Experimental Study on the Performance and Emission of Chinese Small Agricultural Diesel Engine Fuelled with Methanol/Biodiesel/DTBP

Diesel engine alternative fuels, such as methanol and biodiesel, are beneficial to reduce diesel engine emission. In order to study the influence of methanol and biodiesel on the performance, economy and emission of small agricultural diesel engine, the physical-chemical properties(cetane number, lower heat value(LHV), viscosity, etc.) of methanol and biodiesel were analyzed. The methanol and biodiesel showed good complementary property to some extent. When a large proportion of methanol was added into biodiesel, the cetane number of the methanol/biodiesel blend will be greatly reduced. Since the cetane number of the blend fuel has great influence on the combustion process of diesel engine, after testing for blending ratio of methanol/biodiesel, the blend was prepared with 5%(BM5), 10%(BM10) and 15%(BM15) methanol, respectively. Di-Tert-Butyl Peroxide(DTBP) was chosen as a cetane number improver to be added into methanol/biodiesel blend. 0.25%, 0.50% and 0.75% of DTBP was added into BM15. The bench test was carried out on a 186 FA diesel engine to study the effect of methanol and DTBP on the engine performance and emissions. The results show that, at rated condition, compared with biodiesel, the NO;concentration of BM5, BM10 and BM15 is reduced by 5.02%, 33.85% and 21.24%, and smoke is reduced by 5.56%, 22.22% and 55.56%. However, the engine power is also reduced by 5.77%, 14.23% and 25.41%, and the brake specific energy consumption is increased by 3.31%, 7.78% and 6.37%. The addition of DTBP in methanol/biodiesel could recover the engine power to the level of diesel. DTBP shows good effect on the reduction of the brake specific energy consumption and NO_(x), CO, HC concentration, but a little increase of exhaust smoke.

Analysis of the Emissions and Performance of a Diesel Engine Using Pumpkin Seed Oil Methyl Ester with Different Injection Pressures

Biodiesel fuel is a potential alternative energy source for diesel engines due to its physiochemical characteristics relatively similar to those of traditional diesel fuel.In this study,the performance,emission,and combustion features of a mono cylinder DI diesel engine are assessed using 20%Pumpkin seed methyl ester(PSOME20)and considering varying injection pressures(200,220,240,and 260 bar).The considered Pumpkin seed oil is converted into pumpkin biodiesel by transesterification and then used as fuel.The findings demonstrate that the Brake Thermal Efficiency(BTE)of PSOME20 can be raised by 1.68%,and the carbon monoxide(CO),hydrocarbon(HC),and smoke emanations can be lowered,while oxides of nitrogen(NOx)emissions are increased at an injection pressure(IP)of 240 bar compared to the standard IP of 200 bar.The cylinder pressure and the Heat Release Rate(HRR)become higher at 240 bar,whereas the ignition delay is shortened with respect to PSOME20 at a normal IP of 200 bar.

Validation of an Emission Model for a Marine Diesel Engine with Data from Sea Operations

In this study,a model is developed to simulate the dynamics of an internal combustion engine,and it is calibrated and validated against reliable experimental data,making it a tool that can effectively be adopted to conduct emission predictions.In this work,the Ricardo WAVE software is applied to the simulation of a particular marine diesel engine,a four-stroke engine used in the maritime field.Results from the bench tests are used for the calibration of the model.Finally,the calibration of the model and its validation with full-scale data measured at sea are presented.The prediction includes not only the classic engine operating parameters for a comparison with surveys but also an estimate of nitrogen oxide emissions,which are compared with similar results obtained with emission factors.The calibration of the model made it possible to obtain an overlap between the simulation results and real data with an average error of approximately 7%on power,torque,and consumption.The model provides encouraging results,suggesting further applications,such as in the study on transient conditions,coupling of the engine model with the ship model for a complete simulation of the operating conditions,and optimization studies on consumption and emissions.The availability of the emission data during the sea trial and validated simulation results are the strengths and novelties of this work.

