Microwave-prompted Rapid and Efficient Synthesis of Diacyl Thiosemicarbazides and Semicarbazides in Solvent and Catalyst Free Condition

Eighteen 1-aroyl-4-（2-iodobenzoyl）thiosemicarbazides and corresponding semicarbazides were synthesized in excellent yield under microwave irradiation in solvent and catalyst free condition.

Solvent Free One-Pot Synthesis of 1,2,4,5-Tetrasubstituted Imidazoles Catalyzed by Secondary Amine Based Ionic Liquid and Defective Keggin Heteropoly Acid

Secondary amine based ionic liquid and defective Keggin type heteropoly acid (HPA) are separately used for efficient one-pot four-component synthesis of 1,2,4,5-tetrasubstituted imidazoles assisted by microwave (MW). Eco-friendly solvent free procedure, short reaction time, high yield of products and reusability of catalysts are important features of the synthesis. A comparative study on the efficiency of the two catalysts is reported. This work further demonstrates the alternate use of urea, instead of often used ammonium acetate, as source of nitrogen.

Synthesis of amorphous manganese borohydride in the(NaBH_4–MnCl_2) system, its hydrogen generation properties and crystalline transformation during solvent extraction

The mixture of(2NaBH4+ MnCl2) was ball milled in a magneto-mill. No gas release was detected. The XRD patterns of the ball milled mixture exhibit only the Bragg diffraction peaks of the Na Cl-type salt which on the basis of the present X-ray diffraction results and the literature is likely to be a solid solution Na(Cl)x(BH4)(1-x), possessing a cubic Na Cl-type crystalline structure. No presence of any crystalline hydride was detected by powder X-ray diffraction which clearly shows that NaBH4in the initial mixture must have reacted with MnCl2forming a Na Cl-type by-product and another hydride that does not exhibit X-ray Bragg diffraction peaks. Mass spectrometry(MS) of gas released from the ball milled mixture during combined MS/thermogravimetric analysis(TGA)/differential scanning calorimetry(DSC) experiments, confirms mainly hydrogen(H2) with a small quantity of diborane gas, B2H6. The Fourier transform infra-red(FT-IR) spectrum of the ball milled(2NaBH4+ MnCl2) is quite similar to the FT-IR spectrum of crystalline manganese borohydride, c-Mn(BH4)2, synthesized by ball milling, which strongly suggests that the amorphous hydride mechano-chemically synthesized during ball milling could be an amorphous manganese borohydride. Remarkably, the process of solvent filtration and extraction at 42 °C, resulted in the transformation of mechano-chemically synthesized amorphous manganese borohydride to a nanostructured,crystalline, c-Mn(BH4)2hydride.

Asymmetric Synthesis of (-)-1-Trimethylsilyl-ethanol with Immobilized Saccharomyces Cerevisiae Cells in Water/Organic Solvent Diphasic System

Asymmetric synthesis of (-)-1-trimethylsilyl-ethanol with immobilized Saccharomyces cerevisiae cells in water/organic solvent biphasic system was studied. The effects of shake speed, hydrophobicity of organic solvent, volume ratio of water phase to organic phase, pH value of aqueous phase and reaction temperature on the initial reaction rate, maximum yield and enantiomeric excess (ee) of the product were systematically explored. All the above-mentioned factors had significant influence on the reaction. n-Hexane was found to be the best organic solvent for the reaction. The optimum shake speed, volume ratio of water phase to organic phase, pH value and reaction temperature were 150 r.min-1, 1/2, 8 and 30 ℃ respectively, under which the maximum yield and enantiomeric excess of the product were as high as 96.8% and 95.7%, which are 15% and 16% higher than those of the corresponding reaction performed in aqueous phase. To our best knowledge, this is the most satisfactory result obtained.

Microwave-assisted synthesis of asymmetric thiocarbonohydrazones under solvent-free conditions

Six new asymmetric thiocarbonohydrazones 3a-3f were synthesized from following steps： firstly hydrazine hydrate reacted with carbon disulfide to form thiocarbonohydrazide （1） under microwave irradiation. Then compound （1） reacted with ketone and different aldehydes step by step to give 3a-3f with excellent yields under solvent-free conditions using microwave irradiation. Their structures have been determined by elemental analysis, IR, MS and ^1H NMR data. 2009 Qing Han Li. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Montmorillonite K10 Clay Catalyzed One Pot Synthesis of 2,4,6-Tri Substituted Pyridine under Solvent Free Condition

Montmorillonite K10 catalyzed synthesis of 2,4,6 triaryl pyridine under solvent free condition is described. Montmorillonite effectively catalyzed the reaction in good to excellent yields. Using this solid catalyst, the reactions could be carried out in a short period of time with very good yield of triaryl pyridines, up to 97% under solvent free condition. This catalyst could be recycled very easily, which makes this methodology environmentally benign. The catalyst is active over three cycles.

