水田动力底盘逆向建模与质心验证——基于Geomagic Design X

针对目前农业机械仿真和优化模型精度不高的问题,提出了一种构建精确模型的逆向建模方法。应用光学扫描仪采集点云数据,基于Geomagic Design X处理点云数据并重构零部件模型,在SolidWorks中完成水田动力底盘的装配。以VP6D-CQ型水田动力底盘为例,将测得的实际质心位置与所建的模型质心位置进行比较,并对提出的逆向建模方法进行了试验验证以及误差分析。结果表明:总质量、x坐标、y坐标、z坐标的误差值分别为4.55%、3.62%、2.23%、4.81%,误差值均在5%内。此方法可构建准确的三维模型,为后续仿真优化数据精确性奠定了基础,与传统的研发相比较,可缩短农业机械研发周期、降低设计成本。

Design scheme for fast charging station for electric vehicles with distributed photovoltaic power generation

The demand for fast charging is increasing owing to the rapid expansion of the market for electric vehicles. In addition, the power generation technology for distributed photovoltaic has matured. This paper presents a design scheme for a fast charging station for electric vehicles equipped with distributed photovoltaic power generation system taking the area with certain conditions in Beijing as an example construction site. The technical indexes and equipment lectotype covering the general framework and subsystems of the charging station are determined by analyzing the charging service demand of fast charging stations. In this study, the layout of the station is developed and the operation benefits of the station is analyzed. The design scheme realizes the design objective of "rationalization, modularization and intelligentization" of the fast charging station and can be used as reference for the construction of a fast charging network in urban area.

RHOMBUS THINKING METHOD AND ITS APPLICATION IN SCHEME DESIGN

Rhombus thinking, a new creative thinking method,is the combination of divergent thinking process and convergent thinking process,in which qualitative analysis is carried out before quantitative analysis This method tries to solve the bottle neck problem in intelligent CAD based on the extension theory The rhombus thinking method to the scheme design of new products is applied In this process, firstly, the matter element expression for the know information are set up, and then a set of matter elements are opened up by matter elements extension method; Finally,the useful information are got by appraisal method of dependent degree It has been successfully applied to the scheme design for the cutter store of machining center Theoretical and experimental results demonstrated fhat the method is much more accurate,objective and efficient than the traditional one

App Designer辅助教学方法探索与实践——以软件无线电课程为例

软件无线电作为通信学科的必修课程,具有承上启下的重要作用。因课程原理抽象、理论公式复杂,学员在学习过程存在理解掌握难、实践应用难等问题。通过对当前软件无线电教学过程中存在的不足与困难进行分析,提出利用MATLAB App Designer辅助课程教学,从教学准备、课堂互动、自主实验、反馈提升四个方面开展课程教学改革。实践表明,该方法对于提升学员的工程思维、系统思维具有显著效果,同时可以增强学员理论联系实际的能力。

CONSTRUCTION OF OPTIMAL BLOCKING SCHEMES FOR ROBUST PARAMETER DESIGNS

Robust parameter design （RPD） is an important issue in experimental designs. If all experimental runs cannot be performed under homogeneous conditions, blocking the units is effective. In this paper, we obtain the correspondence relation between fractional factorial RPDs and the blocking schemes for full factorial RPDs. In addition, we provide a construction of optimal blocking schemes that make all main effects and control-by-noise two-factor interactions estimable.

Self-organized evolution of mechanism kinetic scheme based on axiomatic design

The self-organized evolution technology of the mechanism kinetic scheme based on axiomatic design is presented. This technology tries to express the constraints between kinetic mechanisms briefly in a semantic form which is more familiar to the designers. Through the mapping process between the kinetic chain unit and the unit instance, the evolution from abstract unit to concrete engineering instance is achieved. The subdivision of unit coupling semantics is studied, and the evolution of semantics is finished. Also, the semantic constraints evolution of unit coupling semantics is described. The product structure models with function and assembly meanings are constructed based on the kinematic chain unit and unit coupling. It provides a basis to realize the inheritance and transfer of constraint information from conceptual design to design for assembly （DFA）. As the engineering practice result shows, the method can help the engineers express their And the automation, recursion and design intension more clearly and naturally in a high semantic level. visualization of the mechanism kinetic scheme design are realized

An Identity-Based Strong Designated Verifier Proxy Signature Scheme

In a strong designated verifier proxy signature scheme, a proxy signer can generate proxy signature on behalf of an original signer, but only the designated verifier can verify the validity of the proxy signature. In this paper, we first define the security requirements for strong designated verifier proxy signature schemes. And then we construct an identity-based strong designated verifier proxy signature scheme. We argue that the proposed scheme satisfies all of the security requirements.

