期刊文献+
共找到273,891篇文章
< 1 2 250 >
每页显示 20 50 100
Efficacy of fexuprazan compared with rebamipide in Korean patients with gastritis:A matching-adjusted indirect comparison
1
作者 Gwang Ha Kim Hang Lak Lee 《World Journal of Clinical Cases》 SCIE 2024年第19期3890-3897,共8页
BACKGROUND Gastritis is one of the most frequently diagnosed diseases requiring medical treatment in South Korea.Fexuprazan,a novel potassium-competitive acid blocker,has been approved for treating gastritis and erosi... BACKGROUND Gastritis is one of the most frequently diagnosed diseases requiring medical treatment in South Korea.Fexuprazan,a novel potassium-competitive acid blocker,has been approved for treating gastritis and erosive esophagitis.Meanwhile,rebamipide is the most commonly used mucoprotective agent for acute and chronic gastritis in real-world settings in South Korea.However,there have been no studies comparing the efficacy of these two drugs yet.AIM To compare the efficacy of fexuprazan with that of rebamipide for acute and chronic gastritis.METHODS This was a matching-adjusted indirect comparison.Individual patient data from a phase III study of fexuprazan(10 mg BID)were compared with cumulative data from two matching studies of rebamipide(100 mg TID).Erosion improvement and healing rates were compared between two weeks of fexurapan,two weeks of rebamipide,and four weeks of rebamipide.The two main outcome variables were presented as percentages,and the risk differences(RD)and 95%confidence intervals(CI)were calculated for the relative treatment effects.RESULTS In the primary analysis,the erosion improvement and healing rates after a twoweek treatment with fexuprazan were 64.5%and 53.2%,respectively,while a twoweek treatment with rebamipide resulted in erosion improvement and healing rates of 43.6%(RD:21.0%;95%CI:9.6-32.3;P<0.01)and 35.6%(RD:17.6%;95%CI:6.1-29.2;P=0.003),respectively.In the additional analysis,the erosion improvement and healing rates for the two-week fexuprazan treatment(64.2%and 51.2%,respectively)were similar to those obtained during a four-week treatment with rebamipide(60.6%;RD:3.6%;95%CI:-9.8,17.0;P=0.600 and 53.5%;RD:-2.3%;95%CI:-16.1,11.5;P=0.744,respectively).CONCLUSION The two-week fexuprazan treatment was superior to the two-week rebamipide treatment and similar to the fourweek rebamipide treatment for patients with gastritis. 展开更多
关键词 GASTRITIS Erosive gastritis Fexuprazan REBAMIPIDE Matching-adjusted indirect comparison Indirect treatment comparison
下载PDF
Accuracy comparison and improvement for state of health estimation of lithium-ion battery based on random partial recharges and feature engineering
2
作者 Xingjun Li Dan Yu +1 位作者 Søren Byg Vilsen Daniel Ioan Stroe 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第5期591-604,共14页
State of health(SOH)estimation of e-mobilities operated in real and dynamic conditions is essential and challenging.Most of existing estimations are based on a fixed constant current charging and discharging aging pro... State of health(SOH)estimation of e-mobilities operated in real and dynamic conditions is essential and challenging.Most of existing estimations are based on a fixed constant current charging and discharging aging profiles,which overlooked the fact that the charging and discharging profiles are random and not complete in real application.This work investigates the influence of feature engineering on the accuracy of different machine learning(ML)-based SOH estimations acting on different recharging sub-profiles where a realistic battery mission profile is considered.Fifteen features were extracted from the battery partial recharging profiles,considering different factors such as starting voltage values,charge amount,and charging sliding windows.Then,features were selected based on a feature selection pipeline consisting of filtering and supervised ML-based subset selection.Multiple linear regression(MLR),Gaussian process regression(GPR),and support vector regression(SVR)were applied to estimate SOH,and root mean square error(RMSE)was used to evaluate and compare the estimation performance.The results showed that the feature selection pipeline can improve SOH estimation accuracy by 55.05%,2.57%,and 2.82%for MLR,GPR and SVR respectively.It was demonstrated that the estimation based on partial charging profiles with lower starting voltage,large charge,and large sliding window size is more likely to achieve higher accuracy.This work hopes to give some insights into the supervised ML-based feature engineering acting on random partial recharges on SOH estimation performance and tries to fill the gap of effective SOH estimation between theoretical study and real dynamic application. 展开更多
关键词 Feature engineering Dynamic forklift aging profile State of health comparison Machine learning Lithium-ion batteries
下载PDF
Efficacy comparison of multipoint and single point scanning panretinal laser photocoagulation in non-proliferative diabetic retinopathy treatment
3
作者 Yang-Zhou Zhang Hua Gong +2 位作者 Juan Yang Ji-Pu Bu Hui-Ling Yang 《World Journal of Diabetes》 SCIE 2024年第8期1734-1741,共8页
