Ceramics are considered intrinsically brittle at macro scale due to the lack of slip mechanism and pre-existing defects,which greatly limits their potential applications in emerging fields including wearable electroni...Ceramics are considered intrinsically brittle at macro scale due to the lack of slip mechanism and pre-existing defects,which greatly limits their potential applications in emerging fields including wearable electronic devices and flexible display.In this contribution,we developed BiFeO_(3)/SiO_(2) dual-networks with exceptional flexibility through a coupled electronetting/electrospun method.The hybrid nanostructured networks endow the material with high tensile strength(2.7 MPa),excellent flexibility(80%recoverable deformation),and robust fatigue resistance performance(maintain flexibility after a 1000-cyclic compress test).After in-situ compounded with dielectric polymer via a layer-by-layer solution casting method,the resultant three-dimensional(3D)composite film exhibits a twice higher dielectric constant(εr)than polyether imide(PEI)film.More importantly,the breakdown strength of the 3D composite film is almost the same as that of the PEI film,resulting in an enhanced energy density of~6.0 J/cm^(3) and a high efficiency of 80%at 4.58 MV/cm.The unique structure,combined with the excellent balance between mechanical and dielectric properties in flexible structures,is of critical significance to the design of flexible functional ceramics and broadening their applications in wearable electric devices.展开更多
（Ba（0.6） Sr（0.4））（0.85） Bi（0.1） TiO3 ceramics doped with x wt%CaZrO3（x= 0-10） were synthesized by solid-state reaction method. The effects of CaZrO3 amount on the dielectric properties and structure of（Ba...（Ba（0.6） Sr（0.4））（0.85） Bi（0.1） TiO3 ceramics doped with x wt%CaZrO3（x= 0-10） were synthesized by solid-state reaction method. The effects of CaZrO3 amount on the dielectric properties and structure of（Ba（0.6）Sr（0.4））（0.85） Bi（0.1） TiO3 ceramics were investigated. X-ray diffraction results indicated a pure cubic perovskite structure for all samples and that the lattice parameter increased till x=5 and then slightly decreased. A homogenous microstructure was observed with the addition of CaZrO3. Dielectric measurements revealed a relaxor-like characteristic for all samples and that the diffusivity γ reached the maximum value of 1.78 at x=5. With the addition of CaZrO3, the dielectric constant dependence on electric field was weakened, insulation resistivity enhanced and dielectric breakdown strength improved obviously and reached 19.9 k V/mm at x=7.5. In virtue of low dielectric loss（tan d〈0.001 5）, moderate dielectric constant（er 〉1 500） and high breakdown strength（Eb 〉17.5 k V/mm）, the CaZrO3 doped（Ba（0.6）Sr（0.4））0.85 Bi（0.1） TiO3 ceramic is a potential candidate material for high power electric applications.展开更多
Polymeric dielectrics have wide range of applications in the field of electrical energy storage because of their light weight and easy processing. However, the state-of-the-art polymer dielectrics, such as biaxially o...Polymeric dielectrics have wide range of applications in the field of electrical energy storage because of their light weight and easy processing. However, the state-of-the-art polymer dielectrics, such as biaxially orientated polypropylene, could not meet the demand of minimization of electronic devices because of its low energy density. Recently, poly（vinylidene fluoride） （PVDF） based ferroelectric polymers have attracted considerable interests for energy storage applications because of their high permittivity and high breakdown strength. Unfortunately, the high dielectric loss and/or high remnant polarization of PVDF-based polymers seriously limits their practical applications for electrical energy storage. Since the discovery of relaxor ferroelectric behavior was firstly reported in irradiated poly（vinylidene fluoride- trifluoroethylene） （P（VDF-TrFE）） copolyrner, many strategies have been developed to enhanced the electrical energy storage capability, including copolymerization, grafting, blending and fabricating of multilayer How these methods affect the polymorphs, crystallinity, crystal size of PVDF-based polymers and the connection between these microstructures and their corresponding energy storage properties are discussed in detail.展开更多
We show that absorbed and stored electromagnetic energy are proportional to the reflection group delay in highly reflective dispersive dielectric mirrors over the high-reflectivity band. Our theoretical considerations...We show that absorbed and stored electromagnetic energy are proportional to the reflection group delay in highly reflective dispersive dielectric mirrors over the high-reflectivity band. Our theoretical considerations are verified by numerical simulations performed on different dielectric mirror structures. The revealed pro- portionality between group delay and absorbed energy sets constraint on the application of ultrabroadband and/or dispersive dielectric mirrors in broadband or widely tunable, high-power laser systems.展开更多
