Sedimentary and tectonic evolution of the Banquan pull-apart basin and implications for late Cenozoic dextral strike-slip movement of the Tanlu Fault Zone

The Banquan Basin is a pull-apart basin with the largest scale and the most prominent structure due to dextral slip of the Tanlu Fault Zone(TLFZ) in late Cenozoic. The depositional history of the basin records the start time and evolution of the right-lateral strike-slip movement of the TLFZ. This paper studies the sedimentary and tectonic evolution of the Banquan Basin by seismic reflection exploration, borehole detection and cosmogenic nuclide chronology. We analyze the coupling relationship between the pull-apart basin and the strike-slip fault and discuss the start time and tectonic significance of the right-lateral strikeslip of the TLFZ. Our study indicates that the Banquan Basin has undergone three evolutionary stages: weak rifting during the pre-pull-apart period, strong extension during the syn-pull-apart period and subsidence during the post-pull-apart period. This implies that the TLFZ, which controls the evolution of the basin, experienced an evolutionary process of weak activity,intensified activity and migration of activity toward the central basin. The sedimentary filling of the basin has strong response to the episodic pull-apart and extension of the basin. Lying upon the basement of the basin, a thin layer of Miocene mudstone slowly accumulated due to local rifting before the strong pull-apart event. Along with the dextral slipping and pull-apart process, the basin was filled with alluvial fan facies, fluvial facies and floodplain facies strata from bottom to top. The latest tectonic movement of the TLFZ in the North China Block in late Cenozoic was dominated by episodic dextral strike-slip motion, and this deformation pattern started at 4.01±1.27 Ma. The latest tectonic deformation in North China since late Cenozoic was governed by eastward extrusion and tectonic orogenesis of the eastern margin of the Qinghai-Xizang Plateau since late Miocene. The eastward thrusting of the Liupanshan fault zone and sinistral shearing of the Qinling fault zone led to the anticlockwise rotation and pushing of secondary blocks in North China, resulting in a planar bookshelf faulting and rotation pattern. This unique deformation pattern transferred eastwards to the North China Plain at ~4.01 Ma and the process continues to the present time.This planar bookshelf rotation, accompanied with regional sinistral strike-slip movement of the ~EW-trending boundary fault zones to the north and south of the North China Block and dextral strike-slip motion of the NNE-trending boundary faults between secondary blocks, is likely to be the long-range effect of the strong extrusion of the eastern margin of the QinghaiXizang Plateau.

A Large-Scale Palaeozoic Dextral Ductile Strike-Slip Zone:the Aqqikkudug-Weiya Zone along the Northern Margin of the Central Tianshan Belt,Xinjiang,NW China

Abstract The nearly E-W-trending Aqqikkudug-Weiya zone, more than 1000 km long and about 30 km wide, is an important segment in the Central Asian tectonic framework. It is distributed along the northern margin of the Central Tianshan belt in Xinjiang, NW China and is composed of mylonitized Early Palaeozoic greywacke, volcanic rocks, ophiolitic blocks as a mélange complex, HP/LT-type bleuschist blocks and mylonitized Neoproterozoic schist, gneiss and orthogneiss. Nearly vertical mylonitic foliation and sub-horizontal stretching lineation define its strike-slip feature; various kinematic indicators, such as asymmetric folds, non-coaxial asymmetric macro- to micro-structures and C-axis fabrics of quartz grains of mylonites, suggest that it is a dextral strike-slip ductile shear zone oriented in a nearly E-W direction characterized by “flower” strusture with thrusting or extruding across the zone toward the two sides and upright folds with gently plunging hinges. The Aqqikkudug-Weiya zone experienced at least two stages of ductile shear tectonic evolution: Early Palaeozoic north vergent thrusting ductile shear and Late Carboniferous-Early Permian strike-slip deformation. The strike-slip ductile shear likely took place during Late Palaeozoic time, dated at 269±5 Ma by the40Ar/39Ar analysis on neo-muscovites. The strike-slip deformation was followed by the Hercynian violent S-type granitic magmatism. Geodynamical analysis suggests that the large-scale dextral strike-slip ductile shearing is likely the result of intracontinental adjustment deformation after the collision of the Siberian continental plate towards the northern margin of the Tarim continental plate during the Late Carboniferous. The Himalayan tectonism locally deformed the zone, marked by final uplift, brittle layer-slip and step-type thrust faults, transcurrent faults and E-W-elongated Mesozoic-Cenozoic basins.

