For optimization of production processes and product quality,often knowledge of the factors influencing the process outcome is compulsory.Thus,process analytical technology(PAT)that allows deeper insight into the proc...For optimization of production processes and product quality,often knowledge of the factors influencing the process outcome is compulsory.Thus,process analytical technology(PAT)that allows deeper insight into the process and results in a mathematical description of the process behavior as a simple function based on the most important process factors can help to achieve higher production efficiency and quality.The present study aims at characterizing a well-known industrial process,the transesterification reaction of rapeseed oil with methanol to produce fatty acid methyl esters(FAME)for usage as biodiesel in a continuous micro reactor set-up.To this end,a design of experiment approach is applied,where the effects of two process factors,the molar ratio and the total flow rate of the reactants,are investigated.The optimized process target response is the FAME mass fraction in the purified nonpolar phase of the product as a measure of reaction yield.The quantification is performed using attenuated total reflection infrared spectroscopy in combination with partial least squares regression.The data retrieved during the conduction of the DoE experimental plan were used for statistical analysis.A non-linear model indicating a synergistic interaction between the studied factors describes the reactor behavior with a high coefficient of determination(R^(2))of 0.9608.Thus,we applied a PAT approach to generate further insight into this established industrial process.展开更多
Due to the complex chemical composition of nickel ores, the requests for the decrease of production costs, and the increase of nickel extraction in the existing depletion of high-grade sulfide ores around the world, c...Due to the complex chemical composition of nickel ores, the requests for the decrease of production costs, and the increase of nickel extraction in the existing depletion of high-grade sulfide ores around the world, computer modeling of nickel ore leaching process be- came a need and a challenge. In this paper, the design of experiments (DOE) theory was used to determine the optimal experimental design plan matrix based on the D optimality criterion. In the high-pressure sulfuric acid leaching (HPSAL) process for nickel laterite in "Rudjinci" ore in Serbia, the temperature, the sulfuric acid to ore ratio, the stirring speed, and the leaching time as the predictor variables, and the degree of nickel extraction as the response have been considered. To model the process, the multiple linear regression (MLR) and response surface method (RSM), together with the two-level and four-factor full factorial central composite design (CCD) plan, were used. The proposed re- gression models have not been proven adequate. Therefore, the artificial neural network (ANN) approach with the same experimental plan was used in order to reduce operational costs, give a better modeling accuracy, and provide a more successful process optimization. The model is based on the multi-layer neural networks with the back-propagation (BP) learning algorithm and the bipolar sigmoid activation function.展开更多
Recently, some results have been acquired with the Monte- Carlo statistical experiments in the design of ocean en gineering. The results show that Monte-Carlo statistical experiments can be widely used in estimating t...Recently, some results have been acquired with the Monte- Carlo statistical experiments in the design of ocean en gineering. The results show that Monte-Carlo statistical experiments can be widely used in estimating the parameters of wave statistical distributions, checking the probability model of the long- term wave extreme value distribution under a typhoon condition and calculating the failure probability of the ocean platforms.展开更多
This paper presents a cloud-based data-driven design optimization system,named DADOS,to help engineers and researchers improve a design or product easily and efficiently.DADOS has nearly 30 key algorithms,including th...This paper presents a cloud-based data-driven design optimization system,named DADOS,to help engineers and researchers improve a design or product easily and efficiently.DADOS has nearly 30 key algorithms,including the design of experiments,surrogate models,model validation and selection,prediction,optimization,and sensitivity analysis.Moreover,it also includes an exclusive ensemble surrogate modeling technique,the extended hybrid adaptive function,which can make use of the advantages of each surrogate and eliminate the effort of selecting the appropriate individual surrogate.To improve ease of use,DADOS provides a user-friendly graphical user interface and employed flow-based programming so that users can conduct design optimization just by dragging,dropping,and connecting algorithm blocks into a workflow instead of writing massive code.In addition,DADOS allows users to visualize the results to gain more insights into the design problems,allows multi-person collaborating on a project at the same time,and supports multi-disciplinary optimization.This paper also details the architecture and the user interface of DADOS.Two examples were employed to demonstrate how to use DADOS to conduct data-driven design optimization.Since DADOS is a cloud-based system,anyone can access DADOS at www.dados.com.cn using their web browser without the need for installation or powerful hardware.展开更多
In this study, a design of experiments (DoE) approach was used to develop a PLA open-cell foam morphology using the compression molding technique. The effect of three molding parameters (foaming time, mold opening tem...In this study, a design of experiments (DoE) approach was used to develop a PLA open-cell foam morphology using the compression molding technique. The effect of three molding parameters (foaming time, mold opening temperature, and weight concentration of the ADA blowing agent) on the cellular structure was investigated. A regression equation relating the average cell size to the above three processing parameters was developed from the DoE and the analysis of variance (ANOVA) was used to find the best dimensional fitting parameters based on the experimental data. With the help of the DoE technique, we were able to develop various foam morphologies having different average cell size distribution levels, which is important in the development of open-cell PLA scaffolds for bone regeneration for which the control of cell morphology is crucial for osteoblasts proliferation. For example, at a constant ADA weight concentration of 5.95 wt%, we were able to develop a narrow average cell size distribution ranging between 275 and 300 μm by varying the mold opening temperature between 106°C and 112°C, while maintaining the foaming time constant at 8 min, or by varying the mold foaming time between 6 and 11 min and maintaining the mold opening temperature at 109°C.展开更多