Solvent- and catalyst-free synthesis of dihydropyrimidinthiones in one-pot under focused microwave irradiation conditions

Fifteen dihydropyrimidinthiones have been synthesized by microwave-assisted Biginelli reactions without any solvent or catalyst. The advantages of this novel protocol include the excellent yield, operational simplicity, short time and the avoidance of the use of organic solvents and catalysts.

Strontium chloride-catalyzed one-pot synthesis of 4(3H)-quinazolinones under solvent-free conditions

Strontium chloride was used as an efficient and recyclable catalyst in one-pot condensation of anthranilic acid, ortho esters and amines leading to the formation of 4（3H）-quinazolinone derivatives in good yields at room temperature under solvent-free conditions.

Efficient one-pot synthesis of 14-substituted-14H-dibenzo[a,j]xanthenes using boric acid under solvent-free conditions

Boric acid efficiently catalysed the one-pot reaction of alkyl or aryl aldehydes with 2-naphthol to afford the corresponding 14- alkyl-or aryl-14H-dibenzo[a,j]xanthenes in good yields under solvent-free conditions.

Solvent-free synthesis of some ethyl arylglyoxylates

An efficient and convenient approach to synthesize of ethyl arylglyoxylates by solvent-free grinding was described. Eight ethyl arylglyoxylates had been synthesized by this method, this method provided several advantages such as little pollution, high yield, good selectivity, and simple workup procedure, their structures were confirmed by IR, ^1HNMR.

Effect of solvents on the morphology and structure of barium titanate synthesized by a one-step hydrothermal method

Tetragonal barium titanate was synthesized from barium hydroxide octahydrate and titanium tetrachloride through a simple one-step hydrothermal method.The effect of different solvents on the crystal structure and morphology of barium titanate nanoparticles during the hy-drothermal process was investigated.Except for ethylene glycol/water solvent,impurity-free barium titanate was synthesized in pure water,methanol/water,ethanol/water,and isopropyl alcohol/water mixed solvents.Compared with other alcohols,ethanol promotes the formation of a tetragonal structure.In addition,characterization studies confirm that particles synthesized in methanol/water,ethanol/water,and isopropyl al-cohol/water mixed solvents are smaller in size than those synthesized in pure water.In the case of alcohol-containing solvents,the particle size decreases in the order of isopropanol,ethanol,and methanol.Among all the media used in this study,ethanol/water is considered the optimum reaction media for barium titanate with high tetragonality(defined as the ratio of two lattice parameters c and a,c/a=1.0088)and small aver-age particle size(82 nm),which indicates its great application potential in multilayer ceramic capacitors.

An efficient and green preparation of 5-aminophosphonate substituted pyrimidine nucleosides under solvent-free conditions

An environmentally benign and highly efficient one-pot preparation of α-aminophosphonates under solvent-free conditions was developed. By employing this method, 5-aminophosphonate substituted pyrimidine nucleosides were synthesized in good to excellent yields starting from 5-forrnyl-2＇-deoxyuridine, aniline and dimethylphosphite.

Systematic Selection of Green Solvents for Organic Reacting Systems

The solvent selection methodology developed earlier by. Gani （tal. （Comp. Chem. Eng., 2005）has been extended to handle multi-step reaction systems. The solvent selection problem was formulated based on the methodology guidelines, and solved using ICAS software tool. A list with solvent candidates is generated so that it can be further investigated experimentally. Comments and clarifications from chemists have been incorporated into the problem forrnulations to clarify the role of the solvents in the chemistry and potential reactivity issues. Highly promising results were obtained, in accordance with. industrial process data.

