Displacement monitoring in open-pit mines is one of the important tasks for safe management of mining processes.Differential interferometric synthetic aperture radar(DInSAR),mounted on an artificial satellite,has the ...Displacement monitoring in open-pit mines is one of the important tasks for safe management of mining processes.Differential interferometric synthetic aperture radar(DInSAR),mounted on an artificial satellite,has the potential to be a cost-effective method for monitoring surface displacements over extensive areas,such as open-pit mines.DInSAR requires the ground surface elevation data in the process of its analysis as a digital elevation model(DEM).However,since the topography of the ground surface in open-pit mines changes largely due to excavations,measurement errors can occur due to insufficient information on the elevation of mining areas.In this paper,effect of different elevation models on the accuracy of the displacement monitoring results by DInSAR is investigated at a limestone quarry.In addition,validity of the DInSAR results using an appropriate DEM is examined by comparing them with the results obtained by global positioning system(GPS)monitoring conducted for three years at the same limestone quarry.It is found that the uncertainty of DEMs induces large errors in the displacement monitoring results if the baseline length of the satellites between the master and the slave data is longer than a few hundred meters.Comparing the monitoring results of DInSAR and GPS,the root mean square error(RMSE)of the discrepancy between the two sets of results is less than 10 mm if an appropriate DEM,considering the excavation processes,is used.It is proven that DInSAR can be applied for monitoring the displacements of mine slopes with centimeter-level accuracy.展开更多
In theory, land subsidence measurement results with high accuracy can be obtained by using the Differential Interferometry Synthetic Aperture Radar(D-InSAR) at X-band. In practice, however, the measuring accuracy of D...In theory, land subsidence measurement results with high accuracy can be obtained by using the Differential Interferometry Synthetic Aperture Radar(D-InSAR) at X-band. In practice, however, the measuring accuracy of D-InSAR at X-band has been seriously affected by some factors, e.g., decorrelation and high deformation gradient. In this work, the monitoring capability of D-InSAR for coal-mining subsidence is evaluated by using SAR data acquired by TerrraSAR-X system. The SAR image registration method for low coherence image pairs, the denoising phase filter for high noise level interferogram and atmospheric effects mitigation method are the key technical aspects which directly influence the measurement results of D-InSAR at X-band. Thus, a robust image registration method, an improved phase filter method and an atmospheric effects mitigation method are proposed in this paper. The proposed image registration method successfully achieves InSAR coregistration, while the amplitude cross-correlation cannot properly coregister low coherence SAR image pairs. Moreover, the time complexity of the proposed image registration method is obviously slighter than that of the Singular Value Decomposition(SVD) method. The comparing experiment results and the unwrapping phase results show that the improved Goldstein filter is more effective than the original Goldstein filter in noise elimination. The atmospheric influence correction experiment results show that the land subsidence areas with atmospheric influence correction are more clarified than that of without atmospheric influence correction. In summary, the presented methods directly improved the measurement results of D-InSAR at X-band.展开更多
The abrupt occurrence of the Zhongbao landslide is totally unexpected,resulting in the destruction of local infrastructure and river blockage.To review the deformation history of the Zhongbao landslide and prevent the...The abrupt occurrence of the Zhongbao landslide is totally unexpected,resulting in the destruction of local infrastructure and river blockage.To review the deformation history of the Zhongbao landslide and prevent the threat of secondary disasters,the small baseline subsets(SBAS)technology is applied to process 59 synthetic aperture radar(SAR)images captured from Sentinel-1A satellite.Firstly,the time series deformation of the Zhongbao landslide along the radar line of sight(LOS)direction is calculated by SBAS technology.Then,the projection transformation is conducted to determine the slope displacement.Furthermore,the Hurst exponent of the surface deformation along the two directions is calculated to quantify the hidden deformation development trend and identify the unstable deformation areas.Given the suddenness of the Zhongbao landslide failure,the multi-temporal interferometric synthetic aperture radar(InSAR)technology is the ideal tool to obtain the surface deformation history without any monitoring equipment.The obtained deformation process indicates that the Zhongbao landslide is generally stable with slow creep deformation before failure.Moreover,the Hurst exponent distribution on the landslide surface in different time stages reveals more deformation evolution information of the Zhongbao landslide,with partially unstable areas detected before the failure.Two potential unstable areas after the Zhongbao landslide disaster are revealed by the Hurst exponent distribution and verified by the GNSS monitoring results and deformation mechanism discussion.The method combining SBASInSAR and Hurst exponent proposed in this study could help prevent and control secondary landslide disasters.展开更多