BACKGROUND Non-proliferative diabetic retinopathy(NPDR)poses a significant challenge in diabetes management due to its microvascular changes in the retina.Laser photocoagulation,a conventional therapy,aims to mitigate... BACKGROUND Non-proliferative diabetic retinopathy(NPDR)poses a significant challenge in diabetes management due to its microvascular changes in the retina.Laser photocoagulation,a conventional therapy,aims to mitigate the risk of progressing to proliferative diabetic retinopathy(PDR).AIM To compare the efficacy and safety of multi-spot vs single-spot scanning panretinal laser photocoagulation in NPDR patients.METHODS Forty-nine NPDR patients(86 eyes)treated between September 2020 and July 2022 were included.They were randomly allocated into single-spot(n=23,40 eyes)and multi-spot(n=26,46 eyes)groups.Treatment outcomes,including bestcorrected visual acuity(BCVA),central macular thickness(CMT),and mean threshold sensitivity,were assessed at predetermined intervals over 12 months.Adverse reactions were also recorded.RESULTS Energy levels did not significantly differ between groups(P>0.05),but the multi-spot group exhibited lower energy density(P<0.05).BCVA and CMT improvements were noted in the multi-spot group at one-month posttreatment(P<0.05).Adverse reaction incidence was similar between groups(P>0.05).CONCLUSION While energy intensity and safety were comparable between modalities,multi-spot scanning demonstrated lower energy density and showed superior short-term improvements in BCVA and CMT for NPDR patients,with reduced laser-induced damage. 展开更多
关键词 Panretinal laser photocoagulation Non-proliferative diabetic retinopathy Efficacy comparison Multipoint Single point Treatment assessment
下载PDF
Global Research Progress on Municipal Waste and Future Prospect Based on the Cross-national Comparisons
4
作者 ZHANG Yuxin LIU Xiaoqian +2 位作者 YAN Xiaoxia MA Sike MAO Weiyun 《Chinese Geographical Science》 SCIE CSCD 2024年第2期250-264,共15页
Due to the acceleration of urbanization,the municipal waste(MW)problem has transformed into a global challenge for urb-an sustainability.To elucidate historical trends,current focal points,and future directions in MW ... Due to the acceleration of urbanization,the municipal waste(MW)problem has transformed into a global challenge for urb-an sustainability.To elucidate historical trends,current focal points,and future directions in MW research,we conducted a bibliometric analysis and employed knowledge graph visualization to scrutinize a total of 34212 articles,which were published between 1991 and 2021 in the Web of Science(WoS)core database.The results indicated that current major research themes encompass waste classifica-tion and recycling,waste management and public behavior,waste disposal methods and technologies,as well as environmental impact and evaluation.There has been a shift in the research focus from the environmental impacts of waste incineration to sustainable manage-ment related issues.A comparison of research from six typical countries revealed the differences in research priorities and techniques advantages.Scholars from the USA and Britain initiated MW research earlier than other countries and investigated management issues in depth,such as public behavior and willingness to pay.Meanwhile,Japanese,German,and Swedish scholars conducted extensive studies on advanced waste treatment technologies,such as disposal and recycling,risk assessment,and waste-to-energy techniques.Chinese scholars placed particular emphasis on end-of-pipe treatments and their associated environmental impacts.Hotspots and poten-tial future frontiers were identified by burst detection analysis.Keywords with high value of burst index(BI)worldwide are food waste and circular economy.Chinese scholars have put great efforts on waste environmental impact and its recycling technologies,while we’re expecting to further investigating vulnerable population.Furthermore,this study contributes to bridging the regional gap of scientific research among different countries and fostering international collaboration. 展开更多
关键词 BIBLIOMETRICS municipal waste(MW) CiteSpace hotspot prediction burst index(BI) SUSTAINABILITY cross-national comparison Web of Science(WoS)
下载PDF
Direct Pointwise Comparison of FE Predictions to StereoDIC Measurements:Developments and Validation Using Double Edge-Notched Tensile Specimen
5
作者 Troy Myers Michael A.Sutton +2 位作者 Hubert Schreier Alistair Tofts Sreehari Rajan Kattil 《Computer Modeling in Engineering & Sciences》 SCIE EI 2024年第8期1263-1298,共36页
