For the purpose of solving the problem that too large pole tip recession （PTR） is produced in magnetic rigid disk heads by mechanical polishing, a chemical mechanical nano-grinding experiment is performed by using a...For the purpose of solving the problem that too large pole tip recession （PTR） is produced in magnetic rigid disk heads by mechanical polishing, a chemical mechanical nano-grinding experiment is performed by using a float-piece polisher with a tin plate to achieve a more plane and smoother surface. A basal solution, addition agents and a range of pH value are suitably selected to find a kind of slurry, with which the PTR can be controlled on sub-nanometer scale and the giant magnetic resistance （GMR） corrosion and electrostatic damage （ESD） can be avoided. Moreover, the cause that TiC protrudes from the substrate surface of the heads is studied. The appropriate shape and size of diamond abrasive are selected according to the chemical activation of A1203 and TiC in the same slurry. In this way, the chemical and mechanical interactions are optimized and the optimal surface that has small PTR and TiC asperity is achieved. Ultimatily, the chemical mechanical nano-grinding in combination with mechanical nano-grinding is adopted. Sub-nanometer PTR is achieved and the TiC asperity is eliminated by the chemical mechanical nano-grinding with large size ofmonocrystalline followed by mechanical nano-grinding with smalle polycrystalline diamonds.展开更多
The dynamic characteristics of a liquid thin film lubricated head disk system are analyzed. The shear thinning effect is taken into account by introducing modification coefficients into the lubricant rheological mode...The dynamic characteristics of a liquid thin film lubricated head disk system are analyzed. The shear thinning effect is taken into account by introducing modification coefficients into the lubricant rheological model. The perturbation theory is employed to set up the dynamic pressure equation. The Reynolds equation and dynamic pressure equations are solved by finite difference method. The results obtained by the difference methods agree well with that calculated by the close solutions. IBM3370 slider is employed as a physical model. The slider of the system can keep flying at 20 nm height, which promises a potential application on high density recording device.展开更多
When the decrease in the space between magnetic head and disk arrived at 10 nm or less, which is much lower than the mean free path of gas molecules, the gas flow presents distinctive features against the macro featur...When the decrease in the space between magnetic head and disk arrived at 10 nm or less, which is much lower than the mean free path of gas molecules, the gas flow presents distinctive features against the macro features because of the rarefied effects. The modified Reynolds equation considering rarefied gas effect is used to calculate the rarefied region of a negative pressure magnetic head working in the distance of 10 nm. Inverse Knudsen number was adopted to calculating the ratio of the rarefied area. According to the numerical resuks, discussions and analyses are then presented to reveal the rarefied effect on the working performances of a magnetic head. The results show that the magnetic head works in the slip-flow and transition regions and moves to the transition region with the increase in velocity. Furthermore, the maximum rarefied effects occur at the side edges where the flying height is thinner and pressure is lower, rather than in the minimum flying height on the rear. The results also show that with considering the rarefied effects, the load-carrying capacity of the magnetic head and the maximum pressure decrease significantly, but the minimum pressure slightly changes.展开更多
The characteristics of lubricant film at head/disk interface （HDI） are essential to the stability of hard disk drives. In this study, the theoretical models of the lubricant flow and depletion are deduced based on N...The characteristics of lubricant film at head/disk interface （HDI） are essential to the stability of hard disk drives. In this study, the theoretical models of the lubricant flow and depletion are deduced based on Navier-Stokes （NS） and continuity equations. The air bearing pressure on the surface of the lubrication film is solved by the modified Reynolds equation based on Fukui and Kaneko （FK） model. Then the lubricant film deformations for a plane slider and double-track slider are obtained. The equation of lubricant film thickness is deduced with the consideration of van der Waals force, the air bearing pressure, the surface tension, and the external stresses. The lubricant depletion under heat source is simulated and the effects of different working conditions including initial thickness, flying height and the speed of the disk on lubricant depletion are discussed. The main factors that cause the lubricant flow and depletion are analyzed and the ways to reduce the film thickness deformation are proposed. The simulation results indicate that the shearing stress is the most important factor that causes the thickness deformation and other terms listed in the equation have little influence. The thickness deformation is dependent on the working parameter, and the thermal condition evaporation is the most important factor.展开更多
This paper introduces some final results of some key technologies in magnetic disk drives. We dicuss the design and experiment of thin film head, magnetic fluid exclusion seal system, head disk interface and the engin...This paper introduces some final results of some key technologies in magnetic disk drives. We dicuss the design and experiment of thin film head, magnetic fluid exclusion seal system, head disk interface and the engineering appilcations of these technologies in magnetic disk drives.展开更多
基金National Natural Science Foundation of China(No. 50390061).