Dextral strike-slip of Sanguankou-Niushoushan fault zone and extension of arc tectonic belt in the northeastern margin of the Tibet Plateau

Sanguankou-Niushoushan 差错(SGK-NSSF ) 的运动学的特征具有到弧的延期的理解的大意义在西藏高原的东北边缘的构造的带。用地调查和各种各样的数据收集方法，包括大规模地质的印射，典型地形学的测量，并且沉积阶层标明日期， SGK-NSSF 展出明显的右罢工滑倒特征并且因此不是一个左首的罢工滑倒差错，由以前的研究人员相信了，这被决定。这研究的结果证明地质的边界为古生代，中生代，和新生代时代都被差错右地打乱，与是类似的指责的排水量。在地志的效果的消除以后，差错的最大的罢工滑倒排水量被发现是

Formation and evolution of the strike-slip faults in the central Sichuan Basin, SW China

Based on 3D seismic and drilling data, the timing, evolution and genetic mechanism of deep strike-slip faults in the central Sichuan Basin are thoroughly examined by using the U-Pb dating of fault-filled carbonate cement and seismic-geological analysis. The strike-slip fault system was initially formed in the Late Sinian, basically finalized in the Early Cambrian with dextral transtensional structure, was overlaid with at least one stage of transpressional deformation before the Permian, then was reversed into a sinistral weak transtensional structure in the Late Permian. Only a few of these faults were selectively activated in the Indosinian and later periods. The strike-slip fault system was affected by the preexisting structures such as Nanhuanian rifting normal faults and NW-striking deep basement faults. It is an oblique accommodated intracratonic transfer fault system developed from the Late Sinian to Early Cambrian to adjust the uneven extension of the Anyue trough from north to south and matches the Anyue trough in evolution time and intensity. In the later stage, multiple inversion tectonics and selective activation occurred under different tectonic backgrounds.

Control of strike-slip faults on Sinian carbonate reservoirs in Anyue gas field, Sichuan Basin, SW China

The largest Precambrian gas field (Anyue gas field) in China has been discovered in the central Sichuan Basin. However, the deep ancient Ediacaran (Sinian) dolomite presents a substantial challenge due to their tightness and heterogeneity, rather than assumed large-area stratified reservoirs controlled by mound-shoal microfacies. This complicates the characterization of “sweet spot” reservoirs crucial for efficient gas exploitation. By analyzing compiled geological, geophysical and production data, this study investigates the impact of strike-slip fault on the development and distribution of high-quality “sweet spot” (fractured-vuggy) reservoirs in the Ediacaran dolomite of the Anyue gas field. The dolomite matrix reservoir exhibits low porosity (less than 4%) and low permeability (less than 0.5×10^(-3) μm^(2)). Contrarily, fractures and their dissolution processes along strike-slip fault zone significantly enhance matrix permeability by more than one order of magnitude and matrix porosity by more than one time. Widespread “sweet spot” fracture-vuggy reservoirs are found along the strike-slip fault zone, formed at the end of the Ediacaran. These fractured reservoirs are controlled by the coupling mechanisms of sedimentary microfacies, fracturing and karstification. Karstification prevails at the platform margin, while both fracturing and karstification control high-quality reservoirs in the intraplatform, resulting in reservoir diversity in terms of scale, assemblage and type. The architecture of the strike-slip fault zone governed the differential distribution of fracture zones and the fault-controlled “sweet spot” reservoirs, leading to wide fractured-vuggy reservoirs across the strike-slip fault zone. In conclusion, the intracratonic weak strike-slip fault can play a crucial role in improving tight carbonate reservoir, and the strike-slip fault-related “sweet spot” reservoir emerges as a unique and promising target for the efficient development of deep hydrocarbon resources. Tailored development strategies need to be implemented for these reservoirs, considering the diverse and differential impacts exerted by strike-slip faults on the reservoirs.

