Simulation of Fracture Process of Lightweight Aggregate Concrete Based on Digital Image Processing Technology

The mechanical properties and failure mechanism of lightweight aggregate concrete(LWAC)is a hot topic in the engineering field,and the relationship between its microstructure and macroscopic mechanical properties is also a frontier research topic in the academic field.In this study,the image processing technology is used to establish a micro-structure model of lightweight aggregate concrete.Through the information extraction and processing of the section image of actual light aggregate concrete specimens,the mesostructural model of light aggregate concrete with real aggregate characteristics is established.The numerical simulation of uniaxial tensile test,uniaxial compression test and three-point bending test of lightweight aggregate concrete are carried out using a new finite element method-the base force element method respectively.Firstly,the image processing technology is used to produce beam specimens,uniaxial compression specimens and uniaxial tensile specimens of light aggregate concrete,which can better simulate the aggregate shape and random distribution of real light aggregate concrete.Secondly,the three-point bending test is numerically simulated.Thirdly,the uniaxial compression specimen generated by image processing technology is numerically simulated.Fourth,the uniaxial tensile specimen generated by image processing technology is numerically simulated.The mechanical behavior and damage mode of the specimen during loading were analyzed.The results of numerical simulation are compared and analyzed with those of relevant experiments.The feasibility and correctness of the micromodel established in this study for analyzing the micromechanics of lightweight aggregate concrete materials are verified.Image processing technology has a broad application prospect in the field of concrete mesoscopic damage analysis.

Correlations between mineral composition and mechanical properties of granite using digital image processing and discrete element method

This study investigated the correlations between mechanical properties and mineralogy of granite using the digital image processing(DIP) and discrete element method(DEM). The results showed that the X-ray diffraction(XRD)-based DIP method effectively analyzed the mineral composition contents and spatial distributions of granite. During the particle flow code(PFC2D) model calibration phase, the numerical simulation exhibited that the uniaxial compressive strength(UCS) value, elastic modulus(E), and failure pattern of the granite specimen in the UCS test were comparable to the experiment. By establishing 351 sets of numerical models and exploring the impacts of mineral composition on the mechanical properties of granite, it indicated that there was no negative correlation between quartz and feldspar for UCS, tensile strength(σ_(t)), and E. In contrast, mica had a significant negative correlation for UCS, σ_(t), and E. The presence of quartz increased the brittleness of granite, whereas the presence of mica and feldspar increased its ductility in UCS and direct tensile strength(DTS) tests. Varying contents of major mineral compositions in granite showed minor influence on the number of cracks in both UCS and DTS tests.

Analysis of morphological characteristics of gravels based on digital image processing technology and self-organizing map

A comprehensive understanding of spatial distribution and clustering patterns of gravels is of great significance for ecological restoration and monitoring.However,traditional methods for studying gravels are low-efficiency and have many errors.This study researched the spatial distribution and cluster characteristics of gravels based on digital image processing technology combined with a self-organizing map(SOM)and multivariate statistical methods in the grassland of northern Tibetan Plateau.Moreover,the correlation of morphological parameters of gravels between different cluster groups and the environmental factors affecting gravel distribution were analyzed.The results showed that the morphological characteristics of gravels in northern region(cluster C)and southern region(cluster B)of the Tibetan Plateau were similar,with a low gravel coverage,small gravel diameter,and elongated shape.These regions were mainly distributed in high mountainous areas with large topographic relief.The central region(cluster A)has high coverage of gravels with a larger diameter,mainly distributed in high-altitude plains with smaller undulation.Principal component analysis(PCA)results showed that the gravel distribution of cluster A may be mainly affected by vegetation,while those in clusters B and C could be mainly affected by topography,climate,and soil.The study confirmed that the combination of digital image processing technology and SOM could effectively analyzed the spatial distribution characteristics of gravels,providing a new mode for gravel research.

Numerical simulation of direct shear tests on mechanical properties of talus deposits based on self-adaptive PCNN digital image processing

The macro mechanical properties of materials with characteristics of large scale and complicated structural composition can be analyzed through its reconstructed meso-structures.In this work,the meso-structures of talus deposits that widely exist in the hydro-power engineering in the southwest of China were first reconstructed by small particles according to the in-situ photographs based on the self-adaptive PCNN digital image processing,and then numerical direct shear tests were carried out for studying the mechanical properties of talus deposits.Results indicate that the reconstructed meso-structures of talus deposits are more consistent with the actual situation because the self-adaptive PCNN digital image processing has a higher discrimination in the details of soil-rock segmentation.The existence and random distribution of rock blocks make the initial shear stiffness,the peak strength and the residual strength higher than those of the "pure soil" with particle size less than 1.25 cm apparently,but reduce the displacements required for the talus deposits reaching its peak shear strength.The increase of rock proportion causes a significant improvement in the internal friction angle of talus deposit,which to a certain degree leads to the characteristics of shear stress-displacement curves having a changing trend from the plastic strain softening deformation to the nonlinear strain hardening deformation,while an unconspicuous increase in cohesion.The uncertainty and heterogeneity of rock distributions cause the differences of rock proportion within shear zone,leading to a relatively strong fluctuation in peak strengths during the shear process,while movement features of rock blocks,such as translation,rotation and crossing,expand the scope of shear zone,increase the required shear force,and also directly lead to the misjudgment that the lower shear strength is obtained from the samples with high rock proportion.That,however,just explains the reason why the shear strength gained from a small amount of indoor test data is not consistent with engineering practice.

