 1 BIF shows very low Nd content (<1 ppm) with positive correlation between Nd and Ce/Ce* and positive Ce anomalies which suggests suboxic or anoxic seawater similar to the depositional environment of Elom BIF in Archean Ntem complex. In contrast, Type 2 BIF displays low to moderate Nd contents (1 and 100 ppm with the exception of sample LBR65) with negative correlation between Nd and Ce/Ce* and negative Ce anomalies. These features indicate precipatation of Type 2 BIF from oxic iron-rich solution that changed to oxidized surface by rapid precipitation of the hydrothermal Fe. The Endengue BIFs were deposited in the continental margin ocean in presence of low-temperature hydrothermal fluids mixed with seawater, similar to Paleoproterozoic Kpwa-Atog Boga BIFs within the Nyong group and other Paleoproterozoic Superior-type BIFs worldwide.

Geochemical,mineralogical,and petrological characteristics of the Cretaceous coal from the middle Benue Trough Basin,Nigeria:Implication for coal depositional environments

The Benue Trough Basin (BTB) of Nigeria is geologically and geo-morphologically subdivided into upper,middle, and lower segments. The BTB is the subject of geological research due to its rich coal depositsthat have the potential for oil and gas. The purpose of the present study is to examine the origins,depositional environments, and thermal history of the selected coals and the processes that influencetheir quality. Coal samples from different open cast coal mines in the middle BTB were examined usingproximate and ultimate, x-ray diffraction (XRD), x-ray fluorescence (XRF), laser ablation induced coupledplasma (LA-ICPMS), and petrographical analyses. The coal samples contained mainly quartz, kaolinite,and organic carbon. The XRD spectra peaks revealed the triclinic and monoclinic structure of kaolin. TheSiO2/Al2O3 ratios confirmed the dominance of quartz and kaolinite. The Ni/Co versus V/Cr, Cu/Zn, and V/Mo values in the studied coals suggest oxic depositional environments, whereas the V/(Ni þ V) and V/(V þ Cr) values indicate oxic to suboxic conditions. The Ce/Ce* values are slightly below 1, which indicates a suboxic depositional environment. Maceral texture is indicative of transformations from subbituminous to high volatile C or B bituminous coal. The maceral components and mineral matter(10%) of the studied coals imply deposition in the planar margin mire, and a river system of planarmargin mire environments, respectively. The high gelification index (GI) and tissue preservation index(TPI) values indicate peat accumulation developed within a wet forest swamp. The ternary diagram ofthe maceral component suggests deposition in a wet moor environment with intermittent moderate tohigh flooding episodes. The studied coals are sub-hydrous vitrinite inferring hydrogen-poor and thermally immature characteristics. The low V and Ni contents, low H/C and high O/C, indicate Type IIIterrestrial organic matter with the potential to generate gaseous hydrocarbons. The investigated coalswere deposited by the river within telmatic, limnic, and limno-telmatic zones in the planar margin mire depositional environments. Overall, the integrated petrologic and geochemical data used in this studyprovides a reliable approach for the assessment of coal depositional environments.

Facies Interpretation, Depositional Environment and Sequence Stratigraphy of the Sartakht Formation in the Bakhshi Section, Located in Kalmard Block, East-Central Iran

Permian rocks in Kalmard block are recognized with Khan Group, enjoying various characteristics in different outcrops. This group is made up of three informal formations, namely Chili, Sartakht and Hermez. Middle Permian deposits (Sartakht formation) are composed chiefly of sandstone and carbonate rocks. This formation is composed of 58.6 m sandstone and dolomitic limestone in the Bakhshi section. Lower Permian carbonate deposits (Chili formation) unconformably underlie this formation while lateritic paleosols of upper Permian (Hermez formation) are depicted overlying an erosional unconformity above this formation. According to lithologic and microscopic investigations, the deposits of Sartakht formation can be divided into 2 siliciclastic petrofacies and 12 carbonate microfacies. Field observations, along with microscopic examinations, have resulted in identifying tidal flat, lagoon, shoal and open marine environments in the rocks of the studied formation. Vertical changes of microfacies and depth variation curve point to the high thickness of the microfacies of lagoon and shoal environments and low thickness of the microfacies of tidal flat and open marine environments. The carbonate-siliciclastic sequence of Sartakht formation is made up of a third-order depositional sequence, separated from carbonate depositions of lower Permian (Chili formation) and lateritic paleosols of upper Permian by type 1 sequence boundary (SB1). Siliciclastic deposits include LST system tract, and carbonate microfacies involve TST and HST system tracts, separated from each other by MFS. Sartakht formation rocks in Bakhshi section are deposited in a low-angle homoclinal ramp, mostly in the inner ramp, located in the south of Paleotethys Ocean. The depositional sequence identified in Sartakht formation points to the age of middle Permian, conforming to middle Absaroka II supersequence. The upper erosional boundary between Sartakht and Hermez formations conforms to the global-scale sea level fall.

