Random step maneuver algorithm with normally distributed starting times

The random step maneuver with uniformly distributed starting times has the disadvantage that it cannot focus the starting time on the more efficiency time. It decreases the penetration probability. To resolve this problem, a random step penetration algorithm with normal distribution starting time is proposed. Using the shaping filters and adjoint system method, the miss distance with different starting times can be acquired. According to the penetration standard, the time window ensuring successful penetration can be calculated and it is used as the 3σ bound of the normally distributed random maneuver. Simulation results indicate that the normally distributed random maneuver has higher penetration probability than the uniformly distributed random maneuver.

A Model of the Fatigue Life Distribution of Composite Laminates Based on Their Static Strength Distribution

The reasons of the static strength dispersion and the fatigue life dispersion of composite laminates are analyzed in this article. It is concluded that the inner original defects, which derived from the manufacturing process of composite laminates, are the common and major reason of causing the random distributions of the static strength and the fatigue life. And there is a correlative relation between the two distributions. With the study of statistical relationship between the fatigue loading and the fatigue life in the uniform confidence level and the same survival rate S-N curves of material, the relationship between the static strength distribution and the fatigue life distribution through a material S-N curve model has been obtained. And then the model which is used to describe the distributions of fatigue life of composites, based on their distributions of static strength, is set up. This model reasonably reflects the effects of the inner original defects on the static strength dispersion and on the fatigue life dispersion of composite laminates. The experimental data of three kinds of composite laminates are employed to verify this model, and the results show that this model can predict the random distributions of fatigue life for composites under any fatigue loads fairly well.

BLOCK SPECTRUM CHARACTERISTICS AND FATIGUE CRACK RANDOM GROWTH

Two parameters,block spectrum intensity Seq and spectrum shape factor a,which describe the characteristics of the loading block spectrum are defined,and the relationship between the parameters and fatigue crack propagation behaviours is investigated.It is shown that the spectrum intensity is an 'average drive force' of fatigue crack propagation,and the variance of fatigue crack size at a given fatigue life is closely related to the spectrum shape factor α.

Relationship between Abundance and Area of Pinus tabulaeformis and Quercus liaotungensis Koidz in Lingkong Mountain Nature Reserve

The spatial distribution and species abundance of Pinus tabulaeformis and Quercus liaotungensis Koidz were analyzed with random distribution abundance model and aggregated distribution abundance model,and evaluation goodness was evaluated based on related information of sample area at 4 hm2 in Shanxi Lingkong Mountain with altitude at 1500-1 800 m.The results showed that of the 30 xylophyta plants,abundance of 20 plants was increasing in sequence and the covered spaces extended accordingly,except of 10 plant species.As pixel area extended,curve of abundance-area tended to be volatile if area in abundance sequence was smaller than that of the front one;the curve tended to be stable if the fluctuating point was removed.For the same species,the higher pixel area is,the larger the covered area of the species in corresponding pixel would be.The results of evaluation goodness indicated that aggregated distribution model is better for prediction on relationship between abundance and area,compared with random distribution abundance model.Both of the two models rely on value of m,namely,number of covered pixel given the pixel is fixed.For the species distribute dispersedly,the prediction results would be more accurate if both of the two models are made use of,or the prediction errors would be larger.Given that the total area of sample plot is fixed,the smaller the pixel area is,the more accurate the prediction would be.

Random-injection-based two-channel chaos with enhanced bandwidth and suppressed time-delay signature by mutually coupled lasers: Proposal and numerical analysis

Simultaneous bandwidth(BW) enhancement and time-delay signature(TDS) suppression of chaotic lasing over a wide range of parameters by mutually coupled semiconductor lasers(MCSLs) with random optical injection are proposed and numerically investigated. The influences of system parameters on TDS suppression(characterized by autocorrelation function(ACF) and permutation entropy(PE) around characteristic time) and chaos BW are investigated. The results show that, with the increasing bias current, the ranges of parameters(detuning and injection strength) for the larger BW(> 20 GHz) are broadened considerably, while the parameter range for optimized TDS(< 0.1) is not shrunk obviously.Under optimized parameters, the system can simultaneously achieve two chaos outputs with enhanced BW(> 20 GHz)and perfect TDS suppression. In addition, the system can generate two-channel high-speed truly physical random number sequences at 200 Gbits/s for each channel.

Modeling of radiative properties of metallic microscale rough surface

The radiative properties of a gold surface with one-dimensional Gaussian random roughness distribution were obtained with the finite-difference time-domain （FDTD） method and the recursive convolution treatment of the Drude Model. The bi-directional reflection distribution function （BRDF） for both TM mode and TE mode were obtained and compared with the highly accurate experimental data from the earlier work. The incident wavelength varies from 1.152 μm to 3.392 μm and incident angle is at 300-70°, respectively. The results show that, the predicted values and experimental results are in good agreement. The highly specular peak in the BRDF is reproduced in the numerical simulations, and the increase of the TM mode BRDF is found to be attributed to the effect of a variation in the optical constant at the incident wavelength period.