Shape characterization of sand particles based on digital image processing technology

To characterize the shape of sand particles for concrete,a new method is proposed based on digital image processing(known as the DIP method).By analyzing sand particles projection,the length,width and thickness of sand were measured to characterize particle form.The area and perimeter were measured to characterize particle angularity.The results of the DIP method and Vernier caliper were compared to examine the accuracy of the DIP method.The sample size test was conducted to show the statistical significance of shape results measured by the DIP method.The practicality of the DIP method was verified by instance analysis.The results show that aspect ratios and roundness measured by the DIP method are equal to ones by the Vernier caliper.Results by DIP are dependent on the sand particle number,and at least 350 particles should be measured to represent the overall shape property of sand.The results show that the DIP method is able to distinguish the differences in the shape of sand particles.It achieves the direct measurement of sand particle thickness,and the characterization results of sand aspect ratios and roundness are accurate,statistically significant and practical.Therefore,the DIP method is suitable for sand particle shape characterization.

Improvements of Traditional Laser Fraunhofer Diffraction Experiment Using Digital Image Processing Method

We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing fast Fourier transform,inverse fast Fourier transform and the nonlinear leastsquare fitting on the diffraction pattern taken by a camera,the DIP method can quickly return an analytic expression,whose period is used to calculate widths of single slits.By comparing the measured results by the DIP method and the successional difference(SD)method,we find that for a single slit whose width is 60372μm,the DIP method is more accurate.Experimental results show that for single slits with widths between 40μm and 160μm,the relative error of the DIP method is less than 2.78%.Also,the DIP method can be used to measure the diameter of filament and fibres online in real time.

Measuring Structural Parameters of Knitted Fabrics by Digital Image Processing Techniques

In the knitting industry the measurements of the stitch density and the stitch length are usually done manually, which may lead to lower efficiency and less definition and also bring subjective ideas into the test results. In order to improve the effect we can measure with Digital Image Processing Techniques. A piece of sample is scanned into computer and changed into a digital image, which is processed with media filtering. To acquire the power spectrum, the image in the spatial domain is converted into the frequency domain. Picking up the characteristic points describing the stitch density and the stitch length separately in the power spectra and reconstructing them, the values of the stitch density and the stitch length could be calculated. When measuring the stitch length, we should establish a geometric model of the stitch based en the digital image processing, which provides a method to transform the stitch length in the two-dimensien space into the three-dimensien space and to measure the value of the stitch length more accurately. This method also provides a new way to measure the stitch length without damaging the fabric.

Digital image processing of saturation for two-phase flow in planar porous media model

In this paper, the accuracy of estimating stained non-wetting phase saturation using digital image processing is examined, and a novel post-processing approach for calculating threshold is presented. In order to remove the effect of the background noise of images and to enhance the high-frequency component of the original image, image smoothing and image sharpening methods are introduced. Depending on the correct threshold, the image binarization processing is particularly useful for estimating stained non-wetting phase saturation. Calculated saturation data are compared with the measured saturation data during the two-phase flow experiment in an artificial steel planar porous media model. The results show that the calculated saturation data agree with the measured ones. With the help of an artificial steel planar porous media model, digital image processing is an accurate and simple method for obtaining the stained non-wetting phase saturation.

New Optical Triangulation and Digital Image Processing in Measurement

In this paper,a new direct optical triangulation(DOT) for measuring theout-of-plane displacement is given.In order to state its principle,DOT is used to measure a micro-displacement of a rigid body,and at the same time,the method of digital image processing is also given.

Applying Digital Image Processing to Evaluate a Extraction Method of Cartographic Features in Digital Images

A topic studied in cartography is to make the extraction of cartographic features that provide the update of cartographic maps more easily. For this reason many automatic routines were created with the intent to perform the features extraction. Despite of all studies about this, some features cannot be found by the algorithm or it can extract some pixels unduly. So the current article aims to show the results with the software development that uses the original and reference image to calculate some statistics about the extraction process. Furthermore, the calculated statistics can be used to evaluate the extraction process.

