Assessment of Dependent Performance Shaping Factors in SPAR-H Based on Pearson Correlation Coefficient

With the improvement of equipment reliability,human factors have become the most uncertain part in the system.The standardized Plant Analysis of Risk-Human Reliability Analysis(SPAR-H)method is a reliable method in the field of human reliability analysis(HRA)to evaluate human reliability and assess risk in large complex systems.However,the classical SPAR-H method does not consider the dependencies among performance shaping factors(PSFs),whichmay cause overestimation or underestimation of the risk of the actual situation.To address this issue,this paper proposes a new method to deal with the dependencies among PSFs in SPAR-H based on the Pearson correlation coefficient.First,the dependence between every two PSFs is measured by the Pearson correlation coefficient.Second,the weights of the PSFs are obtained by considering the total dependence degree.Finally,PSFs’multipliers are modified based on the weights of corresponding PSFs,and then used in the calculating of human error probability(HEP).A case study is used to illustrate the procedure and effectiveness of the proposed method.

Performance Analysis and Evaluation of Geometric Parameters in Stereo Deflectometry

This paper presents a novel geometric parameters analysis to improve the measurement accuracy of stereo deflectometry.Stereo deflectometry can be used to obtain form information for freeform specular surfaces.A measurement system based on stereo deflectometry typically consists of a fringe-displaying screen,a main camera,and a reference camera.The arrangement of the components of a stereo deflectometry system is important for achieving high-accuracy measurements.In this paper,four geometric parameters of a stereo deflectometry system are analyzed and evaluated:the distance between the main camera and the measured object surface,the angle between the main camera ray and the surface normal,the distance between the fringe-displaying screen and the object,and the angle between the main camera and the reference camera.The influence of the geometric parameters on the measurement accuracy is evaluated.Experiments are performed using simulated and experimental data.The experimental results confirm the impact of these parameters on the measurement accuracy.A measurement system based on the proposed analysis has been set up to measure a stock concave mirror.Through a comparison of the given surface parameters of the concave mirror,a global measurement accuracy of 154.2 nm was achieved.

Establishment and application of performance evaluation model for collection and transportation system of municipal solid waste

On the basis of analyzing the typical waste collection and transportation mode,the evaluation index system for performance of the waste collection and transportation system was proposed with three grades,which related to six factors,such as economic evaluation,high efficient evaluation,environmental impact assessment,resource evaluation,evaluation of security and emergency,evaluation of management and society. With the performance evaluation theory,the performance evaluation model of waste collection and transportation system was constructed,which quantified the grading standard of index and determined the index weight in analytic hierarchy process (AHP). After evaluating the waste collection and transportation system of the main districts of Chongqing city,the results show that the it has an excellent performance evaluation grade with very high performance level of three indices involving evaluation of management and society,environmental impact assessment,evaluation of security and emergency and quite low performance level of two indices that include high efficient evaluation and economic evaluation.

Stability and performance analysis of a jump linear control system subject to digital upsets

This paper focuses on the methodology analysis for the stability and the corresponding tracking performance of a closed-loop digital jump linear control system with a stochastic switching signal. The method is applied to a flight control system. A distributed recoverable platform is implemented on the flight control system and subject to independent digital upsets. The upset processes are used to stimulate electromagnetic environments. Specifically, the paper presents the scenarios that the upset process is directly injected into the distributed flight control system, which is modeled by independent Markov upset processes and independent and identically distributed （IID） processes. A theoretical performance analysis and simulation modelling are both presented in detail for a more complete independent digital upset injection. The specific examples are proposed to verify the methodology of tracking performance analysis. The general analyses for different configurations are also proposed. Comparisons among different configurations are conducted to demonstrate the availability and the characteristics of the design.

Simplified stiffness-based approach for seismic performance evaluation of moment-resisting frame

Based on the concept of stiffness degradation, a damage index of the whole frame and the storey is proposed for the frame seismic performance evaluation. The index is compatible with the non-linear static analysis （e. g. the pushover analysis）, and the structural damage is considered via plastic hinges. Simultaneously, a practical approach is developed to obtain the relationships between the proposed index and earthquake intensities based on the capacity spectrum method. The proposed index is then illustrated through two low-rise reinforced concrete frames, and it is also compared with some other indices. The results indicate that the proposed index is on the safe side and not sensitive to the lateral load pattern. The storey index is helpful to reflect the storey damage and to uncover the position of the weak storey. Finally, the relationship between performance levels and damage index values is also proposed through statistical analysis for the performance-based seismic evaluation.