Facies Interpretation, Depositional Environment and Sequence Stratigraphy of the Gachal Formation in the Madbeiki Section, Kalmard Block, East Central Iran

Deposits of Lower Carboniferous rocks in Kalmard block are recognized by Gachal informal formation, showing various characteristics in different outcrops. Lower Carboniferous deposits (Gachal formation) are composed chiefly of carbonate, evaporite and siliciclastic rocks. This formation is composed of 198 m sandstone, limestone and dolomite as well as a small amount of shale, marl and gypsum in the Madbeiki section. This formation unconformably underlies Precambrian metamorphic deposits (Kalmard formation) while lateritic soils of lower Permian (Chili formation) are depicted overlying an erosional unconformity above this formation. According to lithologic and microscopic investigations, the deposits of Gachal formation can be divided into 1 siliciclastic petrofacies, 1 evaporite microfacies and 16 carbonate microfacies. Field observations, along with microscopic examinations, have resulted in identifying tidal flat, lagoon, shoal and open marine environments in the rocks of the studied formation. Vertical changes of microfacies and depth variation curve indicate the high thickness of the microfacies of tidal flat, lagoon and shoal environments and low thickness of the microfacies of open marine environment. The carbonate-evaporite-siliciclastic sequence of Gachal formation is made up of three third-order depositional sequence, separated each other by type 1 sequence boundary (SB1). Siliciclastic and evaporite deposits include LST system tract, and carbonate microfacies involve TST and HST system tracts, separated from each other by MFS. Gachal formation rocks in Madbeiki section are deposited in a low-angle homoclinal ramp, mostly in the inner ramp, located in the southern Paleotethys Ocean. The depositional sequence identified in Gachal formation points to the age of Lower Carboniferous, conforming to upper Kaskaskia super sequence. The upper erosional boundary between Gachal and Chili formations conform to the global-scale sea level fall.

Interpretation of Depositional Environment of Fusulinid Bearing Middle Permian Succession of Bolula and Khaja Ghar Formation, Bamian Zone, Central Afghanistan

The study area belongs to the north Afghanistan having complex tectonic setting, because of separation of the Afghanistan plate from Pangea in Early Permian and its subsequent northward journey and collision with Eurasian plate. The rock exposed in the area belongs to Paleozoic, Mesozoic to Quaternary with Proterozoic basement. Particularly the Permian succession of Afghanistan is rich in fusulinids (larger foraminifera), is age diagnostic, provides strong biostratigraphic tool for the Permian deposits, and has paleobiogeographic applications. The Bamian zone of north Afghanistan has good exposure to Middle Permian and is designated as Bolula and Khaja Ghar Formation is undertaken in this study. The Bolula Formation overlies the greenschist and basalts, composed mainly of carbonate rocks (Dolostone and limestone), having massive limestone, with some quartz and secondary calcite vein in the succession. The intermittent siliciclastic wedges within the carbonate succession are identified as input within the platform with tectonic pulses in the hinterland. Bolula and Khaja Ghar succession is divided into 8 lithofacies ( Facies A to H) and 6 carbonate Facies viz. Sparry calcites limestone, Micritic limestone, Fossiliferous limestones (Biomicrite), Peloidal limestone (Fecal pellets), Interlaminated micritic and sparite limestone, and sandy limestone (micritic). The Bolula and Khaja Ghar Formation in the Bamian area have deposited in a shallow marine shelf environment because of predominance of carbonate rocks and presence of shallow-water marine fossils including fusulinids, small benthic foraminifera, algae, bivalve, brachiopods fragments, corals and bryozoans, etc. In the Bamian zone the unconformity between Upper Carboniferous and Lower Permian;indicates extensive gap in sedimentation, traceable to many parts of Afghanistan as unconformity or tectonic contact is considered here as sequence boundary.

Distribution and geochemical significance of alkylbenzenes for crude oil with different depositional environments and thermal maturities

A total of 45 alkylbenzenes were detected and identified in crude oils with different depositional environments and thermal maturities from the Tarim Basin,Beibuwan Basin,and Songliao Basin using comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry(GC×GCTOFMS).By analyzing the distribution characteristics of C0-C5alkylbenzenes,it is found that the content of some alkylbenzenes varies greatly in crude oils.Based on the distribution characteristics of 1,2,4,5-tetramethylbenzene(Te MB)and 1,2,3,4-Te MB,the ratio of 1,2,4,5-Te MB to 1,2,3,4-Te MB is proposed to indicate the organic matter origin and depositional environment of ancient sediments.Oil samples originated mainly from lower hydrobiont,algae,bacteria and source rocks deposited under reducing/anoxic conditions have low 1,2,4,5-/1,2,3,4-Te MB values(less than 0.6),while oil samples originated mainly from terrestrial higher plants and source rocks deposited under oxic/sub-oxic conditions have higher 1,2,4,5-/1,2,3,4-Te MB values(greater than 1.0).The significant difference of 1,2,4,5-/1,2,3,4-Te MB values is controlled by 1,2,4,5-Te MB content.1,2,4,5-Te MB content in oils derived from source rocks deposited in oxidized sedimentary environment(greater than 1.0 mg/g whole oil)is higher than that in oils from source rocks deposited in reduced sedimentary environment(less than 1.0 mg/g whole oil).1,2,4,5-/1,2,3,4-Te MB ratio might not or slightly be affected by evaporative fractionation,biodegradation and thermal maturity.1,2,4,5-/1,2,3,4-Te MB ratio and 1,2,4,5-Te MB content can be used as supplementary parameter for the identification of sedimentary environment and organic matter input.It should be noted that compared to the identification of organic matter sources,the 1,2,4,5-/1,2,3,4-Te MB parameter is more effective in identifying sedimentary environments.