Photodissociation of HOD via the C1B1 State： OD/OH Branching Ratio and OD Bond Dissociation Energy

Photodissociation of jet-cooled HOD via the C state around 124 nm has been studied using the H（D）-atom Rydberg tagging time-of-flight technique. Rotational state resolved action spectrum and the product translational energy distribution spectra have been recorded for both D＋OH and H＋OD dissociation channels. Product channel OH/OD branching ratios for the individual C-X rotational transition have been determined. A comparison is also given with the B-X and A-X transitions. In addition, the dissociation energy of the OD bond in HOD has been determined accurately to be 41751.3±5 cm-1.

Ab initio calculations of accurate dissociation energy and analytic potential energy function for the second excited state B^1∏ of ^7LiH

The reasonable dissociation limit of the second excited singlet state B1∏ of ^7LiH molecule is obtained. The accurate dissociation energy and equilibrium geometry of the B^∏ state are calculated using a symmetry-adaptedcluster configuration interaction method in full active space. The whole potential energy curve for the B1H state is obtained over the internuclear distance ranging from about 0.10 nm to 0,54 nm, and has a least-square fit to the analytic Murrell-Sorbie function form. The vertical excitation energy is calculated from the ground state to the B^1∏ state and compared with previous theoretical results. The equilibrium internuclear distance obtained by geometry optimization is found to be quite different from that obtained by single-point energy scanning under the same calculation condition. Based on the analytic potential energy function, the harmonic frequency value of the B^1∏ state is estimated. A comparison of the theoretical calculations of dissociation energies, equilibrium interatomic distances and the analytic potential energy function with those obtained by previous theoretical results clearly shows that the present work is more comprehensive and in better agreement with experiments than previous theories, thus it is an improvement on previous theories.

Ab initio calculation of accurate dissociation energy, potential energy curve and dipole moment function for the A^1∑＋ state ^7LiH molecule

The reasonable dissociation limit of the A^1∑＋ state ^7LiH molecule is obtained. The accurate dissociation energy and the equilibrium geometry of this state are calculated using a symmetry-adapted-cluster configuration-interaction method in complete active space for the first time, The whole potential energy curve and the dipole moment function for the A^1∑＋ state are calculated over a wide internuclear separation range from about 0.1 to 1.4 nm. The calculated equilibrium geometry and dissociation energy of this potential energy curve are of Re=0.2487 nm and De=1.064eV, respectively. The unusual negative values of the anharmonicity constant and the vibration-rotational coupling constant are of ωeXe=-4.7158cm^-1 and αe=0.08649cm^-1, respectively. The vertical excitation energy from the ground to the A^1∑＋ state is calculated and the value is of 3.613eV at 0.15875nm （the equilibrium position of the ground state）. The highly anomalous shape of this potential energy curve, which is exceptionally flat over a wide radial range around the equilibrium position, is discussed in detail. The harmonic frequency value of 502.47cm^-1 about this state is approximately estimated. Careful comparison of the theoretical determinations with those obtained by previous theories about the A^1∑＋ state dissociation energy clearly shows that the present calculations are much closer to the experiments than previous theories, thus represents an improvement.

Prediction of Bond Dissociation Energy for Organic Molecules Based on a Machine-Learning Approach

Bond dissociation energy(BDE),which refers to the enthalpy change for the homolysis of a specific covalent bond,is one of the basic thermodynamic properties of molecules.It is very important for understanding chemical reactivities,chemical properties and chemical transformations.Here,a machine learning-based comprehensive BDE prediction model was established based on the iBonD experimental BDE dataset and the calculated BDE dataset by St.John et al.Differential Structural and PhysicOChemical(D-SPOC)descriptors that reflected changes in molecules'structural and physicochemical features in the process of bond homolysis were designed as input features.

Studies on heteronuclear diatomic molecular dissociation energies using algebraic energy method

The algebraic energy method （AEM） is applied to the study of molecular dissociation energy De for 11 heteronuclear diatomic electronic states： a^3∑＋ state of NaK, X^2∑＋ state of XeBr, X^2∑＋ state of HgI, X^1∑＋ state of LiH, A3∏（1） state of IC1, X^1∑＋ state of CsH, A（3∏1） and B0＋（3∏） states of CIF, 21∏ state of KRb, X^1∑＋ state of CO, and c^3∑＋ state of NaK molecule. The results show that the values of De computed by using the AEM are satisfactorily accurate compared with experimental ones. The AEM can serve as an economic and useful tool to generate a reliable De within an allowed experimental error for the electronic states whose molecular dissociation energies are unavailable from the existing literature