Performance Evaluation of Public Bus Transportation by Using DEA Models and Shannon’s Entropy:An Example From a Company in a Large City of China

The purpose of this paper is to assess the operational efficiency of a public bus transportation via a case study from a company in a large city of China by using data envelopment analysis(DEA)model and Shannon’s entropy.This company operates 37 main routes on the backbone roads.Thus,it plays a significant role in public transportation in the city.According to bus industry norms,an efficiency evaluation index system is constructed from the perspective of both company operations and passenger demands.For passenger satisfaction,passenger waiting time and passenger-crowding degree are considered,and they are undesirable indicators.To describe such indicators,a superefficient DEA model is constructed.With this model,by using actual data,efficiency is evaluated for each bus route.Results show that the DEA model with Shannon’s entropy being combined achieves more reasonable results.Also,sensitivity analysis is presented.Therefore,the results are meaningful for the company to improve its operations and management.

PERFORMANCE EVALUATION METHOD FOR BUSINESS PROCESS OF MACHINERY MANUFACTURER BASED ON DEA/AHP HYBRID MODEL

A set of indices for performance evaluation for business processes with multiple inputs and multiple outputs is proposed, which are found in machinery manufacturers. Based on the traditional methods of data envelopment analysis （DEA） and analytical hierarchical process （AHP）, a hybrid model called DEA/AHP model is proposed to deal with the evaluation of business process performance. With the proposed method, the DEA is firstly used to develop a pairwise comparison matrix, and then the AHP is applied to evaluate the performance of business process using the pairwise comparison matrix. The significant advantage of this hybrid model is the use of objective data instead of subjective human judgment for performance evaluation. In the case study, a project of business process reengineering （BPR） with a hydraulic machinery manufacturer is used to demonstrate the effectiveness of the DEA/AHP model.

Visualization Analysis for Business Performance of Chinese Listed Companies Based on Gephi

When conducting company performance evaluations,the traditional method cannot reflect the distribution characteristics of the company’s operating conditions in the entire securities market.Gephi is an efficient tool for data analysis and visualization in the era of big data.It can convert the evaluation results of all listed companies into nodes and edges,and directly display them in the form of graphs,thus making up for the defects of traditional methods.This paper will take all the listed companies in the Shanghai and Shenzhen Stock Exchange as the analysis object.First uses tushare and web crawlers to collect the financial statement data of these companies.And then,uses the Economic Value Added model to calculate the EVA of each listed company and build graph data.Next,import the graph data into gephi to generate the distribution graph of all listed companies’performance,and summarize the distribution characteristics of business performance.Finally,select a listed company that you want to analyze in detail,using the traditional DuPont analysis method to conduct micro level visualization analysis of the business performance to find the main factors affecting the company’s operating performance.Incorporating gephi into traditional performance analysis methods will make the results of traditional analytical methods more effective and complete.

Analysis and Simulink Modeling of the Performance of Dynamic Web Server Using JSP and PHP

In recent years, web technology carried on growing and at same time, the number of internet users increased significantly in number. Today, a Web server is capable of processing millions of requests per day, but during the peak period may collapse and becomes critical causing unavailability of the services offered by the servers. That is why Web server performance is a topic of great interest to many researchers. In this paper, we evaluate experimentally the impact of JSP and PHP dynamic content technology: JSP and PHP with access to a database of performance data of Apache Web server. Using the “ApacheBench” performance measurement tool, the approach is to compare the performances of four different configurations of a Web server, such as: Apache Web server implementing JSP technology with access to PostgreSQL database, Apache using PHP technology with the PostgreSQL as database, Apache Web server using the JSP technology with access to MySQL database, finally Apache and PHP with DBMS MySQL. At the end of this article, we also present a Simulink model of Web server performance based on the simple M/M/1 queue. During the modeling, the MATLAB software was used.

Comprehensive Analysis of High Temperature Performance of SBS-modified Asphalt Mixture

Evaluation of high temperature performance of SBS-modified asphalt mixture was presented.Both wheel loaded method and creep method were adopted for two different mixtures and two kinds of specimens with different height,and corresponding indicators were measured.Meanwhile,the correlation between these indicators was thoroughly analyzed and two kinds of mixtures were compared.The experimental results show that there is a good linear relationship between LWT indicators and CT indicators for M-13,while a relatively poor relationship for M-25,especially that between dynamic stiffness and static stiffness and that between dynamic stability and static creep stiffness.Besides,logarithmic relationship between DS and RD has a higher determination coefficient than that for linear relationship.Thus,multi-index evaluation should be taken for synthetically assessing high temperature performance of asphalt mixture.