A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization

Dynamic polymers with both physical interactions and dynamic covalent bonds exhibit superior performance,but achieving such dry polymers in an effi-cient manner remains a challenge.Herein,we report a novel organic solvent quenched polymer synthesis using the natural molecule thioctic acid(TA),which has both a dynamic disulfide bond and carboxylic acid.The effects of the solvent type and concentration along with reaction times on the proposed reaction were thoroughly explored for polymer synthesis.Solid-state proton nuclear magnetic resonance(1 H NMR)and first-principles simulations were carried out to investigate the reaction mechanism.They show that the chlorinated solvent can efficiently stabilize and mediate the depolymerization of poly(TA),which is more kinetically favorable upon lowering the temperature.Attributed to the numerous dynamic covalent disulfide bonds and noncovalent hydrogen bonds,the obtained poly(TA)shows high extensibility,self-healing,and reprocessable properties.It can also be employed as an efficient adhesive even on a Teflon surface and 3D printed using the fused deposition modeling technique.This new polymer synthesis approach of using organic solvents as catalysts along with the unique reaction mechanism provides a new pathway for efficient polymer synthesis,especially for multifunctional dynamic polymers.

Novel manganese(Ⅱ)-based deep eutectic solvents: Synthesis and physical properties analysis

Type IV deep eutectic solvent（DES） involves the formation of metal-based eutectics from metal salts or metal salt hydrate in combination with various hydrogen-bond donors（HBDs） such as urea, ethylene glycol or acetamide. In current study, two distinguished approaches were used to synthesize potential DESs, given as the direct heating and the evaporating methods. Successful synthesized DESs were subjected for physical properties characterization by Fourier Transform Infrared（FTIR） Spectroscopy, thermal stability, viscosity,and conductivity analyses. Five novel manganese（II）-based DESs were successfully synthesized as reported in this study. Data obtained indicated that the Mn Cl2á4H2Oáacetamide DES exhibits the lowest freezing point（27.5℃）, highest thermal stability（193℃ point of dehydration）, lowest viscosity（E = 112.8cP） and the highest conductivity（0.12723 mS/cm）. The findings obtained reveal the characteristics, nature or features of synthesized DESs as potential industrial solvents.

Co-templating Ionothermal Synthesis and Crystal Structure of a New Layered Aluminophosphate from a Protic Deep Eutectic Solvent

Protic deep eutectic mixtures are usually composed of organic amine hydrochloride salts and hydrogen bond donors in a specific molar ratio. Ionothermal synthesis of aluminophosphate as an example, herein, was reported for the first time from an urea-based protic eutectic mixture, consisting of diethylammonium chloride （DEACI） and 1,3-dimethyl urea （DMU）. As a result, a new two dimensional aluminophosphate with 4.8-network, [CH3NH3]2[（C2H5）2NH2]Al3（PO4）4, has been successfully synthesized by co-templating the DEA and methylamine in situ generated from the decomposition of DMU in the absence of HF. Compared to alkyl quaternary ammonium salts with more alkyl-group connected with N atom, this kind of organic amine salts are more likely as the struc- ture-directing agents to synthesize aluminophosphates in urea-based deep eutectic mixtures. It was also found that HF is crucial to the phase selectivity, a known compound with chain-like structure was obtained with the single methylamine as a structure-directing agent in the presence of HF. These materials were characterized by powder XRD, SEM, TG-DSC, 13C CP-MAS NMR and CHN analyses.

Synthesis and characterization of novel ternary deep eutectic solvents

A series of room-temperature ternary deep eutectic solvents （TDESs） were prepared from imidazolium halides, zinc halides and amides. The [BMIM]Cl-ZnCl2-acetamide （1：1：1） system shows the lowest freezing point （-60℃） and lowest density in the series. The viscosity and conductivity of TDESs have an exponential relationship with temperature and can be fitted by Arrhenius equation.

A Facile Synthesis of Benzo[h]quinolines via Silica-TsOH-P2O5 Promoted Condensation of 1-Naphthylamines with 1,3-Diketones under Solvent Free Conditions

A facile synthesis of benzo[h]quinolines has been developed via improved Combes reaction. A combination of silica gel, p-toluenesulfonic acid and phosphorus pentoxide was utilized to promote the condensation of 1-naphthylamines with 1,3-diketones under solvent free conditions. In this case, silica gel was used as reaction media, p-toluenesulfonic acid and phosphorus pentoxide were acted as catalyst and dehydrating agent, respectively.

1,3-Dibromo 5,5-dimethylhydantoin (DBH):A novel and efficient catalyst for the synthesis of 14-aryl-14H-dibenzo[a,j] xanthenes under solvent-free conditions

An atom-efficient and environment-friendly approach for the synthesis of aryl-14H-dibenzo[a,j]xanthenes (3a–o) via the one-pot reaction of β-naphthol and aryl aldehydes (1) catalyzed by DBH has been developed. The present approach offers several advantages such as reduced reaction times, moderate temperature, higher yields, solvent free, eco-friendly reaction condition, easy purification and economic availability of the catalyst.