基金partially supported by JSPS KAKENHI(Grant No.16H03153)the Limestone Association of Japan。
文摘Displacement monitoring in open-pit mines is one of the important tasks for safe management of mining processes.Differential interferometric synthetic aperture radar(DInSAR),mounted on an artificial satellite,has the potential to be a cost-effective method for monitoring surface displacements over extensive areas,such as open-pit mines.DInSAR requires the ground surface elevation data in the process of its analysis as a digital elevation model(DEM).However,since the topography of the ground surface in open-pit mines changes largely due to excavations,measurement errors can occur due to insufficient information on the elevation of mining areas.In this paper,effect of different elevation models on the accuracy of the displacement monitoring results by DInSAR is investigated at a limestone quarry.In addition,validity of the DInSAR results using an appropriate DEM is examined by comparing them with the results obtained by global positioning system(GPS)monitoring conducted for three years at the same limestone quarry.It is found that the uncertainty of DEMs induces large errors in the displacement monitoring results if the baseline length of the satellites between the master and the slave data is longer than a few hundred meters.Comparing the monitoring results of DInSAR and GPS,the root mean square error(RMSE)of the discrepancy between the two sets of results is less than 10 mm if an appropriate DEM,considering the excavation processes,is used.It is proven that DInSAR can be applied for monitoring the displacements of mine slopes with centimeter-level accuracy.
文摘In theory, land subsidence measurement results with high accuracy can be obtained by using the Differential Interferometry Synthetic Aperture Radar(D-InSAR) at X-band. In practice, however, the measuring accuracy of D-InSAR at X-band has been seriously affected by some factors, e.g., decorrelation and high deformation gradient. In this work, the monitoring capability of D-InSAR for coal-mining subsidence is evaluated by using SAR data acquired by TerrraSAR-X system. The SAR image registration method for low coherence image pairs, the denoising phase filter for high noise level interferogram and atmospheric effects mitigation method are the key technical aspects which directly influence the measurement results of D-InSAR at X-band. Thus, a robust image registration method, an improved phase filter method and an atmospheric effects mitigation method are proposed in this paper. The proposed image registration method successfully achieves InSAR coregistration, while the amplitude cross-correlation cannot properly coregister low coherence SAR image pairs. Moreover, the time complexity of the proposed image registration method is obviously slighter than that of the Singular Value Decomposition(SVD) method. The comparing experiment results and the unwrapping phase results show that the improved Goldstein filter is more effective than the original Goldstein filter in noise elimination. The atmospheric influence correction experiment results show that the land subsidence areas with atmospheric influence correction are more clarified than that of without atmospheric influence correction. In summary, the presented methods directly improved the measurement results of D-InSAR at X-band.
基金support from the National Key R&D Program of China(Grant No.2021YFB3901403)Project supported by graduate research and innovation foundation of Chongqing,China(Grant No.CYS23115)Special project for performance incentive and guidance of scientific research institutions in Chongqing(Grant No.cstc2021jxjl120011)are greatly appreciated。
文摘The abrupt occurrence of the Zhongbao landslide is totally unexpected,resulting in the destruction of local infrastructure and river blockage.To review the deformation history of the Zhongbao landslide and prevent the threat of secondary disasters,the small baseline subsets(SBAS)technology is applied to process 59 synthetic aperture radar(SAR)images captured from Sentinel-1A satellite.Firstly,the time series deformation of the Zhongbao landslide along the radar line of sight(LOS)direction is calculated by SBAS technology.Then,the projection transformation is conducted to determine the slope displacement.Furthermore,the Hurst exponent of the surface deformation along the two directions is calculated to quantify the hidden deformation development trend and identify the unstable deformation areas.Given the suddenness of the Zhongbao landslide failure,the multi-temporal interferometric synthetic aperture radar(InSAR)technology is the ideal tool to obtain the surface deformation history without any monitoring equipment.The obtained deformation process indicates that the Zhongbao landslide is generally stable with slow creep deformation before failure.Moreover,the Hurst exponent distribution on the landslide surface in different time stages reveals more deformation evolution information of the Zhongbao landslide,with partially unstable areas detected before the failure.Two potential unstable areas after the Zhongbao landslide disaster are revealed by the Hurst exponent distribution and verified by the GNSS monitoring results and deformation mechanism discussion.The method combining SBASInSAR and Hurst exponent proposed in this study could help prevent and control secondary landslide disasters.