Design of Water Disinfection Scheme for Rural Drinking Water Safety Project

As further promotion of the rural drinking water safety project in whole country, small villages in vast countryside have been or will be equipped with safety drinking water project. We analyzed necessity of the rural drinking water disinfection, discussed disinfection method suitable for rural drinking water characteristics, and put forward disinfection schemes for different water supply sources.

Evaluating the conceptual design schemes of complex products based on FAHP using fuzzy number

In the conceptual design stage of complex products, CBR（Case-Based Reasoning） tool is useful to offer a feasible set of schemes. Then the most adaptive scheme can be generated through a procedure of comparison and evaluation. The procedure is essentially a multiple criteria decision-making problem. The traditional multiple criteria programming is not flexible enough in executing the system evaluation algorithm due to both the limited experimental data and the lack of human experiences. To make the CBR tool to be more efficient, a new method for the best choice among the feasible schemes based on the Fuzzy AHP using Fuzzy numbers （FFAHP） is proposed. Since the final results become a problem of ranking the mean of fuzzy numbers by the optimism of decision-maker using the FFAHP, its execution is much more intuitive and effective than with the traditional method.

Optimal Selection Model of Equipment Design Scheme Based on Set Pair Analysis

Selecting the optimal one from similar schemes is a paramount work in equipment design.In consideration of similarity of schemes and repetition of characteristic indices,the theory of set pair analysis(SPA)is proposed,and then an optimal selection model is established.In order to improve the accuracy and flexibility,the model is modified by the contribution degree.At last,this model has been validated by an example,and the result demonstrates the method is feasible and valuable for practical usage.

Design of process and control scheme for cyclohexanol production from cyclohexene using reactive distillation

Cyclohexanol is a commonly used organic compound.Currently,the most promising industrial process for synthesizing cyclohexanol,by cyclohexene hydration,suffers from a low conversion rate and difficult separation.In this paper,a three-column process for catalytic distillation applicable in the hydration of cyclohexene to cyclohexanol was established to solve these.Simulation with Aspen Plus shows that the process has good advantages,the conversion of cyclohexene reached 99.3%,and the product purity was>99.2%.The stable operation of the distillation system requires a good control scheme.The design of the control scheme is very important.However,at present,the reactive distillation process for cyclohexene hydration is under investigation experimentally and by steady-state simulation.Therefore,three different plant-wide control schemes were established(CS1,CS2,CS3) and the position of temperature sensitive stage was selected by using sensitivity analysis method and singular value decomposition method.The Tyreus-Luyben empirical tuning method was used to tune the controller parameters.Finally,Aspen Dynamics simulation software was used to evaluate the performance of the three control schemes.By introducing ΔF±20% and χ_(ENE)±5%,comparison the changes in product purity and yield of the three different control schemes.By comparison,we can see that the control scheme CS3 has the best performance.

A New D-optimal Design Scheme for the Identification of Cubic Polynomials

In this paper, the limitations of the single cube D-optimal design scheme is studied, and a double cube D-optimal design scheme is suggested in order to overcome the limitations. For a sort of incomplete cubic polynomials, the test design of the identification is developed with this new scheme, and the comparation with the single cube scheme is also given. This scheme is shown to be perfectly suitable for the optimal identification of the complete cubic polynomials.

Design strategy of intelligent CAD for welding positioner scheme design

Traditional CAD technique does not support the design processes such as function definition, conceptual design and preliminary design, which are most creative and play significant roles on the design quality. Because scheme design has close relationship with product structure, performance and technology cost, it is important for applying the intelligent CAD of scheme design to improve the quality and competitive level of the product. The definition and function of welding positioner are discussed in this paper. The new definition of welding positioner extends the research scope of welding positioner to welding fixture and welding positioning motion mechanism. The design process of welding fixture and positioning motion system is described, and the cased based and knowledge based design strategy of welding positioner scheme design intelligent CAD is then put forward, which lays foundation for developing proto type system of welding positioner scheme design.