Modeling random telegraph signal noise in CMOS image sensor under low light based on binomial distribution

The random telegraph signal noise in the pixel source follower MOSFET is the principle component of the noise in the CMOS image sensor under low light. In this paper, the physical and statistical model of the random telegraph signal noise in the pixel source follower based on the binomial distribution is set up. The number of electrons captured or released by the oxide traps in the unit time is described as the random variables which obey the binomial distribution. As a result,the output states and the corresponding probabilities of the first and the second samples of the correlated double sampling circuit are acquired. The standard deviation of the output states after the correlated double sampling circuit can be obtained accordingly. In the simulation section, one hundred thousand samples of the source follower MOSFET have been simulated,and the simulation results show that the proposed model has the similar statistical characteristics with the existing models under the effect of the channel length and the density of the oxide trap. Moreover, the noise histogram of the proposed model has been evaluated at different environmental temperatures.

Modeling flame propagation speed and quenching distance of aluminum dust flame with spatially random distribution of particles

In this research combustion of aluminum dust particles in a quiescent medium with spatially discrete sources distributed in a random way was studied by a numerical approach.A new thermal model was generated to estimate flame propagation speed in a lean/rich reaction medium.Flame speed for different particle diameters and the effects of various oxidizers such as carbon dioxide and oxygen on flame speed were studied.Nitrogen was considered the inert gas.In addition,the quenching distance and the minimum ignition energy(MIE) were studied as a function of dust concentration.Different burning time models for aluminum were employed and their results were compared with each other.The model was based on conduction heat transfer mechanism using the heat point source method.The combustion of single-particle was first studied and the solution was presented.Then the dust combustion was investigated using the superposition principle to include the effects of surrounding particles.It is found that larger particles have higher values of quenching distance in comparison with smaller particles in an assumed dust concentration.With the increase of dust concentration the value of MIE would be decreased for an assumed particle diameter.Considering random discrete heat sources method,the obtained results of random distribution of fuel particles in space provide closer and realistic predictions of the combustion physics of aluminum dust flame as compared with the experimental findings.

Quadric SFDI for Laplacian Discretisation in Lagrangian Meshless Methods

In the Lagrangian meshless(particle)methods,such as the smoothed particle hydrodynamics(SPH),moving particle semi-implicit(MPS)method and meshless local Petrov-Galerkin method based on Rankine source solution(MLPG_R),the Laplacian discretisation is often required in order to solve the governing equations and/or estimate physical quantities(such as the viscous stresses).In some meshless applications,the Laplacians are also needed as stabilisation operators to enhance the pressure calculation.The particles in the Lagrangian methods move following the material velocity,yielding a disordered(random)particle distribution even though they may be distributed uniformly in the initial state.Different schemes have been developed for a direct estimation of second derivatives using finite difference,kernel integrations and weighted/moving least square method.Some of the schemes suffer from a poor convergent rate.Some have a better convergent rate but require inversions of high order matrices,yielding high computational costs.This paper presents a quadric semi-analytical finite-difference interpolation(QSFDI)scheme,which can achieve the same degree of the convergent rate as the best schemes available to date but requires the inversion of significant lower-order matrices,i.e.3×3 for 3D cases,compared with 6×6 or 10×10 in the schemes with the best convergent rate.Systematic patch tests have been carried out for either estimating the Laplacian of given functions or solving Poisson’s equations.The convergence,accuracy and robustness of the present schemes are compared with the existing schemes.It will show that the present scheme requires considerably less computational time to achieve the same accuracy as the best schemes available in literatures,particularly for estimating the Laplacian of given functions.

Generalized Electromagnetic Pollution Monitoring Using WSN

Wireless Sensor Networks (WSN) have recently become one of the major research areas in the wireless communication field and are implemented in a variety of applications. One of these applications that will be tackled in this paper is monitoring electromagnetic (EM) pollution that is mostly caused by a variety of wireless devices that we use in our daily life. This paper presents a generic algorithm that uses a WSN to monitor EM hazardous emissions and reports variation caused by four violators. Additionally it calculates the network’s lifetime and simultaneously studies the effect of random parameters and their distributions on the network. Finally the different combinations of the random parameters and the altered distributions are compared together to achieve the combination that can prolong the network’s lifetime.