华北克拉通胶莱盆地马山地区粗面英安岩磷灰石U-Pb年代学及其地质意义

五莲—青岛—烟台断裂是胶莱盆地重要的控盆断裂之一,控制了盆地的形成与演化,主要由牟平—即墨断裂和桃村断裂等多条NNE向断裂组成。前人研究表明,五莲—青岛—烟台断裂运动学转换历史先后可划分为晚侏罗世左旋走滑、早白垩世伸展断陷和晚白垩世—古新世右旋走滑三个阶段,但其新生代右旋走滑事件的持续时间仍存在争议。已有研究表明,区域上同尺度断裂走滑运动温度为550~650℃,显著高于磷灰石U-Pb体系封闭温度(350~550℃),因此磷灰石可能是记录五莲—青岛—烟台断裂右旋走滑的理想对象。本文选取胶莱盆地马山粗面英安岩中的磷灰石进行U-Pb年代学研究,拟约束五莲—青岛—烟台断裂的右旋走滑持续时间。磷灰石U-Pb年龄为(64.1±3.7)Ma,明显晚于早白垩世寄主粗面英安岩锆石U-Pb年龄(119.3±1.6)Ma,表明自早白垩世以来磷灰石至少经历了一次热事件导致其U-Pb同位素体系重置。早白垩世以来,由于印度板块和欧亚板块的碰撞,以及古太平洋板块由NWW向俯冲转变为NW向俯冲,导致了古新世胶莱盆地N—S向拉分和牟平—即墨断裂右旋走滑。因此,本文认为马山粗面英安岩磷灰石U-Pb年龄记录了五莲—青岛—烟台断裂右旋走滑热事件,表明其右旋走滑可能持续到古新世。

柴达木盆地西北缘尖顶山和黑梁子背斜的几何学与运动学特征分析

选取青藏高原北部柴达木盆地内尖顶山和黑梁子背斜作为研究对象,基于遥感影像和地震剖面,解释并分析该背斜构造带的地表次级断裂以及地下构造的变形样式与运动特征。遥感影像显示,尖顶山背斜的大部分地表次级断裂从北西走向的压扭断裂向东南方向过渡为南北走向的正断层,而黑梁子背斜的地表次级断裂为北北东走向的左行张扭断层。地震剖面显示,尖顶山和黑梁子背斜由上部逆冲滑脱断裂和下部基底正花状构造组成,深层与浅层的变形解耦主要受新生界下部路乐河组的膏盐层影响。结合地表次级断裂和地下基底断裂的平面展布样式、运动特征以及沿走向的变化,认为尖顶山和黑梁子背斜为右行压扭构造,推测在印度板块与欧亚大陆汇聚的背景下,柴达木盆地内部在持续缩短变形的过程中发生向东的差异性挤出,从而形成一系列压扭性质的背斜构造。

Stress tensors and quantification of fracture patterns to analyze connectivity and potential fluid flow in a mesa landform of the Northern Andes

This work applies stress tensors inversions and quantification of fracture patterns along the Mesa de Los Santos, in the Eastern Cordillera of Colombia, to better understand the potential fluid flow. It thus contributes to the conceptual hydrogeological model. The area was subdivided into three blocks, separated by the NW Potreros and the Los Santos faults, having minor inner faults of different orientations. This separation facilitates the analysis of the fractures measured in the field, which in general show high dip angles and a conjugate geometry in the northern block, tension fractures(Mode I) in the central block, and a random distribution in the southwestern block. WinTensor treatment of slickensides yielded a maximum horizontal stress(SHmax) of 111o, which coincides with the WNW-ESE tensor observed from the conjugate and tension joints. We then used Frac Pa Q to generate interpolation maps of fracture intensity and density. The maps show the highest values in the central block and the lowest in the northern block,where the precipitation is higher, causing intensive rock weathering and homogenization of the fracture planes. Although the highest values of connectivity by line are found to the south of the mesa, we suggest the possibility of greater flow from the recharge zone(NE) along bedding planes and open NW-SE fractures.