Quantitative and comparative analysis of hyperspectral data fusion performance

Hyperspectral data fusion technique is the key to hyperspectral data processing in recent years. Many fusion methods have been proposed, but little research has been done to evaluate the performances of different data fusion methods. In order to meet the urgent need, quantitative correlation analysis(QCA) is proposed to analyse and compare the performances of different fusion methods directly from data before and after fusion. Experiment results show that the new method is effective and the results of comparison are in agreement with the results of application.

Simultaneous Determination of Bufadienolides and Qualitative Evaluation for Venenum Bufonis by High Performance Liquid Chromatography

A high performance liquid chromatographic method was used for the simultaneous identification and qualitative evaluation of 12 bufadienolides（resibufogenin, einobufagin, cinobufaginol, arenobufagin, bufalin, bufotalin, gamabufotalin, cinobufotalin, ψ-bufaranogin, desacetylcinobufagin, telocinobufagin and resibufogenol） in Venenum Bufonis. The chromatographic separation was performed on a Dikma C18 analytical column via gradient elution with an aqueous solution of acetonitrile and 0.3% acetic acid at a flow rate of 0.8 mL/min. The method was validated to be acceptable in consideration of linearity（r2 〉 0.9992） and recovery（ranged from 98.9% to 102.0%）. The limits of detection of the bufadienolides were from 0.48 ng for bufalin to 6.00 ng for cinobufotalin. The intra-day and inter-day precisions of the method were evaluated and were less than 3.0%. The method was successfully used to analyze 19 batches of Venenum Bufonis, and the similarity values between batches were calculated by Similarity Evaluation System for Chromatographic Fingerprint of TCM（Version 2004A, Chinese Pharmacopoeia Committee, Beijing）. The results show that the contents of bufadienolides in the medicine and the similarity values based on these bufadienolides varied significantly from batch to batch. This proposed method could be utilized to qualify and control Venenum Bufonis to ensure its safety and efficacy in application.

An Efficient Simulation Tool of Performance Evaluation for Communication Networks

We provide an efficient simulation tool for performance evaluation in communication networks. Not only the general simulation functions-which can be found in some old simulation tools, but also the perturbation function module via the Standard Clock (SC) approach-in which more than 2 perturbation simulation event paths can be constructed parallelly based on a single nominal simulation event path is included in this simulation software platform.

Reservoir water effects on earthquake performance evaluation of Torul Concrete-Faced Rockfill Dam

This study presents earthquake performance analysis of the Torul Concrete-Faced Rockfill （CFR） Dam with two-dimensional dam-soil and dam-soil-reservoir finite element models. The Lagrangian approach was used with fluid elements to model impounded water. The interface elements were used to simulate the slippage between the concrete face slab and the rockfill. The horizontal component of the 1992 Erzincan earthquake, with a peak ground acceleration of 0.515g, was considered in time-history analysis. The Drucker-Prager model was preferred in nonlinear analysis of the concrete slab, rockfill and foundation soil. The maximum principal stresses and the maximum displacements in two opposite directions were compared by the height of the concrete slab according to linear time-history analysis to reveal the effect of reservoir water. The changes of critical displacements and principal stresses with time are also shown in this paper. According to linear and nonlinear time-history analysis, the effect of the reservoir water on the earthquake performance of the Torul CFR Dam was investigated and the possible damage situation was examined. The results show that the hydrodynamic pressure of reservoir water leads to an increase in the maximum displacements and principal stresses of the dam and reduces the earthquake performance of the dam. Although the linear time-history analysis demonstrates that the earthquake causes a momentous damage to the concrete slab of the Torul CFR Dam, the nonlinear time-history analysis shows that no evident damage occurs in either reservoir case.

A“Three-index”Seismic Performance Evaluation Method Based on Sino-US Seismic Code

The Code for Seismic Design of Buildings(GB50011-2010)in 2016 and the method of seismic performance-based design for high-rise buildings in the Guide for Performance-based Design of High-Rise Buildings(TBI2017)are compared.In view of the characteristics and limitations of the seismic performance index set by the Sino-US seismic code,a“three-index”performance index system and evaluation process considering the displacement angle of the structural interlayer,the plastic damage degree of components and the plastic strain of material is put forward;combining the example of time-history analysis of a out-of-code high-rise building under the rare earthquakes is verified.The results show that the method of seismic performance evaluation by using deformation control index in Sino-US seismic code is relatively simple;however,both are lacking in the setting of specific components and the whole structure level respectively.The"three-index"system can comprehensively and quantitatively evaluate the seismic performance of out-of-code high-rise buildings.

