A High-Efficiency Fiber-to-Waveguide Coupler with Low Polarization Dependence Using a Diluted Waveguide in InP Substrate with a 1.55μm Wavelength

We propose a fiber-to-waveguide coupler for side-illuminated p-i-n photodiodes to obtain high responsivity and low polarization dependence that is grown on InP substrate and is suitable for surface hybrid integration in low cost modules. The fiber-to-waveguide coupler is based on a diluted waveguide,which is composed of ten periods of undoped 120nm InP/80nm InGaAsP （1.05μm bandgap） multiple layers. Using the semi-vectorial three dimensional beam propagation method （BPM） with the central difference scheme,the coupling efficiency of fiber-to-waveguide under different conditions is simulated and studied,and the optimized conditions for fiber-to-waveguide coupling are obtained. For TE-like and TM-like modes,the calculated maximum coupling efficiency is higher than 94% and 92% ,respectively. The calculated polarization dependence is less than 0. ldB,showing good polarization independence.

Design and fabrication of a high-performance evanescently coupled waveguide photodetector

In this paper, we present the design, fabrication, and measurement of an evanescently coupled waveguide photode- tector operating at 1.55 gm, which mainly comprises a diluted waveguide, a single-mode rib waveguide and a p-i-n photodiode with an extended optical matching layer. The optical characteristics of this structure are studied by using a three-dimensional finite-difference time-domain （3D FDTD） method. The photodetector exhibits a high 3-dB bandwidth of more than 35 GHz and a responsivity of 0.291 A/W at 1550 nm directly coupled with a cleaved fiber. Moreover, a linear response of more than 72-mW optical power is achieved, where a photocurrent of more than 21 mA is obtained at a reverse bias voltage of 3 V.

InP-based evanescently coupled high-responsivity photodiodes with extremely low dark current density integrated diluted waveguide at 1550 nm

In this paper, we have demonstrated a high performance waveguide photodiode integrated diluted waveguide serving as a fibre-to-waveguide coupler to achieve high coupling efficiency. High responsivity （〉 1 A/W）, high saturation power （〉 45 mA） in the static state and extremely low dark current density （0.04 pA/μm2） with 3 dB bandwidth at 13.4 GHz have been achieved.

Optical matching layer structures in evanescent coupling photodiodes at a wavelength of 1.55 μm:physics,design and simulation

We have studied the optical matching layers （OMLs） and external quantum efficiency in the evanescent coupling photodiodes （ECPDs） integrating a diluted waveguide as a fibre-to-waveguide coupler, by using the semi-vectorial beam propagation method （BPM）. The physical basis of OML has been identified, thereby a general designing rule of OML is developed in such a kind of photodiode. In addition, the external quantum efficiency and the polarization sensitivity versus the absorption and coupling length are analysed. With an optical matching layer, the absorption medium with a length of 30μm could absorb 90% of the incident light at 1.55μm wavelength, thus the total absorption increases more than 7 times over that of the photodiode without any optical matching layer.

High-performance evanescently-coupled uni-traveling-carrier photodiodes

A new evanescently-coupled uni-traveling-carrier photodiode （EC-UTC PD） based on a multimode diluted waveguide （MDW） structure is fabricated, analysed and characterized. Optical and electrical characteristics of the device are investigated. The excellent characteristics are demonstrated such as a responsivity of 0.36 A/W, a bandwidth of 11.5 GHz and a small-signal 1-dB compression current greater than 18 mA at 10 GHz. The saturation current is significantly improved compared with those of similar evanescently-coupled pin photodiodes. The radio frequency （RF） bandwidth can be further improved by eliminating RF losses induced by the cables, the probe and the bias tee between the photodiode and the spectrum analyzer.

A high-efficiency high-power evanescently coupled UTC-photodiode

The effects of the multimode diluted waveguide on quantum efficiency and saturation behavior of the evanescently coupled uni-traveling carrier （UTC） photodiode structures are reported. Two kinds of evanescently coupled uni-traveling carrier photodiodes （EC-UTC-PD） were designed and characterized： one is a conventional EC-UTC-PD structure with a multimode diluted waveguide integrated with a UTC-PD; and the other is a compact EC-UTC-PD structure which fused the multimode diluted waveguide and the UTC-PD structure together. The effect of the absorption behavior of the photodiodes on the efficiency and saturation characteristics of the EC-UTC-PDs is analyzed using 3-D beam propagation method, and the results indicate that both the responsivity and saturation power of the compact EC-UTC-PD structures can be further improved by incorporating an optimized compact multimode diluted waveguide.