Advances in Research of Collection and Detection Methods of Microplastics in Environment

As a new type of environmental pollutants,microplastics have gradually attracted people's attention.A large number of plastics discharged into the environment by human beings are constantly aging and breaking,and finally become microplastics.Microplastics can adsorb pollutants in the environment,and their components have certain toxicity,which can cause different degrees of harm to organisms.Due to the structural characteristics of microplastic particles,such as small particle size,large specific surface area,and their distribution in different environmental media,it is very difficult to accurately detect microplastics.Reliable collection and detection methods are the key to the study of environmental behavior of microplastics.In this study,the collection and detection methods of microplastics in the environment were reviewed,and the development direction of microplastics detection technology in the future was prospected.This study has a certain reference value for the related research and the prevention and treatment of micro-plastic pollution.

Effects of Standing Time during Pretreatment on the Nitrite Concentration Detected by Spectrophotometric Method

Food safety problems caused by excessive nitrite addition have been frequently reported and the detection of nitrite in food is particularly important. The standing time during the pretreatment of primary sample has a great influence on the concentration of nitrite tested by spectrophotometric method. In this context, three kinds of food samples are prepared, including canned mustard, canned fish and home-made pickled water. A series of standing times are placed during the sample pretreatments and the corresponding nitrite contents in these samples are detected by spectrophotometric method based on N-ethylenediamine dihydrochloride. This study aims to find out a reasonable standing time during the pretreatment of food sample, providing influence factor for precise detection of nitrite.

Discussion on the application prospect of the transient electromagnetic method based on the dual launcher and mine advanced detection

The dual transmitter implements the equivalent anti-magnetic flux transient electromagnetic method, which can effectively reduce the scope of the transient electromagnetic detection blind area. However, this method is rarely reported in the detection of pipelines in urban geophysical exploration and the application of coal mines. Based on this, this paper realizes the equivalent anti-magnetic flux transient electromagnetic method based on the dual launcher. The suppression effect of this method on the blind area is analyzed by physical simulation. And the detection experiment of underground pipelines is carried out outdoors. The results show that the dual launcher can significantly reduce the turn-off time, thereby effectively reducing the impact of the blind area on the detection results, and the pipeline detection results verify the device’s effectiveness. Finally, based on the ground experimental results, the application prospect of mine advanced detection is discussed. Compared with other detection fields, the formation of blind areas is mainly caused by the equipment. If the dual launcher can be used to reduce the blind area, the accuracy of advanced detection can be improved more effectively. The above research results are of great significance for improving the detection accuracy of the underground transient electromagnetic method.

Application Research of Sonar Detection Method in Melting Exploration at the Bottom of Piles

Karst landforms are widely distributed in China,and are most common in Yunnan,Guizhou and Guangxi.If the development of karst caves at the bottom of the piles cannot be accurately ascertained before the construction of bridge pile foundations,accidents such as hole collapse,slurry leakage,and drill sticking will easily occur.In this paper,the principle and method of sonar detection for detecting karst caves at the bottom of bridge piles was introduced,and the sonar detection data and the cave situation at the bottom of the pile during the construction process in combination with the case of Yunnan Zhenguo Highway Project was analyzed,which verifies the practicability and reliability of sonar detection method reliability.

Efficient People Detection with Infrared Images

This work focuses on the problem of monitoring the coastline, which in Portugal’s case means monitoring 3007 kilometers, including 1793 maritime borders with the Atlantic Ocean to the south and west. The human burden on the coast becomes a problem, both because erosion makes the cliffs unstable and because pollution increases, making the fragile dune ecosystem difficult to preserve. It is becoming necessary to increase the control of access to beaches, even if it is not a popular measure for internal and external tourism. The methodology described can also be used to monitor maritime borders. The use of images acquired in the infrared range guarantees active surveillance both day and night, the main objective being to mimic the infrared cameras already installed in some critical areas along the coastline. Using a series of infrared photographs taken at low angles with a modified camera and appropriate filter, a recent deep learning algorithm with the right training can simultaneously detect and count whole people at close range and people almost completely submerged in the water, including partially visible targets, achieving a performance with F1 score of 0.945, with 97% of targets correctly identified. This implementation is possible with ordinary laptop computers and could contribute to more frequent and more extensive coverage in beach/border surveillance, using infrared cameras at regular intervals. It can be partially automated to send alerts to the authorities and/or the nearest lifeguards, thus increasing monitoring without relying on human resources.

