Schedule Model for Project Portfolio Based on Design Structure Matrix

To improve the enterprise resource utilization and shorten the cycle of the whole project portfolio, a scheduling model based on Design Structure Matrix （DSM） is built. By setting the project activity weight index system and calculating the activity weight for the project portfolio, the constraint relationship between project portfolio information and resource utilization, as the two dimensions of the DSM, are fully reflected in the sched- ule model to determine the order of these activities of project portfolio. A project portfolio example is given to il- lustrate the applicability and effectiveness of the schedule model.

Resistive switching behavior and mechanism of HfO_(x) films with large on/off ratio by structure design

Different bilayer structures of HfO_(x)/Ti(TiO_(x)) are designed for hafnium-based memory to investigate the switching characteristics. The chemical states in the films and near the interface are characterized by x-ray photoelectron spectroscopy,and the oxygen vacancies are analyzed. Highly improved on/off ratio(~104) and much uniform switching parameters are observed for bilayer structures compared to single layer HfO_(x) sample, which can be attributed to the modulation of oxygen vacancies at the interface and better control of the growth of filaments. Furthermore, the reliability of the prepared samples is investigated. The carrier conduction behaviors of HfO_(x)-based samples can be attributed to the trapping and de-trapping process of oxygen vacancies and a filamentary model is proposed. In addition, the rupture of filaments during the reset process for the bilayer structures occur at the weak points near the interface by the recovery of oxygen vacancies accompanied by the variation of barrier height. The re-formation of fixed filaments due to the residual filaments as lightning rods results in the better switching performance of the bilayer structure.

Design,preparation,application of advanced array structured materials and their action mechanism analyses for high performance lithium-sulfur batteries

Lithium-sulfur battery(LSB)has brought much attention and concern because of high theoretical specific capacity and energy density as one of main competitors for next-generation energy storage systems.The widely commercial application and development of LSB is mainly hindered by serious“shuttle effect”of lithium polysulfides(Li PSs),slow reaction kinetics,notorious lithium dendrites,etc.In various structures of LSB materials,array structured materials,possessing the composition of ordered micro units with the same or similar characteristics of each unit,present excellent application potential for various secondary cells due to some merits such as immobilization of active substances,high specific surface area,appropriate pore sizes,easy modification of functional material surface,accommodated huge volume change,enough facilitated transportation for electrons/lithium ions,and special functional groups strongly adsorbing Li PSs.Thus many novel array structured materials are applied to battery for tackling thorny problems mentioned above.In this review,recent progresses and developments on array structured materials applied in LSBs including preparation ways,collaborative structural designs based on array structures,and action mechanism analyses in improving electrochemical performance and safety are summarized.Meanwhile,we also have detailed discussion for array structured materials in LSBs and constructed the structure-function relationships between array structured materials and battery performances.Lastly,some directions and prospects about preparation ways,functional modifications,and practical applications of array structured materials in LSBs are generalized.We hope the review can attract more researchers'attention and bring more studying on array structured materials for other secondary batteries including LSB.

Optimization method of reef structure design based on hydrodynamic model

Artificial fish reef is a kind of artificial structure in water,which provides a necessary and safe place for aquatic life such as fish to inhabit,grow,and breed,and creates an environment suitable for fish growth,so as to protect and multiply fishery resources.In a large time scale,the physical process of sea area can deeply affect the chemical process and biological process,so the structure characteristics of artificial reef are the key factors affecting the flow field effect around the reef.In this study,through the hydrodynamic experiments of four kinds of reef models,including big windows box reef,big and small windows box reef,"(卐)"shaped reef and double-layer shellfish breeding reef,the influence of single reef structure on the flow field effect is analyzed,and the force conditions of different reefs under the same incoming current velocity are obtained.According to the simulation results,the safety research and calculation of five kinds of reef models are carried out,and the volumes of vortex area and upwelling area behind four kinds of reef are obtained.Using hydrodynamic model to simulate the flow field effect of reef area,optimizing the reef structure design,improving the maximum biological trapping and proliferation effect of reef,can provide theoretical guidance and scientific and technological support for the construction of reef area.

Design of a Novel Robotic Fish Structure Utilizing PVC Gel Actuators

In this research work, it has been designed a bionic robot fish structure, can swim underwater. The active compact body is powered by eight sets of symmetric PVC gel actuators with a caudal fin. The robot’s 200 mm-long, fish structure design incorporates a 55.52 angle to optimize the fish dynamics movement. It’s a fast and smooth operation and can swim. The robot can swim fast and quietly by using the right positions and the appropriate actuators on PVC gel actuators. This design entails a unique architecture that enables the robot to move safely and unobtrusively at the same time, which makes it suitable equipment for different exploration and surveillance missions in the water with speed and silent operation as the foremost concern.