Optimization of the Performance of Marine Diesel Engines to Minimize the Formation of SO_x Emissions

Optimization procedures are required to minimize the amount of fuel consumption and exhaust emissions from marine engines.This study discusses the procedures to optimize the performance of any marine engine implemented in a 0D/1D numerical model in order to achieve lower values of exhaust emissions.From that point,an extension of previous simulation researches is presented to calculate the amount of SOx emissions from two marine diesel engines along their load diagrams based on the percentage of sulfur in the marine fuel used.The variations of SOx emissions are computed in g/k W·h and in parts per million(ppm)as functions of the optimized parameters:brake specific fuel consumption and the amount of air-fuel ratio respectively.Then,a surrogate model-based response surface methodology is used to generate polynomial equations to estimate the amount of SOx emissions as functions of engine speed and load.These developed non-dimensional equations can be further used directly to assess the value of SOx emissions for different percentages of sulfur of the selected or similar engines to be used in different marine applications.

Combined Effect of a Catalytic Reduction Device with Waste Frying Oil-Based Biodiesel on NOx Emissions of Diesel Engines

Internal combustion engines with application in automobiles and other relevant industries constitute significant environmental pollution via the release of toxic exhaust gasses like carbon monoxide (CO), hydrocarbons (HC), particulate matter (PM), and nitrogen oxide (NOx). Engine researchers and manufacturers are challenged to develop external and internal measures to ensure environmentally friendly solutions to accommodate and conform to the growing list of emission standards. Therefore, this work presents an experimental investigation of the NOx emission profile of a diesel engine that is fuelled and fitted with waste frying oil-based biodiesel and catalytic converter. Using a single-cylinder, four-stroke air-cooled CI engine at a constant speed of 1900 rpm and different loadings of 25%, 50%, 75%, and 100%;fitted with a catalytic converter at the exhaust outlet of the engine and linked to a dynamometer and a gas analyser, an experiment was conducted at biodiesel/diesel volume blends of B0 (0/10), B5 (5/95), B20 (20/80), B30 (30/70), B70 (70/30), B100 (100/0);and 30% concentration (v/v), 0.5 litre/hr flow rate of aqueous urea from the catalytic converter. The results show an increasing NOx emission as the biodiesel component increased in the blend. The catalytic converter showed a downward NOx reduction with a significant 68% reduction in efficiency at high exhaust gas temperatures. It is concluded that the combined utilisation of waste frying oil-based biodiesel and the catalytic converter yields substantial NOx emission reduction.

Effects of Hydrogen Addition on Power and Emissions Outputs from Diesel Engines

Energy efficiency and environmental impact have become dominant topics in internal combustion engines development. Among many strategies to improve power and emissions outputs from diesel engines is the partial mix of hydrogen and air as fresh charge components to form extremely lean and homogenous mixture, which resist the spontaneous combustion, while diesel fuel is injected directly inside combustion chamber using the conventional fuel injection systems. This contribution presents an analytical and experimental investigation for the effects of adding hydrogen on diesel engines power output and the reduction of emissions. Parametric analysis is used based on lamped parameters modeling of intake manifold to estimate in cylinder trapped charge. The fuel energy flow to engine cylinders is compared for a range of loads and concentrations to simulate relevant case studies. Diesel fuel reduction for significant range of part-load operation can be achieved by introducing hydrogen, along with power improvement emission reductions are affected positively as well. This is achievable without compromising the engine maximum efficiency, given that most engines are operated at small and part-load during normal driving conditions, which allow for introducing more hydrogen instead of large quantities of excess air during such operation conditions that also can be further improved by charge boosting.