Establishment of Reverse-transcription Loopmediated Isothermal Amplification Method for Detection of Wheat Streak Mosaic Virus

A reverse-transcription loop-mediated isothermal amplification （RT-LAMP） method was established for the detection of wheat streak mosaic virus （WSMV）. Ac-cording to the conservative regions of the genes that encode the coat protein of WSMV, 2 pairs of primers were designed. Final y, the 1st pair of primers was select-ed through the specificity test. The sensitivity test showed the sensitivity of RT-LAMP method was 10 times higher than that of RT-PCR. In addition, the amplifica-tion of target gene could be judged visual y from the presence of fluorescence （cal-cein） in the final reaction system. The RT-LAMP method, established in this study, was rapid, easy, specific and sensitive. Moreover, it did not require sophisticated equip-ment. The RT-LAMP was suitable for the rapid detection of WSMV.

Application of a real-time PCR method for detecting and monitoring hookworm Necator americanus infections in Southern China

Objective:To develop a quautitative PCR method for detecting hookworm infection and quantification.Methods:A real-time PCR method was designed hased on the intergenic regionⅡof ribosomal DNA of the hookworm Neeator americanus.The deteetion limit of this method was compared with the microscopy-hased Kato-Katz method.The real-time PCR method was used to conduct an epidemiological survey of hookworm infection in southern Fujian Province of China.Result:The real-time PCR method was specific for detecting Necator americanus infection,and was more sensitive than conventional PCR or microscopy-based method.A preliminary survey for hookworm infection in villages of Fujian Province confirmed the high prevalence of hnokworm infections in the resident populations.In addition,the infection rate in women was significantly higher than thai of in men.Conclusions:A real-time PCR method is designed,which has increased detection sensitivity for more accurate epidemiological studies of hookworm infections,especially when intensity of the infection needs to he considered.

Methods to detect a vian influenza virus for food safety surveillance

Avian influenza （AI）, caused by the influenza A virus, has been a global concern for public health. AI outbreaks not only impact the poultry production, but also give rise to a risk in food safety caused by viral contamination of poultry products in the food supply chain. Distinctions in AI outbreak between strains H5N1 and H7N9 indicate that early detection of the AI virus in poultry is crucial for the effective warning and control of AI to ensure food safety. Therefore, the establishment of a poultry surveillance system for food safety by early detection is urgent and critical. In this article, methods to detect AI virus, including current methods recommended by the World Health Organization （WHO） and the World Organisation for Animal Health （Office International des Epizooties, OIE） and novel techniques not commonly used or commercialized are reviewed and evaluated for feasibility of use in the poultry surveillance system. Conventional methods usually applied for the purpose of AI diagnosis face some practical challenges to establishing a comprehensive poultry surveillance program in the poultry supply chain. Diverse development of new technologies can meet the specific requirements of AI virus detection in various stages or scenarios throughout the poultry supply chain where onsite, rapid and ultrasensitive methods are emphasized. Systematic approaches or integrated methods ought to be employed according to the application scenarios at every stage of the poultry supply chain to prevent AI outbreaks.

Blind detection of liquefaction by existing methods for New Zealand M_L6.3 earthquake on Feb. 22,2011

Real-time liquefaction monitoring and warning techniques are new ways to mitigate liquefaction hazard. A key point is to establish a reverse liquefaction detection method based on seismic records. However, the existing methods are quite limited and the reliability requires verification. On Feb. 22, 2011 an earthquake of magnitude 6.3 struck at New Zealand＇s South Island. Remarkable liquefaction phenomena were reported, which provide an opportunity to verify the existing liquefaction detection methods. 27 acceleration records within 50 km to the epicenter were selected to perform a blind detection by using the existing methods, including Miyajima method, Suzuki method, Kostadinov-Yamazaki method and Yuan-Sun method. The blind detection results indicate that Yuan-Sun method gives correct results for seven confirmed sites, and Suzuki method and Yuan-Sun method yield correct detection for a reported non-liquefied site. Four methods including the Yuan-Sun method give identical detection for four sites and three methods also including the Yuan-Sun method give identical detection for ten sites. Besides, there are five sites, for which the four methods give opposite detection.

