Multi-Objective Bacterial Foraging Optimization Algorithm Based on Effective Area in Cognitive Emergency Communication Networks

Cognitive emergency communication net-works can meet the requirements of large capac-ity,high density and low delay in emergency com-munications.This paper analyzes the properties of emergency users in cognitive emergency communi-cation networks,designs a multi-objective optimiza-tion and proposes a novel multi-objective bacterial foraging optimization algorithm based on effective area(MOBFO-EA)to maximize the transmission rate while maximizing the lifecycle of the network.In the algorithm,the effective area is proposed to prevent the algorithm from falling into a local optimum,and the diversity and uniformity of the Pareto-optimal solu-tions distributed in the effective area are used to eval-uate the optimization algorithm.Then,the dynamic preservation is used to enhance the competitiveness of excellent individuals and the uniformity and diversity of the Pareto-optimal solutions in the effective area.Finally,the adaptive step size,adaptive moving direc-tion and inertial weight are used to shorten the search time of bacteria and accelerate the optimization con-vergence.The simulation results show that the pro-posed MOBFO-EA algorithm improves the efficiency of the Pareto-optimal solutions by approximately 55%compared with the MOPSO algorithm and by approx-imately 60%compared with the MOBFO algorithm and has the fastest and smoothest convergence.

Distributed wireless quantum communication networks with partially entangled pairs

Wireless quantum communication networks transfer quantum state by teleportation. Existing research focuses on maximal entangled pairs. In this paper, we analyse the distributed wireless quantum communication networks with partially entangled pairs. A quantum routing scheme with multi-hop teleportation is proposed. With the proposed scheme, is not necessary for the quantum path to be consistent with the classical path. The quantum path and its associated classical path are established in a distributed way. Direct multi-hop teleportation is conducted on the selected path to transfer a quantum state from the source to the destination. Based on the feature of multi-hop teleportation using partially entangled pairs, if the node number of the quantum path is even, the destination node will add another teleportation at itself. We simulated the performance of distributed wireless quantum communication networks with a partially entangled state. The probability of transferring the quantum state successfully is statistically analyzed. Our work shows that multi-hop teleportation on distributed wireless quantum networks with partially entangled pairs is feasible.

Distributed wireless quantum communication networks

The distributed wireless quantum communication network （DWQCN） ha~ a distributed network topology and trans- mits information by quantum states. In this paper, we present the concept of the DWQCN and propose a system scheme to transfer quantum states in the DWQCN. The system scheme for transmitting information between any two nodes in the DWQCN includes a routing protocol and a scheme for transferring quantum states. The routing protocol is on-demand and the routing metric is selected based on the number of entangled particle pairs. After setting up a route, quantum tele- portation and entanglement swapping are used for transferring quantum states. Entanglement swapping is achieved along with the process of routing set up and the acknowledgment packet transmission. The measurement results of each entan- glement swapping are piggybacked with route reply packets or acknowledgment packets. After entanglement swapping, a direct quantum link between source and destination is set up and quantum states are transferred by quantum teleportation. Adopting this scheme, the measurement results of entanglement swapping do not need to be transmitted specially, which decreases the wireless transmission cost and transmission delay.

Degree distribution and robustness of cooperative communication network with scale-free model

With the requirements of users enhanced for wireless communication, the cooperative communication will become a development trend in future. In this paper, a model based on complex networks with both preferential attachment is researched to solve an actual network CCN （Cooperative Communication Network）. Firstly, the evolution of CCN is given by four steps with different probabilities. At the same time, the rate equations of nodes degree are presented to analyze the evolution of CCN. Secondly, the degree distribution is analyzed by calculating the rate equation and numerical simulation. Finally, the robustness of CCN is studied by numerical simulation with random attack and intentional attack to analyze the effects of degree distribution and average path length. The results of this paper are more significant for building CCN to programme the resource of communication.

THE STUDY ON DEGREE DISTRIBUTION PROPERTY OF COMPLEX NETWORK BASED ON COOPERATIVE COMMUNICATION

Complex networks have been widely studied. Recently,many results show that the degree distributions of some large networks follow the form of power-law and these networks possess better robustness against random nodes failure. As an effective technology on combating the channel fading,wireless cooperative communication is becoming one of the most important methods to improve the wireless communication performances. In this paper,the complex network models based on cooperative communication and non-cooperative communication are established; and the degree distribution properties for them are studied. The simulation results show that the degree distributions of these networks also follow the form of power-law,which means that the addition of cooperative communi-cation links will not change the property of degree distribution and then these networks will possess better robustness against random nodes failure as well.