To compare finite element analysis(FEA)predictions and stereovision digital image correlation(StereoDIC)strain measurements at the same spatial positions throughout a region of interest,a field comparison procedure is... To compare finite element analysis(FEA)predictions and stereovision digital image correlation(StereoDIC)strain measurements at the same spatial positions throughout a region of interest,a field comparison procedure is developed.The procedure includes(a)conversion of the finite element data into a triangular mesh,(b)selection of a common coordinate system,(c)determination of the rigid body transformation to place both measurements and FEA data in the same system and(d)interpolation of the FEA nodal information to the same spatial locations as the StereoDIC measurements using barycentric coordinates.For an aluminum Al-6061 double edge notched tensile specimen,FEA results are obtained using both the von Mises isotropic yield criterion and Hill’s quadratic anisotropic yield criterion,with the unknown Hill model parameters determined using full-field specimen strain measurements for the nominally plane stress specimen.Using Hill’s quadratic anisotropic yield criterion,the point-by-point comparison of experimentally based full-field strains and stresses to finite element predictions are shown to be in excellent agreement,confirming the effectiveness of the field comparison process. 展开更多
关键词 StereoDIC spatial co-registration data transformation finite element simulations point-wise comparison of measurements and FEA predictions double edge notch specimen model validation
下载PDF
Revisiting the standards of cancer detection and therapy alongside their comparison to modern methods
6
作者 Piotr Gromek Zuzanna Senkowska +7 位作者 Elzbieta Pluciennik Zbigniew Pasieka Lin-Yong Zhao Adrianna Gielecinska Mateusz Kciuk Karol Klosinski Zaneta Kaluzinska-Kolat Damian Kolat 《World Journal of Methodology》 2024年第2期17-37,共21页
In accordance with the World Health Organization data,cancer remains at the forefront of fatal diseases.An upward trend in cancer incidence and mortality has been observed globally,emphasizing that efforts in developi... In accordance with the World Health Organization data,cancer remains at the forefront of fatal diseases.An upward trend in cancer incidence and mortality has been observed globally,emphasizing that efforts in developing detection and treatment methods should continue.The diagnostic path typically begins with learning the medical history of a patient;this is followed by basic blood tests and imaging tests to indicate where cancer may be located to schedule a needle biopsy.Prompt initiation of diagnosis is crucial since delayed cancer detection entails higher costs of treatment and hospitalization.Thus,there is a need for novel cancer detection methods such as liquid biopsy,elastography,synthetic biosensors,fluorescence imaging,and reflectance confocal microscopy.Conventional therapeutic methods,although still common in clinical practice,pose many limitations and are unsatisfactory.Nowadays,there is a dynamic advancement of clinical research and the development of more precise and effective methods such as oncolytic virotherapy,exosome-based therapy,nanotechnology,dendritic cells,chimeric antigen receptors,immune checkpoint inhibitors,natural product-based therapy,tumor-treating fields,and photodynamic therapy.The present paper compares available data on conventional and modern methods of cancer detection and therapy to facilitate an understanding of this rapidly advancing field and its future directions.As evidenced,modern methods are not without drawbacks;there is still a need to develop new detection strategies and therapeutic approaches to improve sensitivity,specificity,safety,and efficacy.Nevertheless,an appropriate route has been taken,as confirmed by the approval of some modern methods by the Food and Drug Administration. 展开更多
关键词 Cancer detection Liquid biopsy Synthetic biosensors Fluorescence imaging Reflectance confocal microscopy ELASTOGRAPHY Cancer therapy Tumor-treating fields Oncolytic virotherapy NANOTECHNOLOGY
下载PDF
Development of a Comparison Based Hotel and Resort Booking System in Bangladesh
7
作者 Md. Sajjad Mahmud Khan Sajjad Kashem Mohammad Monirujjaman Khan 《Journal of Software Engineering and Applications》 2021年第5期133-149,共17页
<span style="font-family:Verdana;">With the rise of population and the industrial revolution, it is obvious that hotels and resorts are increasing drastically day by day. In the 21st century, tourism i... <span style="font-family:Verdana;">With the rise of population and the industrial revolution, it is obvious that hotels and resorts are increasing drastically day by day. In the 21st century, tourism is a trend. Everyone loves to travel and the reasons vary from person to person. Whether it is to have a cheerful and peaceful mind and place or business purposes, either way, hotels and resorts actually doing their jobs very well. This, tourism is a promising sector for any country and Bangladesh is no different. But the problem is we have to do the hotel booking and reservation manually most of the time. Sometimes it is too troublesome and knowing about the suitable hotels and resorts is too difficult. Though there are some online platforms available, they are not our country-oriented such as the payment system is not preferable for us. To solve this problem Vhromon is developed, a comparison-based hotel and resort booking system where anyone can book a hotel or resort by just login from the internet. Vhromon is an interactive online platform and it is user-friendly and easy to get like most of the platforms available nowadays. But they do not have all the hotels and resorts enlisted, only the well-known ones. On the other hand, Vhromon has everything enlisted where customers can compare them and can choose the right one for them. Furthermore, this system has a vendor panel where any hotel or resort owner can add their hotel or resort easily without any hassle, unlike the existing one.</span> 展开更多
