Goals and Key Technology of Fertilizer-pesticide "Double Reduction" and Synergism for Greenhouse Strawberry

In order to develop green good, reduce the use of chemical fertilizer and pesticide, realize ＂double reduction＂ and synergism, improve safety and quality of products, protect the ecological environment and promote the healthy and steady development of strawberry industry, the goals and key technology of fertilizer-pesticide ＂double reduction＂ and synergism for greenhouse strawberry are summed up in this paper targeting at the current situation of strawberry production and combined with the new technology achievements at home and abroad. The key technology includes six items： healthy seedling cultivating technique, soil improvement and continuous cropping obstacle treatment technique, agricultural ecological prevention tech- nique, physicochemical trap of pest control technique, biological control technique and low residual risk chemical control technique.

Stability analysis and control technology of gob‑side entry retaining with double roadways by flling with high‑water material in gently inclined coal seam

To ameliorate the defects of insufcient support resistance of traditional roadside flling bodies for gob-side entry retaining(GER),overcome the inability to adapt to the deformation of surrounding rock,and isolate the goaf efectively,a new type of high-water material as a roadside flling body for GER technology with double roadways was proposed.The instability analysis and control technology of GER with double roadways by flling high-water material into a gently inclined coal seam were studied.The basic mechanical properties of the new high-water material were investigated through laboratory experiments,and their main advantages were identifed.The reasonable width of the roadside flling wall of a high-water material was obtained by combining ground pressure observation and theoretical calculations.The distribution characteristics of the stress and plastic zone of surrounding rock of GER after being stabilized by the disturbance of the working face were studied using numerical simulations,and the failure range of GER by flling with high-water material was revealed.Based on this,a coupling control technology of anchor cables and bolts+single props+metal mesh+anchor bolts is proposed.Through the coupling methods of arranging borehole peeping and observing the convergences of surrounding rock,the results demonstrate that GER with double roadways by flling with a 1.8-m-wide high-water material has a good control efect.The above research will play an active role in promoting the application of high-water materials in GER roadside flling.

Construction Technology and Quality Control of Double Layer Continuous Paving of Cement Stabilized Macadam Base

The construction method of continuous paving of the upper and lower base of the water stable macadam base can improve the construction efficiency,overcome the quality problems of the traditional layered paving of the upper and lower base,such as untimely curing,slow construction,poor interlayer bonding,contraction joint and interlayer,so as to ensure the construction quality of the water stable macadam.It is also the promotion and application of new technology.

Full Mechanized Production Technology for Double-Low Rapeseed in Xianning City

This paper standardizes the operation of rapeseed production including variety choosing,field preparation,mechanical seeding,field management,mechanical harvesting etc.,to realize full mechanization of rapeseed production. The key technologies: the optimum sowing date was from mid-September to mid-October in rapeseed-rice（corn） double cropping system region,and from mid-October to late October in rapeseed-rice-rice triple-cropping region; seeding rate was 4. 5 kg/ha-6. 0 kg/ha; the optimum density was 450000-750000 plants per ha;150-240 kg N fertilizer,60-90 kg P2O5 fertilizer,90-135 kg K2O fertilizer and 7. 5-15 kg B fertilizer were used per ha,50% of N fertilizer and the rest of fertilizer were used as basal fertilizer; segmented harvesting was done when 70%-80% of siliques per plant was yellow and combined harvesting was done when more than 90% of siliques per plant was yellow or brown.

Performance of Double-Pole Four-Throw Double-Gate RF CMOS Switch in 45-nm Technology

In this paper, we have investigated the design parameters of RF CMOS switch, which will be used for the wireless tele-communication systems. A double-pole four-throw double-gate radio-frequency complementary-metal-oxide-semicon- ductor (DP4T DG RF CMOS) switch for operating at the 1 GHz is implemented with 45-nm CMOS process technology. This proposed RF switch is capable to select the data streams from the two antennas for both the transmitting and receiving processes. For the development of this DP4T DG RF CMOS switch we have explored the basic concept of the proposed switch circuit elements required for the radio frequency systems such as drain current, threshold voltage, resonant frequency, return loss, transmission loss, VSWR, resistances, capacitances, and switching speed.