3D reconstruction of single rising bubble in water using digital image processing and characteristic matrix

Reconstructing the shape of a bubble will lay a firm foundation for further description of the dynamic characteristics of bubbly flow, especially for a single rising bubble or separate bubbles whose interaction could be neglected. In this case, the rising bubble is usually simulated as an ellipsoid consisting of two semi-eUipsoids up and down. Thus the projected image of a bubble consists of two semi-ellipses. In this paper, a method for reconstructing the ellipsoid bubble model is described following digital image processing, using the Hough transform in 2D ellipse parameter extraction which could cover most of the bubble edge points in the image. Then a method based on characteristic symmetric matrix is described to detect 3D bubble ellipsoid model parameters from 2D ellipse parameters of projection planes. This method can be applied to bubbles rising with low-velocity in static flow field much in conformity with the projection theory and the shape variation of the rising bubble. This method does not need to solve nonlinear equation sets and provides an easy way to calculate the characteristic matrix of a space ellipsoid model for deformed bubble. For bubble application, two assumed conditions and a calibration factor are proposed to simplify calculation and detection. Errors of ellipsoid center and three axes are minor. Errors of the three rotation angles have no negative effect on further study on bubbly flow.

Automatic measurement of three-phase contact angles in pore throats based on digital images

With the help of digital image processing technology, an automatic measurement method for the three-phase contact angles in the pore throats of the microfluidic model was established using the microfluidic water flooding experiment videos as the data source. The results of the new method were verified through comparing with the manual measurement data.On this basis, the dynamic changes of the three-phase contact angles under flow conditions were clarified by the contact angles probability density curve and mean value change curve. The results show that, for water-wetting rocks, the mean value of the contact angles is acute angle during the early stage of the water flooding process, and it increases with the displacement time and becomes obtuse angle in the middle-late stage of displacement as the dominant force of oil phase gradually changes from viscous force to capillary force. The droplet flow in the remaining oil occurs in the central part of the pore throats, without three-phase contact angle. The contact angles for the porous flow and the columnar flow change slightly during the displacement and present as obtuse angles in view of mean values, which makes the remaining oil poorly movable and thus hard to be recovered. The mean value of the contact angle for the cluster flow tends to increase in the flooding process, which makes the remaining oil more difficult to be recovered. The contact angles for the membrane flow are mainly obtuse angles and reach the highest mean value in the late stage of displacement, which makes the remaining oil most difficult to be recovered. After displacement, the remaining oils under different flow regimes are just subjected to capillary force, with obtuse contact angles, and the wettability of the pore throat walls in the microfluidic model tends to be oil-wet under the action of crude oil.

CMOS vision sensor with fully digital image process integrated into low power 1/8-inch chip

A digital still camera image processing system on a chip, different from the video camera system, is pre- sented for mobile phone to reduce the power consumption and size. A new color interpolation algorithm is proposed to enhance the image quality. The system can also process fixed patten noise （FPN） reduction, color correction, gamma correction, RGB/YUV space transfer, etc. The chip is controlled by sensor regis- ters by inter-integrated circuit （I2C） interface. The voltage for both the front-end analog and the pad cir- cuits is 2.8 V, and the volatge for the image signal processing is 1.8 V. The chip running under the external 13.5-MHz clock has a video data rate of 30 frames/s and the measured power dissipation is about 75 roW.

Method for eliminating zero-order image in digital holography

For eliminating the zero-order image in digital holography, a new method using the differential of the hologram intensity instead of the hologram itself for numerical reconstruction is proposed. This method is based on digital image processing. By analyzing the spatial spectrum of the off-axis digital hologram, it theoretically proves that the zero-order image can be effectively eliminated by differential before reconstruction. Then, the detected hologram is processed in the program with differential and reconstruction. Both the theoretical analysis and digital reconstruction results show that it can effectively eliminate the large bright spot in the center of the reconstructed image caused by the zero-order image, improve the image quality significantly, and render a better contrast of the reconstructed image. This method is very simple and convenient due to no superfluous optical elements and requiring only one time record.

Measuring the Condition of Parking Lot by Image Processing

Aim To study the parking management in the condition of vehicles' increasing. Methods The methods of pattern recognition and image processing were used to analyze the eigenvalues of parking lot images. Results The automatic identification of every parking place in the parking plot was realized. The automatic measuring of parked vehicle count and parking lot utilization was completed. Conclusion It can complete the real time recognition, and has some practicabilities.