Research on Spray, Combustion and Emission Characteristics for DI Diesel Engine

To improve the combustion chamber shape that can decrease the directed injection （DI） diesel emission, the theories of DI diesel spray, combustion and pollutant formation model are analysed and implemented based on the CFD code FIRE. Results show that the chamber with contracting orifice can get stronger squish swirl intensity. The results of the verification studies show a good accordance with the measurements and reveal that the individual processes of spray, evolution, combustion and pollutant formation are well captured in FIRE. Finally, based on the analyzing and comparing of the calculation results of different chambers, a combustion chamber of contracting orifice geometry with lower emission is proposed.

Research on the Impact of CeO2 -based Solid Solution Metal Oxide on Combustion Performance of Diesel Engine and Emissions

This paper mainly studies on the performance of high-speed diesel engines and emission reduction when the engine uses heavy oil mixed with nanometer-sized additives Ce0.9 Cu0.1 O2 and Ce0.9 Zr0.1 O2.During the test,Indiset 620 combustion analyzer made by AVL,was used to make a real-time survey on the cylinder pressure,the fuel ignition moment,and establish a relation between the change trend of temperature in cylinder and the crank angle.For the engine burning heavy oil and heavy oil mixed with additives,combustion analysis software Indicom and Concerto were used to analyze its combustion process and emission conditions.Experimental investigation shows that nano-sized complex oxide can improve the performance of diesel engine fueled with heavy oil,and reduce the emission of pollutants like NOx and CO,comparing it with the pure heavy oil.According to the consequences of this experiment,the additives improve the overall performance in the use of heavy oil.

Comparative Study of Exhaust Emissions from Diesel and Syngas Powered 3.5 kW Compression Ignition Engine with and without Load

Despite diesel engines being highly efficient, with low fuel consumption and reduced carbon dioxide emissions, they emit relatively high levels of particulate matter and oxides of nitrogen (NOx) due to high exhaust gas temperatures. Engine emissions show the quality and completeness of combustion. This paper aims to present the results of a study comparing exhaust emissions from a diesel and syngas powered engine. Syngas was produced from co-firing coal and biomass in a gasifier then cleaned, cooled and applied as an alternative fuel in an engine operated from 0 - 100% load. Exhaust-emissions were monitored at this load conditions. The exhaust-temperature was measured using thermocouples and the emission gases were analyzed using Testo 350. The emissions were lower and decreased as the engine load increased, except for sulphur dioxide and NOx. The study shows that levels of carbon monoxide, were higher in a range of 46.5 - 80.2%, while carbon dioxide was 3.3 - 18% higher compared to those from diesel. Hydrocarbon emissions were 480 and 1250 ppm for diesel and syngas respectively. The study reveals that the engine operates optimally at higher loads since hydrocarbons and oxides of carbon are low due to complete combustion at higher temperatures. Exhaust gas temperature was higher in the syngas fuel and increased as the engine load increased in the range of 455.83 - 480.03˚C which influenced the formation of NOx. NOx from diesel was found to be higher, ranging from 32.5 - 40.5%, compared to those from syngas with an engine load of 75%. The study observed that relative to diesel, the emissions of sulfur dioxide at 50% engine load were lower in a range of 23.7 - 57.1%. Emissions of hydrocarbons depended on the degree of substitution of diesel and engine load. The study therefore shows that, relative to diesel, emissions decreased when syngas was used with upgraded syngas from Prosporis juliflora presenting as the best alternative followed by Hyphanae compressa, and lastly rice husk. For optimal performance of the syngas fuelled engine, the study reports that the engine should be operated at engine loads above 50% with strategies on NOx emissions considered.

Measurements of Emissions to Air from a Marine Engine Fueled by Methanol

Emissions of exhaust gases and particulate matter from a dual fuel marine engine using methanol as fuel with marine gasoil as pilot fuel have been examined for a ferry during operation.The emission factor for nitrogen oxides is lower than what is typically found for marine gasoil but does not reach the tier III limit.The emissions of particulate matter are significantly lower than for fuel oils and similar to what is found for LNG engines.The main part of the particles can be found in the ultrafine range with the peak being at around 18 nm.About 93%of the particles are evaporated and absorbed when using a thermodenuder,and thus a large majority of the particles are volatile.Methanol is a potential future marine fuel that will reduce emissions of air pollutants and can be made as a biofuel to meet emission targets for greenhouse gases.