Research on the Course of Principles of Concrete Structure Design

Nowadays,education and teaching have become a hot topic,and teaching in colleges and universities is facing a brand-new development direction.Principles of Concrete Structure Design,as one of the main courses,transmits professional knowledge for students,enhances the students’professional ability,and further carries out in-depth research on the course to bring a better teaching effect for students.The article mainly focuses on the research of the principles of concrete structure design course,conducts an analysis of the teaching characteristics of the principles of concrete structure design course,and reasonably sets the teaching content from the optimization of the course teaching objectives;innovative course teaching methods can deepen the effect of knowledge understanding;reform of experimental practice teaching can lay down the effect of the internalization of knowledge,etc.The in-depth description and discussion of the relevant aspects of the research aim to provide guidelines for related research.

Design and Engineering of Urban Interchange Ramp Bridge Structure

This paper analyzes the structural design of an urban interchange ramp bridge from four aspects,which are the superstructure,pier structure,foundation structure,and deck structure design to summarize the structural design ideas of this urban interchange ramp bridge,which can be used as a reference for future construction of the same bridge.

Durability zonation standard of concrete structure design

Durability zonation standard （DZS） is proposed to provide useful parameters for durable concrete structure design. It deals not only with the influence of environment on structures, but also with types, functions and importance of structures based on the theory of life cycle cost（LCC）. First, the basic concept of DZS for concrete structure design is defined. Then the basic principles for DZS are established. The factors for zonation according to natural environmental conditions and structural importance are identified. The usefulness of DZS by citing a real application for concrete highway bridges in Zhejiang Province is demonstrated. Finally, durability regulations are provided accordingly to zonation.

Integrated Assembly Structure Design Within Concurrent Engineering

Taking a microwave product as an example, a system of integrated assembly structure design is presented. Getting design constraints from the upstream design section through product data management(PDM), the system generates the assembly scheme using the case? based method, then assigns the design requirements into each component of the assembly. The detail design for each component can be performed under these design constraints. In order to practise concurrent design, the system sends the final design result to the upstream section and downstream section through PDM to achieve information sharing and integration.

Structure Design Considerations of a Sub-50nm Self-Aligned Double-Gate MOSFET

A comprehensive way to design a sub 50nm SADG MOSFET with the ability of being fabricated by improved CMOS technique is described.Under this way,the gate length and thickness of Si island of DG device show many different scaling limits for various elements.Meanwhile,the spacer insulator shows a kind of width thickness on device drain current and circuit speed.A model about that effect is developed and offers design consideration for future.A new design of channel doping profile,called SCD,is also discussed here in detail.The DG device with SCD can achieve a good balance between the volume inversion operation mode and the control of V th .Finally,a guideline to make a SADG MOSFET is presented.

Structure Design of Lower Limb Exoskeletons for Gait Training

Due to the close physical interaction between human and machine in process of gait training, lower limb exoskeletons should be safe, comfortable and able to smoothly transfer desired driving force/moments to the patients. Correlatively, in kinematics the exoskeletons are required to be compatible with human lower limbs and thereby to avoid the uncontrollable interactional loads at the human-machine interfaces. Such requirement makes the structure design of exoskeletons very difficult because the human-machine closed chains are complicated. In addition, both the axis misalignments and the kinematic character difference between the exoskeleton and human joints should be taken into account. By analyzing the DOF（degree of freedom） of the whole human-machine closed chain, the human-machine kinematic incompatibility of lower limb exoskeletons is studied. An effective method for the structure design of lower limb exoskeletons, which are kinematically compatible with human lower limb, is proposed. Applying this method, the structure synthesis of the lower limb exoskeletons containing only one-DOF revolute and prismatic joints is investigated; the feasible basic structures of exoskeletons are developed and classified into three different categories. With the consideration of quasi-anthropopathic feature, structural simplicity and wearable comfort of lower limb exoskeletons, a joint replacement and structure comparison based approach to select the ideal structures of lower limb exoskeletons is proposed, by which three optimal exoskeleton structures are obtained. This paper indicates that the human-machine closed chain formed by the exoskeleton and human lower limb should be an even-constrained kinematic system in order to avoid the uncontrollable human-machine interactional loads. The presented method for the structure design of lower limb exoskeletons is universal and simple, and hence can be applied to other kinds of wearable exoskeletons.

