A low-cost invasive microwave ablation antenna with a directional heating pattern

Microwave ablation(MWA) is a cancer treatment method. The tumor tissue absorbs electromagnetic energy, which heats and kills it. A microwave ablation antenna plays a critical role in this process. Its radiation field must completely cover the tumor but not the healthy tissue. At present, the radiation pattern of most invasive ablation antennas is spherical.However, in the clinic, the shape of some tumors may be asymmetrical or the antenna cannot be inserted into the center of the tumor for some other reason. In order to solve these problems, a directional heating antenna for microwave ablation is proposed in this paper. The proposed antenna, operating at 2.45 GHz, consists of a monopole and a reflector. The feed is given by a substrate integrated coaxial line(SICL) and coplanar waveguide(CPW). The omnidirectional radiation field of the monopole is reflected by a reflector that is extended from the outer conductors of the SICL to form a directional radiation field. The impedance matching network is designed on SICL to match the antenna to 50 Ω. The antenna is fabricated using a mature printed circuit board(PCB). The reflection coefficient of the antenna in porcine liver tissue measured by a vector network analyzer shows good agreement with the simulations. Then, an ablation experiment in porcine liver is conducted with power of 10 W for 10 min, and the experimental results confirm the validity of the design.

Directional solidification and physical properties measurements of the zinc-aluminum eutectic alloy

Zn-5wt% Al eutectic alloy was directionally solidified with different growth rates （5.32-250.0μm/s） at a constant temperature gradient of 8.50 K/mm using a Bridgman-type growth apparatus.The values of eutectic spacing were measured from transverse sections of the samples.The dependences of the eutectic spacing and undercooling on growth rate are determined as λ=9.21V-0.53 and ΔT=0.0245V0.53,respectively.The results obtained in this work were compared with the Jackson-Hunt eutectic theory and the similar experimental results in the literature.Microhardness of directionally solidified samples was also measured by using a microhardness test device.The dependency of the microhardness on growth rate is found as Hv=115.64V0.13.Afterwards,the electrical resistivity （r） of the casting alloy changes from 40×10-9 to 108×10-9 Ω·m with the temperature rising in the range of 300-630 K.The enthalpy of fusion （ΔH） and specific heat （Cp） for the Zn-Al eutectic alloy are calculated to be 113.37 J/g and 0.309 J/（g·K）,respectively by means of differential scanning calorimetry （DSC） from heating trace during the transformation from liquid to solid.

Interaction phenomena between liquid droplets and hot particles—Captured via high-speed camera

The interaction of evaporating droplets and hot catalyst particles plays a major role in heterogeneously catalysed reactions. The liquid feed is injected into a gas-solid flow and is mixed with the catalyst. The interaction phenomena determine the evaporation time which should be minimised to keep the reactor vessel small. First measurements with a bed of fixed hot FCC-particles （fluid catalytic cracking） and two model fluids have been conducted. The interactions of ethanol and water droplets with the hot bed surface were captured via a high-speed camera. While the ethanol droplet developed a stable steam cushion due to Leidenfrost phenomena, water showed intense interaction and steam explosions which induced repulsion and atomisation of the droplet.