关键词 Hotel Booking Hotel comparison Resort Booking Resort comparison Hotel Search Hotel Reviews Resort Search Resort Reviews Hotel Ratings Resort Ratings
下载PDF
STABILITY OF NONLINEAR COMPARISON EQUATIONS FOR DISCRETE LARGE-SCALE SYSTEMS
8
作者 舒煌 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 1990年第8期779-785,共7页
On the stability analysis of large-scale systems by Lyapunov functions, it is necessary to determine the stability of vector comparison equations. For discrete systems, only the stability of linear autonomous comparis... On the stability analysis of large-scale systems by Lyapunov functions, it is necessary to determine the stability of vector comparison equations. For discrete systems, only the stability of linear autonomous comparison equations was studied in the past. In this paper, various criteria of stability for discrete nonlinear autonomous comparison equations are completely established. Among them, a criterion for asymptotic stability is not only sufficient, but also necessary, from which a criterion on the function class C, is derived. Both of them can be used to determine the unexponential stability, even in the large, for discrete nonlinear (autonomous or nonautonomous) systems. All the criteria are of simple algebraic forms and can be readily used. 展开更多
关键词 STABILITY OF NONLINEAR comparison EQUATIONS FOR DISCRETE LARGE-SCALE systemS
下载PDF
A Comparison of the Concurrence and the Quantum Discord in a Two-Qubit System
9
作者 杨国晖 王荣 《Chinese Physics Letters》 SCIE CAS CSCD 2015年第2期5-9,共5页
The quantum correlation dynamics in an anisotropic Heisenberg XY Z model under decoherence are investigated with the use of concurrence C and quantum discord (QD). There is a remarkable difference between the time e... The quantum correlation dynamics in an anisotropic Heisenberg XY Z model under decoherence are investigated with the use of concurrence C and quantum discord (QD). There is a remarkable difference between the time evolution behaviors of these two correlation measures: there is a entanglement-sudden-death phenomenon in the concurrence while there is none in QD, which is valid for all of the initial states of this system, and the interval time of the entanglement death is found to be strongly dependent on the initial states and the parameters B and △. With the long-time limit the steady entanglement (SC) and steady quantum discord (SO, D) can be obtained. The magnitudes of SC and SQD are closely related to the parameters B and △, while the strength of the Dzyaloshinskii-Moriya interaction, D, has no influence. In addition, the effects of the parameters B and △ on SC and SQD display such different and complicated features that one cannot obtain a uniform law about them, thus we give an analytical explanation of this phenomenon. Lastly, it can be noted that the value of SC is not always larger than SQD, which is strongly dependent on the parameters B and △. 展开更多
关键词 A comparison of the Concurrence and the Quantum Discord in a Two-Qubit system
下载PDF
Natural gas characteristics and gas-source comparisons of the Lower Triassic Feixianguan Formation,Eastern Sichuan Basin,China
10
作者 Zi-Yun Zheng Yin-Hui Zuo +5 位作者 Hua-Guo Wen De-Ming Li Yang Luo Jia-Zhen Zhang Mei-Hua Yang Jian-Cheng Zeng 《Petroleum Science》 SCIE EI CAS CSCD 2023年第3期1458-1470,共13页
There is great controversy regarding the origin and source of natural gas in the Lower Triassic Feix-ianguan Formation in the Eastern Sichuan Basin.This seriously restricts the study of natural gas dy-namics in the Fe... There is great controversy regarding the origin and source of natural gas in the Lower Triassic Feix-ianguan Formation in the Eastern Sichuan Basin.This seriously restricts the study of natural gas dy-namics in the Feixianguan Formation and thus hampers natural gas exploration in the region,so further study is urgently required.Using experimental tests of natural gas composition,stable isotopes,and noble gas isotopes with gas chromatography(GC)and mass spectrometry(MS)studies of source rock and reservoir asphalt saturated hydrocarbons,the natural gas geochemical characteristics,the genetic identification and a gas-source comparison of the Feixianguan Formation were studied.Then,con-strained by the thermal history,the histories of gas generation and expulsion were restored by basin simulation technology.Finally,a gas accumulation model was established for the Feixianguan Formation.The results showed that(1)the H_(2)S-rich and H2S-poor gas reservoirs of the Feixianguan Formation are distributed on the east and west sides of the Kaijiang-Liangping trough in the Eastern Sichuan Basin,respectively.The carbon and hydrogen isotope compositions of the natural gas in the gas reservoirs are generally heavy and have typical characteristics of high-maturity dry gas reservoirs.