Hydrocarbon accumulation characteristics in basement reservoirs and exploration targets of deep basement reservoirs in onshore China

Based on the global basement reservoir database and the dissection of basement reservoirs in China,the characteristics of hydrocarbon accumulation in basement reservoirs are analyzed,and the favorable conditions for hydrocarbon accumulation in deep basement reservoirs are investigated to highlight the exploration targets.The discovered basement reservoirs worldwide are mainly buried in the Archean and Precambrian granitic and metamorphic formations with depths less than 4500 m,and the relatively large reservoirs have been found in rift,back-arc and foreland basins in tectonic active zones of the Meso-Cenozoic plates.The hydrocarbon accumulation in basement reservoirs exhibits the characteristics in three aspects.First,the porous-fractured reservoirs with low porosity and ultra-low permeability are dominant,where extensive hydrocarbon accumulation occurred during the weathering denudation and later tectonic reworking of the basin basement.High resistance to compaction allows the physical properties of these highly heterogeneous reservoirs to be independent of the buried depth.Second,the hydrocarbons were sourced from the formations outside the basement.The source-reservoir assemblages are divided into contacted source rock-basement and separated source rock-basement patterns.Third,the abnormal high pressure in the source rock and the normal–low pressure in the basement reservoirs cause a large pressure difference between the source rock and the reservoirs,which is conducive to the pumping effect of hydrocarbons in the deep basement.The deep basement prospects are mainly evaluated by the factors such as tectonic activity of basement,source-reservoir combination,development of large deep faults(especially strike-slip faults),and regional seals.The Precambrian crystalline basements at the margin of the intracontinental rifts in cratonic basins,as well as the Paleozoic folded basements and the Meso-Cenozoic fault-block basements adjacent to the hydrocarbon generation depressions,have favorable conditions for hydrocarbon accumulation,and thus they are considered as the main targets for future exploration of deep basement reservoirs.

Uniform Strike-Slip Rate along the Xianshuihe-Xiaojiang Fault System and Its Implications for Active Tectonics in Southeastern Tibet

Recent studies on the Xianshuihe-Xiaojiang fault system suggest that the Late Quaternary strike-slip rate is approximately uniform along the entire length of the fault zone, about 15±2 mm/a. This approximately uniform strike slip rate strongly supports the clockwise rotation model of the southeastern Tibetan crust. By approximating the geometry of the arc-shaped Xianshuihe-Xiaojiang fault system as a portion of a small circle on a spherical Earth, the 15±2 mm/a strike slip rate corresponds to clockwise rotation of the Southeastern Tibetan Block at the （5.2±0.7）×10^-7 deg/a angular velocity around the pole （21°N, 88°E） relative to the Northeast Tibetan Block. The approximately uniform strike slip rate along the Xianshuihe-Xiaojiang fault system also implies that the Longmeushan thrust zone is not active, or at least its activity has been very weak since the Late Quaternary. Moreover, the total offset along the Xiaushuihe-Xiaojiang fault system suggests that the lateral extrusion of the Southeastern Tibetan Block relative to Northeastern Tibetan Block is about 160 km and 200-240 km relative to the Tarim-North China block. This amount of lateral extrusion of the Tibetan crust should have accommodated about 13-24% convergence between India and Eurasia based on mass balance calculations. Assuming that the slip rate of 15±2 mm/a is constant throughout the entire history of the Xianshuihe-Xiaojiang fault system, 11±1.5 Ma is needed for the Xianshuihe-Xiaojiang fault system to attain the 160 km of total offset. This implies that left-slip faulting on the Xianshuihe-Xiaojiang fault system might start at 11±1.5 Ma.