As a highly tempting technology to close the carbon cycle,electrochemical CO_(2)reduction calls for the development of highly efficient and durable electrocatalysts.In the current study,Design of Experiments utilizing...As a highly tempting technology to close the carbon cycle,electrochemical CO_(2)reduction calls for the development of highly efficient and durable electrocatalysts.In the current study,Design of Experiments utilizing the response surface method is exploited to predict the optimal process variables for preparing high-performance Cu catalysts,unraveling that the selectivity towards methane or ethylene can be simply modulated by varying the evaporation parameters,among which the Cu film thickness is the most pivotal factor to determine the product selectivity.The predicted optimal catalyst with a low Cu thickness affords a high methane Faradaic efficiency of 70.6%at the partial current density of 211.8 m A cm^(-2),whereas that of a high Cu thickness achieves a high ethylene selectivity of 66.8%at267.2 m A cm^(-2)in the flow cell.Further structure-performance correlation and in-situ electrospectroscopic measurements attribute the high methane selectivity to isolated Cu clusters with low packing density and monotonous lattice structure,and the high ethylene efficiency to coalesced Cu nanoparticles with rich grain boundaries and lattice defects.The high Cu packing density and crystallographic diversity is of essence to promoting C–C coupling by stabilizing*CO and suppressing*H coverage on the catalyst surface.This work highlights the implementation of scientific and mathematic methods to uncover optimal catalysts and mechanistic understandings toward selective electrochemical CO_(2)reduction.展开更多
Objective:Quality by design integration is exceedingly imperative for industries dealing with pharmaceuticals,but it diminishes product variability and delivers an extraordinary degree of assurance that the product wo...Objective:Quality by design integration is exceedingly imperative for industries dealing with pharmaceuticals,but it diminishes product variability and delivers an extraordinary degree of assurance that the product would achieve the purpose for which it was formulated.The objective of the manuscript is to strengthen the understanding of the design of experimentation approach from the primary level.Hence,this review paper aims to get one experience with a course emphasizing product quality during its development process.Methods:The present work describes how experimental statistical designs can optimize the process.It is a strategy to improve the manufacturing of products and discuss the main factors involved in the production.The review describes different designs,advantages,disadvantages and design of experiments requirements concerning regulatory submissions.Results:Quality by design encourages the pharmaceutical industry to deal with risk management and proper understanding of products and manufacturing processes,assuring a good quality product.Having knowledge of quality by design and design of experiments in the formulation and process development will be beneficial for the optimization of drug delivery systems in upcoming times.Conclusion:Implementing quality by design at different phases in pharmaceutical manufacturing,the final product with a great degree of reproducible quality may be assured,depending upon experimental data.This contains valuable information in guiding new researchers about the importance and ways of using the design of experiments.展开更多
The design of new Satellite Launch Vehicle (SLV) is of interest, especially when a combination of Solid and Liquid Propulsion is included. Proposed is a conceptual design and optimization technique for multistage Lo...The design of new Satellite Launch Vehicle (SLV) is of interest, especially when a combination of Solid and Liquid Propulsion is included. Proposed is a conceptual design and optimization technique for multistage Low Earth Orbit (LEO) bound SLV comprising of solid and liquid stages with the use of Genetic Algorithm (GA) as global optimizer. Convergence of GA is improved by introducing initial population based on the Design of Experiments (DOE) Technique. Latin Hypercube Sampling (LHS)-DOE is used for its good space filling properties. LHS is a stratified random procedure that provides an efficient way of sampling variables from their multivariate distributions. In SLV design minimum Gross Lift offWeight (GLOW) concept is traditionally being sought. Since the development costs tend to vary as a function of GLOW, this minimum GLOW is considered as a minimum development cost concept. The design approach is meaningful to initial design sizing purpose for its computational efficiency gives a quick insight into the vehicle performance prior to detailed design.展开更多
Experimentation has come a long in helping researchers achieve breakthroughs in their different scientific areas and engineering happens to be one of those areas with the most impact from experimental advancement. The...Experimentation has come a long in helping researchers achieve breakthroughs in their different scientific areas and engineering happens to be one of those areas with the most impact from experimental advancement. The need for valid experimental results free from biases and confounding conclusions has prompted the development of new experimental techniques that takes consideration of all applicable factor and combinations in providing answers on a research topic, and the Factorial Experimental design credited to Sir Ronald Fisher is one technique yielding highly valid results. This paper uses the factorial design of experiments to research the flexural impact of polyvinyl acetate fiber and layered concrete in construction. The experiment considered two levels of fiber contents and two levels of layers, and prepared samples with all combinations of the variable factors. The samples were tested after 7 days from casting for flexural strength and an advance statistical analysis was performed on the flexural responses of the samples using R-program. The results from the analyses revealed the significance of the variables to the flexural strength of the samples, as well as their interactions. The experiment concluded that based on the number of layers and fiber content used for the experiment, casting concrete in layers does have a significant negative effect on the flexural strength of concrete, and the failure pattern of concrete members under flexural load in evidently influenced by the material composition of the concrete, and that it can be evidently influenced by casting the concrete in layers.展开更多