Numerical Investigation of the Effects of Rate-Shaped Main Injection on Combustion and Emission in an OPOC Two-Stroke Diesel Engine

The effects of various split injection strategies on the opposed-piston opposed-cylinder(OPOC)diesel engine combustion and emission characteristics have been studied numerically using AVL-Fire CFD tools.The five rate-shaped main injections were used in split injection strategies.The results show that ignition delay from a rectangular injection rate is the shortest.Maximum pressure of the trapezoid injection rate is the largest.And the NOx emission of the rectangular injection rate is the largest.Meanwhile,the soot emission of the trapezoid injection rate is the least among the five injection rates.

Effect of <i>γ</i>-Valerolactone Blending on Engine Performance, Combustion Characteristics and Exhaust Emissions in a Diesel Engine

γ-valerolactone (GVL) is a C5-cyclic ester that can be produced from biomass providing a potentially renewable fuel for transportation and feedstock for the chemical industry. Experiments were performed with fossil diesel (D), D + biodiesel (BD) and D + BD + GVL blends. A four-cylinder, turbocharged direct injection diesel engine was used for the tests. The engine was coupled to a dynamometer to vary the load. CO, NOx, THC and smoke emissions were measured by using a multi-channel gas analyzer. Combustion characteristics were assessed by in-cylinder pressure data with respect to crank angle and the derived heat release rates. Compared with D, and D + BD blends, addition of GVL had relatively little effect on engine performance and NOx emission, but reduced the exhaust concentration of CO, unburned fuel and smoke significantly. The smoke reduction is particularly notable in view of the very recent suggestion that black carbon is the second most important greenhouse gas in the atmosphere next to carbon dioxide. No diesel engine study with GVL has been reported so far.

Effect of Palm Oil Biodiesel Blends on Engine Emission and Performance Characteristics in an Internal Combustion Engine

Increasing global environmental issues and depleting fossil fuel reserves has necessitated the need for alternative and sustainable fuel. In this paper, the effects of biodiesel and its blend on engine emission and performance characteristics in an internal combustion engine were analyzed. Biodiesel derived from the transesterification of raw palm oil was blended with diesel fuel at different proportions designated as PO5 (5% Biodiesel and 95% Diesel), PO10 (10% Biodiesel and 90% Diesel), PO15 (15% Biodiesel and 85% Diesel), PO20 (20% Biodiesel and 80% Diesel), PO50 (50% Biodiesel and 50% Diesel), PO85 (85% Biodiesel and 15% Diesel), and PO100 (100% Biodiesel). A Lombardini 2-cylinder, four-stroke direct injection diesel engine with a compression ratio of 22.8 was developed using Ricardo Wave software in which diesel, palm oil biodiesel blends and pure biodiesel are used in the model, and the obtained results were analysed and presented. The simulation was done under varying engine speeds of 1200 rpm to 3200 rpm at full load condition. Biodiesel and its blends are more environment-friendly and non-toxic when compared to diesel fuel;it also improves the mechanical efficiency of the engines, and above all can also lead to a reduction in poverty among rural dwellers. The obtained results showed that brake specific fuel consumption and brake thermal efficiency increased with palm oil biodiesel blends as compared to diesel fuel which might be a result of biodiesel’s lower heating value, and the increase in thermal energy may be a result of the oxygenation of the biodiesel blend as compared to pure diesel. In terms of brake torque, palm oil biodiesel blends were lesser than diesel fuel. The CO, HC, and NOx emissions of palm oil biodiesel blends decreased significantly compared to that of pure diesel. From this study, palm oil biodiesel emits lesser emissions than diesel fuel and its performance characteristics are similar to diesel fuel. Therefore, palm oil biodiesel can be used without any modifications directly in a diesel engine. In addition, it can also be used as blends as an alternative and sustainable fuel, decreasing air pollution, and increasing environmental sustainability.