(2)The natural gas of the Feixianguan Formation is organic thermogenic gas,which is mainly oil-type gas generated by the secondary cracking of crude oil.The gas-generating parent material is mainly type II kerogen.(3)The natural gas of the Feixianguan Formation in the Eastern Sichuan Basin was mainly generated by argil-laceous source rocks of the Upper Permian Longtan Formation.(4)Natural gas accumulation occurred as follows:the paleo-structure heights were filled with crude oil in the Early Jurassic,and paleo-oil res-ervoirs were formed in the Feixianguan Formation;during the Middle-Late Jurassic,the paleo-oil res-ervoirs were cracked when the reservoir temperatures rose above 160 C,and paleo-gas reservoirs were formed.Since the end of the Late Jurassic,the paleo-gas reservoirs have been adjusted and reformed to form the present-day natural gas reservoirs.These results provide a basis for studying natural gas accumulation dynamics of the Feixianguan Formation in the Eastern Sichuan Basin. 展开更多
关键词 Eastern Sichuan Basin Feixianguan Formation Natural gas origin Gas-source comparison Longtan Formation
下载PDF
An Effective Security Comparison Protocol in Cloud Computing
11
作者 Yuling Chen Junhong Tao +2 位作者 Tao Li Jiangyuan Cai Xiaojun Ren 《Computers, Materials & Continua》 SCIE EI 2023年第6期5141-5158,共18页
With the development of cloud computing technology,more and more data owners upload their local data to the public cloud server for storage and calculation.While this can save customers’operating costs,it also poses ... With the development of cloud computing technology,more and more data owners upload their local data to the public cloud server for storage and calculation.While this can save customers’operating costs,it also poses privacy and security challenges.Such challenges can be solved using secure multi-party computation(SMPC),but this still exposes more security issues.In cloud computing using SMPC,clients need to process their data and submit the processed data to the cloud server,which then performs the calculation and returns the results to each client.Each client and server must be honest.If there is cooperation or dishonest behavior between clients,some clients may profit from it or even disclose the private data of other clients.This paper proposes the SMPC based on a Partially-Homomorphic Encryption(PHE)scheme in which an addition homomorphic encryption algorithm with a lower computational cost is used to ensure data comparability and Zero-Knowledge Proof(ZKP)is used to limit the client’s malicious behavior.In addition,the introduction of Oblivious Transfer(OT)technology also ensures that the semi-honest cloud server knows nothing about private data,so that the cloud server of this scheme can calculate the correct data in the case of malicious participant models and safely return the calculation results to each client.Finally,the security analysis shows that the scheme not only ensures the privacy of participants,but also ensures the fairness of the comparison protocol data. 展开更多
关键词 Secure comparison protocols zero-knowledge proof homomorphic encryption cloud computing
下载PDF
A comparison study of prevalence,awareness,treatment and control rates of hypertension and associated factors among adults in China and the United States based on national survey data
12
作者 Xiaomin Sun Xinguang Chen +10 位作者 Zumin Shi Alice Fang Yan Zhongying Li Shiqi Chen Bingtong Zhao Wen Peng Xi Li Mei Zhang Limin Wang Jing Wu Youfa Wang 《Global Health Journal》 2023年第1期24-33,共10页
Objective:This study compared the prevalence,awareness,treatment and control of hypertension and associated factors in China and the United States(US).Methods:Adult data from nationally representative samples were der... Objective:This study compared the prevalence,awareness,treatment and control of hypertension and associated factors in China and the United States(US).Methods:Adult data from nationally representative samples were derived from the Chronic Disease and Risk Factors Surveillance in 2010 and 2013 in China and the National Health and Nutrition Examination Survey in 2010 and 2013 in the US.Multivariable logistic and Poisson regression analysis were conducted to assess associations of the four outcomes with body weight status and behavioral factors.Results:Age-standardized prevalence rates of hypertension was 35.7%(95%confidence interval[CI]:35.4%to 36.1%)in 2010 and 29.8%(95%CI:29.4%to 30.2%)in 2013 in China,and 35.3%(95%CI:33.6%to 37.1%)in 2010 and 37.9%(95%CI:36.0%to 39.7%)in 2013 in the US.Among hypertensive participants,the age-standardized rates of treatment were 18.4%(95%CI:17.9%to 1&9%)in 2010 and 23.8%(95%CI:23.1%to 24.6%)in 2013 in China and 54.5%(95%CI:50.3%to 5&7%)in 2010 and 50.9%(95%CI:46.5%to 55.3%)in 2013 in the US;the age-standardized hypertension control rates were 3.2%(95%CI:3.0%to 3.5%)and 5.7%(95%CI:5.3%to 6.0%)in 2010 and 2013 in China and 50.6%(95%CI:46.2%to 55.0%)and 55.3%(95%CI:50.3%to 60.3%)in the US.Obesity was significantly associated with prevalence,awareness and control rates in both countries.Different from the US,obesity was negatively associated with hypertension control in China.Conclusion:Hypertension prevalence in China is similar to that in the US,but the control rate in China was significantly lower.Obesity was a critical risk factor for poor hypertension control in China. 展开更多