Spraying parameters during particle agglomeration processes can affect the agglomeration kinetics and particle growth.This study was conducted to better understand the influence of the spraying parameters in a fluidiz...Spraying parameters during particle agglomeration processes can affect the agglomeration kinetics and particle growth.This study was conducted to better understand the influence of the spraying parameters in a fluidized bed wet agglomeration process,and the influence on the stability characteristics of carbon tablets.A formulation based on fine carbon and peroxide powder,as well as carboxymethyl cellulose as a binder,was used to produce agglomerates in a first production step.Thereafter in a second production step carbon tablets with a high porosity were molded for the customer goods industry.The optimization of the compressive strength of these carbon tablets was the goal of the trials.Carbon agglomerates were produced with a laboratory scale granulator called“ProCell”and were compressed with a five-cavity mechanical press.The screening of the agglomeration process parameters and their influence on the agglomerates quality,as well as the performance characteristics of the carbon tablets,were investigated using a multilevel factorial design.The experimental runs were done by varying atomized air pressure and feed rate of the fluid.This was determined by the design model.The findings of the statistical trials showed that low atomized air pressure and a low feed rate lead to a higher tablet compressive strength.展开更多
Cavitation is one of the most important performance of centrifugal pumps. However, the current optimization works of centrifugal pump are mostly focusing on hydraulic efficiency only, which may result in poor cavitati...Cavitation is one of the most important performance of centrifugal pumps. However, the current optimization works of centrifugal pump are mostly focusing on hydraulic efficiency only, which may result in poor cavitation performance. Therefore, it is necessary to find an appropriate solution to improve cavitation performance with acceptable efficiency. In this paper, to improve the cavitation performance of a centrifugal pump with a vaned diffuser, the influence of impeller geometric parameters on the cavitation of the pump is investigated using the orthogonal design of experiment (DOE) based on computational fluid dynamics. The impeller inlet diameter D1, inlet incidence angle Aft, and blade wrap angle ~0 are selected as the main impeller geometric parameters and the orthogonal experiment of L9(3"3) is performed. Three-dimensional steady simulations for cavitation are conducted by using constant gas mass fraction model with second-order upwind, and the predicated cavitation performance is validated by laboratory experiment. The optimization results are obtained by the range analysis method to improve cavitation performance without obvious decreasing the efficiency of the centrifugal pump. The internal flow of the pump is analyzed in order to identify the flow behavior that can affect cavitation performance. The results show that D1 has the greatest influence on the pump cavitation and the final optimized impeller provides better flow distribution at blade leading edge. The final optimized impeller accomplishes better cavitation and hydraulic performance and the NPSHR decreases by 0.63m compared with the original one. The presented work supplies a feasible route in engineering practice to optimize a centrifugal pump impeller for better cavitation performance.展开更多
Four process parameters, pad diameter, stencil thickness, ball diameter and stand-off were chosen as four control factors. By using an L25 (5^6 ) orthogonal array the ceramic ball grid array ( CBGA ) solder joints...Four process parameters, pad diameter, stencil thickness, ball diameter and stand-off were chosen as four control factors. By using an L25 (5^6 ) orthogonal array the ceramic ball grid array ( CBGA ) solder joints which have 25 different combinations of process parameters were designed. The numerical models of all the 25 CBGA solder joints were developed using the Sugrace Evolver. Utilizing the sugrace coordinate exported from the 25 CBGA solder joints numerical models, the finite element analysis models were set up and the nonlinear finite element analysis of the CBGA solder joints under thermal cycles were pegrormed by ANSYS. The thermal fatigue life of CBGA solder joint was calculated using Coffin-Manson equation. Based on the calculated thermal fatigue life results, the range analysis and the variance analysis were pegrormed. The results show that the fatigue life of CBGA solder joint is affected by the pad diameter, the stencil thickness, the ball diameter and the stand-off in a descending order, the best combination of process parameters results in the longest fatigue life is 0.07 mm stand-off, 0.125 mm stencil thickness of, 0.85 mm ball diameter and 0. 89 mm pad diameter. With 95% confidence the pad diameter has a significant effect on the reliability of CBGA solder joints whereas the stand-off, the stencil thickness and the ball diameter have little effect on the reliability of CBGA solder joints.展开更多
The geometry of an inductively coupled plasma (ICP) etcher is usually considered to be an important factor for determining both plasma and process uniformity over a large wafer. During the past few decades, these pa...The geometry of an inductively coupled plasma (ICP) etcher is usually considered to be an important factor for determining both plasma and process uniformity over a large wafer. During the past few decades, these parameters were determined by the "trial and error" method, resulting in wastes of time and funds. In this paper, a new approach of regression orthogonal design with plasma simulation experiments is proposed to investigate the sensitivity of the structural parameters on the uniformity of plasma characteristics. The tool for simulating plasma is CFD-ACE+, which is commercial multi-physical modeling software that has been proven to be accurate for plasma simulation. The simulated experimental results are analyzed to get a regression equation on three structural parameters. Through this equation, engineers can compute the uniformity of the electron number density rapidly without modeling by CFD-ACE+. An optimization performed at the end produces good results.展开更多