Hundred-watt level high-order mode all-fiberized random distributed feedback Raman fiber laser with high mode purity

An all-fiberized random distributed feedback Raman fiber laser(RRFL)with LP_(11) mode output at 1134 nm has been demonstrated experimentally,where an intracavity acoustically induced fiber grating is employed for modal switching.The maximum output power of LP_(11) mode is 93.8 W with the modal purity of 82%,calculated by numerical mode decomposition technology based on stochastic parallel-gradient descent algorithm.To our best knowledge,this is the highest output power with high purity of LP_(11) mode generated from the RRFL.This work may pave a path towards advanced fiber lasers with special temporal and spatial characteristics for applications.

Using a behavior random permutation model to identify displacement grooming in ungulates

Behavior affects an individual's life in all aspects,e.g.,enhancing fitness,leveraging predation risk,and reducing competition with conspecifics.However,the sequential distribution of behaviors received less attention and is unclear what the function of displacement behavior is.Displacement activities can be found in vertebrate species but there is no formal method to determine whether a behavior is expressed as a displaced or normal activity.Analyzing the sequential distributions of behaviors in a natural setting may allow researchers to identify unexpected distributions as a possible signature of displacement activities.In this study,we used a behavior random permutation model to detect the presence of a displacement activity in the Tibetan antelope Pantholops hodgsonii and the Tibetan gazelle Procapra picticaudata.The results showed that grooming in both ungulates tended to be accompanied with vigilance,and the frequency of grooming after vigilance was significantly higher than before vigilance.A significant positive correlation between the scan rate and grooming rate in the 2 ungulates was obtained.We suggest that grooming could sometimes be expressed as a displacement activity in ungulates.In addition to providing a general method for further research on displacement activities in a variety of animal species,this study sheds light on the importance of a spectral analysis of sequential distribution of animal behaviors.Behavior random permutation models can be used to explore the relevance between any 2 behaviors in a specific sequence,especially to identify a myriad of unexpected behaviors relative to their normal context of occurrence.

Brightness enhancement on random-distributed-feedback Raman fiber lasers pumped by multimode diodes

The power scaling on short wavelength(SW)fiber lasers operating around 1μm are in significant demand for applications in energy,environment and industry.The challenge for performance scalability of high-power SW lasers based on rare-earth-doped fiber primarily lies in the physical limitations,including reabsorption,amplified spontaneous emission and parasitic laser oscillation.Here,we demonstrate an all-fiberized,purely passive SW(1018 nm)randomdistributed-feedback Raman fiber laser(RRFL)to validate the capability of achieving high-power output at SWs based on multimode laser diodes(LDs)direct pumping.Directly pumped by multimode LDs,the high-brightness RRFL delivers over 656 W,with an electro-optical efficiency of 20%relative to the power.The slope efficiency is 94%.The beam quality M2factor is 2.9(which is~20 times that of the pump)at the maximum output signal power,achieving the highest brightness enhancement of 14.9 in RRFLs.To the best of our knowledge,this achievement also represents the highest power record of RRFLs utilizing multimode diodes for direct pumping.This work may not only provide a new insight into the realization of high-power,high-brightness RRFLs but also is a promising contender in the power scaling of SWs below 1μm.

Clinical efficacy observation of thalamic pain treated with acupuncture under the guidance of evidence-based medicine

Objective To study the feasibility of the crossover trial design and the minimal imbalance index random distribution method in the clinical small-sample-size randomized controlled trial（RCT） research of thalamic pain treated with acupuncture under the guidance of evidence-based medicine（EBM）.Methods The crossover trial design was adopted.Eleven cases with the definite diagnosis were randomized into a program-I group（6 cases,treated with acupuncture before western medicine） and a program-II group（5 cases,treated with western medicine before acupuncture） according to the minimal imbalance index method.In the statistical analysis,the groups were named as an acupuncture group and a western medicine group separately,11 cases in each one.Acupuncture was applied to Xìmén（郄门 PC 4）,Yīnxì（阴郄 HT 6）,Xuèhǎi（血海 SP 10）,etc.In the control treatment,Carbamazepine was prescribed for oral administration.Either the duration of treatment or the wash-out period was 10 days.The visual analogue scale（VAS） was adopted for the efficacy assessment.Results The total effective was 100.0%（11/11） after treatment in either group.The remarkably effective rates were 63.6%（7/11） and 36.4%（4/11） in the acupuncture group and the western medicine group separately,without statistically significant difference in comparison.Conclusion The crossover trial design and the minimal imbalance index distribution method can accomplish RCT of the clinical acupuncture and moxibustion research with the small sample size involved.They can provide the high-quality evidences for clinical acupuncture research.Acupuncture therapy can achieve the same therapeutic effect as Carbamazepine,the common western medicine,and the efficacy of it is potentially superior to that of western medicine.