关键词 HYPERTENSION International comparison TREATMENT OBESITY Risk factors
下载PDF
Digital Twins and Cyber Physical Systems toward Smart Manufacturing and Industry 4.0:Correlation and Comparison 被引量:98
13
作者 Fei Tao Qinglin Qi +1 位作者 Lihui Wang A.Y.C.Nee 《Engineering》 SCIE EI 2019年第4期653-661,共9页
State-of-the-art technologies such as the Internet of Things(IoT),cloud computing(CC),big data analytics(BDA),and artificial intelligence(AI)have greatly stimulated the development of smart manufacturing.An important ... State-of-the-art technologies such as the Internet of Things(IoT),cloud computing(CC),big data analytics(BDA),and artificial intelligence(AI)have greatly stimulated the development of smart manufacturing.An important prerequisite for smart manufacturing is cyber-physical integration,which is increasingly being embraced by manufacturers.As the preferred means of such integration,cyber-physical systems(CPS)and digital twins(DTs)have gained extensive attention from researchers and practitioners in industry.With feedback loops in which physical processes affect cyber parts and vice versa,CPS and DTs can endow manufacturing systems with greater efficiency,resilience,and intelligence.CPS and DTs share the same essential concepts of an intensive cyber-physical connection,real-time interaction,organization integration,and in-depth collaboration.However,CPS and DTs are not identical from many perspectives,including their origin,development,engineering practices,cyber-physical mapping,and core elements.In order to highlight the differences and correlation between them,this paper reviews and analyzes CPS and DTs from multiple perspectives. 展开更多
关键词 Cyber–physical systems(CPS) Digital twin(DT) SMART MANUFACTURING CORRELATION and comparison
下载PDF
Social Comparison Orientation Associated with Psychological Well Being:The Mediated Role of Self-efficacy
14
作者 QIU Yukai 《Psychology Research》 2023年第2期75-82,共8页
The paper focused on how social comparison orientation people apply influences their psychological well-being and how self-efficacy plays an important role in buffering some negative influence from upward social compa... The paper focused on how social comparison orientation people apply influences their psychological well-being and how self-efficacy plays an important role in buffering some negative influence from upward social comparison compared with someone better in one domain.In Festinger’s(1954)social comparison theory,the social comparison orientation instructed how people process the information they compared for,and related emotion was induced differently.In this paper,2,000 college students in Boston were proposed to participate in two experiments that discuss how different social comparison orientations affect their perception of life satisfaction.For the hypothetical result,we proposed that a high level of engagement in social comparison and ability-based social comparison was associated with less life satisfaction than the participants who had a low level of social comparison and opinion-based social comparison.In terms of coping strategy,we assumed that a high level of self-efficacy,which is the belief in capability to achieve a certain goal,will buffer the negative impact from upward comparison and improve the life satisfaction of those participants who like to engage with social comparison and ability-based comparison orientation. 展开更多
关键词 social comparison SELF-EFFICACY life satisfaction social media
下载PDF
Energy Comparison of Seven MPPT Techniques for PV Systems 被引量:6
15
作者 A. DOLARA R. FARANDA S. LEVA 《Journal of Electromagnetic Analysis and Applications》 2009年第3期152-162,共11页
In the future, solar energy will be a very important energy source. Several studies suppose that more than 45% of the energy in the world will be generated by photovoltaic array. Therefore it is necessary to concentra... In the future, solar energy will be a very important energy source. Several studies suppose that more than 45% of the energy in the world will be generated by photovoltaic array. Therefore it is necessary to concentrate our forces to reduce the application costs and to increment their performance. In order to reach the last aspect, it is important to note that the output characteristic of a photovoltaic array is nonlinear and changes with solar irradiation and cell’s temperature. Therefore a Maximum Power Point Tracking (MPPT) technique is needed to maximize the produced energy. This paper presents a comparative study of seven widely-adopted MPPT algorithms;their performance is evaluated using, for all the techniques, a common device with minimum hardware variations. In particular, this study compares the behaviors of each technique in presence of solar irradiation variations. 展开更多
关键词 Maximum Power Point Tracking (MPPT) Photovoltaic (PV) PV Performance comparison Renewable ENERGY DC-DC Converter.