Investigation to meet China Ⅱ emission legislation for marine diesel engine with diesel methanol compound combustion technology

In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time,the use of clean and renewable alternative fuel for marine engines is a promising option.In this study,a marine diesel engine,which was modified to run in diesel methanol compound combustion (DMCC) mode,was investigated.After the diesel injection parameters were calibrated,and combined with a sample after-treatment device DOC (diesel oxidation catalyst),the engine could meet the requirements of China II legislation.The overall MSP (methanol substitute percent) reached 54.1%.The value of each pollutant emission was much lower than that in China II emission legislation,and there was almost no methanol and formaldehyde emissions.When methanol was injected into the inlet manifold,the intake air temperature decreased a lot,as well as the exhaust gas temperature,which were beneficial to increase engine thermal efficiency and improve engine room environment.Compared with the engine running in pure diesel mode,when the engine ran in diesel/methanol dual fuel mode,the combustion phase was advanced,and the combustion duration became shorter.Therefore,the engine thermal efficiency increased,and fuel consumption decreased significantly.

Assessment of performance,combustion and emissions characteristics of methanol-diesel dual-fuel compression ignition engine:A review

The energy security concern and rapidly diminishing fossil fuel resources demand the development of renewable and economically attractive fuel for reciprocating engines.Methanol is a promising renewable alternative fuel.Numerous studies have been carried out to explore the various aspects of the utilization of methanol in compression ignition(CI)engine.This review paper presents a detailed analysis of the effect of methanol on performance,combustion,and emission(NOx,CO,HC,and soot)characteristics of conventional CI-engine along with dual-fuel combustion mode.This study focuses on methanol utilization in dual-fuel mode,which is an advanced engine combustion mode.First,methanol production and solubility issues of methanol in diesel are briefly discussed.This study discusses the soot and nano-particle emission from the methanol fueled CI-engine,which is one of the main concerns in the current emission legislation.It was found that the utilization of methanol in CI-engine has the potential to improve the performance and simultaneously with a significant reduction in NOx,CO,soot,and nano-particle emissions in comparison to neat diesel operation.However,unburnt HC emission reduces for methanol-diesel blended fuel operation whereas HC emissions are higher for methanoldiesel dual-fuel operation.

Effects of different combustion modes on the thermal efficiency and emissions of a diesel pilot-ignited natural gas engine under low-medium loads

Research on dual-fuel(DF)engines has become increasingly important as engine manufacturers seek to reduce carbon dioxide emissions.There are significant advantages of using diesel pilot-ignited natural gas engines as DF engines.However,different combustion modes exist due to variations in the formation of the mixture.This research used a simulation model and numerical simulations to explore the combustion characteristics of high-pressure direct injection(HPDI),partially premixed compression ignition(PPCI),and double pilot injection premixed compression ignition(DPPCI)combustion modes under a low-medium load.The results revealed that the DPPCI combustion mode provides higher gross indicated thermal efficiency and more acceptable total hydrocarbon(THC)emission levels than the other modes.Due to its relatively good performance,an experimental study was conducted on the DPPCI mode engine to evaluate the impact of the diesel dual-injection strategy on the combustion process.In the DPPCI mode,a delay in the second pilot ignition injection time increased THC emissions(a maximum value of 4.27g/(kW·h)),decreased the emission of nitrogen oxides(a maximum value of 7.64 g/(kW·h)),increased and then subsequently decreased the gross indicated thermal efficiency values,which reached 50.4%under low-medium loads.