The Dihedral Angle and Intersection Processes of a Conjugate Strike-Slip Fault System in the Tarim Basin, NW China

Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of a large conjugate strike-slip fault system from the intracratonic Tarim Basin, NW China. Within our study area, ＂X＂ type NE and NW trending faults occur within Cambrian- Ordovician carbonates. The dihedral angles of these conjugate faults have narrow ranges, 19~ to 62~ in the Cambrian and 26~ to 51~ in the Ordovician, and their modes are 42~ and 44~ respectively. These data are significantly different from the ~60~ predicted by the Coulomb fracture criterion. It is concluded that： （1） The dihedral angles of the conjugate faults were not controlled by confining pressure, which was low and associated with shallow burial; （2） As dihedral angles were not controlled by pressure they can be used to determine the shortening direction during faulting; （3） Sequential slip may have played an important role in forming conjugate fault intersections; （4） The conjugate fault system of the Tarim basin initiated as rhombic joints; these subsequently developed into sequentially active ＂X＂ type conjugate faults; followed by preferential development of the NW-trending faults; then reactivation of the NE trending faults. This intact rhombic conjugate fault system presents new insights into mechanisms of dihedral angle development, with particular relevance to intracratonic basins.

Characteristics of strike-slip inversion structures of the Karatau fault and their petroleum geological significances in the South Turgay Basin,Kazakhstan

The Karatau fault is one of the important strike-slip faults in central Asia,and the South Turgay Basin is located towards its northern end.Detailed seismic interpretation indicated that the strikeslip tectonism of the Karatau fault weakened gradually from west to east in the South Turgay Basin.Typical flower structures developed on the section,and strike-slip faults showed an echelon pattern on planar view.The Karatau strike-slip fault affected the South Turgay Basin in two periods：（1） The South Turgay strike-slip pull-apart rift basin formed as a result of regional extensive stress in the Early-Middle Jurassic,characterized by the juxtaposition of horsts and grabens.The formation of horsts provided favorable reservoir spaces for later hydrocarbon accumulation,and different filling stages of grabens controlled different reservoir-forming factors in grabens.（2） Two stages of tectonic inversion occurred in the Late Jurassic and Late Cretaceous and played a crucial role in the final shape of the structure in the South Turgay Basin.The oil and gas migrated to form reservoirs and mainly concentrated in the horsts,graben slopes and in both sides of the strike-slip fault zone.In the case of the degree of accumulation of petroleum,the factor explaining why horsts are better than grabens is the strike-slip pull-apart of the South Turgay Basin,and the structure inversion of the South Turgay Basin explains why the west graben is better than the east one.Overall,the Karatau strike-slip fault played a very important role in the formation of the South Turgay Basin and its hydrocarbon accumulations.

Characteristics and evolution of strike-slip tectonics of the Liaohe Western Sag,Bohai Bay Basin

Because of its rich oil and gas resources and the special tectonic location of the Liaohe Western Sag （the Tanlu Fault traverses the sag）, Bohai Bay Basin, a detailed study of its strike-slip tectonics is significant in revealing the sag＇s tectonic evolution, its control on hydrocarbon accumulation, and the activity history of the northern section of the Tanlu Fault in the Cenozoic. Through systematic structure analysis of 3D seismic data of the Liaohe Western Sag, combined with balanced section analysis, a variety of structural features in relation to right-lateral strike-slip faults, such as echelon normal faults, ＂comb＂ structure, ＂flower＂ structure,＂interpretable＂ and ＂buried＂ strike-slip faults have been revealed exist in the Liaohe Western Sag. According to the research in this paper, the complex structural phenomena in the Liaohe Western Sag could be reasonably interpreted as right-lateral strike-slip activity and the strike-slip activities of the Liaohe Western Sag began in the early Oligocene. The activity was weak at the beginning （E3s1-2）, then strengthened gradually and reached its strongest level in the late Oligocene （E3d1）. In the Miocene, the strike-slip activity was low and then strengthened significantly once again from the Pliocene to the present. It is speculated that the entire northern section of the Tanlu Fault has had a similar evolution history since the Oligocene.