A High Voltage BCD Process Using Thin Epitaxial Technology

A high voltage BCD process using thin epitaxial technology is developed for high voltage applications. Compared to conventional thick expitaxial technology, the thickness of the n-type epitaxial layer is reduced to 9μm,and the diffusion processing time needed for forming junction isolation diffusions is substantially reduced. The isolation diffusions have a smaller lateral extent and occupy less chip area. High voltage double RESURF LD- MOS with a breakdown voltage of up to 900V,as well as low voltage CMOS and BJT,are achieved using this high voltage BCD compatible process. An experimental high voltage half bridge gate drive IC using a coupled level shift structure is also successfully implemented, and the high side floating offset voltage in the half bridge drive IC is 880V. The major features of this process for high voltage applications are also clearly demonstrated.

Do cooperatives participation and technology adoption improve farmers’welfare in China?A joint analysis accounting for selection bias

This study examines the impact of farmers’cooperatives participation and technology adoption on their economic welfare in China.A double selectivity model(DSM)is applied to correct for sample selection bias stemming from both observed and unobserved factors,and a propensity score matching(PSM)method is applied to calculate the agricultural income difference with counter factual analysis using survey data from 396 farmers in 15 provinces in China.The findings indicate that farmers who join farmer cooperatives and adopt agricultural technology can increase agricultural income by 2.77 and 2.35%,respectively,compared with those non-participants and non-adopters.Interestingly,the effect on agricultural income is found to be more significant for the low-income farmers than the high-income ones,with income increasing 5.45 and 4.51%when participating in farmer cooperatives and adopting agricultural technology,respectively.Our findings highlight the positive role of farmer cooperatives and agricultural technology in promoting farmers’economic welfare.Based on the findings,government policy implications are also discussed.

A Study on the Double Semi-Active Vibration Isolation System

This paper puts forward the concept of double semi-active vibration isolation systemutilizing the 'on-off' active damper and the 'on-off' active spring. Applying KBM Asympto-tic method, the vibration of the system in case of weak semi-active control is studied. ln pcactice, there are two types of vibration isolation. One is to isolate the transmitting of the cyclicunbalanced force generated by the revolving machine to the surroundings. The other is to isolatethe transmitting of the vibration displacement of the surroundings to precise equipment. Deduc-ing the influence of the roadway unflatness on vehicles also belongs to this type. For the firsttype of isolation system, the damper always dissipates energy, and the total work done by the spring in a vibration cycle is zero. For the second type of isolation system, the work done by the damper sometimes is positive, and sometimes negative. The damper dissipates less energy. The work done by the spring in a vibration cycle isn't zero, and it is usually positive. ln thispaper, the vibration isolation is refered to the second type. .

Technical Note and Brief Overview of the Materials Science and Technology along with Designing Aspects for Development of Spintronic Devices with Optimum Efficiency

One of the major challenges in designing and fabricating Spintronic devices is the choice of both, Materials and the Technology, along with understanding the intricacies of the Designing aspects. In this communication, we have attempted to briefly discuss these factors, with an aim to draw the attention of the Materials Scientists and Technologists to this serious challenge, in the direction of which, though a lot of research and development work has been done, still needs more concerted efforts to be made in order to make the Spintronic devices that can offer good efficiency for maximizing their usefulness.

REQUIREMENT OF SILICON FLATNESS FOR SILICON DIRECT BONDING TECHNOLOGY

The influence of silicon slice flatness on bonding technology and the relation between a foreign particle and resulting bubble are quantitatively presented by the elastic theory. It is demonstrated experimentally by X-ray double crystal diffractometry and infrared imager.

Double Glow Plasma Surface Alloyed Burn-resistant Titanium Alloy

Conventional titanium alloy may be ignited and burnt under high temperature, high pressure and high gas flow velocity condition. In order to avoid this problem, we have developed a new kind of burn-resistant titanium alloy—double glow plasma surface alloying burn-resistant titanium alloy. Alloying element Cr , Mo, Cu are induced into the TJ-6A1-4V and Ti-6.5Al-0.3Mo-l.5Zr-0.25Si substrates according to double glow discharge phenomenon, Ti-Cr ,Ti-Mo, Ti-Cu binary burn-resistant alloy layers are formed on the surface of Ti-6Al-4V and Ti-6.5Al-0.3Mo-l.5Zr-0.25Si alloys. The depth of the surface burn-resistant alloy layer can reach to above 200 microns and alloying element concentration can reach 90%. Burn-resistant property experiments reveal that if Cr concentration reach to 14%, Cu concentration reach to 12%, Mo concentration reach to 10% in the alloying layers, ignition and burn of titanium alloy can be effectively avoided.