Ultrafine particle emission characteristics of diesel engine by on-board and test bench measurement

This study investigated the emission characteristics of ultra.fine particles based on test bench and on-board measurements. The bench test results showed the ultrafine particle number concentration of the diesel engine to be in the range of （0.56-8.35）×10^8 cm^-3. The on-board measurement results illustrated that the ultra_fine particles were strongly correlated with changes in real-world driving cycles. The particle number concentration was down to 2.0 ×10^6 cm^-3 and 2.7 ×10^7 cm^-3 under decelerating and idling operations and as high as 5.0×10^8 cm^-3 under accelerating operation. It was also indicated that the particle number measured by the two methods increased with the growth of engine load at each engine speed in both cases. The particle number presented a ＂U＂ shaped distribution with changing speed at high engine load conditions, which implies that the particle number will reach its lowest level at medium engine speeds. The particle sizes of both measurements showed single mode distributions. The peak of particle size was located at about 50-80 nm in the accumulation mode particle range. Nucleation mode particles will significantly increase at low engine load operations like idling and decelerating caused by the high concentration of unburned organic compounds.

Combustion and emissions of RP-3 jet fuel and diesel fuel in a single-cylinder diesel engine

The combustion characteristics and emission behaviors of RP-3 jet fuel were studied and compared to commercial diesel fuel in a single-cylinder compression ignition(CI)engine.Engine operational parameters,including engine load(0.6,0.7,and 0.8 MPa indicating the mean effective pressure(IMEP)),the exhaust gas recirculation(EGR)rate(0%,10%,20%,and 30%),and the fuel injection timing(–20,–15,–10,and–5°crank angle(CA)after top dead center(ATDC))were adjusted to evaluate the engine performances of RP-3 jet fuel under changed operation conditions.In comparison to diesel fuel,RP-3 jet fuel shows a retarded heat release and lagged combustion phase,which is more obvious under heavy EGR rate conditions.In addition,the higher premixed combustion fraction of RP-3 jet fuel leads to a higher first-stage heat release peak than diesel fuel under all testing conditions.As a result,RP-3 jet fuel features a longer ignition delay(ID)time,a shorter combustion duration(CD),and an earlier CA50 than diesel fuel.The experimental results manifest that RP-3 jet fuel has a slightly lower indicated thermal efficiency(ITE)compared to diesel fuel,but the ITE difference becomes less noticeable under large EGR rate conditions.Compared with diesel fuel,the nitrogen oxides(NOx)emissions of RP-3 jet fuel are higher while its soot emissions are lower.The NOx emissions of RP-3 can be effectively reduced with the increased EGR rate and delayed injection timing.

Study on Performance and Emission Characteristics of a Compression Ignition Engine Fueled with Diesel-2 Ethoxy Ethyl Acetate Blends

Diesel engines are the major contributors of various types of air polluting gases like carbon monoxide, oxides of nitrogen, smoke, etc. Improvement of fuel properties is essential for suppression of Diesel pollutant emissions along with the optimization of design factors and after treatment equipment. Studies conducted in the past have shown that a significant reduction were obtained in the emissions using oxygenates. This paper investigates the performance and emission characteristics of a direct injection Diesel engine fueled with 2 Ethoxy Ethyl Acetate (EEA) blends. Different fuel blends which contain 5%, 10% and 15% of EEA were prepared and the effect of these blends on performance and emissions were studied on a single cylinder direct injection Diesel engine. The blends were tested under different load conditions and the result showed that EEA blended fuels improves the performance of the engine and reduce the emission level significantly.

Utilization of Waste Cooking Oil as Diesel Fuel and Improvement in Combustion and Emission

Due to high price of Straight Vegetable Oil （SVO） for bio-diesel production, the use of Waste Cooking Oil （WCO） will be cost effective. Furthermore, utilization of WCO will refrain waterways pollution and endanger ecosystem. In Malaysia, more than 50-tone of WCO from various sources was produced every day. This study evaluates combustion performance and exhaust emission characteristics of several WCOs with different sources. Modification on fuel properties has been done to improve the combustion and exhaust emission of using WCO as diesel fuel. Regular diesel fuel also has been used for comparison in the test. A 0.6 liter, single-cylinder, air-cooled direct injection diesel engine was used to perform this experiment. Experiment was done at variable engine loads at constant speed.