Distribution,exploitation,and utilization of intermediate-to-deep geothermal resources in eastern China

The part of China,east of the Hu Huanyong Line,is commonly referred to as eastern China.It is characterized by a high population density and a well-developed economy;it also has huge energy demands.This study assesses and promotes the large-scale development of geothermal resources in eastern China by analyzing deep geological structures,geothermal regimes,and typical geothermal systems.These analyses are based on data collected from geotectology,deep geophysics,geothermics,structural geology,and petrology.Determining the distribution patterns of intermediate-to-deep geothermal resources in the region helps develop prospects for their exploitation and utilization.Eastern China hosts superimposed layers of rocks from three major,global tectonic domainsd namely Paleo-Asian,Circum-Pacific,and Tethyan rocks.The structure of its crust and mantle exhibits a special flyover pattern,with basins and mountains as well as well-spaced uplifts and depressions alternatively on top.The lithosphere in Northeast China and North China is characterized by a thin,low density crust and mantle,whereas the lithosphere in South China has a thin,low density crust and a thick,high density mantle.The middle and upper crust contain geobodies with high conductivity and low velocity,with varying degrees of development that create favorable conditions for the formation and enrichment of geothermal resources.Moderate-to-high temperature geothermal resources are distributed in the MesozoiceCenozoic basins in eastern China,although moderate temperature geothermal resources with low abundance dominate.Porous sandstone reservoirs,karstified fractured-vuggy carbonate reservoirs,and fissured granite reservoirs are the main types of geothermal reservoirs in this region.Under the currently available technical conditions,the exploitation and utilization of geothermal resources in eastern China favor direct utilization over large-scale geothermal power generation.In Northeast China and North China,geothermal resources could be applied for large-scale geothermal heating purposes;geothermal heating could be applied during winter along parts of the Yangtze River while geothermal cooling would be more suitable for summer there;geothermal cooling could also be applied to much of South China.Geothermal resources can also be applied to high value-added industries,to aid agricultural practices,and for tourism.

Low Voltage Direct Current Supply and Utilization System:Definition,Key Technologies and Development

With rapid increase of distributed solar power generation and direct current(DC)based loads such as data centers,electric vehicles(EVs),and DC household appliances,the development trend of the power system is changed from conventional alternate current(AC)to DC.Traditional AC power systems can scarcely meet the development demand of new DC trends,especially since both the generation side and load side are comprised of DC-based electronic power components.With this background,low voltage direct current supply and utilization system(LVDCSUS)has attracted more and more attention for its great advantages over an AC grid to overcome challenges in operation,reliability,and energy loss in renewable energy connection,DC load power utilization and a number of other aspects.However,the definition of the LVDCSUS is still not clear even though many demonstration projects have been put into planning and operation.In order to provide a clear description of LVDCSUS,first,the characteristics of LVDCSUS are illustrated in this paper to show the advance of the LVDCSUS.Second,the potential application scenarios of LVDCSUS are presented in this paper.Third,application of LVDCSUS technologies and some demonstration projects in China are introduced.Besides the development of the LVDCSUS,key technologies,including but not limited to planning and design,voltage levels,control strategies,and key equipment of LVDCSUS,are discussed in this paper.Finally,future application areas and the research orientations of LVDCSUS are analyzed.

Delineation of Near Surface Water Flow Path of Wahawa Geothermal Field by Using 2D Inversion of Resistivity Data

The Wahawa geothermal field which is located in the Eastern province of Sri Lanka has an average temperature of 60°C in its surface manifestations. Since the temperature is considerably high, it is important to explore the feasibility of direct utilization of the energy of this geothermal field. In the present study, electrical resistivity measurements were employed in a 20 km2 region in order to delineate the Wahawa geothermal system and to understand the near-surface fracture pattern. Electrical resistivity mapping of the region has been carried out using Schlumberger array measurements with nominal current array spacing (half spacing) of 150 m and it was observed that there was a path of low ( W) apparent resistivity. These results revealed that the hotsprings resting on a hard rock terrain are presumably composed of metamorphic rocks, suggesting lateral movement of hotwater towards the hotsprings instead of a deep-influx. The area of surface manifestations is not suitable for utilization application due to clustering of the main feeding path. The major hotwater feeding path which is extending in the west direction can be recommended as a possible drilling target for direct utilization applications.

Stress Wave Propagation Analysis on Vortex-Induced Vibration of Marine Risers

To analyze the stress wave propagation associated with the vortex-induced vibration（VIV） of a marine riser, this paper employed a multi-signal complex exponential method. This method is an extension of the classical Prony＇s method which decomposes a complicated signal into a number of complex exponential components. Because the proposed method processes multiple signals simultaneously, it can estimate the “global” dominating frequencies（poles） shared by those signals.The complex amplitude（residues） corresponding to the estimated frequencies for those signals is also obtained in the process. As the signals were collected at different locations along the axial direction of a marine riser, the phenomena of the stress wave propagation could be analyzed through the obtained residues of those signals. The Norwegian Deepwater Program（NDP） high mode test data were utilized in the numerical studies, including data sets in both the in-line（IL） and cross-flow（CF） directions. It was found that the most dominant component in the IL direction has its stress wave propagation along the riser being dominated by a standing wave, while that in the CF direction dominated by a traveling wave.

Two-dimensional gain cross-grating based on spatial modulation of active Raman gain

Based on the spatial modulation of active Raman gain,a two-dimensional gain cross-grating is theoretically proposed.As the probe field propagates along the z direction and passes through the intersectant region of the two orthogonal standingwave fields in the x-y plane,it can be effectively diffracted into the high-order directions,and the zero-order diffraction intensity is amplified at the same time.In comparison with the two-dimensional electromagnetically induced cross-grating based on electromagnetically induced transparency,the two-dimensional gain cross-grating has much higher diffraction intensities in the first-order and the high-order directions.Hence,it is more suitable to be utilized as all-optical switching and routing in optical networking and communication.

Broadband spectrum generation with compact Yb-doped fiber laser by intra-cavity cascaded Raman scattering

We experimentally demonstrate a cascaded Raman scattering continuum, utilizing a compact mode-locked Yb-doped fiber laser based on a nonlinear polarization rotation technique in the all normal dispersion regime.There is no physical filter or polarization controller in the oscillator, and a different mode-locked operation is achieved, corresponding to the extra fiber location in the oscillator. The broadband spectrum generation owes to the enhanced stimulated Raman scattering progress. The maximum output average power and peak power are14.75 n J and 18.0 W, and the short coherence light is suited for optical coherence tomography.