Identification of process parameters,their effects and contributions to the outcomes of the system using experimental approach could be a daunting,time consuming,and costly course.Using proper statistical methods,i.e....Identification of process parameters,their effects and contributions to the outcomes of the system using experimental approach could be a daunting,time consuming,and costly course.Using proper statistical methods,i.e.,Taguchi method,could significantly reduce the number of required experiments and statistical significance of the parameter can be identified.Friction stir welding is one of those welding techniques with many parameters which have different effects on the quality of the welds.In friction stir welding the tool rotational speed(RPM)and transverse speed(mm/min)influence the strength(i.e.,hardness distribution)of the stirred zone.In this study,these two factors are investigated to determine the effect they will have on the hardness in the stirred zone of the friction stir welds and how the two factors are related to one another for as-cast magnesium alloy AM60 with nominal chemical composition of Mg-(5.5-6.5)Al-(0.24-0.6)Mn-0.22Zn-0.1Si.Experimental data was taken at three different tool rotational speeds and three different transverse speeds.The data obtained was then analyzed using a 32 factorial design to find the contribution of these parameters.It was determined that both tool rotational speed and transverse speed possess significant effects on the stir zone hardness.Also,the interactions between the two factors were statistically assessed.展开更多
Experiment statistical method and genetic algorithms based optimization method are used to obtain the optimum differential gear ratio for heavy truck that provides best fuel consumption when changing the working condi...Experiment statistical method and genetic algorithms based optimization method are used to obtain the optimum differential gear ratio for heavy truck that provides best fuel consumption when changing the working condition that affects its torque and speed range. The aim of the study is to obtain the optimum differential gear ratio with fast and accurate optimization calculation without affecting drivability characteristics of the vehicle according to certain driving cycles that represent the new working conditions of the truck. The study is carried on a mining dump truck YT3621 with 9 for- ward shift manual transmission. Two loading conditions, no load and 40 t, and four on road real driving cycles have been discussed. The truck powertrain is modeled using GT-drive, and DOE -post processing tool of the GT-suite is used for DOE analysis and genetic algorithm optimization.展开更多
Interwell connectivities are fundamental parameters required to manage waterfloods in oil reservoirs. Data-driven models, such as the capacitance-resistance model (CRM), are fast tools to estimate these parameters f...Interwell connectivities are fundamental parameters required to manage waterfloods in oil reservoirs. Data-driven models, such as the capacitance-resistance model (CRM), are fast tools to estimate these parameters from time-correlations of input (injection rates) and output (production rates) signals. Noise and structure of the input time-series impose limits on the information that can be extracted from a given data-set. This work uses the CRM to study general prescriptions for the design of input signals that enhance the information content of injection/production data in the estimation of well-to-well interactions. Numerical schemes and general features of the optimal input signal strategy are derived for this problem.展开更多
The sample preparation of samples conlaining bovine serum albumin(BSA),e.g..as used in transdermal Franz diffusion cell(FDC) solutions,was evaluated using an analytical qualily-by-design(QbD)approach.Traditional...The sample preparation of samples conlaining bovine serum albumin(BSA),e.g..as used in transdermal Franz diffusion cell(FDC) solutions,was evaluated using an analytical qualily-by-design(QbD)approach.Traditional precipitation of BSA by adding an equal volume of organic solvent,often successfully used with conventional HPLC-PDA,was found insufficiently robust when novel fused-core HPLC and/or UPLC-MS methods were used.In this study,three factors(acetonitrile(%).formic acid(%) and boiling time(min)) were included in the experimental design to determine an optimal and more suitable sample treatment of BSAcontaining FDC solutions.Using a QbD and Derringer desirability(D) approach,combining BSA loss,dilution factor and variability,we constructed an optimal working space with the edge of failure defined as D〈0.9.The design space is modelled and is confirmed to have an ACN range of 83 ± 3% and FA content of 1 ±0.25%.展开更多
To obtain the peak response at 532nm, narrow-band response GaA1As photocathodes with two GaAIAs ac- tive layers of different aluminum compositions are designed in consideration of the maximum absorptivity and quantum ...To obtain the peak response at 532nm, narrow-band response GaA1As photocathodes with two GaAIAs ac- tive layers of different aluminum compositions are designed in consideration of the maximum absorptivity and quantum efficiency. The transmission-mode and the corresponding reflective-mode photocathodes are grown by metalorganic chemical vapor deposition. The results indicate that the peak response and the cut-off wavelength occur at 532nm for the two kinds of photocathodes respectively. The response of the reflection-mode photoeath- ode is an order of magnitude higher than that of the transmission-mode photocathode, whereas the better growth quality and the thicker second GaAIAs active layer can improve the transmission-mode response.展开更多
Neural networks are being used to construct meta-models in numerical simulation of structures.In addition to network structures and training algorithms,training samples also greatly affect the accuracy of neural netwo...Neural networks are being used to construct meta-models in numerical simulation of structures.In addition to network structures and training algorithms,training samples also greatly affect the accuracy of neural network models.In this paper,some existing main sampling techniques are evaluated,including techniques based on experimental design theory, random selection,and rotating sampling.First,advantages and disadvantages of each technique are reviewed.Then,seven techniques are used to generate samples for training radial neural networks models for two benchmarks:an antenna model and an aircraft model.Results show that the uniform design,in which the number of samples and mean square error network models are considered,is the best sampling technique for neural network based meta-model building.展开更多