Evaluation of multiple surface irradiance-based clear sky detection methods at Xianghe—A heavy polluted site on the North China Plain

Surface irradiance measurements with high temporal resolution can be used to detect clear skies,which is a critical step for further study,such as aerosol and cloud radiative effects.Twenty-one clear-sky detection(CSD)methods are assessed based on five years of 1-min surface irradiance data at Xianghe—a heavily polluted station on the North China Plain.Total-sky imager(TSI)discrimination results corrected by manual checks are used as the benchmark for the evaluation.The performance heavily relies on the criteria adopted by the CSD methods.Those with higher cloudy-sky detection accuracy rates produce lower clear-sky accuracy rates,and vice versa.A general tendency in common among all CSD methods is the detection accuracy deteriorates when aerosol loading increases.Nearly all criteria adopted in CSD methods are too strict to detect clear skies under polluted conditions,which is more severe if clear-sky irradiance is not properly estimated.The mean true positive rate(CSD method correctly detects clear sky)decreases from 45%for aerosol optical depth(AOD)≤0.2%to 6%for AOD>0.5.The results clearly indicate that CSD methods in a highly polluted region still need further improvements.

Application of Compactness Detection to Complicated Concrete-Filled Steel Tube by Ultrasonic Method

An example of using ultrasonic method to detect the compactness of complicated concrete-filled steel tube in certain high-rise building was discussed in this study.Because of the particularity of the complicated concrete-filled steel tubular column,the plane detection method and embedded sounding pipe method were adopted in the process of effectively detecting the column.According to the results of the plane detection method and embedded sounding pipe method,the cementing status of steel tube and concrete can be concluded,which cannot be judged by the hammering method in the rectangular steel tube-reinforced concrete.

Toxicology,biosynthesis,bio-control of aflatoxin and new methods of detection

Mycotoxins and their derivatives since their discoveries and until the present time are behind unspecified economic and medical damages.Aflatoxins are classified according to their physical–chemical and toxicological characters in the most dangerous row of the mycotoxins.These aflatoxins are in part responsible,of irreversible medical disasters that are not easily manageable such as cancer of the liver and kidneys,and in the other part,of losses in the stored cereal products.Based on these crucial findings,monitoring of this toxin became imperative in post-harvest food products,during storage,during transformation chain and even during the long phases of conservation.Vigilance of this toxin is delivered by detection methods using very advanced technologies to respond in the shortest possible times.In addition,the knowledge of factors supporting the biosynthesis of aflatoxins such as the temperature,moisture content,concentration of nitrogen and carbon,and the molecules responsible for the genetic control of the synthesis will be reflected later in the choice of bio-control techniques.This control is currently based on new strategies using the bioactives substances of the plants,the lactic bacteria and some strains of actinomycetes that have good inhibiting activity against aflatoxins with fewer side effects on Man.On the other hand,this brief review summarizes the results of new studies demonstrating the toxicity of the toxin,new detection methods and bio-control.

Variations of mesoscale eddy SST fronts based on an automatic detection method in the northern South China Sea

SST fronts at the mesoscale eddy edge(ME fronts)were investigated from 2007–2017 in the northern South China Sea(NSCS)based on an automatic method using satellite sea level anomaly(SLA)and SST data.The relative probabilities between the number of anticyclonic/cyclonic ME fronts(AEF/CEF)and the number of anticyclones/cyclones reached 20%.The northeastern and southwestern parts of these anticyclones had more fronts than the northwestern and southeastern parts,although CEFs were nearly equally distributed in all directions.The number of ME fronts had remarkable seasonal variations,while the eddy kinetic energy(EKE)showed no seasonal variations.The total EKE at the ME fronts was three times of that within the MEs,and it was much stronger in AEFs than in CEFs.The interannual variability in the number of ME fronts and EKE had no significant correlation with the El Ni?o-Southern Oscillation(ENSO)index.Possible mechanisms of ME fronts were discussed,but the contributions of mesoscale eddies to SST fronts need to be quantified in future studies.

