Soil disturbance includes the change of stress state and the damage of soil structure.The field testing indices reflect the combined effect of both changes and it is difficult to identify the soil structure disturbanc...Soil disturbance includes the change of stress state and the damage of soil structure.The field testing indices reflect the combined effect of both changes and it is difficult to identify the soil structure disturbance directly from these indices.In the present study,the small-strain shear modulus is used to characterize soil structure disturbance by normalizing the effective stress and void ratio based on Hardin equation.The procedure for evaluating soil sampling disturbance in the field and the further disturbance during the subsequent consolidation process in laboratory test is proposed,and then validated by a case study of soft clay ground.Downhole seismic testing in the field,portable piezoelectric bender elements for the drilled sample and bender elements in triaxial apparatus for the consolidated sample were used to monitor the shear wave velocity of the soil from intact to disturbed and even remolded states.It is found that soil sampling disturbance degree by conventional thin-wall sampler is about 30%according to the proposed procedure,which is slightly higher than that from the modified volume compression method proposed by Hong and Onitsuka(1998).And the additional soil disturbance induced by consolidation in laboratory could reach about 50%when the consolidation pressure is far beyond the structural yield stress,and it follows the plastic volumetric strain quite well.展开更多
In this study, the impact of soil-cement stabilization on the index properties of the subgrade of roads was investigated. Efforts were on the means of improving the bearing capacity of the subgrade of a flexible pavem...In this study, the impact of soil-cement stabilization on the index properties of the subgrade of roads was investigated. Efforts were on the means of improving the bearing capacity of the subgrade of a flexible pavement structure. Three selected roads (Ogbia-Nembe, section of the East-West Road and section of Port Harcourt-Aba Road) in the Niger Delta Region of Nigeria were examined to determine the effect of sand-cement stabilization on the compaction index property of their undisturbed subgrade and the optimal ratio of soil-cement on the expansive soils at which the California Bearing Ratio (CBR) is optimized. Disturbed soil samples were collected from twenty trial pits on each of the three study roads using a hand ulger and tested for their respective compaction index properties. It was discovered that their California Bearing Ratio (CBR) was very low. Some of the collected specimen materials were stabilized with varying percentages of soil-cement contents ranging from 6% - 14% in order to ascertain its effects on the compaction index properties of the sample soils. Results of the various stabilization test procedures show that: Stabilization of the soil using Soil-Cement Stabilization affected the Compaction Index properties of the soil and further improved the California Bearing Ratio (CBR). On the Ogbia-Nembe Road;Soil-Cement stabilization improved the CBR and is optimized at a 10% sand-cement ratio with optimum moisture content ranging from 6.2% - 14%, maximum dry density ranges from 1700 - 1780 kg/m<sup>3</sup>, yielding an average CBR of 42.7% for soaked samples. On the section of East-West Road from Eleme Junction to Etteh Junction;Soil-Cement stabilization improved the CBR and is optimized at a 14% sand-cement ratio with optimum moisture content ranging from 6.2% - 14.2%, maximum dry density ranges from 1660 - 1800 kg/m<sup>3</sup>, yielding an average CBR of 43.9% for soaked samples. On the section of Port Harcourt-Aba Express Road from Eleme Junction to Osisioma Junction;Soil-Cement stabilization improved the CBR and is optimized at a 12% sand-cement ratio having an optimum moisture content ranging from 5.4% - 17.3%, maximum dry density ranges from 1610 - 1740 kg/m<sup>3</sup>, and an average California Bearing Ratio for soaked samples at 40%.展开更多
基金This study is partly supported by the National Natural Science Foundation of China(Grant Nos.51978613,52278374 and 51988101).All these funding grants are greatly acknowledged.
文摘Soil disturbance includes the change of stress state and the damage of soil structure.The field testing indices reflect the combined effect of both changes and it is difficult to identify the soil structure disturbance directly from these indices.In the present study,the small-strain shear modulus is used to characterize soil structure disturbance by normalizing the effective stress and void ratio based on Hardin equation.The procedure for evaluating soil sampling disturbance in the field and the further disturbance during the subsequent consolidation process in laboratory test is proposed,and then validated by a case study of soft clay ground.Downhole seismic testing in the field,portable piezoelectric bender elements for the drilled sample and bender elements in triaxial apparatus for the consolidated sample were used to monitor the shear wave velocity of the soil from intact to disturbed and even remolded states.It is found that soil sampling disturbance degree by conventional thin-wall sampler is about 30%according to the proposed procedure,which is slightly higher than that from the modified volume compression method proposed by Hong and Onitsuka(1998).And the additional soil disturbance induced by consolidation in laboratory could reach about 50%when the consolidation pressure is far beyond the structural yield stress,and it follows the plastic volumetric strain quite well.
文摘In this study, the impact of soil-cement stabilization on the index properties of the subgrade of roads was investigated. Efforts were on the means of improving the bearing capacity of the subgrade of a flexible pavement structure. Three selected roads (Ogbia-Nembe, section of the East-West Road and section of Port Harcourt-Aba Road) in the Niger Delta Region of Nigeria were examined to determine the effect of sand-cement stabilization on the compaction index property of their undisturbed subgrade and the optimal ratio of soil-cement on the expansive soils at which the California Bearing Ratio (CBR) is optimized. Disturbed soil samples were collected from twenty trial pits on each of the three study roads using a hand ulger and tested for their respective compaction index properties. It was discovered that their California Bearing Ratio (CBR) was very low. Some of the collected specimen materials were stabilized with varying percentages of soil-cement contents ranging from 6% - 14% in order to ascertain its effects on the compaction index properties of the sample soils. Results of the various stabilization test procedures show that: Stabilization of the soil using Soil-Cement Stabilization affected the Compaction Index properties of the soil and further improved the California Bearing Ratio (CBR). On the Ogbia-Nembe Road;Soil-Cement stabilization improved the CBR and is optimized at a 10% sand-cement ratio with optimum moisture content ranging from 6.2% - 14%, maximum dry density ranges from 1700 - 1780 kg/m<sup>3</sup>, yielding an average CBR of 42.7% for soaked samples. On the section of East-West Road from Eleme Junction to Etteh Junction;Soil-Cement stabilization improved the CBR and is optimized at a 14% sand-cement ratio with optimum moisture content ranging from 6.2% - 14.2%, maximum dry density ranges from 1660 - 1800 kg/m<sup>3</sup>, yielding an average CBR of 43.9% for soaked samples. On the section of Port Harcourt-Aba Express Road from Eleme Junction to Osisioma Junction;Soil-Cement stabilization improved the CBR and is optimized at a 12% sand-cement ratio having an optimum moisture content ranging from 5.4% - 17.3%, maximum dry density ranges from 1610 - 1740 kg/m<sup>3</sup>, and an average California Bearing Ratio for soaked samples at 40%.