Multifunctional Perovskite Photodetectors: From Molecular-Scale Crystal Structure Design to Micro/Nano-scale Morphology Manipulation

Multifunctional photodetectors boost the development of traditional optical communication technology and emerging artificial intelligence fields, such as robotics and autonomous driving. However, the current implementation of multifunctional detectors is based on the physical combination of optical lenses, gratings, and multiple photodetectors, the large size and its complex structure hinder the miniaturization, lightweight, and integration of devices. In contrast, perovskite materials have achieved remarkable progress in the field of multifunctional photodetectors due to their diverse crystal structures, simple morphology manipulation, and excellent optoelectronic properties. In this review, we first overview the crystal structures and morphology manipulation techniques of perovskite materials and then summarize the working mechanism and performance parameters of multifunctional photodetectors. Furthermore, the fabrication strategies of multifunctional perovskite photodetectors and their advancements are highlighted, including polarized light detection, spectral detection, angle-sensing detection, and selfpowered detection. Finally, the existing problems of multifunctional detectors and the perspectives of their future development are presented.

Advances in the structure design of substrate materials for zinc anode of aqueous zinc ion batteries

Aqueous zinc ion batteries(AZIBs) demonstrate tremendous competitiveness and application prospects because of their abundant resources,low cost, high safety, and environmental friendliness. Although the advanced electrochemical energy storage systems based on zinc ion batteries have been greatly developed, many severe problems associated with Zn anode impede its practical application, such as the dendrite formation,hydrogen evolution, corrosion and passivation phenomenon. To address these drawbacks, electrolytes, separators, zinc alloys, interfacial modification and structural design of Zn anode have been employed at present by scientists. Among them, the structural design for zinc anode is relatively mature, which is generally believed to enhance the electroactive surface area of zinc anode, reduce local current density, and promote the uniform distribution of zinc ions on the surface of anode. In order to explore new research directions, it is crucial to systematically summarize the structural design of anode materials. Herein, this review focuses on the challenges in Zn anode, modification strategies and the three-dimensional(3D) structure design of substrate materials for Zn anode including carbon substrate materials, metal substrate materials and other substrate materials. Finally, future directions and perspectives about the Zn anode are presented for developing high-performance AZIBs.

A Hyper-redundant Elephant’s Trunk Robot with an Open Structure:Design,Kinematics,Control and Prototype

As for the complex operational tasks in the unstructured environment with narrow workspace and numerous obstacles,the traditional robots cannot accomplish these mentioned complex operational tasks and meet the dexterity demands.The hyper-redundant bionic robots can complete complex tasks in the unstructured environments by simulating the motion characteristics of the elephant’s trunk and octopus tentacles.Compared with traditional robots,the hyper-redundant bionic robots can accomplish complex tasks because of their flexible structure.A hyper-redundant elephant’s trunk robot(HRETR)with an open structure is developed in this paper.The content includes mechanical structure design,kinematic analysis,virtual prototype simulation,control system design,and prototype building.This design is inspired by the flexible motion of an elephant’s trunk,which is expansible and is composed of six unit modules,namely,3UPS-PS parallel in series.First,the mechanical design of the HRETR is completed according to the motion characteristics of an elephant’s trunk and based on the principle of mechanical bionic design.After that,the backbone mode method is used to establish the kinematic model of the robot.The simulation software SolidWorks and ADAMS are combined to analyze the kinematic characteristics when the trajectory of the end moving platform of the robot is assigned.With the help of ANSYS,the static stiffness of each component and the whole robot is analyzed.On this basis,the materials of the weak parts of the mechanical structure and the hardware are selected reasonably.Next,the extensible structures of software and hardware control system are constructed according to the modular and hierarchical design criteria.Finally,the prototype is built and its performance is tested.The proposed research provides a method for the design and development for the hyper-redundant bionic robot.

Design of structure and control system of semiconductor refrigeration box

In order to create low temperature environment for the valve testing,a new type of semiconductor refrigeration box based on semiconductor refrigeration chip and programmable logic controller(PLC)control system is designed.The power of the semiconductor refrigeration chip is determined by calculating the heat dissipation characteristics of the semiconductor refrigeration box.Combining natural convection heat dissipation with forced air cooling,the heat sink of semiconductor refrigeration chip is designed.In the control strategy,switch control is combined with an intelligent control strategy.Adaptive single neuron optimization algorithm based on quadratic optimization is adopted to adjust and optimize the parameters of the proportional-integral-derivative(PID)controllers in real time.Taking into account the limited hardware capabilities of the PLC,the Jacobian information in parameter adjustment is redesigned into a simplified form of identification.The actual test results of refrigeration box show good control performance.