A Study of Multi-Permeating TiN/Ti Alloying Layer Using Plasma Surface Alloying Technology

TiN/Ti multi-permeating alloying layer has been formed on the low carbon steel by means of the double glow-discharge plasma surface alloying technique and hollow-cathode effect. The alloying layer was detected by axiovert 25 CA optical microscope with computer analyzing software （LEC）, GDA-2 glow discharge spectroscopy （GDS）, X-ray diffraction （XRD） and galvanochemical method. The results showed that the thickness of TiN/Ti multi-permeating alloying layer was about 10μm, the content of Ti on the surface was up to 63.48 wt% and the content of N was up to 12.46 wt%. The atom Ti and N concentrations changed gradually across the depth of the alloying layer and the preferred orientation of TiN/Ti alloying layer was crystal surface （200）. The multi-permeating alloying layer and substrate were combined through metallurgy. The surface appearances of the multi-permeating alloying layer were uniform and of a compact cellular structure. The hardness of the surface was about 1600-3000 HV0.1. The corrosion resistance of the permeating TiN/Ti alloying layer in 0.5 mol/L H2SO4 solution was greatly increased and the corrosion rate was only 0.3082 g/m^2. h.

Doubled haploid technology and synthetic apomixis:Recent advances and applications in future crop breeding

Doubled haploid(DH)technology and synthetic apomixis approaches can considerably shorten breeding cycles and enhance breeding efficiency.Compared with traditional breeding methods,DH technology offers the advantage of rapidly generating inbred lines,while synthetic apomixis can effectively fix hybrid vigor.In this review,we focus on(i)recent advances in identifying and characterizing genes responsible for haploid induction(Hl),(ii)the molecular mechanisms of Hl,(ili)spontaneous haploid genome doubling,and(iv)crop synthetic apomixis.We also discuss the challenges and potential solutions for future crop breeding programs utilizing DH technology and synthetic apomixis.Finally,we provide our perspectives about how to integrate DH and synthetic apomixis for precision breeding and de novo domestication.

The Role of Mathematics in STEAM Education under the“Double Reduction”Policy

This essay delves into the pivotal role of mathematics within the context of STEAM(science,technology,engineering,arts,and mathematics)education under China’s“Double Reduction”policy.Amidst a shifting global education landscape that emphasizes holistic growth,policies such as the“Double Reduction”strategy underscore the significance of well-rounded development alongside academic excellence.By advocating for a balanced approach to education,the policy resonates with the principles of STEAM education,which seeks to cultivate versatile and innovative individuals.Mathematics,acting as a unifying force,connects disparate STEAM disciplines,fostering interdisciplinary collaboration and preparing students to thrive in a rapidly evolving,technology-driven world.This essay provides an in-depth exploration of the multifaceted role of mathematics in STEAM education,drawing on specific cases and scholarly references to highlight its contributions to creativity,critical thinking,and holistic development.

Research on WSN Double-Radius Localization Algorithm Based on Partition Judgment Mechanism

Localization technology is an important support technology for WSN(Wireless Sensor Networks). The centroid algorithm is a typical range-free localization algorithm, which possesses the advantages such as simple localization principle and easy realization. However, susceptible to be influenced by the density of anchor node and uniformity of deployment, its localization accuracy is not high. We study localization principal and error source of the centroid algorithm. Meanwhile, aim to resolve the problem of low localization accuracy, we proposes a new double-radius localization algorithm, which makes WSN node launch periodically two rounded communications area with different radius to enable localization region to achieve the second partition, thus there are some small overlapping regions which can narrow effectively localization range of unknown node. Besides, partition judgment mechanism is proposed to ascertain the area of unknown node, and then the localization of small regions is realized by the centroid algorithm. Simulation results show that the algorithm without adding additional hardware and anchor nodes but increases effectively localization accuracy and reduces the dependence on anchor node.

