Diesel engine alternative fuels, such as methanol and biodiesel, are beneficial to reduce diesel engine emission. In order to study the influence of methanol and biodiesel on the performance, economy and emission of s...Diesel engine alternative fuels, such as methanol and biodiesel, are beneficial to reduce diesel engine emission. In order to study the influence of methanol and biodiesel on the performance, economy and emission of small agricultural diesel engine, the physical-chemical properties(cetane number, lower heat value(LHV), viscosity, etc.) of methanol and biodiesel were analyzed. The methanol and biodiesel showed good complementary property to some extent. When a large proportion of methanol was added into biodiesel, the cetane number of the methanol/biodiesel blend will be greatly reduced. Since the cetane number of the blend fuel has great influence on the combustion process of diesel engine, after testing for blending ratio of methanol/biodiesel, the blend was prepared with 5%(BM5), 10%(BM10) and 15%(BM15) methanol, respectively. Di-Tert-Butyl Peroxide(DTBP) was chosen as a cetane number improver to be added into methanol/biodiesel blend. 0.25%, 0.50% and 0.75% of DTBP was added into BM15. The bench test was carried out on a 186 FA diesel engine to study the effect of methanol and DTBP on the engine performance and emissions. The results show that, at rated condition, compared with biodiesel, the NO;concentration of BM5, BM10 and BM15 is reduced by 5.02%, 33.85% and 21.24%, and smoke is reduced by 5.56%, 22.22% and 55.56%. However, the engine power is also reduced by 5.77%, 14.23% and 25.41%, and the brake specific energy consumption is increased by 3.31%, 7.78% and 6.37%. The addition of DTBP in methanol/biodiesel could recover the engine power to the level of diesel. DTBP shows good effect on the reduction of the brake specific energy consumption and NO_(x), CO, HC concentration, but a little increase of exhaust smoke.展开更多
In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time,the use of clean and renewable alternative fuel for marine engines is a...In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time,the use of clean and renewable alternative fuel for marine engines is a promising option.In this study,a marine diesel engine,which was modified to run in diesel methanol compound combustion (DMCC) mode,was investigated.After the diesel injection parameters were calibrated,and combined with a sample after-treatment device DOC (diesel oxidation catalyst),the engine could meet the requirements of China II legislation.The overall MSP (methanol substitute percent) reached 54.1%.The value of each pollutant emission was much lower than that in China II emission legislation,and there was almost no methanol and formaldehyde emissions.When methanol was injected into the inlet manifold,the intake air temperature decreased a lot,as well as the exhaust gas temperature,which were beneficial to increase engine thermal efficiency and improve engine room environment.Compared with the engine running in pure diesel mode,when the engine ran in diesel/methanol dual fuel mode,the combustion phase was advanced,and the combustion duration became shorter.Therefore,the engine thermal efficiency increased,and fuel consumption decreased significantly.展开更多
The energy security concern and rapidly diminishing fossil fuel resources demand the development of renewable and economically attractive fuel for reciprocating engines.Methanol is a promising renewable alternative fu...The energy security concern and rapidly diminishing fossil fuel resources demand the development of renewable and economically attractive fuel for reciprocating engines.Methanol is a promising renewable alternative fuel.Numerous studies have been carried out to explore the various aspects of the utilization of methanol in compression ignition(CI)engine.This review paper presents a detailed analysis of the effect of methanol on performance,combustion,and emission(NOx,CO,HC,and soot)characteristics of conventional CI-engine along with dual-fuel combustion mode.This study focuses on methanol utilization in dual-fuel mode,which is an advanced engine combustion mode.First,methanol production and solubility issues of methanol in diesel are briefly discussed.This study discusses the soot and nano-particle emission from the methanol fueled CI-engine,which is one of the main concerns in the current emission legislation.It was found that the utilization of methanol in CI-engine has the potential to improve the performance and simultaneously with a significant reduction in NOx,CO,soot,and nano-particle emissions in comparison to neat diesel operation.However,unburnt HC emission reduces for methanol-diesel blended fuel operation whereas HC emissions are higher for methanoldiesel dual-fuel operation.展开更多