The paper deals with factorial experimental design models decoding.For the ease of calculation of the experimental mathematical models,it is convenient first to code the independent variables.When selecting independen...The paper deals with factorial experimental design models decoding.For the ease of calculation of the experimental mathematical models,it is convenient first to code the independent variables.When selecting independent variables,it is necessary to take into account the range covered by each.A wide range of choices of different variables is presented in this paper.After calculating the regression model,its variables must be returned to their original values for the model to be easy recognized and represented.In the paper,the procedures of simple first order models,with interactions and with second order models,are presented,which could be a very complicated process.Models without and with the mutual influence of independent variables differ.The encoding and decoding procedure on a model with two independent first-order parameters is presented in details.Also,the procedure of model decoding is presented in the experimental surface roughness parameters models’determination,in the face milling machining process,using the first and second order model central compositional experimental design.The simple calculation procedure is recommended in the case study.Also,a large number of examples using mathematical models obtained on the basis of the presented methodology are presented throughout the paper.展开更多
文摘For optimization of production processes and product quality,often knowledge of the factors influencing the process outcome is compulsory.Thus,process analytical technology(PAT)that allows deeper insight into the process and results in a mathematical description of the process behavior as a simple function based on the most important process factors can help to achieve higher production efficiency and quality.The present study aims at characterizing a well-known industrial process,the transesterification reaction of rapeseed oil with methanol to produce fatty acid methyl esters(FAME)for usage as biodiesel in a continuous micro reactor set-up.To this end,a design of experiment approach is applied,where the effects of two process factors,the molar ratio and the total flow rate of the reactants,are investigated.The optimized process target response is the FAME mass fraction in the purified nonpolar phase of the product as a measure of reaction yield.The quantification is performed using attenuated total reflection infrared spectroscopy in combination with partial least squares regression.The data retrieved during the conduction of the DoE experimental plan were used for statistical analysis.A non-linear model indicating a synergistic interaction between the studied factors describes the reactor behavior with a high coefficient of determination(R^(2))of 0.9608.Thus,we applied a PAT approach to generate further insight into this established industrial process.
文摘Due to the complex chemical composition of nickel ores, the requests for the decrease of production costs, and the increase of nickel extraction in the existing depletion of high-grade sulfide ores around the world, computer modeling of nickel ore leaching process be- came a need and a challenge. In this paper, the design of experiments (DOE) theory was used to determine the optimal experimental design plan matrix based on the D optimality criterion. In the high-pressure sulfuric acid leaching (HPSAL) process for nickel laterite in "Rudjinci" ore in Serbia, the temperature, the sulfuric acid to ore ratio, the stirring speed, and the leaching time as the predictor variables, and the degree of nickel extraction as the response have been considered. To model the process, the multiple linear regression (MLR) and response surface method (RSM), together with the two-level and four-factor full factorial central composite design (CCD) plan, were used. The proposed re- gression models have not been proven adequate. Therefore, the artificial neural network (ANN) approach with the same experimental plan was used in order to reduce operational costs, give a better modeling accuracy, and provide a more successful process optimization. The model is based on the multi-layer neural networks with the back-propagation (BP) learning algorithm and the bipolar sigmoid activation function.
文摘Recently, some results have been acquired with the Monte- Carlo statistical experiments in the design of ocean en gineering. The results show that Monte-Carlo statistical experiments can be widely used in estimating the parameters of wave statistical distributions, checking the probability model of the long- term wave extreme value distribution under a typhoon condition and calculating the failure probability of the ocean platforms.
基金Supported by National Key Research and Development Program of China (Grant No.2018YFB1700704)National Natural Science Foundation of China (Grant No.52075068)。
文摘This paper presents a cloud-based data-driven design optimization system,named DADOS,to help engineers and researchers improve a design or product easily and efficiently.DADOS has nearly 30 key algorithms,including the design of experiments,surrogate models,model validation and selection,prediction,optimization,and sensitivity analysis.Moreover,it also includes an exclusive ensemble surrogate modeling technique,the extended hybrid adaptive function,which can make use of the advantages of each surrogate and eliminate the effort of selecting the appropriate individual surrogate.To improve ease of use,DADOS provides a user-friendly graphical user interface and employed flow-based programming so that users can conduct design optimization just by dragging,dropping,and connecting algorithm blocks into a workflow instead of writing massive code.In addition,DADOS allows users to visualize the results to gain more insights into the design problems,allows multi-person collaborating on a project at the same time,and supports multi-disciplinary optimization.This paper also details the architecture and the user interface of DADOS.Two examples were employed to demonstrate how to use DADOS to conduct data-driven design optimization.Since DADOS is a cloud-based system,anyone can access DADOS at www.dados.com.cn using their web browser without the need for installation or powerful hardware.
文摘In this study, a design of experiments (DoE) approach was used to develop a PLA open-cell foam morphology using the compression molding technique. The effect of three molding parameters (foaming time, mold opening temperature, and weight concentration of the ADA blowing agent) on the cellular structure was investigated. A regression equation relating the average cell size to the above three processing parameters was developed from the DoE and the analysis of variance (ANOVA) was used to find the best dimensional fitting parameters based on the experimental data. With the help of the DoE technique, we were able to develop various foam morphologies having different average cell size distribution levels, which is important in the development of open-cell PLA scaffolds for bone regeneration for which the control of cell morphology is crucial for osteoblasts proliferation. For example, at a constant ADA weight concentration of 5.95 wt%, we were able to develop a narrow average cell size distribution ranging between 275 and 300 μm by varying the mold opening temperature between 106°C and 112°C, while maintaining the foaming time constant at 8 min, or by varying the mold foaming time between 6 and 11 min and maintaining the mold opening temperature at 109°C.