Ab initio calculations on accurate dissociation energy, equilibrium geometry, and analytic potential energy function for the 6~3Π state of ~7LiH molecule

The accurate dissociation energy and equilibrium geometry of the ball state of ^7LiH molecule is calculated using a symmetry-adapted-cluster configuration-interaction method in full active space. And the calculated results are 0.2580 eV and 0.1958 nm for the dissociation energy and equilibrium geometry, respectively. The whole potential energy curve for the b^3∏ state is also calculated over the internuclear separation range from about 0.10 to 0.54 nm. The results are fitted by the Murrell-Sorbie function. It is found that the Murrell-Sorbie function form, which is mainly used to fit the ground-state potential energy function, is well suitable for the excited triplet b^3∏ state. The vertical excitation energy from the ground state to the b^3∏ state is calculated to be 4.233 eV. Based on the analytic potential energy function, the harmonic frequency of 610.88 cm^-1 about this state is firstly estimated. Compared with other theoretical results, this work is the most complete effort to deal with the analytic potential energy function and the harmonic frequency of this state.

Accurate studies on the full vibrational energy spectra and molecular dissociation energies for some electronic states of halogen molecule

This paper obtains accurate vibrational spectroscopic constants and full vibrational energy spectrum by the al- gebraic method （AM） for some electronic states of halogen diatomic molecules. Motivated by the recent success of obtaining the dissociation energies of Li2 molecule by using a new analytical formula, it further extends the formula to study the dissociation energies of halogen diatomic molecules. The results show that the AM spectrum and the theoretical dissociation energies agree well with RKR data and experimental data respectively.

Diffusion Monte Carlo Study of Bond Dissociation Energies for BH2, B（OH）2, BCl2, and BCI

On basis of bond dissociation energies （BDEs） for BH2, B（OH）2, BCl2, and BCl, the diffusion Monte Carlo （DMC） method is applied to explore the BDEs of HB-H, HOB-OH, ClB-Cl, and B-Cl. The effect of the choice of orbitals, as well as the backflow transformation, is studied. The Slater-Jastrow DMC algorithm gives BDEs of 359.1±0.12 kJ/mol for HB-H, 410.5±0.50 kJ/mol for HOB-OH, 357.8±1.46 kJ/mol for ClB-Cl, and 504.5±0.96 kJ/mol for B-Cl using B3PW91 orbitals and similar BDEs when B3LYP orbitals are used. DMC with backflow corrections （BF-DMC） gives a HB-H BDE of 369.9±0.12 kJ/mol which is close to one of the available experimental value （375.8 kJ/mol）. In the case of HOB-OH BDE, the BF-DMC calculation is 446.04-1.84 k J/mol that is closer to the experimental BDE. The BF-DMC BDE for ClB-Cl is 343.2±2.34 kJ/mol and the BF-DMC B-Cl BDE is 523.3±0.33 kJ/mol, which are close to the experimental BDEs, 341.9 and 530.0 kJ/mol, respectively.

Is HOMO Energy Level a Good Parameter to Characterize Antioxidant Activity

Semiempirical quantum chemical method AM1 was employed to calculate the highest occupied molecular orbital (HOMO) energy levels (E-HOMO) for various types of antioxidants. It was verified that the correlation between logarithm of free radical scavenging rate constants (1gks) and E-HOMO substantially arises from the correlation between E-HOMO and O-H bond dissociation energies (BDE) of antioxidants. Furthermore, E-HOMO were poorly correlated with the logarithm of relative free radical scavenging rate constants (1gk(3)/k(1)) for various types of antioxidants that possess complex structures (r = 0.5602). So in a broad sense, E-HOMO was not an appropriate parameter to characterize the free radical scavenging activity of antioxidants.

Analytical Potential Energy Function,Spectroscopic Constants and Vibrational Levels for A^1E_u^+ State of Dimer ~7Li_2

The symmetry-adapted-duster configuration-interaction method is used to investigate the spectroscopicproperties of ~7Li_2(A^1∑_u^+) over the internuclear distance ranging from 2.4ao to 37ao.The complete potential energycurves are calculated at numbers of basis sets.All the ab initio calculated points are fitted to the analytic MurrellSorbie function and then employed to compute the spectroscopic constants.By comparison,the spectroscopic constantsreproduced by the potential attained at D95(3df,3pd) are found to be very close to the experiments,a^d the values (T_e,D_e,R_e,ω_e,ω_eχ_e,α_e and B_e) are of 1.732 93 eV,1.161 36 eV,0.313 27 nm,251.95 cm^(-1),1.623 cm^(-1),0.005 35 cm^(-1),and0.490 cm^(-1),respectively.With the potential obtained at D95(3df,3pd),the totally 75 vibrational states are found whenJ=0.The vibrational levels,the classical turning points and the inertial rotation constants of the first 68 vibrationalstates are calculated for the first time and compared with the available measurements.Good agreement is obtained.The centrifugal distortion constants of the first 32 vibrational states are also reported for the first time.The reasonabledissociation limit for ~7Li_2(A^1∑_u^+) is deduced using the calculated results at present.