基金Sponsored by the Open Project of State Key Laboratory of Internal Combustion Engine Combustion,Tianjin University(Grand No.K2020-12)the Project of Natural Science Foundation of Jiangsu Province(Grant No.BK20200910)+1 种基金the Natural Science Research Projects in Jiangsu Higher Education Institutions(Grant No.20KJB470015)the Provincial Engineering Research Center for New Energy Vehicle Intelligent Control and Simulation Test Technology of Sichuan(Grant No.XNYQ2021-003)。
文摘Diesel engine alternative fuels, such as methanol and biodiesel, are beneficial to reduce diesel engine emission. In order to study the influence of methanol and biodiesel on the performance, economy and emission of small agricultural diesel engine, the physical-chemical properties(cetane number, lower heat value(LHV), viscosity, etc.) of methanol and biodiesel were analyzed. The methanol and biodiesel showed good complementary property to some extent. When a large proportion of methanol was added into biodiesel, the cetane number of the methanol/biodiesel blend will be greatly reduced. Since the cetane number of the blend fuel has great influence on the combustion process of diesel engine, after testing for blending ratio of methanol/biodiesel, the blend was prepared with 5%(BM5), 10%(BM10) and 15%(BM15) methanol, respectively. Di-Tert-Butyl Peroxide(DTBP) was chosen as a cetane number improver to be added into methanol/biodiesel blend. 0.25%, 0.50% and 0.75% of DTBP was added into BM15. The bench test was carried out on a 186 FA diesel engine to study the effect of methanol and DTBP on the engine performance and emissions. The results show that, at rated condition, compared with biodiesel, the NO;concentration of BM5, BM10 and BM15 is reduced by 5.02%, 33.85% and 21.24%, and smoke is reduced by 5.56%, 22.22% and 55.56%. However, the engine power is also reduced by 5.77%, 14.23% and 25.41%, and the brake specific energy consumption is increased by 3.31%, 7.78% and 6.37%. The addition of DTBP in methanol/biodiesel could recover the engine power to the level of diesel. DTBP shows good effect on the reduction of the brake specific energy consumption and NO_(x), CO, HC concentration, but a little increase of exhaust smoke.
基金financial support provided by the Natural Science Foundation of China (No.51676134)。
文摘In order to reduce the pollutant emission and alleviate the pressure of petroleum resources shortage and greenhouse gas emission at the same time,the use of clean and renewable alternative fuel for marine engines is a promising option.In this study,a marine diesel engine,which was modified to run in diesel methanol compound combustion (DMCC) mode,was investigated.After the diesel injection parameters were calibrated,and combined with a sample after-treatment device DOC (diesel oxidation catalyst),the engine could meet the requirements of China II legislation.The overall MSP (methanol substitute percent) reached 54.1%.The value of each pollutant emission was much lower than that in China II emission legislation,and there was almost no methanol and formaldehyde emissions.When methanol was injected into the inlet manifold,the intake air temperature decreased a lot,as well as the exhaust gas temperature,which were beneficial to increase engine thermal efficiency and improve engine room environment.Compared with the engine running in pure diesel mode,when the engine ran in diesel/methanol dual fuel mode,the combustion phase was advanced,and the combustion duration became shorter.Therefore,the engine thermal efficiency increased,and fuel consumption decreased significantly.
基金Financial support of CSIR through SRA under Scientists Pool Scheme to Dr.Mohit Raj Saxena is gratefully acknowledged。
文摘The energy security concern and rapidly diminishing fossil fuel resources demand the development of renewable and economically attractive fuel for reciprocating engines.Methanol is a promising renewable alternative fuel.Numerous studies have been carried out to explore the various aspects of the utilization of methanol in compression ignition(CI)engine.This review paper presents a detailed analysis of the effect of methanol on performance,combustion,and emission(NOx,CO,HC,and soot)characteristics of conventional CI-engine along with dual-fuel combustion mode.This study focuses on methanol utilization in dual-fuel mode,which is an advanced engine combustion mode.First,methanol production and solubility issues of methanol in diesel are briefly discussed.This study discusses the soot and nano-particle emission from the methanol fueled CI-engine,which is one of the main concerns in the current emission legislation.It was found that the utilization of methanol in CI-engine has the potential to improve the performance and simultaneously with a significant reduction in NOx,CO,soot,and nano-particle emissions in comparison to neat diesel operation.However,unburnt HC emission reduces for methanol-diesel blended fuel operation whereas HC emissions are higher for methanoldiesel dual-fuel operation.