Precoder Design and Impulsive Noise Mitigation Scheme for Industrial Wireless Communications

In industrial wireless scenarios,the impulsive noise(IN)incurred by machine running or operation causes a serious influence on the powerlimited industrial wireless communications.It is challenging to ensure efficient and reliable transmission with quality of service(QoS)guarantee for machinetype communication devices(MTCDs).Considering the IN in the industrial process,this paper establishes the multiuser multiple-input single-output(MU-MISO)orthogonal frequency division multiplexing(OFDM)system model,which combines transmitter and receiver design.Two precoding schemes are designed to improve communication effectiveness at the transmitter.More specifically,the precoder design scheme which combines semi-definite relaxation(SDR)with difference-of-two-convex-function(D.C.)iterative algorithm,is developed by utilizing the Dinkelbach method to improve the system effectiveness.To decrease the computational complexity,we devise the quadratic-based fractional programming(QFP)algorithm,which decouples the variables by using a quadratic transform method.On this basis,the IN mitigation scheme is studied to reduce the system error rate(SER)at the receiver.With the goal of improving the reliability of industrial wireless communications,we propose a hybrid nonlinear IN mitigation(HNINM)scheme and then derive its closed-form expression of SER.The simulation results show that the proposed QFP algorithm achieves superior performance while the HNINM scheme decreases the SER of industrial wireless communications.

Tight Relative 6-designs on Binary Hamming Association Schemes

The concept of relative t-designs for Q-polynomial association schemes is due to Delsarte(Philips Res Rep 32: 373C411, 1997). In this paper, we discuss the Fisher type lower bounds of tight relative 6-designs very explicitly for binary Hamming association schemes H(n, 2).

Automatic relational database compression scheme design based on swarm evolution

Compression is an intuitive way to boost the performance of a database system. However, compared with other physical database design techniques, compression consumes large amount of CPU power. There is a trade-off between the re- duction of disk access and the overhead of CPU processing. Automatic design and adaptive administration of database systems are widely demanded, and the automatic selection of compression schema to compromise the trade-off is very important. In this paper, we present a model with novel techniques to integrate a rapidly convergent agent-based evolution framework, i.e. the SWAF (SWarm Algorithm Framework), into adaptive attribute compression for relational database. The model evolutionally consults statistics of CPU load and IO bandwidth to select compression schemas considering both aspects of the trade-off. We have im- plemented a prototype model on Oscar RDBMS with experiments highlighting the correctness and efficiency of our techniques.

A New Codebook Design Scheme for Fast Beam Searching in Millimeter-Wave Communications

To overcome imperfection of exhaustive based beam searching scheme in IEEE 802.15.3c and IEEE 802.11 ad and accelerate the beam training process, combined with the fast beam searching algorithm previously proposed, this paper proposed a beam codebook design scheme for phased array to not only satisfy the fast beam searching algorithm's demand, but also make good use of the advantage of the searching algorithm. The simulation results prove that the proposed scheme not only performs well on flexibility and searching time complexity, but also has high success ratio.

Design and Analysis of Test Schemes of Static Postponing Time on Shrapnels Used to Riot Control

The test scheme of static postponing time given in our actual national military test standard on shrapnels used to control riot is a nine-point test scheme on the combined action of three kinds of temperatures and three kinds of pressures, the consumed ammunitions are more excessive. Statistic analysis and tentative checkout about a lot of test data are done, feasibility gists are put forward for optimizing of the test design scheme. The optimizing design and data analysis of test scheme of the item are done by managing uniformity design theory, two scientific and reasonable six-point test schemes are confirmed. The feasibility and reliability of the optimizing design schemes put forward above are proved ulteriorly by test validating. The gained schemes not only have good design uniformity and little ammunition wastage and meet the test demand, but also have better forecast ability for the result data of other points using the mathematic models from the actual test points.

Automatic Virtual Entity Simulation of Conceptual Design Results—Part Ⅱ:Symbolic Scheme Simulation

The development of new products of high quality, low unit cost, and short lead time to market are the key elements required for any enterprise to obtain a competitive advantage. This part of the paper presents a methodology to automatically simulate the conceptual design results in the virtual entity form. To the identified basic mechanisms, their kinematic analysis is carried out by matching basic Barranov trusses, and their virtual entities are modeled based on feature-based technique and encapsulated as one design object. Based on the structures of the basic mechanisms and their connections, a space layout to the mechanical system corresponding to the symbolic scheme is then fulfilled. With the preset-assembly approach, all parts in the mechanical system are put onto proper positions where the constraint equations are met according to the space layout results. In this way, the virtual entity assembly model of the mechanical system relative to the symbolic scheme is set up. The approach presented in this paper can not only obtain innovative conceptual conceptual design results, but also can evaluate their performances under 3-D enviroment efficently.