The evaluation of bond dissociation energies for NO2 scission in nitro compounds using density functional and complete basis set methods

By using the density functional theory （B3LYP） and four highly accurate complete basis set （CBS-Q, CBS-QB3, CBS-Lq, and CBS-4M）ab initio methods, the X（C, N, O）-NO2 bond dissociation energies （BDEs） for CH3NO2, C2H3NO2, C2H5NO2, HONO2, CH3ONO2, C2H5ONO2, NH2NO2 （CH3）2NNO2 are computed. By comparing the computed BDEs and experimental results, it is found that the B3LYP method is unable to predict satisfactorily the results of bond dissociation energy （BDE）; however, all four CBS models are generally able to give reliable predication of the X（C, N, O）-NO2 BDEs for these nitro compounds. Moreover, the CBS-4M calculation is the least computationally demanding among the four CBS methods considered, Therefore, we recommend CBS-4M method as a reliable method of computing the BDEs for this nitro compound system.

Accurate studies of dissociation energies and vibrational energies on alkali metals

This paper studies full vibrational spectra {Ev} and molecular dissociation energies De by using conventional least-squares （LS） fitting and an algebraic method （AM） proposed recently for 10 diatomic electronic states of ^7Li2, Na2, NaK and NaLi molecules based on some known experimental vibrational energies in a subset [Ev^expt] respectively. Studies show that： （1） although both the full AM spectrum {Ev^AM} and the LS spectrum {Ev^LS} can reproduce the known experimental energies in [Ev^expt], the {EAM} is superior to the {Ev^LS} in that the high-lying AM vibrational energies which may not be available experimentally have better or much better accuracy than those LS counterparts in {Ev^LS}, and so is the AM dissociation energy De^AM; （2） the main source of the errors in the data obtained by using the LS fitting is that the fitting which is just a pure mathematical process does not use any physical criteria that must be satisfied by the full vibrational spectrum, while the AM method does. This study suggests that when fitting or solving a physical equation using a set of source data, it is important not only to apply a proper mathematical tool, but also to use correct physical criteria which measure the physical properties of the data, kick out those data having bigger errors, and impose conditional convergence on the numerical process.

Quantum chemical calculations of bond dissociation energies for COOH scission and electronic structure in some acids

Quantum chemical calculations are performed to investigate the equilibrium C-COOH bond distances and the bond dissociation energies（BDEs） for 15 acids.These compounds are studied by utilizing the hybrid density functional theory（DFT）（B3LYP,B3PW91,B3P86,PBE1PBE） and the complete basis set（CBS-Q） method in conjunction with the 6311G^＊＊ basis as DFT methods have been found to have low basis sets sensitivity for small and medium molecules in our previous work.Comparisons between the computational results and the experimental values reveal that CBS-Q method,which can produce reasonable BDEs for some systems in our previous work,seems unable to predict accurate BDEs here.However,the B3P86 calculated results accord very well with the experimental values,within an average absolute error of 2.3 kcal/mol.Thus,B3P86 method is suitable for computing the reliable BDEs of C-COOH bond for carboxylic acid compounds.In addition,the energy gaps between the highest occupied molecular orbital（HOMO） and the lowest unoccupied molecular orbital（LUMO） of studied compounds are estimated,based on which the relative thermal stabilities of the studied acids are also discussed.

Density Functional Calculations of C–NO_2 Bond Dissociation Energies for Nitroalkanes Molecules

Bond dissociation energies for the removal of nitrogen dioxide group in some nitroalkane energetic materials have been calculated by using the three hybrid density functional theory （DFT） methods B3LYP, B3PW91 and B3P86 with 6-31g^＊＊ and 6-311g^＊＊ basis sets. The computed BDEs have been compared with the available experimental results. It is found that the B3P86 method with 6-31g^＊＊ and 6-311g^＊＊ basis sets can obtain satisfactory bond dissociation energies （BDEs）, which are in extraordinary agreement with the experimental data. Considering the smaller mean absolute deviation and maximum difference, the reliable B3P86/6-311g^＊＊ method was recommended to compute the BDEs for the removal of nitrogen dioxide group in the nitroalkane energetic materials. Using the method, the BDEs of 8 other nitroalkane energetic materials have been calculated and the maximum difference from experimental value is 1.76 kcal.mo1^-1 （for the BDE of tC4Hg-NOz）, which further proves the reliability of B3P86/6-311g^＊＊ method. In addition, it is noted that the BDEs of C-NO2 bond change slightly for main chain nitroalkane compounds with the maximum difference of only 3.43 kcal mo1^-1.