A Review of Quantum Cryptography Communication for Wireless Networks

We analyze the development of quantum cryptography communication,including analyze the problems lie in the existent literatures and give the resolve methods according to these problems.Then discuss the quantum cryptography communication for wireless networks and also point out the shortcoming of current research and the future of quantum wireless networks.

Distributed Real-time Optimal Power Flow Strategy for DC Microgrid Under Stochastic Communication Networks

This paper addresses a distributed real-time optimal power flow(RTOPF) strategy for DC microgrids. In this paper, we focus on the scenarios where local information sharing is conducted in stochastic communication networks subject to random failures. Most existing real-time optimal power flow(OPF) algorithms for the DC microgrid require all controllers to work in concert with a fixed network topology to maintain a zero gap between estimated global constraint violations. Thus, the high reliability of communication is required to ensure their convergence. To address this issue, the proposed RTOPF strategy tolerates stochastic communication failures and can seek the optimum with a constant step size considering the operation limitations of the microgrid. These aspects make the strategy suitable for real-time optimization, particularly when the communication is not reliable. In addition, this strategy does not require information from non-dispatchable devices, thereby reducing the number of sensors and controllers in the system. The convergence of the proposed strategy and the optimal equilibrium points are theoretically proven. Finally, simulations of a 30-bus DC microgrid are performed to validate the effectiveness of the proposed designs.

A project plan for construction and cabling of picture archiving and communication system network

Objective To determine a network solution to meet the network requirements of the heavy data flow, load balance, and potential network storms from expansion of picture archiving and communication system (PACS) application.Methods Intel Netstructure 480T Giga Switch was used as the main switch and connected to each building by fiber channel at 1 Giga speed to archive 100 MB/s to each port. At the same time, the in-dependence of the original network construction was physically kept. The layer 3 and 4 switchers were used as load balance to reduce the heavy load of the network, and all the cabling for PACS used the super CAT5 along with the Intel NetStructure 1520 to prepare for potential network storms.Results An advanced intranet was set up to fully meet the high standard requirement of the PACS. The foundation for upgrading the whole network system to 1 Giga application was built to achieve sharing and transmission of images, information, and patient data within the hospital. The base was established for the standardized management of the hospital.Conclusion Good planning is the first step in setting up PACS, and the equipment forms the necessary platform to run PACS and all kinds of hospital information system (HIS). The networking construction is the foundation of e-hospital.

Communication Networking Schemes for Wide Area Electric Vehicle Energy Service Network

Electric vehicles (EVs) are an emerging type of mobile intelligent power consumption devices in Smart Grid as new green transport tools. In order to provide a powerful automation and intelligence support for wide area electric vehicles energy service network, we analyze the network infrastructure and communications demands of various terminals, devices and monitoring systems distributed in wide area electric vehicle energy service network. According to interactive user services scenarios and energy operations intelligent monitoring, we propose multimode communication integration architecture for wide area electric vehicle energy service network by means of the fusion of the Internet of Things (IoT) technology. Then, we design different networking schemes in access networks and backbone transmission networks meeting multi-scene and multi-operation interaction requirements. The networking schemes will provide efficient technical support to implement intelligent, cross-regional, interactive energy services for electric vehicle users.

Mathematical simulations of the galvanic coupling intra-body communication by using the transfer function method

The galvanic coupling intra-body communication （IBC） was mathematically simulated based on the proposed transfer function. Firstly, a galvanic coupling IBC circuit model was developed and the corresponding parameters were discussed. Secondly, the transfer function of the galvanic coupling IBC was derived and proposed. Finally, the signal attenuation characteristics of the galvanic coupling IBC were measured along different signal transmission paths of actual human bodies, while the corresponding mathematical simulations based on the proposed transfer function were carried out. Our investigation showed that the mathematical simulation results coincided with the measured results over the frequency range of 100kHz to 5MHz, which indicated that the proposed transfer function could be useful for theoretical analysis and application of the galvanic coupling IBC.

Coordination of multiple mobile robots with limited communication range in pursuit of single mobile target in cluttered environment

This paper addresses the problem of coordinating multiple mobile robots in searching for and capturing a mobile target,with the aim of reducing the capture time.Compared with the previous algorithms,we assume that the target can be detected by any robot and captured successfully by two or more robots.In this paper,we assume that each robot has a limited communication range.We maintain the robots within a mobile network to guarantee the successful capture.In addition,the motion of the target is modeled and incorporated into directing the motion of the robots to reduce the capture time.A coordination algorithm considering both aspects is proposed.This algorithm can greatly reduce the expected time of capturing the mobile target.Finally,we validate the algorithm by the simulations and experiments.