基金supported by the National Key R&D Program of China(2020YFB1505703)the National Natural Science Foundation of China(22072101,22075193)+2 种基金supported by the Natural Science Foundation of Jiangsu Province(BK20211306)the Six Talent Peaks Project in Jiangsu Province(TD-XCL-006)the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions。
文摘As a highly tempting technology to close the carbon cycle,electrochemical CO_(2)reduction calls for the development of highly efficient and durable electrocatalysts.In the current study,Design of Experiments utilizing the response surface method is exploited to predict the optimal process variables for preparing high-performance Cu catalysts,unraveling that the selectivity towards methane or ethylene can be simply modulated by varying the evaporation parameters,among which the Cu film thickness is the most pivotal factor to determine the product selectivity.The predicted optimal catalyst with a low Cu thickness affords a high methane Faradaic efficiency of 70.6%at the partial current density of 211.8 m A cm^(-2),whereas that of a high Cu thickness achieves a high ethylene selectivity of 66.8%at267.2 m A cm^(-2)in the flow cell.Further structure-performance correlation and in-situ electrospectroscopic measurements attribute the high methane selectivity to isolated Cu clusters with low packing density and monotonous lattice structure,and the high ethylene efficiency to coalesced Cu nanoparticles with rich grain boundaries and lattice defects.The high Cu packing density and crystallographic diversity is of essence to promoting C–C coupling by stabilizing*CO and suppressing*H coverage on the catalyst surface.This work highlights the implementation of scientific and mathematic methods to uncover optimal catalysts and mechanistic understandings toward selective electrochemical CO_(2)reduction.
文摘Objective:Quality by design integration is exceedingly imperative for industries dealing with pharmaceuticals,but it diminishes product variability and delivers an extraordinary degree of assurance that the product would achieve the purpose for which it was formulated.The objective of the manuscript is to strengthen the understanding of the design of experimentation approach from the primary level.Hence,this review paper aims to get one experience with a course emphasizing product quality during its development process.Methods:The present work describes how experimental statistical designs can optimize the process.It is a strategy to improve the manufacturing of products and discuss the main factors involved in the production.The review describes different designs,advantages,disadvantages and design of experiments requirements concerning regulatory submissions.Results:Quality by design encourages the pharmaceutical industry to deal with risk management and proper understanding of products and manufacturing processes,assuring a good quality product.Having knowledge of quality by design and design of experiments in the formulation and process development will be beneficial for the optimization of drug delivery systems in upcoming times.Conclusion:Implementing quality by design at different phases in pharmaceutical manufacturing,the final product with a great degree of reproducible quality may be assured,depending upon experimental data.This contains valuable information in guiding new researchers about the importance and ways of using the design of experiments.
文摘The design of new Satellite Launch Vehicle (SLV) is of interest, especially when a combination of Solid and Liquid Propulsion is included. Proposed is a conceptual design and optimization technique for multistage Low Earth Orbit (LEO) bound SLV comprising of solid and liquid stages with the use of Genetic Algorithm (GA) as global optimizer. Convergence of GA is improved by introducing initial population based on the Design of Experiments (DOE) Technique. Latin Hypercube Sampling (LHS)-DOE is used for its good space filling properties. LHS is a stratified random procedure that provides an efficient way of sampling variables from their multivariate distributions. In SLV design minimum Gross Lift offWeight (GLOW) concept is traditionally being sought. Since the development costs tend to vary as a function of GLOW, this minimum GLOW is considered as a minimum development cost concept. The design approach is meaningful to initial design sizing purpose for its computational efficiency gives a quick insight into the vehicle performance prior to detailed design.
文摘Experimentation has come a long in helping researchers achieve breakthroughs in their different scientific areas and engineering happens to be one of those areas with the most impact from experimental advancement. The need for valid experimental results free from biases and confounding conclusions has prompted the development of new experimental techniques that takes consideration of all applicable factor and combinations in providing answers on a research topic, and the Factorial Experimental design credited to Sir Ronald Fisher is one technique yielding highly valid results. This paper uses the factorial design of experiments to research the flexural impact of polyvinyl acetate fiber and layered concrete in construction. The experiment considered two levels of fiber contents and two levels of layers, and prepared samples with all combinations of the variable factors. The samples were tested after 7 days from casting for flexural strength and an advance statistical analysis was performed on the flexural responses of the samples using R-program. The results from the analyses revealed the significance of the variables to the flexural strength of the samples, as well as their interactions. The experiment concluded that based on the number of layers and fiber content used for the experiment, casting concrete in layers does have a significant negative effect on the flexural strength of concrete, and the failure pattern of concrete members under flexural load in evidently influenced by the material composition of the concrete, and that it can be evidently influenced by casting the concrete in layers.