Theoretical Study of the N-NO_2 Bond Dissociation Energies for Energetic Materials with Density Functional Theory

The N-NO2 bond dissociation energies （BDEs） for 7 energetic materials were computed by means of accurate density functional theory （B3LYP, B3PW91 and B3P86） with 6-31G＊＊ and 6-311G＊＊ basis sets. By comparing the computed energies and experimental results, we find that the B3P86/6-311G＊＊ method can give good results of BDE, which has the mean absolute deviation of 1.30kcal/mol. In addition, substituent effects were also taken into account. It is noted that the Hammett constants of substituent groups are related to the BDEs of the N-NO2 bond and the bond dissociation energies of the energetic materials studied decrease when increasing the number of NO2 group.

Potential energy surfaces of ozone in the ground state

Equilibrium parameters of ozone, such as equilibrium geometry structure parameters, force constants and dissociation energy are presented by CBS-Q ab initio calculations. The calculated equilibrium geometry structure parameters and energy are in agreement with the corresponding experimental values. The potential energy function of ozone with a C2v symmetry in the ground state is described by the simplified Sorbie-Murrell many-body expansion potential function according to the ozone molecule symmetry. The contour of bond stretching vibration potential of an O3 in the ground state, with a bond angle （θ） fixed, and the contour of O3 potential for O rotating around O1-O （R1）, with O1-O bond length taken as the one at equilibrium, are plotted. Moreover, the potentials are analysed.

Accurate Analytic Potential Energy Function and Spectroscopic Study for G^1Ⅱg State of Dimer ^7Li2

The reasonable dissociation limit for the G^1Ⅱg, state of dimer ^7Li2 is determined. The equilibrium internuclear distance, dissociation energy, harmonic frequency, vibrational zero energy, and adiabatic excitation energy are calculated using a symmetry-adapted-cluster configuration-interactlon method in complete active space in Gaussian03 program package at such numerous basis sets as 6-311 ＋＋G, 6-311 ＋＋G（2df,2pd）, 6-311 ＋＋G（2df, p）, cc-PVTZ, 6- 311＋＋G（3df,3pd）, CEP-121G, 6-311＋＋G（2df, pd）, 6-311＋＋G（d,p）,6-311G（3df,3pd）, D95（3df,3pd）, 6-311＋＋G（3df,2p）, 6-311＋＋G（2df）, 6-311＋＋G（df, pd） D95V＋＋, and DGDZVP. The complete potential energy curves are obtained at these sets over a wide internuclear distance range and have least squares fitted to Murrell-Sorbie function. The conclnsion shows that the basis set 6-311＋＋G（2df, p） is a most suitable one for the G^1Ⅱg state. At this basis set, the calculated spectroscopic constants Te, De, Eo, Re, ωe, ωeXe, ae, and Be are of 3.9523 eV, 0.813 06 eV, 113.56 cm^-1, 0.320 15 nm, 227.96 cm^-1, 1.6928 cm^-1, 0.004 436 cm^-1, and 0.4689 cm^-1, respectively, which are in good agreement with measurements whenever available. The total 50 vibrational levels and corresponding inertial rotation constants are for the first time calculated and compared with available RKR data. And good agreement with measurements is obtained.

Geometrical structures, vibrational frequencies, force constants and dissociation energies of isotopic water molecules (H_2O, HDO, D_2O, HTO, DTO, and T_2O) under dipole electric field

The dissociation limits of isotopic water molecules are derived for the ground state. The equilibrium geometries, the vibrational frequencies, the force constants and the dissociation energies for the ground states of all isotopic water molecules under the dipole electric fields from -0.05 a.u. to 0.05 a.u. are calculated using B3P86/6-311＋＋G（3df,3pf）. The results show that when the dipole electric fields change from -0.05 a.u. to 0.05 a.u., the bond length of H-O increases whereas the bond angle of H-O H decreases because of the charge transfer induced by the applied dipole electric field. The vibrational frequencies and the force constants of isotopic water molecules change under the influence of the strong external torque. The dissociation energies increase when the dipole electric fields change from -0.05 a.u. to 0.05 a.u. and the increased dissociation energies are in the order of H2O, HDO, HTO, D2O, DTO, and T2O under the same external electric fields.