A Review of Implant Intra-Body Communication

With an extending life expectancy and demand for medical healthcare,there are wide-spread and stringent requirements of implantable medical devices(IMDs)development for dia-gnostics,treatments,and therapies by emerging technologies.One of the primary targets for the IMDs is evolving a reliable,speed,and accurate communication method to provide proactive well-ness management and thereby achieve early detection,disease prevention,and even treatments.In-tra-body communication(IBC)is a potential technology envisioning a sensors/actuators network within a human body,which uses the conductive properties of a body and is categorized in the standardized IEEE 802.15.06 protocol.In the present review,the current state-of-art of implant in-tra-body communication has been surveyed.Based on the propagation mechanisms over investig-ated IBC spectrum(i.e.,0.1 MHz-100 MHz),the capacitive and galvanic coupling IBC is con-sidered,where the subfields regarding modeling method(including circuit,numerical,analytical,and filter model),measurement details(including the effect of the electrode,cable,impedance,and instrument),clinical application(including cardiac pacemaker and wireless endoscope),transceiver design(including discrete component and CMOS technology)and media access control(MAC)lay-er design have been introduced or discussed.Furthermore,the open challenges and issues have been explored as an anticipated inspiration for future development.

Communication-Censored Distributed Learning for Stochastic Configuration Networks

This paper aims to reduce the communication cost of the distributed learning algorithm for stochastic configuration networks (SCNs), in which information exchange between the learning agents is conducted only at a trigger time. For this purpose, we propose the communication-censored distributed learning algorithm for SCN, namely ADMMM-SCN-ET, by introducing the event-triggered communication mechanism to the alternating direction method of multipliers (ADMM). To avoid unnecessary information transmissions, each learning agent is equipped with a trigger function. Only if the event-trigger error exceeds a specified threshold and meets the trigger condition, the agent will transmit the variable information to its neighbors and update its state in time. The simulation results show that the proposed algorithm can effectively reduce the communication cost for training decentralized SCNs and save communication resources.

Comparison of Using an Electronic System and Conventional Monitoring Method for Monitoring the Quality of Drinking Water and Defects Discovery in Rural Area Water Distribution Network of Abarkouh, Iran

The used water for human consumption must be free of microorganisms and chemicals that cause risk in the human health. In this study, water quality of 18 rural area of Abarkouh was determined and compared the conventional monitoring method (According to ISIR (Institute of Standards and Industrial Research of Iran), 1053 and 4208) and use of electronic system method (Patent in industrial property general office of Iran, 77815). Free chlorine monitoring and pH test done by health workers in the conventional method and the results will be sent to the Health Network monthly. Sampling for microbiological testing is done monthly based on population (According to ISIR, 4208). On the electronic system, the procedure is also done by health workers, but the result will be sent to the receiver device by using a cell phone. According to the chlorine test results if the free chlorine residual reported zero, microbiological sampling was done by a health expert. Finally, the number of chlorine test and microbiological sampling and the results of these experiments collected in the both methods and recorded in SPSS 22 then were analyzed by using chi-square test and Fisher exact test. The result of microbiological experiments shows that the sampling rate decreased 29% in using of electronic system method in comparison to the conventional monitoring method while the number of microbial defect detection increased 19% in drinking water networks monitoring by electronic system. Using of electronic system monitoring can reduce the rate and cost of microbiological sampling and its experiments and increase accuracy of these tests, in this way it will increase the quality and safety of drinking water in distribution network in small and dispersed rural communities.

Positioning with Wide-Area GNSS Networks: Concept and Application

The use of Global Navigation Satellite Systems (GNSS) for positioning has revolutionized the way location data is be- ing collected. The NAVigation System with Time And Ranging Global Positioning System (GPS), which is a principal component of the global navigation satellite system (GNSS);is a satellite-based radio navigation system that provides positions of points of interest and time information to users. GPS positional accuracy can be improved by using differential corrections obtained through a technique called Differential GPS (DGPS), which is known to provide the most accurate positioning results. Differential correction can be applied in real time at the data collection phase or in the of- fice, at the post-processing phase. DGPS is generally used for positioning purposes through static or kinematics GPS surveys. In static GPS surveys, one receiver is placed at a point whose coordinates are known and the other receiver is placed over a point whose coordinates are desired. In kinematic surveys, one receiver remains at one point (base station) normally with known coordinates, and the other receiver (rover) moves from point to point in the project area. Kinematic surveys in which points positions are computed on-the-fly (OTF) are known as real-time kinematic (RTK). RTK surveys provide real-time locations of points of interest needed in many applications. Positioning with wide-area GNSS networks is basically based on the DGPS and RTK concepts. Observables from a network of a finite number of GPS receivers over an area are processed by a server at a central location (network server) and made available to the users of the network later or in real-time through radio-based, satellite, or wireless communications. This article provides a review of the concept and application of positioning with wide-area GNSS networks.