文摘For the purpose of solving the problem that too large pole tip recession （PTR） is produced in magnetic rigid disk heads by mechanical polishing, a chemical mechanical nano-grinding experiment is performed by using a float-piece polisher with a tin plate to achieve a more plane and smoother surface. A basal solution, addition agents and a range of pH value are suitably selected to find a kind of slurry, with which the PTR can be controlled on sub-nanometer scale and the giant magnetic resistance （GMR） corrosion and electrostatic damage （ESD） can be avoided. Moreover, the cause that TiC protrudes from the substrate surface of the heads is studied. The appropriate shape and size of diamond abrasive are selected according to the chemical activation of A1203 and TiC in the same slurry. In this way, the chemical and mechanical interactions are optimized and the optimal surface that has small PTR and TiC asperity is achieved. Ultimatily, the chemical mechanical nano-grinding in combination with mechanical nano-grinding is adopted. Sub-nanometer PTR is achieved and the TiC asperity is eliminated by the chemical mechanical nano-grinding with large size ofmonocrystalline followed by mechanical nano-grinding with smalle polycrystalline diamonds.
文摘The dynamic characteristics of a liquid thin film lubricated head disk system are analyzed. The shear thinning effect is taken into account by introducing modification coefficients into the lubricant rheological model. The perturbation theory is employed to set up the dynamic pressure equation. The Reynolds equation and dynamic pressure equations are solved by finite difference method. The results obtained by the difference methods agree well with that calculated by the close solutions. IBM3370 slider is employed as a physical model. The slider of the system can keep flying at 20 nm height, which promises a potential application on high density recording device.
基金supported by National Basic Research and Development Program of China (973 Program, Grant No. 2003CB716205)
文摘When the decrease in the space between magnetic head and disk arrived at 10 nm or less, which is much lower than the mean free path of gas molecules, the gas flow presents distinctive features against the macro features because of the rarefied effects. The modified Reynolds equation considering rarefied gas effect is used to calculate the rarefied region of a negative pressure magnetic head working in the distance of 10 nm. Inverse Knudsen number was adopted to calculating the ratio of the rarefied area. According to the numerical resuks, discussions and analyses are then presented to reveal the rarefied effect on the working performances of a magnetic head. The results show that the magnetic head works in the slip-flow and transition regions and moves to the transition region with the increase in velocity. Furthermore, the maximum rarefied effects occur at the side edges where the flying height is thinner and pressure is lower, rather than in the minimum flying height on the rear. The results also show that with considering the rarefied effects, the load-carrying capacity of the magnetic head and the maximum pressure decrease significantly, but the minimum pressure slightly changes.
基金Project supported by the National Natural Science Foundation of China(Grant No.51275124)
文摘The characteristics of lubricant film at head/disk interface （HDI） are essential to the stability of hard disk drives. In this study, the theoretical models of the lubricant flow and depletion are deduced based on Navier-Stokes （NS） and continuity equations. The air bearing pressure on the surface of the lubrication film is solved by the modified Reynolds equation based on Fukui and Kaneko （FK） model. Then the lubricant film deformations for a plane slider and double-track slider are obtained. The equation of lubricant film thickness is deduced with the consideration of van der Waals force, the air bearing pressure, the surface tension, and the external stresses. The lubricant depletion under heat source is simulated and the effects of different working conditions including initial thickness, flying height and the speed of the disk on lubricant depletion are discussed. The main factors that cause the lubricant flow and depletion are analyzed and the ways to reduce the film thickness deformation are proposed. The simulation results indicate that the shearing stress is the most important factor that causes the thickness deformation and other terms listed in the equation have little influence. The thickness deformation is dependent on the working parameter, and the thermal condition evaporation is the most important factor.
文摘This paper introduces some final results of some key technologies in magnetic disk drives. We dicuss the design and experiment of thin film head, magnetic fluid exclusion seal system, head disk interface and the engineering appilcations of these technologies in magnetic disk drives.
