Distributed modeling of direct solar radiation on rugged terrain of the Yellow River Basin

Due to the influences of local topographical factors and terrain inter-shielding, calculation of direct solar radiation （DSR） quantity of rugged terrain is very complex. Based on digital elevation model （DEM） data and meteorological observations, a distributed model for calculating DSR over rugged terrain is developed. This model gives an all-sided consideration on factors influencing th a resolution of 1 km × 1 km for thDSR. Using the developed model, normals of annual DSR quantity wie Yellow River Basin was generated, with DEM data as the general characterization of terrain. Characteristics of DSR quantity influenced by geographic and topographic factors over rugged terrain were analyzed thoroughly. Results suggest that： influenced by local topographic factors, i.e. azimuth, slope and so on, and annual DSR quantity over mountainous area has a clear spatial difference; annual DSR quantity of sunny slope （or southern slope） of mountains is obviously larger than that of shady slope （or northern slope）. The calculated DSR quantity of the Yellow River Basin is provided in the same way as other kinds of spatial information and can be employed as basic geographic data for relevant studies as well.

The Impact of Sun Radiation on the Thermal Comfort in Highly Glazed Buildings Equipped with Floor Heating Systems

Occupants of highly glazed buildings often suffer from thermal discomfort during the mid-seasons when no shadings are used in such buildings,especially when inertial heating systems are used.The present study is devoted to evaluating the impact of long solar beam exposure on the internal thermal discomfort in glazed spaces when heating is implemented through a floor system.A comprehensive experimental study is carried out using an experimental bi-climatic chamber which is fully monitored and controlled,allowing realistic simulations of the dynamic movement of the sun patch on a heated slab.The findings show that a period of discomfort as long as 8 h can occur,and persist far after the sunbeam exposure stops.During this period,the heating slab’s surface temperature,considered from an average point of view,can attain 34°C while the indoor temperature reaches 26°C.Simulations conducted using a previously developed model display a good fit with the measurements.

Performance Assessment of Motorized Solar Photovoltaic Louvers System Using PVSYST Software

In the realm of technological market penetration of solar photovoltaic louvers(PVL)addressing environmental difficulties and the industrial revolution,a new avenue of renewable energy is introduced.Moreover,solar energy exploitation through building façades was addressed through motorized solar photovoltaic louvers(MPVL).On the other hand,proponents exalted the benefits of MPVL overlooking the typical analyses.In this communication,we attempted to perform a thorough industrial system evaluation of the MPVL.This communication presents a methodology to validate the industrial claims about MPVL devices and their economic efficiency and the insight on how geographical location influences their utilization and augment their potential benefits.This task is carried out by evaluating the extent of solar energy that can be harvested using solar photovoltaic system(PVSYST)software and investigating whether existing product claims are associated with MPVL are feasible in different locations.The performance and operational losses(temperature,internal network,power electronics)were evaluated.To design and assess the performance of different configurations based on the geographical analogy,simulation tools were successfully carried out based on different topographical locations.Based on these findings,various factors affect the employment of MPVL such as geographical and weather conditions,solar irradiation,and installation efficiency.tt is assumed that we successfully shed light and provided insights into the complexity associated with MPVL.

The influence of urban three-dimensional structure and building greenhouse effect on local radiation flux

Accurate measurements of the three-dimensional structure characteristics of urban buildings and their greenhouse effect are important for evaluating the impact of urbanization on the radiation energy budget and research on the urban heat island(UHI)effect.The decrease in evapotranspiration or the increase in sensible heat caused by urbanization is considered to be the main cause of the UHI effect,but little is known about the influence of the main factor“net radiant flux”of the urban surface heat balance.In this study,experimental observation and quantitative model simulation were used to find that with the increase of building surface area after urbanization,the direct solar radiation flux and net radiation flux on building surface areas changed significantly.In order to accurately quantify the relationship between the positive and negative effects,this study puts forward the equivalent calculation principle of“aggregation element”,which is composed of a building’s sunny face and its shadow face,and the algorithm of the contribution of the area to thermal effect.This research clarifies the greenhouse effect of a building with walls of glass windows.Research shows that when the difference between absorption rates of a concrete wall and grass is−0.21,the cooling effect is shown.In the case of concrete walls with glass windows,the difference between absorption rates of a building wall and grass is−0.11,which is also a cooling effect.The greenhouse effect value of a building with glass windows reduces the cooling effect value to 56%of the effect of a building with concrete walls.The simulation of changes in net radiant flux and flux density shows that the greenhouse effect of a 5-story building with windows yields 15.5%less cooling effect than one with concrete walls,and a 30-story building with windows reduces the cooling effect by 23.0%.The simulation results confirmed that the difference in the equivalent absorption rate of the aggregation element is the“director”of cooling and heating effects,and the area of the aggregation element is the“amplifier”of cooling and heating effects.At the same time,the simulation results prove the greenhouse effect of glass windows,which significantly reduces the cold effect of concrete wall buildings.The model reveals the real contribution of optimized urban design to mitigating UHI and building a comfortable environment where there is no atmospheric circulation.

Analysis of Atmospheric Turbidity in Clear Skies at Wuhan,Central China

The Angstr6m turbidity coefficient （β） and Linke turbidity factor （TL） are used to study the atmospheric conditions in Wuhan, Central China, using measureβd direct solar radiation during 2010-2011 in this study. The results show that annual mean β values generally increase from 0.28 in the morning to 0.35 at noon, and then decrease to 0.1 in the late afternoon during the day; annual mean TL generally varies from 3 to 7 in Central China. Both turbidity coefficients have maximum values in spring and summer, while minimum values are observed in winter months. It also reveals that β values show preponderance （52.8%） between 0.15 and 0.35, 78.1% of TL values are between 3.3 and 7.7, which can be compared with other sites around the world. Relationship between turbidity coefficients and main me- teorological parameters （humidity, temperature and wind direction） have been further investigated, it is discovered that the local aerosol concentrations, dust events in northern China and Southwest Monsoon from the Indian Ocean influences the β values in the study area.