In the context of real-time fault-tolerant scheduling in multiprocessor systems, Primary-backup scheme plays an important role. A backup copy is always preferred to be executed as passive backup copy whenever possible...In the context of real-time fault-tolerant scheduling in multiprocessor systems, Primary-backup scheme plays an important role. A backup copy is always preferred to be executed as passive backup copy whenever possible because it can take the advantages of backup copy de-allocation technique and overloading technique to improve schedulability. In this paper, we propose a novel efficient fault-tolerant ratemonotonic best-fit algorithm efficient fault-tolerant rate-monotonic best-fit （ERMBF） based on multiprocessors systems to enhance the schedulability. Unlike existing scheduling algorithms that start scheduling tasks with only one processor. ERMBF pre-allocates a certain amount of processors before starting scheduling tasks, which enlarge the searching spaces for tasks. Besides, when a new processor is allocated, we reassign the task copies that have already been assigned to the existing processors in order to find a superior tasks assignment configuration. These two strategies are all aiming at making as many backup copies as possible to be executed as passive status. As a result, ERMBF can use fewer processors to schedule a set of tasks without losing real-time and fault-tolerant capabilities of the system. Simulation results reveal that ERMBF significantly improves the schedulability over existing, comparable algorithms in literature.展开更多
By combining fault-tolerance with power management, this paper developed a new method for aperiodic task set for the problem of task scheduling and voltage allocation in embedded real-time systems. The scbedulability ...By combining fault-tolerance with power management, this paper developed a new method for aperiodic task set for the problem of task scheduling and voltage allocation in embedded real-time systems. The scbedulability of the system was analyzed through checkpointing and the energy saving was considered via dynamic voltage and frequency scaling. Simulation results showed that the proposed algorithm had better performance compared with the existing voltage allocation techniques. The proposed technique saves 51.5% energy over FT-Only and 19.9% over FT ＋ EC on average. Therefore, the proposed method was more appropriate for aperiodic tasks in embedded real-time systems.展开更多
With the increasing complexity of industrial application, an embedded control system (ECS) requires processing a number of hard real-time tasks and needs fault-tolerance to assure high reliability. Considering the cha...With the increasing complexity of industrial application, an embedded control system (ECS) requires processing a number of hard real-time tasks and needs fault-tolerance to assure high reliability. Considering the characteristics of real-time tasks in ECS, an integrated algorithm is proposed to schedule real-time tasks and to guarantee that all real-time tasks are completed before their deadlines even in the presence of faults. Based on the nonpreemptive critical-section protocol (NCSP), this paper analyzes the blocking time introduced by resource conflicts of relevancy tasks in fault-tolerant multiprocessor systems. An extended schedulability condition is presented to check the assignment feasibility of a given task to a processor. A primary/backup approach and on-line replacement of failed processors are used to tolerate processor failures. The analysis reveals that the integrated algorithm bounds the blocking time, requires limited overhead on the number of processors, and still assures good processor utilization. This is also demonstrated by simulation results. Both analysis and simulation show the effectiveness of the proposed algorithm in ECS.展开更多
Considering the disadvantage of first-fit strategy in fault-tolerant rate-monotonic first-fit （FTRMFF） algorithm, we analyze the slack time of processors and the schedulability of periodic tasks in rate-monotonic ...Considering the disadvantage of first-fit strategy in fault-tolerant rate-monotonic first-fit （FTRMFF） algorithm, we analyze the slack time of processors and the schedulability of periodic tasks in rate-monotonic （RM） algorithm. Then, the RM-based idleness factor and compact factor are presented to quantify the compact degree of tasks assigned to the same processor. In this paper, the novel fault-tolerant rate-monotonic compact-factor-driven （FTRMCFD） algorithm, which follows the principle of compact factor maximal when allocating the processors for tasks, is proposed. FTRMCFD algorithm makes every processor contain more tasks and get higher utilization to increase the schedulability performance of distributed systems. The simulation experiments reveal that FTRMCFD can reduce the number of required processors by up to 11.5% （with an average of 5.3%）.展开更多
基金Supported by the National Basic Reseach Program of China (973 Program 2004 CB318200)
文摘In the context of real-time fault-tolerant scheduling in multiprocessor systems, Primary-backup scheme plays an important role. A backup copy is always preferred to be executed as passive backup copy whenever possible because it can take the advantages of backup copy de-allocation technique and overloading technique to improve schedulability. In this paper, we propose a novel efficient fault-tolerant ratemonotonic best-fit algorithm efficient fault-tolerant rate-monotonic best-fit （ERMBF） based on multiprocessors systems to enhance the schedulability. Unlike existing scheduling algorithms that start scheduling tasks with only one processor. ERMBF pre-allocates a certain amount of processors before starting scheduling tasks, which enlarge the searching spaces for tasks. Besides, when a new processor is allocated, we reassign the task copies that have already been assigned to the existing processors in order to find a superior tasks assignment configuration. These two strategies are all aiming at making as many backup copies as possible to be executed as passive status. As a result, ERMBF can use fewer processors to schedule a set of tasks without losing real-time and fault-tolerant capabilities of the system. Simulation results reveal that ERMBF significantly improves the schedulability over existing, comparable algorithms in literature.
基金The National Natural Science Foundationof China(No.60873030 )the National High-Tech Research and Development Plan of China(863 Program)(No.2007AA01Z309)
文摘By combining fault-tolerance with power management, this paper developed a new method for aperiodic task set for the problem of task scheduling and voltage allocation in embedded real-time systems. The scbedulability of the system was analyzed through checkpointing and the energy saving was considered via dynamic voltage and frequency scaling. Simulation results showed that the proposed algorithm had better performance compared with the existing voltage allocation techniques. The proposed technique saves 51.5% energy over FT-Only and 19.9% over FT ＋ EC on average. Therefore, the proposed method was more appropriate for aperiodic tasks in embedded real-time systems.
文摘With the increasing complexity of industrial application, an embedded control system (ECS) requires processing a number of hard real-time tasks and needs fault-tolerance to assure high reliability. Considering the characteristics of real-time tasks in ECS, an integrated algorithm is proposed to schedule real-time tasks and to guarantee that all real-time tasks are completed before their deadlines even in the presence of faults. Based on the nonpreemptive critical-section protocol (NCSP), this paper analyzes the blocking time introduced by resource conflicts of relevancy tasks in fault-tolerant multiprocessor systems. An extended schedulability condition is presented to check the assignment feasibility of a given task to a processor. A primary/backup approach and on-line replacement of failed processors are used to tolerate processor failures. The analysis reveals that the integrated algorithm bounds the blocking time, requires limited overhead on the number of processors, and still assures good processor utilization. This is also demonstrated by simulation results. Both analysis and simulation show the effectiveness of the proposed algorithm in ECS.
基金Supported by the National Natural Science Foundation of China (60603032)
文摘Considering the disadvantage of first-fit strategy in fault-tolerant rate-monotonic first-fit （FTRMFF） algorithm, we analyze the slack time of processors and the schedulability of periodic tasks in rate-monotonic （RM） algorithm. Then, the RM-based idleness factor and compact factor are presented to quantify the compact degree of tasks assigned to the same processor. In this paper, the novel fault-tolerant rate-monotonic compact-factor-driven （FTRMCFD） algorithm, which follows the principle of compact factor maximal when allocating the processors for tasks, is proposed. FTRMCFD algorithm makes every processor contain more tasks and get higher utilization to increase the schedulability performance of distributed systems. The simulation experiments reveal that FTRMCFD can reduce the number of required processors by up to 11.5% （with an average of 5.3%）.
