Understanding the mechanical properties and multiscale failure mechanism of frozen soft rock is an important prerequisite for the construction safety of tunnels,artificially frozen ground and other infrastructure in c...Understanding the mechanical properties and multiscale failure mechanism of frozen soft rock is an important prerequisite for the construction safety of tunnels,artificially frozen ground and other infrastructure in cold regions.In this study,the triaxial compression test are performed on mudstone in the weakly cemented soft rock strata in the mining area of western China,and the mechanical characteristics and failure mechanism of weakly cemented mudstone are systematically investigated under the combined action of freezing and loading.Furthermore,the quantitative relationship between the microstructural parameters and the macroscopic strength and deformation parameters is established based on fractal theory.Thus,the failure mechanism of frozen weakly cemented mudstone is revealed on both micro- and macro-scales.The results show that temperature and confining pressure significantly affects the elastic modulus and peak strength of weakly cemented mudstone.With decreasing temperature,the compressive strength increases,while the corresponding peak strain decreases gradually.On the deformation curve,the plastic deformation stage is shortened,and the brittle fracture feature at the post-peak stage is more prominent,and the elastic modulus correspondingly increases with decreasing temperature.Under low-temperature conditions,most of the weakly cemented mudstone undergoes microscopic shear failure along the main fracture surface.The micro-fracture morphology characteristics of weakly cemented mudstone under different temperatures are quantified via the fractal dimension,and an approximately exponential relationship can be obtained among the fractal dimension and the temperature,compressive strength and elastic modulus.展开更多
The changes of crosslinking network of perfluorinated elastomer(FFKM)cured by TAIC and DBPH under thermo-oxidative aging conditions were investigated.Two competitive processes including post-curing and network destruc...The changes of crosslinking network of perfluorinated elastomer(FFKM)cured by TAIC and DBPH under thermo-oxidative aging conditions were investigated.Two competitive processes including post-curing and network destruction occur simultaneously,which directly affect the storage modulus and crosslinking density.With the increase of aging temperature,the network destruction becomes dominant.FTIR and XPS characterizations further reveal that the network destruction happens preferentially on the crosslink points of TAIC structure,and the post-curing is mainly caused by the decomposition of residual curing agent DBPH.Unlike the easier breaking of TAIC structure in the crosslinking network,both the backbone and the pendent groups of FFKM itself are much more stable.To further figure out the destruction mechanism,TGAFTIR-GC-MS test was also conducted and a schematic degradation process of TAIC structure was proposed.It is found that the destruction of TAIC crosslinking points happens first on the unstable exocyclic C―N bonds and the intermediate ring radicals could eventually decompose into volatile hydrogen isocyanate(HCNO)under extreme condition.展开更多
An analysis of polymer materials behavior under cutting forces load was presented.The analysis was accomplished taking into account the existence and interaction of micro cracks in material.On the basis of modeling re...An analysis of polymer materials behavior under cutting forces load was presented.The analysis was accomplished taking into account the existence and interaction of micro cracks in material.On the basis of modeling representations of a polymeric material behavior at cutting the method of preliminary mechanical destruction a superficial layer of polymeric material was developed.The essence of the method consists in producing micro-cracks in form of blind holes on the upper layer of blanks before turning.The aim of this method is a plastic deformation zones creation under stresses interaction occurring at the adjacent crack apexes.Results of experimental researches of fabric-based laminate turning processing according to the offered method were submitted.The analysis of the received results confirms expediency of application of the given combined method and the decrease of a roughness on the processed surface of fabric-based laminate is testifying about it.展开更多
The destruction of hexafluoroethane (C2F6), also known as R-116, was investigated in a nonthermal plasma reactor packed with dielectric pellets. The effects of the feed gas composition and the input power on the destr...The destruction of hexafluoroethane (C2F6), also known as R-116, was investigated in a nonthermal plasma reactor packed with dielectric pellets. The effects of the feed gas composition and the input power on the destruction of C2F6 were examined. The feed gas composition was varied by changing the oxygen content, the argon content and the initial C2F6 concentration. An increased input power led to increased C2F6 destruction as a result of promoting the electron-molecule collisions to dissociate C2F6 molecules. The addition of argon to the feed gas greatly improved the C2F6 destruction by reducing the energy losses due to vibrational excitation and dissociation of N2 molecules, while the increases in the oxygen content and the initial C2F6 concentration decreased the destruction efficiency. The byproducts including CO2, CO, COF2, CF4, SiF4, NO2, and N2O were identified, and the destruction mechanisms were elucidated, referring to these compounds. The most abundant byproduct was found to be carbonyl fluoride (COF2), indicating that it serves as an important medium to convert C2F6 into CO2. The energy requirement for the C2F6 destruction was in the range of 8.2–45.3 MJ/g, depending on the initial concentration.展开更多
基金funding support from Natural Science Foundation of Shandong Province(Grant No.ZR2021QE187).