Application of Digital Image Analysis Method in Metric Screw Thread Metrology

This paper describes the use of computer-aided measurement for external metric screw threads. Thread parameters, including thread pitch, thread angle, pitch diameter and major diameter, were measured with CCD cameras and image analysis software. New technologies such as digital image processing were used to increase the efficiency of measurements. In this study, by reconstructing the toolmaker’s microscope, the computer-aided semi-automated measuring system was developed, which could evaluate the accuracy of screw thread profile. It is concluded that the measurement accuracy is comparable to that of traditional toolmaker’s microscope method. Key words screw threads - quality inspection - accuracy - digital image processing

Wavelet-based gray-level digital image watermarking

The watermarking technique has been proposed as a method by hiding secret information into the image to protect the copyright of multimedia data. But most previous work focuses on the algorithms of embedding one dimensional watermarks or two dimensional binary digital watermarks. In this paper, a wavelet based method for embedding a gray level digital watermark into an image is proposed. By still image decomposition technique, a gray level digital watermark is decompounded into a series of bitplanes. By discrete wavelet transform ( DWT ), the host image is decomposed into multiresolution representations with hierarchical structure. The different bitplanes of the gray level watermark is embedded into the corresponding resolution of the decomposed host image. The experimental results show that the proposed techniques can successfully survive image processing operations and the lossy compression techniques such as Joint Photographic Experts Group (JPEG).

A review of image processing and quantification analysis for solid oxide fuel cell

The purpose of this study is to investigate the approaches applied to analyze solid oxide fuel cell (SOFC) microstructural properties. Both manual and automated image processing approaches applied on SOFC microstructural images which are obtained from several types of tomography such as dual-beam focused ion beam with scanning electron microscopy (FIB-SEM), Electron Backscatter Diffraction (EBSD) and others are discussed. In fact, to achieve a realistic and accurate SOFC microstructural properties, such as average diameter, volume fraction, triple phase boundary (TPB), area interface density and tortuosity factor, the approaches of image processing and quantification are crucial for a reliable image generation for quantification purposes. The microstructural properties are optimized to improve SOFC electrode performance. Therefore, the image processing and quantification approaches are outlined and reviewed. Despite the automated image processing and quantification algorithms significantly outperform manual image processing and quantification approaches in terms of computing speed when evaluating and measuring microstructural properties, the efficiency and productivity are still extremely taken into concern. As a result, image processing and quantification approaches are concluded and presented respectively in this paper.

Three-dimensional finite element simulation and reconstruction of jointed rock models using CT scanning and photogrammetry

The geometry of joints has a significant influence on the mechanical properties of rocks.To simplify the curved joint shapes in rocks,the joint shape is usually treated as straight lines or planes in most laboratory experiments and numerical simulations.In this study,the computerized tomography (CT) scanning and photogrammetry were employed to obtain the internal and surface joint structures of a limestone sample,respectively.To describe the joint geometry,the edge detection algorithms and a three-dimensional (3D) matrix mapping method were applied to reconstruct CT-based and photogrammetry-based jointed rock models.For comparison tests,the numerical uniaxial compression tests were conducted on an intact rock sample and a sample with a joint simplified to a plane using the parallel computing method.The results indicate that the mechanical characteristics and failure process of jointed rocks are significantly affected by the geometry of joints.The presence of joints reduces the uniaxial compressive strength (UCS),elastic modulus,and released acoustic emission (AE) energy of rocks by 37%–67%,21%–24%,and 52%–90%,respectively.Compared to the simplified joint sample,the proposed photogrammetry-based numerical model makes the most of the limited geometry information of joints.The UCS,accumulative released AE energy,and elastic modulus of the photogrammetry-based sample were found to be very close to those of the CT-based sample.The UCS value of the simplified joint sample (i.e.38.5 MPa) is much lower than that of the CT-based sample (i.e.72.3 MPa).Additionally,the accumulative released AE energy observed in the simplified joint sample is 3.899 times lower than that observed in the CT-based sample.CT scanning provides a reliable means to visualize the joints in rocks,which can be used to verify the reliability of photogrammetry techniques.The application of the photogrammetry-based sample enables detailed analysis for estimating the mechanical properties of jointed rocks.

Automated quality inspection of baby corn using image processing and deep learning

The food industry typically relies heavily on manual operations with high proficiency and skills.According to the quality inspection process,a baby corn with black marks or blemishes is considered a defect or unqualified class which should be discarded.Quality inspection and sorting of agricultural products like baby corn are labor-intensive and time-consuming.The main goal of this work is to develop an automated quality inspection framework to differentiate between‘pass’and‘fail’categories based on baby corn images.A traditional image processing method using a threshold principle is compared with relatively more advanced deep learning models.Particularly,Convolutional neural networks,specific sub-types of deep learning models,were implemented.Thorough experiments on choices of network architectures and their hyperparameters were conducted and compared.A Shapley additive explanations(SHAP)framework was further utilized for network interpretation purposes.The EfficientNetB5 networks with relatively larger input sizes yielded up to 99.06%accuracy as the best performance against 95.28%obtained from traditional image processing.Incorporating a region of interest identification,several model experiments,data application on baby corn images,and the SHAP framework are our main contributions.Our proposed quality inspection system to automatically differentiate baby corn images provides a potential pipeline to further support the agricultural production process.