Design and Analysis of Com munication Network for Distributed SCADA System

This paper presents the design of hierarchical communication network for traction power supply supervisory control and data acquisition (SCADA) system. Some key points, such as data transmission synchronization, database distribution, data transformation, and the network communication optimization at the supervisory level of the communication network are discussed. At the control level, based on the specificity of communication lines for electrified railway, a structure of two layer ring telecommunication network and the efficient bi directional polling scheme in software design are utilized. Then, an analysis for the scheme under normal and disturbance conditions is given. By means of the scheme, software switching over at a fault point of a channel is realized automatically.

Achieving Efficient Channel Utilization for Data Communications in IEEE 802.11 WLAN

In the IEEE 802. 11 protocol, the adoption of the exponential backoff technique leads to throughput performance strongly dependent on the initial contention window size and, most importantly, on the number of contending stations considered in the network. This paper proposes a simpie but accurate method to dynamically estimate the number of contending stations in a wireless local area network (WLAN). Based on estimation, all the mobile stations dynamically adjust the initial contention window in medium access control (MAC) layer to avoid collisions. The simulation results show that the proposed algorithm can achieve efficient channel utilization, higher system throughput, and better fairness performance.

Developing Environment of Hierarchical and Distributed Real-Time Fire-Control Network

This paper introduces a hierarchical real-time environment for developing ship-bornefire-control system. Advanced computer networks are used to simulate the system with the requiredengagement scenario, including own-ship and parameters, and data processing and transmission,mission calculation, graphical supervision and gunnery ballistics outputting. The simulation systemis able to receive instruction from, or send information to the command-control center. Furthermore,the system can also be used to compare various designed schemes and analyze the accuracy andeffectiveness of the system.

Steady-State Analysis of the Distributed Queueing Algorithm in a Single-Channel M2M Network

The Distributed Queuing (DQ) algorithm is predicted as one of the solutions to the issues currently found in IoT networks over the use of Aloha based algorithms. Since recently, the algorithm has been of interest to many IoT researchers as a replacement of those Aloha variants for channel access. However, previous works analyzed and evaluated the DQ algorithm without any consideration of the stability of its queues, assuming it is stable for any given number of nodes in the network. In this paper, we define the DQ stability condition in a single-channel M2M environment considering a traffic model of periodic and urgent frames from each node in the network. Besides, a steady-state evaluation of the algorithm’s performance metrics is also presented. In general, the DQ algorithm, when it is stable, was observed not to efficiently use the contention slots for the collision resolution. In a single-channel environment, the DQ algorithm is found to outperform the Aloha based algorithms only in an idle-to-saturation scenario.

Unweighted Voting Method to Detect Sinkhole Attack in RPL-Based Internet of Things Networks

The Internet of Things(IoT)consists of interconnected smart devices communicating and collecting data.The Routing Protocol for Low-Power and Lossy Networks(RPL)is the standard protocol for Internet Protocol Version 6(IPv6)in the IoT.However,RPL is vulnerable to various attacks,including the sinkhole attack,which disrupts the network by manipulating routing information.This paper proposes the Unweighted Voting Method(UVM)for sinkhole node identification,utilizing three key behavioral indicators:DODAG Information Object(DIO)Transaction Frequency,Rank Harmony,and Power Consumption.These indicators have been carefully selected based on their contribution to sinkhole attack detection and other relevant features used in previous research.The UVM method employs an unweighted voting mechanism,where each voter or rule holds equal weight in detecting the presence of a sinkhole attack based on the proposed indicators.The effectiveness of the UVM method is evaluated using the COOJA simulator and compared with existing approaches.Notably,the proposed approach fulfills power consumption requirements for constrained nodes without increasing consumption due to the deployment design.In terms of detection accuracy,simulation results demonstrate a high detection rate ranging from 90%to 100%,with a low false-positive rate of 0%to 0.2%.Consequently,the proposed approach surpasses Ensemble Learning Intrusion Detection Systems by leveraging three indicators and three supporting rules.