Cuckoo search with varied scaling factor

Cuckoo search （CS）, inspired by the obligate brood parasitic behavior of some cuckoo species, iteratively uses L6vy flights random walk （LFRW） and biased/selective random walk （BSRW） to search for new solutions. In this study, we seek a simple strategy to set the scaling factor in LFRW, which can vary the scaling factor to achieve better performance. However, choosing the best scaling factor for each problem is intractable. Thus, we propose a varied scal- ing factor （VSF） strategy that samples a value from the range [0,1] uniformly at random for each iteration. In addition, we integrate the VSF strategy into several advanced CS vari- ants. Extensive experiments are conducted on three groups of benchmark functions including 18 common test functions, 25 functions proposed in CEC 2005, and 28 functions intro- duced in CEC 2013. Experimental results demonstrate the ef- fectiveness of the VSF strategy.

Complete Moment and Integral Convergence for Sums of Negatively Associated Random Variables

For a sequence of identically distributed negatively associated random variables {Xn; n ≥ 1} with partial sums Sn = ∑i=1^n Xi, n ≥ 1, refinements are presented of the classical Baum-Katz and Lai complete convergence theorems. More specifically, necessary and sufficient moment conditions are provided for complete moment convergence of the form ∑n≥n0 n^r-2-1/pq anE（max1≤k≤n｜Sk｜^1/q-∈bn^1/qp）^＋〈∞to hold where r 〉 1, q 〉 0 and either n0 = 1,0 〈 p 〈 2, an = 1,bn = n or n0 = 3,p = 2, an = 1 （log n） ^1/2q, bn=n log n. These results extend results of Chow and of Li and Spataru from the indepen- dent and identically distributed case to the identically distributed negatively associated setting. The complete moment convergence is also shown to be equivalent to a form of complete integral convergence.

Ubiquitiformal Crack Extension in Quasi-Brittle Materials

Based on the concept of ubiquitiform,a ubiquitiformal crack extension model is developed for quasi-brittle materials.Numerical simulations are carried out using the ABAQUS software with the XFEM-based cohesive segments method to determine the ubiquitiformal crack extension path or fracture surface profile of the material under quasi-static loading.Such a ubiquitiformal crack model removes the singularity of a fractal crack;for the latter,the boundary value problem cannot be uniquely defined.In the simulation,the material properties,e.g.,the tensile strength,are assumed to obey the Weibull distribution.The meso-element equivalent method is used to determine the correlation between the Weibull distribution parameters and the aggregate gradation of concrete materials.The numerical results show that the complexities of the ubiquitiformal crack configurations are in good agreement with the previous experimental data.Through the numerical simulation,it is further demonstrated that the complexity of a ubiquitiformal crack is insensitive to the random spatial distribution of the aggregates,but more dependent on the Weibull distribution parameters which reflect the heterogeneity of the concrete.

Study on the distribution law of random code structure of irregular LDPC codes and its application in eliminating short cycles

The distribution law of the random code structure of randomly constructed irregular low-density parity-check （LDPC） codes is studied, Based on the Progressive Edge-Growth （PEG） algorithm, a new algorithm which can both ellminate short cycles and keep the distribution of the random code structure is presented, The experimentsl results show that the performance of the irregular LDPC codes constructed by the new algorithm is superior to that of the PEG algorithm,

Exponential Inequality for a Class of NOD Random Variables and Its Application

In this paper,an exponential inequality for weighted sums of identically distributed NOD （negatively orthant dependent） random variables is established,by which we obtain the almost sure convergence rate of which reaches the available one for independent random variables in terms of Berstein type inequality. As application,we obtain the relevant exponential inequality for Priestley-Chao estimator of nonparametric regression estimate under NOD samples,from which the strong consistency rate is also obtained.

Adjoining Batch Markov Arrival Processes of a Markov Chain

A batch Markov arrival process（BMAP） X^＊=（N, J） is a 2-dimensional Markov process with two components, one is the counting process N and the other one is the phase process J. It is proved that the phase process is a time-homogeneous Markov chain with a finite state-space, or for short, Markov chain. In this paper,a new and inverse problem is proposed firstly： given a Markov chain J, can we deploy a process N such that the 2-dimensional process X^＊=（N, J） is a BMAP？ The process X^＊=（N, J） is said to be an adjoining BMAP for the Markov chain J. For a given Markov chain the adjoining processes exist and they are not unique. Two kinds of adjoining BMAPs have been constructed. One is the BMAPs with fixed constant batches, the other one is the BMAPs with independent and identically distributed（i.i.d） random batches. The method we used in this paper is not the usual matrix-analytic method of studying BMAP, it is a path-analytic method. We constructed directly sample paths of adjoining BMAPs. The expressions of characteristic（D_k, k = 0, 1, 2· · ·）and transition probabilities of the adjoining BMAP are obtained by the density matrix Q of the given Markov chain J. Moreover, we obtained two frontal Theorems. We present these expressions in the first time.