文摘Spraying parameters during particle agglomeration processes can affect the agglomeration kinetics and particle growth.This study was conducted to better understand the influence of the spraying parameters in a fluidized bed wet agglomeration process,and the influence on the stability characteristics of carbon tablets.A formulation based on fine carbon and peroxide powder,as well as carboxymethyl cellulose as a binder,was used to produce agglomerates in a first production step.Thereafter in a second production step carbon tablets with a high porosity were molded for the customer goods industry.The optimization of the compressive strength of these carbon tablets was the goal of the trials.Carbon agglomerates were produced with a laboratory scale granulator called“ProCell”and were compressed with a five-cavity mechanical press.The screening of the agglomeration process parameters and their influence on the agglomerates quality,as well as the performance characteristics of the carbon tablets,were investigated using a multilevel factorial design.The experimental runs were done by varying atomized air pressure and feed rate of the fluid.This was determined by the design model.The findings of the statistical trials showed that low atomized air pressure and a low feed rate lead to a higher tablet compressive strength.
基金Supported by National Science&Technology Pillar Program of China(Grant No.2014BAB08B01)National Natural Science Foundation of China(Grant No.51409123)+1 种基金Jiangsu Provincial Natural Science Foundation of China(Grant No.BK20140554)Training Project for Young Core Teacher of Jiangsu University,China
文摘Cavitation is one of the most important performance of centrifugal pumps. However, the current optimization works of centrifugal pump are mostly focusing on hydraulic efficiency only, which may result in poor cavitation performance. Therefore, it is necessary to find an appropriate solution to improve cavitation performance with acceptable efficiency. In this paper, to improve the cavitation performance of a centrifugal pump with a vaned diffuser, the influence of impeller geometric parameters on the cavitation of the pump is investigated using the orthogonal design of experiment (DOE) based on computational fluid dynamics. The impeller inlet diameter D1, inlet incidence angle Aft, and blade wrap angle ~0 are selected as the main impeller geometric parameters and the orthogonal experiment of L9(3"3) is performed. Three-dimensional steady simulations for cavitation are conducted by using constant gas mass fraction model with second-order upwind, and the predicated cavitation performance is validated by laboratory experiment. The optimization results are obtained by the range analysis method to improve cavitation performance without obvious decreasing the efficiency of the centrifugal pump. The internal flow of the pump is analyzed in order to identify the flow behavior that can affect cavitation performance. The results show that D1 has the greatest influence on the pump cavitation and the final optimized impeller provides better flow distribution at blade leading edge. The final optimized impeller accomplishes better cavitation and hydraulic performance and the NPSHR decreases by 0.63m compared with the original one. The presented work supplies a feasible route in engineering practice to optimize a centrifugal pump impeller for better cavitation performance.
基金This work was supported by Science Foundation of Guangxi Zhuang Autonomous Region (Contract No. 02336060).
文摘Four process parameters, pad diameter, stencil thickness, ball diameter and stand-off were chosen as four control factors. By using an L25 (5^6 ) orthogonal array the ceramic ball grid array ( CBGA ) solder joints which have 25 different combinations of process parameters were designed. The numerical models of all the 25 CBGA solder joints were developed using the Sugrace Evolver. Utilizing the sugrace coordinate exported from the 25 CBGA solder joints numerical models, the finite element analysis models were set up and the nonlinear finite element analysis of the CBGA solder joints under thermal cycles were pegrormed by ANSYS. The thermal fatigue life of CBGA solder joint was calculated using Coffin-Manson equation. Based on the calculated thermal fatigue life results, the range analysis and the variance analysis were pegrormed. The results show that the fatigue life of CBGA solder joint is affected by the pad diameter, the stencil thickness, the ball diameter and the stand-off in a descending order, the best combination of process parameters results in the longest fatigue life is 0.07 mm stand-off, 0.125 mm stencil thickness of, 0.85 mm ball diameter and 0. 89 mm pad diameter. With 95% confidence the pad diameter has a significant effect on the reliability of CBGA solder joints whereas the stand-off, the stencil thickness and the ball diameter have little effect on the reliability of CBGA solder joints.
基金supported by Important National Science & Technology Specific Projects of China (No.2) (Nos.2009ZX02001,2011ZX02403)
文摘The geometry of an inductively coupled plasma (ICP) etcher is usually considered to be an important factor for determining both plasma and process uniformity over a large wafer. During the past few decades, these parameters were determined by the "trial and error" method, resulting in wastes of time and funds. In this paper, a new approach of regression orthogonal design with plasma simulation experiments is proposed to investigate the sensitivity of the structural parameters on the uniformity of plasma characteristics. The tool for simulating plasma is CFD-ACE+, which is commercial multi-physical modeling software that has been proven to be accurate for plasma simulation. The simulated experimental results are analyzed to get a regression equation on three structural parameters. Through this equation, engineers can compute the uniformity of the electron number density rapidly without modeling by CFD-ACE+. An optimization performed at the end produces good results.
文摘Identification of process parameters,their effects and contributions to the outcomes of the system using experimental approach could be a daunting,time consuming,and costly course.Using proper statistical methods,i.e.,Taguchi method,could significantly reduce the number of required experiments and statistical significance of the parameter can be identified.Friction stir welding is one of those welding techniques with many parameters which have different effects on the quality of the welds.In friction stir welding the tool rotational speed(RPM)and transverse speed(mm/min)influence the strength(i.e.,hardness distribution)of the stirred zone.In this study,these two factors are investigated to determine the effect they will have on the hardness in the stirred zone of the friction stir welds and how the two factors are related to one another for as-cast magnesium alloy AM60 with nominal chemical composition of Mg-(5.5-6.5)Al-(0.24-0.6)Mn-0.22Zn-0.1Si.Experimental data was taken at three different tool rotational speeds and three different transverse speeds.The data obtained was then analyzed using a 32 factorial design to find the contribution of these parameters.It was determined that both tool rotational speed and transverse speed possess significant effects on the stir zone hardness.Also,the interactions between the two factors were statistically assessed.