A method and device for online magnetic resonance multiphase flow detection

Most multiphase flow separation detection methods used commonly in oilfields are low in efficiency and accuracy,and have data delay.An online multiphase flow detection method is proposed based on magnetic resonance technology,and its supporting device has been made and tested in lab and field.The detection technology works in two parts:measure phase holdup in static state and measure flow rate in flowing state.Oil-water ratio is first measured and then gas holdup.The device is composed of a segmented magnet structure and a dual antenna structure for measuring flowing fluid.A highly compact magnetic resonance spectrometer system and intelligent software are developed.Lab experiments and field application show that the online detection system has the following merits:it can measure flow rate and phase holdup only based on magnetic resonance technology;it can detect in-place transient fluid production at high frequency and thus monitor transient fluid production in real time;it can detect oil,gas and water in a full range at high precision,the detection isn’t affected by salinity and emulsification.It is a green,safe and energy-saving system.

Determination of Fructose and Glucose Contents in Honey by Liquid Chromatography-refractive Index Detection Method and Direct Titration Method

In this study, fructose and glucose contents in honey were determined by liquid chromatography-refractive index detection method and alkaline copper tartrate solution-direct titration method. According to the results, there were great differences between determination results of reducing sugar contents by liquid chromatography-refractive index detection method and alkaline copper tartrate solution-direct titration method. Specifically, average determination results of reducing sugar contents by liquid chromatography-refractive index detection method were reduced by about 9.5% compared with alkaline copper tartrate solution-direct titra- tion method. Subsequently, determination results of reducing sugar contents by two methods were compared and analyzed. Liquid chromatography-refractive index detection method was used to determine fructose and glucose monomers in honey, but alkaline copper tartrate solution-direct titration method was used to determine reducing sugar composition in honey, which might lead to significantly different results. Due to small sample size and limited conditions, the determination results were not necessarily representative. Bee product acquisition and processing enterprises and relevant departments should pay much attention on these issues and fully consider the current situation of grass-roots units to develop scientific, rigorous, simple, universal, convenient, low-cost and practicable standards, thus ensuring the safety and reliability of food quality.

Planning method for AUV region detection under ocean current

In this paper we present two strategies of AUV (Autonomous Underwater Vehicle) region detection and an approach to decompose the detection region according to the direction of the ocean current. In the task of local detection and identification, the algorithm against the ocean current was proposed. In the tasks of closing obstacle, going back or moving, the fuzzy logic theory was used to solve the effect of ocean current. In one of our strategies the concept of weighted journey based on the angle between heading and ocean current is suggested and the TSP's exact optimal result is utilized to solve the global path planning. Simulations demonstrate the feasibility of this approach.

Improvement Detecting Method of Optical Axes Parallelism of Shipboard Photoelectrical Theodolite Based on Image Processing

An improvement detecting method was proposed according to the disadvantages of testing method of optical axes parallelism of shipboard photoelectrical theodolite (short for theodolite) based on image processing. Pointolite replaced 0.2'' collimator to reduce the errors of crosshair images processing and improve the quality of image. What’s more, the high quality images could help to optimize the image processing method and the testing accuracy. The errors between the trial results interpreted by software and the results tested in dock were less than 10'', which indicated the improve method had some actual application values.

A method for detecting the breaking of wind-generated waves in deep water

The breaking of wind-generated waves is an important phenomenon in the ocean, having close relation to many aspects of the ocean, such as air-sea interaction, ocean wave dynamics, oceanic remote sensing and ocean engineering. The first problem encountered in both its theoretical study and practical measurement is how to detect the breaking of waves.

Application of Dynamic Linear Detecting Method in Data Processing of the Portable Blood Sugar Analyzer

In this paper,a dynamic linear detecting method,that the non-linear coefficient NL% was led and the non-linearity of data were estimated continuously and dynamically and determined when NL% exceeded reference value (5%),was used for data processing and could solve the problem caused by the phenomenon of substrate depleting occurred following the redox reaction in portable blood sugar analyzer.By contrast to the conventional end-point method,the dynamic linear detecting method is based on multipoint data collecting.Experiments of measuring the calibration glucose solution with 8 various concentrations from 50 mg/dl to 400 mg/dl were carried out with the analyzer developed by our group.The linear regression curve,whose correlation for the data was 0.9995 and the residual was 2.8080,were obtained.The obtained correlation,residual, and the computation workload are all fit for the portable blood sugar analyzer.

GC-MS STUDY ON DIURETICS IN URINE Ⅱ.DETECTION METHOD USING TRIMETHYLSILYLATION

A reliable method is described for the detection of amitoride,triamterene. canrenone and spironolactone in human urine using GC-MS analysis after trimethytsitytation.The mass spectrometric and metabotic features of the compounds are discussed