下载PDF
Spectral Target-Detecting System Using Sine-Wave Modulation 被引量:1
16
作者 DENG Wei ZHAO Chun-jiang +2 位作者 ZHANG Lu-da CHENG Li-ping Andrew Landers 《光谱学与光谱分析》 SCIE EI CAS CSCD 北大核心 2011年第10期2771-2777,共7页
Target detection is one of the key technology of precision chemical application.Previously the digital coding modulation technique was commonly used to emit and receive the optical signal in the target detection syste... Target detection is one of the key technology of precision chemical application.Previously the digital coding modulation technique was commonly used to emit and receive the optical signal in the target detection systems previously in China.It was difficult to adjust the output power,and the anti-interference ability was weak in these systems.In order to resolve these problems,the target detection method based on analog sine-wave modulation was studied.The spectral detecting system was set up in the aspects of working principle,electric circuit,and optical path.Lab testing was performed.The results showed that the reflected signal from the target varied inversely with detection distances.It indicated that it was feasible to establish the target detection system using analog sine-wave modulation technology.Furthermore,quantitative measurement of the reflected optical signal for near-infrared and visible light could be achieved by using this system.The research laid the foundation for the future development of the corresponding instrument. 展开更多
关键词 Sine-wave modulation ANALOG Target detection Optical spectrum
下载PDF
Industrial shape detecting system of cold rolling strip 被引量:9
17
作者 杨利坡 于丙强 +1 位作者 丁栋 刘宏民 《Journal of Central South University》 SCIE EI CAS 2012年第4期994-1001,共8页
A high-precision shape detecting system of cold rolling strip is developed to meet industrial application, which mainly consists of the shape detecting roller, the collecting ring, the digital signal processing (DSP... A high-precision shape detecting system of cold rolling strip is developed to meet industrial application, which mainly consists of the shape detecting roller, the collecting ring, the digital signal processing (DSP) shape signal processing board and the shape control model. Based on the shape detecting principle, the shape detecting roller is designed with a new integral structure for improving the precision of shape detecting and avoiding scratching strip surface. Based on the DSP technology, the DSP shape signal processing circuit board is designed and embedded in the shape detecting system for the reliability and stability of shape signal processing. The shape detecting system was successfully used in Angang 1 250 mm HC 6-high reversible cold rolling mill. The precision of shape detecting is 0.2 I and the shape deviation is controlled within 6 1 after the close loop shape control is input. 展开更多
关键词 shape detecting digital signal processing (DSP) shape signal processing close loop shape control cold rolling strip
下载PDF
Optoelectronic Detecting System for Inner Walls of Pipes 被引量:1
18
作者 BAIBaoxing MAHong 《Semiconductor Photonics and Technology》 CAS 1998年第2期104-108,共5页
This paper is concerned with a high characteristic image processing and recognition system that is used for inspecting real-time blemishes, streaks and cracks on the inner walls of high accuracy pipes. As a regular de... This paper is concerned with a high characteristic image processing and recognition system that is used for inspecting real-time blemishes, streaks and cracks on the inner walls of high accuracy pipes. As a regular detector, the BP neural network is used for extracting features of the image inspected and classifying these images, it takes fully advantage of the function of artificial neural network, such as the information distributed memory, large scale self-adapting parallel processing, high fault-tolerant ability and so forth. Besides, an improved BP algorithm is used in the system for training the network, and making the learning procedure of the net converges to the minimum of overall situation at high rate. 展开更多
关键词 Feature Extraction Image Recognition Neural Network Optoelectronic Detection
下载PDF
Multiomics comparison among populations of three plant sources of Amomi Fructus 被引量:1
19
作者 Xinlian Chen Shichao Sun +15 位作者 Xiaoxu Han Cheng Li Fengjiao Wang Bao Nie Zhuangwei Hou Song Yang Jiaojiao Ji Ge Li Yanqian Wang Xiaoyu Han Jianjun Yue Cui Li Wei Li Lixia Zhang Depo Yang Li Wang 《Horticulture Research》 SCIE CSCD 2023年第8期129-142,共14页
