Structure-dependent behaviors of diode-triggered silicon controlled rectifier under electrostatic discharge stress

The comprehensive understanding of the structure-dependent electrostatic discharge behaviors in a conventional diode-triggered silicon controlled rectifier （DTSCR） is presented in this paper. Combined with the device simulation, a mathematical model is built to get a more in-depth insight into this phenomenon. The theoretical studies are verified by the transmission-line-pulsing （TLP） test results of the modified DTSCR structure, which is realized in a 65-nm complementary metal-oxide-semiconductor （CMOS） process. The detailed analysis of the physical mechanism is used to provide predictions as the DTSCR-based protection scheme is required. In addition, a method is also presented to achieve the tradeoff between the leakage and trigger voltage in DTSCR.

Low-leakage diode-triggered silicon controlled rectifier for electrostatic discharge protection in 0.18-μm CMOS process

A diode-triggered silicon controlled rectifier (DTSCR) is being developed as an electrostatic discharge (ESD) pro- tection device for low voltage applications. However, DTSCR leaks high current during normal operation due to the Darlington effect of the triggering-assist diode string. In this study, two types of diode string triggered SCRs are designed for low leakage consideration; the modified diode string and composite polysilicon diode string triggered SCRs (MDTSCR & PDTSCR). Com- pared with the conventional DTSCR (CDTSCR), the MDTSCR has a much lower substrate leakage current with a relatively large silicon cost, and the PDTSCR has a much lower substrate leakage current with similar area and shows good leakage performance at a high temperature. Other DTSCR ESD properties are also investigated, especially regarding their layout, triggering voltage and failure current.

Insight into multiple-triggering effect in DTSCRs for ESD protection

The diode-triggered silicon-controlled rectifier（DTSCR） is widely used for electrostatic discharge（ESD） protection in advanced CMOS process owing to its advantages, such as design simplification, adjustable trigger/holding voltage, low parasitic capacitance. However, the multiple-triggering effect in the typical DTSCR device may cause undesirable larger overall trigger voltage, which results in a reduced ESD safe margin. In previous research, the major cause is attributed to the higher current level required in the intrinsic SCR. The related discussions indicate that it seems to result from the current division rule between the intrinsic and parasitic SCR formed in the triggering process. In this letter, inserting a large space into the trigger diodes is proposed to get a deeper insight into this issue. The triggering current is observed to be regularly reduced along with the increased space, which confirms that the current division is determined by the parasitic resistance distributed between the intrinsic and parasitic SCR paths. The theoretical analysis is well confirmed by device simulation and transmission line pulse（TLP） test results. The reduced overall trigger voltage is achieved in the modified DTSCR structures due to the comprehensive result of the parasitic resistance vs triggering current, which indicates a minimized multipletriggering effect.