Relative Performance Evaluation of Competing Crude Oil Prices’ Volatility Forecasting Models: A Slacks-Based Super-Efficiency DEA Model

With the increasing number of quantitative models available to forecast the volatility of crude oil prices, the assessment of the relative performance of competing models becomes a critical task. Our survey of the literature revealed that most studies tend to use several performance criteria to evaluate the performance of competing forecasting models;however, models are compared to each other using a single criterion at a time, which often leads to different rankings for different criteria—A situation where one cannot make an informed decision as to which model performs best when taking all criteria into account. In order to overcome this methodological problem, Xu and Ouenniche [1] proposed a multidimensional framework based on an input-oriented radial super-efficiency Data Envelopment Analysis (DEA) model to rank order competing forecasting models of crude oil prices’ volatility. However, their approach suffers from a number of issues. In this paper, we overcome such issues by proposing an alternative framework.

Performance Evaluation of Industrial Park Based on DEA - CCR Model

The construction of industrial park is a kind of land resources intensive way, mainly through unified planning, supporting services, so that an industry can be relatively concentrated, saving management costs, resulting in economies of scale. The construction and development of the industrial park has made a positive contribution in accelerating economic development, promoting urban modernization, scientifically allocating land resources. Shanghai is China＇s most developed economic center and the most important industrial base. Shanghai is increasingly becoming an important base of advanced manufacturing industry . Therefore, the performance evaluation of Shanghai Industrial Park Transformation and upgrading of the analysis has a very important significance. This paper analyzes the comprehensive efficiency, cost efficiency, allocation efficiency of Shanghai Industrial Park by analyzing the CCR model of scale-invariable compensation model of DEA static analysis model to analyze the reasons for the low performance of industrial parks in different time periods.

A comprehensive review on the development of data-driven methods for wind power prediction and AGC performance evaluation in wind–thermal bundled power systems

The wind–thermal bundled power system achieves energy complementarity and optimized scheduling, which is an important way to build a new type of energy system. For the safe and stable operation of the wind–thermal bundled power system, accurate data-driven analysis is necessary to maintain real-time balance between electricity supply and demand. By summarizing the development and characteristics of wind–thermal bundled power system in China and different countries, current research in this field can be clearly defined in two aspects: short-term wind power prediction for wind farms and performance evaluation of automatic generation control (AGC) for thermal power generation units. For short-term wind power prediction, it is recommended to focus on historical data preprocessing and artificial intelligence methods. The technical characteristics of different data-driven wind power prediction methods have been compared in detail. For performance evaluation of AGC units, a comprehensive analysis was conducted on current evaluation methods, including the “permitted-band” and “regulation mileage” methods, as well as the issue of evaluation failure in traditional evaluation methods in practical engineering. Finally, the relative optimal dynamic performance of AGC units was discussed and the future trend of data-driven research in wind–thermal bundled power system was summarized.

Design Index and Empirical Analysis of the Evaluation Index System for the Transformation of Scientific and Technological Achievements of Universities in Beijing, Tianjin and Hebei

Promoting the transformation of scientific and technological achievements of universities and colleges in Beijing, Tianjin, and Hebei is an important measure to enhance the level of scientific and technological development in universities, enhance the scientific and technological synergy of Beijing-Tianjiii-Hebei urban agglomeration, practice the coordinated development strategy of Beijing, Tianjin and Hebei, and promote the construction of Xiong'an New District. Based on the scientific and technological input of colleges and universities, the development of science and technology and the output of science and technology, this paper uses Delphi and AHP to construct a Beijing, Tianjin, Hebei University Science and Technology Achievement Transformation Performance Evaluation System from the perspectives of transformation potentials, scientific research activities and achievements transformation of university scientific and technological achievements. An empirical analysis was carried out to provide reference for the government's efficient decision-making and improvement of strategies for transforming scientific and technological achievements in universities.

Reliability Evaluation and Sensitivity Analysis for Multi-state System Based on Time Degradation Measures

The performance and state of multi-state system depend on its structure and different state combinations of the components. In order to evaluate the reliability of multi-state system effectively,a reliability evaluation and sensitivity analysis method based on the time degradation measures was proposed. The equivalence sets of the multi-state system under different output performances were established. The state combinations were classified according to the performance level. The degradation probability models under different states were established,and the new reliability measures,such as dynamic probability of multi-state system,holding time in each state,dynamic expectation function and integrated expectation function of the performance,were proposed and used to implement the dynamic reliability evaluation and sensitivity analysis. A certain diesel engine fuel feeding system was taken as an application example to illustrate the proposed method. The results show that not only the holding time in the desired state of the components and the system can be predicted,but also the best state component in a certain time period can be obtained.