Miocene Tectonic Evolution from Dextral-Slip Thrusting to Extension in the Nyainqentanglha Region of the Tibetan Plateau

Dextral-slip in the Nyainqentanglha region of Tibet resulted in oblique underthrusting and granite generation in the Early to Middle Miocene, but by the end of the epoch uplift and extensional faulting dominated. The east-west dextral-slip Gangdise fault system merges eastward into the northeast-trending, southeast-dipping Nyainqentanglha thrust system that swings eastward farther north into the dextral-slip North Damxung shear zone and Jiali faults. These faults were took shape by the Early Miocene, and the large Nyainqentanglha granitic batholith formed along the thrust system in 18.3-11.0 Ma as the western block drove under the eastern one. The dextral-slip movement ended at -11 Ma and the batholith rose, as marked by gravitational shearing at 8.6-8.3 Ma, and a new fault system developed. Northwest-trending dextral-slip faults formed to the northwest of the raisen batholith, whereas the northeast-trending South Damxung thrust faults with some sinistral-slip formed to the southeast. The latter are replaced farther to the east by the west-northwest-trending Lhtinzhub thrust faults with dextral-slip. This relatively local uplift that left adjacent Eocene and Miocene deposits preserved was followed by a regional uplift and the initiation of a system of generally north-south grabens in the Late Miocene at -6.5 Ma. The regional uplift of the southern Tibetan Plateau thus appears to have occurred between 8.3 Ma and 6.5 Ma. The Gulu, DamxungYangbajain and Angan graben systems that pass east of the Nyainqentanglha Mountains are locally controlled by the earlier northeast-trending faults. These grabens dominate the subsequent tectonic movement and are still very active as northwest-trending dextral-slip faults northwest of the mountains. The Miocene is a time of great tectonic change that ushered in the modern tectonic regime.

Characteristics of the Late Quaternary right-lateral strike-slip movement of Bolokenu-Aqikekuduk fault in northern Tianshan Mountains,NW China

The characteristics of the Bolokenu-Aqikekuduk（Bo-A） fault,a right-lateral strike-slip fault that runs for more than 700 km long and obliquely cuts North Tianshan Mountains,are evaluated here based on remote sensing data,and through an analysis of the results from field investigations as well as climate-geomorphic events. The fault is composed of a western segment with a NW strike and an eastern segment with a NWW strike.The western segment is nearly 250 km long,extending northwestward into Kazakhstan with a right-lateral strike-slip rate of 5 mm/a.This domain consists of 4-5 rupture sections,with 3-4 deformation belts,caused by ancient or historical earthquakes,and suggesting the potential for the occurrence of further strong earthquakes（with M≈7.5） in future. The eastern segment of the fault shows a right-lateral strike-slip rate of 1-1.4 mm/a,with the development of 3-4 deformation belts caused by ancient or historical earthquakes,and with a potential for future strong earthquake with M≈7.0. A typical strain partitioning style in the compression area has developed between the intermontane BoA fault and the piedmont thrust structures of Northern Tianshan Mountains,under the effect of oblique compression,as indicated by the piedmont thrust structure and the strike-slip fault in the mountains.

Discussion on the dextral movement and its effect in continental China and adjacent areas since Cenozoic

Continental China has moved dextral Eastward since Cenozoic time,driven by the collision of the Indian with the Eurasian plate.Evidence for this comes from landscape evolution,the distribution of earthquake epicenters,Cenozoic sedimentary and volcanic rocks,and the measurement of GPS velocity vectors,the distribntion of crustal stress,paleomagnetic data,and deep mantle structure,among others.This movement commenced around 40 Ma,coupled with thickened lithosphere and widespread stress release along strikeslip faults that bound the continental Chinese block.Because of continued Northward subduction of the Indian plate,manifestation of the dextral movement has intensified since 25 Ma.Far-reaching effects include extensive strike-slip movement on the Tan-Lu fault in Eastern China,formation of the Dabie ultrahigh pressure metamorphic terrane,extensive thrust faults in East China,delamination and thickening of the lithosphere of South China,a possible tectonic doubling of the Middle-Lower Yangtze Valley metallogenic belt,and the formation of the Japan,Huanghai (East China),and South China Sea.