基金supported by the National Key R&D Program of China (No.2021YFB3800601)the National Natural Science Foundation of China (No.52102275)+2 种基金China Postdoctoral Science Foundation (Nos.2021TQ0163 and 2021M701821)the Open Youth Fund project of Foshan (South China)Institute of New Materials (No.2021AYF25011)Shuimu Tsinghua Scholar Program。
文摘Ceramics are considered intrinsically brittle at macro scale due to the lack of slip mechanism and pre-existing defects,which greatly limits their potential applications in emerging fields including wearable electronic devices and flexible display.In this contribution,we developed BiFeO_(3)/SiO_(2) dual-networks with exceptional flexibility through a coupled electronetting/electrospun method.The hybrid nanostructured networks endow the material with high tensile strength(2.7 MPa),excellent flexibility(80%recoverable deformation),and robust fatigue resistance performance(maintain flexibility after a 1000-cyclic compress test).After in-situ compounded with dielectric polymer via a layer-by-layer solution casting method,the resultant three-dimensional(3D)composite film exhibits a twice higher dielectric constant(εr)than polyether imide(PEI)film.More importantly,the breakdown strength of the 3D composite film is almost the same as that of the PEI film,resulting in an enhanced energy density of~6.0 J/cm^(3) and a high efficiency of 80%at 4.58 MV/cm.The unique structure,combined with the excellent balance between mechanical and dielectric properties in flexible structures,is of critical significance to the design of flexible functional ceramics and broadening their applications in wearable electric devices.
基金Funded by the National Natural Science Foundation of China(No.51302093)the Fundamental Research Funds for the Central Universities of China(Nos.2014TS046,2015MS017)
文摘（Ba（0.6） Sr（0.4））（0.85） Bi（0.1） TiO3 ceramics doped with x wt%CaZrO3（x= 0-10） were synthesized by solid-state reaction method. The effects of CaZrO3 amount on the dielectric properties and structure of（Ba（0.6）Sr（0.4））（0.85） Bi（0.1） TiO3 ceramics were investigated. X-ray diffraction results indicated a pure cubic perovskite structure for all samples and that the lattice parameter increased till x=5 and then slightly decreased. A homogenous microstructure was observed with the addition of CaZrO3. Dielectric measurements revealed a relaxor-like characteristic for all samples and that the diffusivity γ reached the maximum value of 1.78 at x=5. With the addition of CaZrO3, the dielectric constant dependence on electric field was weakened, insulation resistivity enhanced and dielectric breakdown strength improved obviously and reached 19.9 k V/mm at x=7.5. In virtue of low dielectric loss（tan d〈0.001 5）, moderate dielectric constant（er 〉1 500） and high breakdown strength（Eb 〉17.5 k V/mm）, the CaZrO3 doped（Ba（0.6）Sr（0.4））0.85 Bi（0.1） TiO3 ceramic is a potential candidate material for high power electric applications.
基金support from Special Fund of the National Priority Basic Research of China (No. 2014CB239503)the National Natural Science Foundation of China (Nos. 51522703, 51477096) was acknowledged
文摘Polymeric dielectrics have wide range of applications in the field of electrical energy storage because of their light weight and easy processing. However, the state-of-the-art polymer dielectrics, such as biaxially orientated polypropylene, could not meet the demand of minimization of electronic devices because of its low energy density. Recently, poly（vinylidene fluoride） （PVDF） based ferroelectric polymers have attracted considerable interests for energy storage applications because of their high permittivity and high breakdown strength. Unfortunately, the high dielectric loss and/or high remnant polarization of PVDF-based polymers seriously limits their practical applications for electrical energy storage. Since the discovery of relaxor ferroelectric behavior was firstly reported in irradiated poly（vinylidene fluoride- trifluoroethylene） （P（VDF-TrFE）） copolyrner, many strategies have been developed to enhanced the electrical energy storage capability, including copolymerization, grafting, blending and fabricating of multilayer How these methods affect the polymorphs, crystallinity, crystal size of PVDF-based polymers and the connection between these microstructures and their corresponding energy storage properties are discussed in detail.
基金supported by the National Development Agency of Hungary in the ELI hELIOS preparatory project under Grant No. ELI-09-1-2010-0010
文摘We show that absorbed and stored electromagnetic energy are proportional to the reflection group delay in highly reflective dispersive dielectric mirrors over the high-reflectivity band. Our theoretical considerations are verified by numerical simulations performed on different dielectric mirror structures. The revealed pro- portionality between group delay and absorbed energy sets constraint on the application of ultrabroadband and/or dispersive dielectric mirrors in broadband or widely tunable, high-power laser systems.