文摘Experiment statistical method and genetic algorithms based optimization method are used to obtain the optimum differential gear ratio for heavy truck that provides best fuel consumption when changing the working condition that affects its torque and speed range. The aim of the study is to obtain the optimum differential gear ratio with fast and accurate optimization calculation without affecting drivability characteristics of the vehicle according to certain driving cycles that represent the new working conditions of the truck. The study is carried on a mining dump truck YT3621 with 9 for- ward shift manual transmission. Two loading conditions, no load and 40 t, and four on road real driving cycles have been discussed. The truck powertrain is modeled using GT-drive, and DOE -post processing tool of the GT-suite is used for DOE analysis and genetic algorithm optimization.
基金financial support and to the Center for Petroleum Asset Risk Management of the University of Texas at Austin for hospitality and an exciting research environment
文摘Interwell connectivities are fundamental parameters required to manage waterfloods in oil reservoirs. Data-driven models, such as the capacitance-resistance model (CRM), are fast tools to estimate these parameters from time-correlations of input (injection rates) and output (production rates) signals. Noise and structure of the input time-series impose limits on the information that can be extracted from a given data-set. This work uses the CRM to study general prescriptions for the design of input signals that enhance the information content of injection/production data in the estimation of well-to-well interactions. Numerical schemes and general features of the optimal input signal strategy are derived for this problem.
基金the Special Research Fund of Ghent University(BOF 01D23812 to Lien Taevernier and BOF O1J22510 to Evelien Wynendaele and Professor Bart De Spiegeleer)the Institute for the Promotion of Innovation through Science and Technology in Flanders(IWT 101529 to Matthias D'Hondt)for their financial funding
文摘The sample preparation of samples conlaining bovine serum albumin(BSA),e.g..as used in transdermal Franz diffusion cell(FDC) solutions,was evaluated using an analytical qualily-by-design(QbD)approach.Traditional precipitation of BSA by adding an equal volume of organic solvent,often successfully used with conventional HPLC-PDA,was found insufficiently robust when novel fused-core HPLC and/or UPLC-MS methods were used.In this study,three factors(acetonitrile(%).formic acid(%) and boiling time(min)) were included in the experimental design to determine an optimal and more suitable sample treatment of BSAcontaining FDC solutions.Using a QbD and Derringer desirability(D) approach,combining BSA loss,dilution factor and variability,we constructed an optimal working space with the edge of failure defined as D〈0.9.The design space is modelled and is confirmed to have an ACN range of 83 ± 3% and FA content of 1 ±0.25%.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61171042 and 61301023the Introducing Talent Scientific Initial Foundation of Nanjing Institute of Technology of China under Grant Nos YKJ201320,YKJ201322,and YKJ201323
文摘To obtain the peak response at 532nm, narrow-band response GaA1As photocathodes with two GaAIAs ac- tive layers of different aluminum compositions are designed in consideration of the maximum absorptivity and quantum efficiency. The transmission-mode and the corresponding reflective-mode photocathodes are grown by metalorganic chemical vapor deposition. The results indicate that the peak response and the cut-off wavelength occur at 532nm for the two kinds of photocathodes respectively. The response of the reflection-mode photoeath- ode is an order of magnitude higher than that of the transmission-mode photocathode, whereas the better growth quality and the thicker second GaAIAs active layer can improve the transmission-mode response.
基金Specialized Research Fund for the Doctoral Program of Higher Education,China (No.20010227012)
文摘Neural networks are being used to construct meta-models in numerical simulation of structures.In addition to network structures and training algorithms,training samples also greatly affect the accuracy of neural network models.In this paper,some existing main sampling techniques are evaluated,including techniques based on experimental design theory, random selection,and rotating sampling.First,advantages and disadvantages of each technique are reviewed.Then,seven techniques are used to generate samples for training radial neural networks models for two benchmarks:an antenna model and an aircraft model.Results show that the uniform design,in which the number of samples and mean square error network models are considered,is the best sampling technique for neural network based meta-model building.
文摘The paper deals with factorial experimental design models decoding.For the ease of calculation of the experimental mathematical models,it is convenient first to code the independent variables.When selecting independent variables,it is necessary to take into account the range covered by each.A wide range of choices of different variables is presented in this paper.After calculating the regression model,its variables must be returned to their original values for the model to be easy recognized and represented.In the paper,the procedures of simple first order models,with interactions and with second order models,are presented,which could be a very complicated process.Models without and with the mutual influence of independent variables differ.The encoding and decoding procedure on a model with two independent first-order parameters is presented in details.Also,the procedure of model decoding is presented in the experimental surface roughness parameters models’determination,in the face milling machining process,using the first and second order model central compositional experimental design.The simple calculation procedure is recommended in the case study.Also,a large number of examples using mathematical models obtained on the basis of the presented methodology are presented throughout the paper.