浅谈SOP测编一体机Double Unit的预防及改善

随着半导体行业的飞速发展,市场对半导体产品质量要求愈加严格,其中测试工序起着非常重要作用。为了能在当今激烈的半导体市场竞争中立于不败之地,质量对于半导体生产厂家来说是开拓市场、稳占先机的一把利剑。为了保证产品质量,在测试生产过程中针对Double Unit对质量影响的隐患,需要制定各类措施预防,防止因为Double Unit引发出各种质量问题,对企业造成重大损失。本文主要介绍和讨论了企业在半导体的生产过程中,改善、强化设备对于预防Double Unit的各种功能的过程及措施。

碳排放权交易对建筑业绿色发展水平的影响

“双碳”目标下,碳排放权交易政策作为市场激励型环境规制的重要手段,对各行业的低碳发展有着重要意义。基于2007—2021年中国各省份、直辖市的面板数据,采用多期双重差分法实证分析了碳排放权交易政策对建筑业绿色发展水平的影响。结果表明:实施碳排放权交易政策可显著提升建筑业绿色发展水平,这一提升可通过技术创新、建筑业能源结构转型等作用机制实现,其中介效应值为0.015和0.046。鉴于此,需建立更完善的碳排放权交易体系、更明确的交易规则和市场机制,以实现建筑业绿色发展。

肩关节镜下双排缝合桥技术治疗老年肩袖损伤46例

目的 探讨肩关节镜下双排缝合桥修复手术对老年肩袖损伤病人疼痛、手臂与肩部功能障碍(DASH)评分及再撕裂发生率的影响。方法 回顾性分析2018年8月至2020年2月阜阳市第二人民医院收治的89例老年肩袖损伤病人的临床资料,依照手术方法的不同划分成对照组(肩关节镜下单排铆钉固定)、治疗组(肩关节镜下双排缝合桥修复手术),分别为43例、46例。于术前、术后1年采用视觉模拟评分法(VAS)评定患肩疼痛度,采用手臂与肩部功能障碍(DASH)评分量表评定肩关节功能,测量患肩关节前屈、外展活动度,并统计两组1年内再撕裂发生率。通过logistic回归分析确定病人术后再撕裂发生的影响因素。结果 术后1年两组不同撕裂程度病人VAS、DASH评分及患肩关节前屈、外展活动度与同组术前相比均明显改善(均P<0.05),术后两组轻度撕裂病人上述指标改善情况比较差异无统计学意义(均P>0.05),而治疗组中、重度撕裂病人上述指标改善情况均明显较对照组优(均P<0.05);治疗组再撕裂发生率4.35%明显较对照组的23.26%低(P<0.05);年龄、手术方式是病人术后再撕裂发生的影响因素(均P<0.05)。结论 对老年肩袖损伤病人实施肩关节镜下双排缝合桥修复手术,可有效改善患肩疼痛及功能,显著降低再撕裂发生率。

智能技术支持的“双减”实施路径研究

“双减”政策出台以来,引起社会各方的高度关注。在对政策的理解与落实中,普遍出现“以盲目减量为目标”和“实践中‘明减’变为‘暗升’”的两大误区。针对这一问题,从对“双减”本质的再认识出发,明确“双减”政策在我国教育发展战略中的重要地位,以及聚焦新时代课堂价值观和课堂“减负提质增效”的本质意蕴,揭示“双减”是教育可持续发展、教育新生态和人才培养的途径和保障。同时,落实“双减”应以课堂教学为主阵地,在以发展智能技术支持教育服务为核心的教育新基建“数字底座”的支撑下,合理利用在线教育平台、人工智能、区块链、云计算、大数据等技术,记录教育教学的全过程,结合智能测评及分析等技术辅助课堂教学模式的创新,满足学生差异化需求,形成以智能技术支持的精准的个性化教学、智能化的作业管理和设计、数据驱动的多元化教学评价、以智能平台为依托的“家—校—社”协同育人“大环境”的实施路径,实现“提质增效减负”的目标,以期为“双减”政策的实施提供理论指导与实践路径。

能源技术进步与区域专业化——特高压输电工程的视角

基于2003—2020年中国285个地级市数据,以特高压输电工程为切入点,研究能源技术进步对区域专业化的影响及作用机制。结果显示:以特高压输电技术为代表的能源技术进步显著提升了区域专业化水平,具体而言,较没有特高压输电项目城市,配备特高压输电工程城市的专业化水平提升约1.09%,且该效应在中小城市、资源丰富城市和内陆地区更强;在考虑样本选择偏差、基期分工水平、调整指标测度、剔除极端值并进行安慰剂检验和倾向得分匹配后,该结果依然稳健;进一步的机制分析表明,特高压建设所表征的能源技术进步通过激发资源禀赋的比较优势、生产的集聚效应来促进地区专业化。继续扩大特高压输电规模,合理实施区域专业化,互通有无、取长补短,对促进区域协调发展具有重要意义。