Neotectonics of the Eastern Margin of the Tibetan Plateau: New Geological Evidence for the Change from Early Pleistocene Transpression to Late Pleistocene-Holocene Strike-slip Faulting

We present in this paper some new evidence for the change during the Quaternary in kinematics of faults cutting the eastern margin of the Tibetan Plateau. It shows that significant shortening deformation occurred during the Early Pleistocene, evidenced by eastward thrusting of Mesozoic carbonates on the Pliocene lacustrine deposits along the Minjiang upstream fault zone and by development of the transpressional ridges of basement rocks along the Anninghe river valley. The Middle Pleistocene seems to be a relaxant stage with local development of the intra-mountain basins particularly prominent along the Minjiang Upstream and along the southern segment of the Anninghe River Valley. This relaxation may have been duo to a local collapse of the thickened crust attained during the late Neogene to early Pleistocene across this marginal zone. Fault kinematics has been changed since the late Pleistocene, and was predominated by reverse sinistral strike-slip along the Minshan Uplift, reverse dextral strike-slip on the Longmenshan fault zone and pure sinistral strike-slip on the Anninghe fault. This change in fault kinematics during the Quaternary allows a better understanding of the mechanism by which the marginal ranges of the plateau has been built through episodic activities.

On the faults of western Hexi Corridor and its nearby regions, northwestern China: Thrust faults and strike-slip faults of Late Cenozoic

The structural analysis based on the explanation of seismic profiles indicates that a lot of thrust faults and strike-slip faults of Late Cenozoic occur in western Hexi Corridor and its nearby regions. They can be divided into two types. One is thrust faults dipping southwards and extending NWwards, which was mainly correlated with the thrusting of northern Qilianshan and located at the NE margin of Qilianshan and the southwestern Hexi Corridor, the other is thrust faults and strike-slip faults that were related to the strike-slipping of Altun fault and located mainly at the regions of Hongliuxia, Kuantaishan, and Helishan that are close to the Altun fault. All these faults, which were related to the remote effects of collision between the two continents of India and Tibet during the Late Eocene and later, started to develop since the Late Tertiary and presented the features of violent thrust or strike-slip movement in Quaternary. Many of them are still active up to now and thus belong to the active faults that are the potential inducement of earthquakes in the Hexi Corridor. Moreover, a lot of intense structural deformation and many morphology phenomena such as tectonic terrace and river offset were formed under the control of these faults in Quaternary.

CENOZOIC LARGE-SCALE STRIKE-SLIP FAULT IN WEST YUNNAN, CHINA

During the collision between India and Eurasia, the continental compression and shorten is thought to be absorbed by the way of thickening of the Tibetan plateau crust and strike\|slip extrusion outwardly of blocks surrounding the Tibetan plateau. A series of models have been proposed recently, of which the most typical one is continental blocks extrusion by Tapponnier et al.. Virtually previous studies show that the Red River—Ailaoshan fault is the eastern boundary of extrusion Indochina displaced southward relative to South China about 23 Ma ago, and more, the western boundary of extrusion blocks is inferred to be Sijie fault in the eastern Burma. But the movement age of Sijie fault is around 13 Ma inferred from the age of Andeman Sea formation and different from that of the Red River—Ailaoshan fault. It is an important scientific problem where the western boundary of extrusion blocks is.

A New Growth Model of Fault Attributes in a Strike-Slip Fault System in the Tarim Basin

Fault attributes generally display a consistent power–law-scaling relationship.Based on new 3 D seismic data,however,we found some exceptional fault attribute relationships of lengths(L)–throw(T)(vertical component of displacement),overlap zone length(Lo)–width(Wo)from a strike-slip fault system of the Ordovician carbonates in the Tarim Basin.The L–T relationship shows two linear segments with breakup at^40 km in fault length.This presents an exceptional throw increase in the second stage,which is attributed to a localization of vertical displacement and deformation in overlapping zones other than the different fault scales in a mature fault zone.The Lo–Wo relationship in the overlapping zones shows multiply stepped-shape patterns,suggesting multiple fault differential growth and periodic increase in fault size.Therefore,we propose a new alternative growth model of fault attributes in strike-slip fault zones,in which the overlapping zones accumulated localized displacement and deformation in the intracratonic strike-slip fault zone.