文摘Understanding the mechanical properties and multiscale failure mechanism of frozen soft rock is an important prerequisite for the construction safety of tunnels,artificially frozen ground and other infrastructure in cold regions.In this study,the triaxial compression test are performed on mudstone in the weakly cemented soft rock strata in the mining area of western China,and the mechanical characteristics and failure mechanism of weakly cemented mudstone are systematically investigated under the combined action of freezing and loading.Furthermore,the quantitative relationship between the microstructural parameters and the macroscopic strength and deformation parameters is established based on fractal theory.Thus,the failure mechanism of frozen weakly cemented mudstone is revealed on both micro- and macro-scales.The results show that temperature and confining pressure significantly affects the elastic modulus and peak strength of weakly cemented mudstone.With decreasing temperature,the compressive strength increases,while the corresponding peak strain decreases gradually.On the deformation curve,the plastic deformation stage is shortened,and the brittle fracture feature at the post-peak stage is more prominent,and the elastic modulus correspondingly increases with decreasing temperature.Under low-temperature conditions,most of the weakly cemented mudstone undergoes microscopic shear failure along the main fracture surface.The micro-fracture morphology characteristics of weakly cemented mudstone under different temperatures are quantified via the fractal dimension,and an approximately exponential relationship can be obtained among the fractal dimension and the temperature,compressive strength and elastic modulus.
基金financial support from the National Natural Science Foundation of China (No. 51721091)the financial supports from the National Natural Science Foundation of China (Nos. 51873125 and 52073184)Research Foundation (International Program) of Science and Technology Department of Sichuan Province (No. 2019YFH0027)
文摘The changes of crosslinking network of perfluorinated elastomer(FFKM)cured by TAIC and DBPH under thermo-oxidative aging conditions were investigated.Two competitive processes including post-curing and network destruction occur simultaneously,which directly affect the storage modulus and crosslinking density.With the increase of aging temperature,the network destruction becomes dominant.FTIR and XPS characterizations further reveal that the network destruction happens preferentially on the crosslink points of TAIC structure,and the post-curing is mainly caused by the decomposition of residual curing agent DBPH.Unlike the easier breaking of TAIC structure in the crosslinking network,both the backbone and the pendent groups of FFKM itself are much more stable.To further figure out the destruction mechanism,TGAFTIR-GC-MS test was also conducted and a schematic degradation process of TAIC structure was proposed.It is found that the destruction of TAIC crosslinking points happens first on the unstable exocyclic C―N bonds and the intermediate ring radicals could eventually decompose into volatile hydrogen isocyanate(HCNO)under extreme condition.
文摘An analysis of polymer materials behavior under cutting forces load was presented.The analysis was accomplished taking into account the existence and interaction of micro cracks in material.On the basis of modeling representations of a polymeric material behavior at cutting the method of preliminary mechanical destruction a superficial layer of polymeric material was developed.The essence of the method consists in producing micro-cracks in form of blind holes on the upper layer of blanks before turning.The aim of this method is a plastic deformation zones creation under stresses interaction occurring at the adjacent crack apexes.Results of experimental researches of fabric-based laminate turning processing according to the offered method were submitted.The analysis of the received results confirms expediency of application of the given combined method and the decrease of a roughness on the processed surface of fabric-based laminate is testifying about it.
文摘The destruction of hexafluoroethane (C2F6), also known as R-116, was investigated in a nonthermal plasma reactor packed with dielectric pellets. The effects of the feed gas composition and the input power on the destruction of C2F6 were examined. The feed gas composition was varied by changing the oxygen content, the argon content and the initial C2F6 concentration. An increased input power led to increased C2F6 destruction as a result of promoting the electron-molecule collisions to dissociate C2F6 molecules. The addition of argon to the feed gas greatly improved the C2F6 destruction by reducing the energy losses due to vibrational excitation and dissociation of N2 molecules, while the increases in the oxygen content and the initial C2F6 concentration decreased the destruction efficiency. The byproducts including CO2, CO, COF2, CF4, SiF4, NO2, and N2O were identified, and the destruction mechanisms were elucidated, referring to these compounds. The most abundant byproduct was found to be carbonyl fluoride (COF2), indicating that it serves as an important medium to convert C2F6 into CO2. The energy requirement for the C2F6 destruction was in the range of 8.2–45.3 MJ/g, depending on the initial concentration.