Amomi Fructus(Sharen,AF)is a traditional Chinese medicine(TCM)from three source species(or varieties),including Wurfbainia villosa var.villosa(WVV),W.villosa var.xanthioides(WVX),or W.longiligularis(WL).Among them,WVV... Amomi Fructus(Sharen,AF)is a traditional Chinese medicine(TCM)from three source species(or varieties),including Wurfbainia villosa var.villosa(WVV),W.villosa var.xanthioides(WVX),or W.longiligularis(WL).Among them,WVV has been transplanted from its top-geoherb region,Guangdong,to its current main production area,Yunnan,for>50 years in China.However,the genetic and transcriptomic differentiation among multiple AF source species(or varieties)and between the origin and transplanted populations of WVV is unknown.In our study,the observed overall higher expression of terpenoid biosynthesis genes in WVV than in WVX provided possible evidence for the better pharmacological effect of WVV.We also screened six candidate borneol dehydrogenases(BDHs)that potentially catalyzed borneol into camphor in WVV and functionally verified them.Highly expressed genes at the P2 stage of WVV,Wv05G1424 and Wv05G1438,were capable of catalyzing the formation of camphor from(+)-borneol,(-)-borneol and DL-isoborneol.Moreover,the BDH genes may experience independent evolution after acquiring the ancestral copies,and the following tandem duplications might account for the abundant camphor content in WVV.Furthermore,four populations of WVV,WVX,and WL are genetically differentiated,and the gene flow from WVX to WVV in Yunnan contributed to the greater genetic diversity in the introduced population(WVV-JH)than in its top-geoherb region(WVV-YC),which showed the lowest genetic diversity and might undergo genetic degradation.In addition,terpene synthesis(TPS)and BDH genes were selected among populations of multiple AF source species(or varieties)and between the top-and non-top-geoherb regions,which might explain the difference in metabolites between these populations.Our findings provide important guidance for the conservation,genetic improvement,and industrial development of the three source species(or varieties)and for identifying top-geoherbalism with molecular markers,and proper clinical application of AF. 展开更多
关键词 HERBAL AMONG comparison
下载PDF
First acceptance testing of multiple A10 absolute gravimeters in China and analysis of the comparison results 被引量:2
20
作者 Xiaotong Zhang Hao Zhou +4 位作者 Ying Jiang Dulin Zhai Gongzhe Wei Hui Li Ziwei Liu 《Geodesy and Geodynamics》 EI CSCD 2023年第4期401-410,共10页
Three A10 absolute gravimeters(AGs) were first acquired in China by the Hubei Earthquake Agency under the Belt and Road Seismic Monitoring Network Project. Although AG measuring and testing technique is not new, the p... Three A10 absolute gravimeters(AGs) were first acquired in China by the Hubei Earthquake Agency under the Belt and Road Seismic Monitoring Network Project. Although AG measuring and testing technique is not new, the purchase and simultaneous testing of 3 A10 absolute gravimeters is unprecedented in China. This study conducted the first acceptance testing of the AGs at 3 locations(the Jiufengshan Gravity Observation Station, the Global Navigation Satellite System Observation Station in Wuhan, and the Jiugongshan Observation Station in Xianning). The results were compared using a method based on expert validation, and the acceptance testing scheme was formulated by referring to the Technical Regulations for Tectonic Environment Monitoring Networks in China and Specifications for Gravimetry Control. Based on the repeatability, precision, and consistency of the measured g values, the results from each instrument were evaluated using the air pressure precision test. Comparing the instrument reference values, the final test results can identify the indicator parameters for 3 A10 AGs, the effects of the surrounding environment, and the related parameters on measurement precision. The precision of A10-059, A10-058, and A10-057 exceeded 0.78 μGal, 0.79 μGal, and 0.42 μGal, respectively.This testing scheme can be used as a reference for conducting acceptance testing of AGs in the future and obtaining absolute gravimetric measurements. 展开更多
关键词 Gravitational acceleration comparison of absolute gravimeters A10 absolute gravimeters Instrument precision
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部