STRUCTURE DESIGN OF THE BEIJING SPECTROMETERⅢBEAM PIPE

The Beijing spectrometer Ⅲ （BESⅢ） beam pipe is in the center of the BESⅢ, which is the detector of the upgrade project of Beijing electron and positron collider （BEPC Ⅱ）. Electrons and positrons collide in the BESⅢ beam pipe. According to the demands of the BEPC Ⅱ, a key program of Chinese Academy of Sciences, the BESⅢ beam pipe is designed based on the finite elements analysis. The BESIII beam pipe is installed in the inner cylinder of the BESⅢ drift chamber. As a vacuum tube, the BESIII beam pipe is designed as 1 000 mm in length, 63 mm in inner diameter and 114 mm in outer diameter, respectively. The BESIII beam pipe consists of a central beryllium pipe cooled by EDM-1, the oil No.1 for electric discharge machining, and two extended copper pipes cooled by deionized water （DW）. The three parts are jointed by vacuum welding. Factors taken into account in the design are as follows. ① The wall thickness of the central beryllium pipe should be designed as small as possible to reduce the multi-scattering and improve the particle momentum resolution. And the wall thickness of the extended copper pipe should be designed as large as possible to protect the detectors from the backgrounds. ②The BESⅢ beam pipe must be sufficiently cooled to avoid the damage and prevents its influence to the BESⅢ drift chamber （DC） operation. The inner surface temperature of the DC inner cylinder must be maintained at 293±2 K. ③ The magnetic permeability of the materials used in the BESⅢ beam pipe must be less than 1.05 H/m to avoid large magnetic field distortions. ④ The static pressure of the vacuum chamber of the BESⅢ beam pipe must be less than 800 μPa. The simulating results show that the designed structure of the BESⅢ beam pipe satisfies the requirements mentioned above. The structure design scheme is evaluated and adonted hv the headouarters of BEPCⅡ.

3D structure parameterization design and modeling for irregular structure of stope bottom

Stope mining design is a very important and complicated task in daily production design and technical management of an underground mine.Based on workface technology and human-computer interaction technology,this study introduces a method of 3D parametric design for the irregular structure of stope bottoms,and focuses on solving technical problems in surface modeling of stope bottom structure.Optimization of the minimum span length algorithm(MSLA) and the shortest path search algorithm(SPSA) is conducted to solve the problem of contour-line based instant modeling of stope bottom structures,which makes possible the 3D parametric design for irregular structure of stope bottom.Implementation process and relevant methods of the proposed algorithms are also presented.Feasibility and reliability of the proposed modeling method are testified in a case study.In practice,the proposed 3 D parameterization design method for irregular structure stope bottom proves to be very helpful to precise 3D parametric design.This method is capable of contributing to improved efficiency and precision of stope design,and is worthy of promotion.

Redundancy Measure and Its Application to the Design and Maintenance of Marine Structures

This paper is a survey of the state-of-the-art knowledge in structural redundancy measure and its application. The existing deterministic and probabilistic measures of structural redundancy are summarized. Emphasis is given to the discussion of their advantages and limitations. The application bf damage tolerance concept in the design and maintenance of marine structures is also reviewed. Some most critical problems in structural redundancy are proposed for future research.

An introduction to hull design practices for deepwater floating structures

The concepts of floating structure plays a very important role in deepwater projects; and the design of the floating structure is one of the most important tasks in the project. The importance of the floating structure in offshore projects can be demonstrated in the following several areas： the substantial dynamic structure responses due to wave loading and current loading; the limited motion requirements of risers in deep water; and the increasing difficulty of installation for different components of the system. Three major technical aspects have to be considered, i.e. the strength of structure, the fatigue resistance capacity of the system, and local and global stability of the structure. This paper reviews the current design practice of floating structures, evaluates the main tasks during the design and associated major technical requirements, and addresses the major technical challenges encountered during the design. As a close-out of the paper, the authors discuss some potential future developments in the design of floating structures.

Preliminary Design of a Submerged Support Structure for Floating Wind Turbines

Cost-effective floating wind turbines with efficient installations are highly desired in deep waters(>50 m).This paper presents a submerged floating offshore wind turbines(SFOWT)concept for intermediate water depths(50-200 m).The performance of SFOWTs can be improved through a judicious choice of configuration,pretension,and mooring line layout.Four SFOWTs with different configurations and a similar mass,named Cyl-4,Cub-4,Cyl-3,and Hex-3,were designed and analyzed.The responses of the four SFOWTs were predicted under operational condition and extreme condition.The results show that the four SFOWTs exhibited good performance under both conditions.The effect of platform configurations on power output was negligible under the operational condition.Under the extreme condition,among the four SFOWTs,the mean bending moments at the tower base were very close,while the maximum values differed by up to 21.5%,due to the configurations.The effect of wind-wave misalignment under the extreme condition was further analyzed.In general,the motion performances of the four-pontoon SFOWTs,Cyl-4 and Cub-4,were superior to those of the three-pontoon SFOWTs,Cyl-3 and Hex-3.Optimization studies of the mooring system were carried out on Cub-4 with different mooring line pretensions and four mooring layouts.The optimized Cub-4 could reduce the maximum motion responses in the surge,heave,and yaw by 97.7%,91.5%,and 98.7%,respectively.