The Subduction Structure Beneath the New Britain Island Arc and the Adjacent Region from Double-Difference Tomography

We applied double-difference tomography to relocate seismic events and determine the lithospheric velocity structure beneath the New Britain Island arc and the South Bismarck Sea Basin,based on the local P wave arrival time dataset collected by the International Seismological Centre.Results of the seismic relocation and velocity inversion show that the subduction of Solomon Sea Plate along the New Britain Trench is spatially different above 150 km,and the subduction angle of the slab on the west side is higher than that on the east side.The relocated earthquakes also show that there are double seismic zones at the depths of about 30–90km beneath the New Britain Island Arc.The velocity structure shows that the dehydration of the subducting slab caused the low-velocity anomalies in mantle wedge above the slab,which are associated with the magmatic activities around the New Guinea-New Britain Island arc.Moreover,it shows that there is another low-velocity anomaly zone beneath the Bismarck mid-oceanic ridge with spatial variation.Beneath the west of the Bismarck mid-oceanic ridge,the low-velocity anomaly is weakly connected to the subducted Solomon Sea slab.Conversely,the low-velocity anomaly beneath the Manus Sea Basin is highly intertwined to the subducting slab and its mantle wedge,indicating that the subduction of the Solomon Sea Plate might be a key deep dynamic factor that drives the spreading of the Manus Sea Basin and the separation of the Bismarck Plate.

Double-difference tomography of P- and S-wave velocity structure beneath the western part of Java, Indonesia

West Java in the western part of the Sunda Arc has a relatively high seismicity due to subduction activity and faults.In this study,double-difference tomography was used to obtain the 3D velocity tomograms of P and S waves beneath the western part of Java.To infer the geometry of the structure beneath the study area,precise earthquake hypo・center determination was first performed before tomographic imaging.For this,earthquake waveform data were extracted from the regional Meteorological,Climatological,Geophysical Agency(BMKG)network of Indonesia from South Sumatra to Central Java.The P and S arrival times for about 1,000 events in the period April 2009 to July 2016 were selected,the key features being events of magnitude>3,azimuthal gap<210°and number of phases>8.A nonlinear method using the oct-tree sampling algorithm from the NonLinLoc program was employed to determine the earthquake hypocenters.The hypocenter locations were then relocated using double-difference tomography(tomoDD).A significant reduction of travel-time(root mean square basis)and a better clustering of earthquakes were achieved which correlated well with the geological structure in West Java.Double-difference tomography was found to give a clear velocity structure,especially beneath the volcanic arc area,i.e.,under Mt Anak Krakatau,Mt Salak and the mountains complex in the southern part of West Java.Low velocity anomalies for the P and S waves as well as the vp/vs ratio below the volcanoes indicated possible partial melting of the upper mantle which ascended from the subducted slab beneath the volcanic arc.

Application of the Double-difference Relocation Method Combined with Waveform Cross-correlation on the Three Gorges Reservoir Seismicity

In this paper,we use the double difference location method based on waveform crosscorrelation algorithm for precise positioning of the Three Gorges Reservoir( TGR)earthquakes and analysis of seismic activity. First,we use the bi-spectrum cross-correlation method to analyze the seismic waveform data of TGR encrypted networks from March,2009 to December,2010,and evaluate the quality of waveform cross-correlation analysis.Combined with the waveform cross-correlation of data obtained, we use the double difference method to relocate the earthquake position. The results show that location precision using bi-spectrum verified waveform cross-correlation data is higher than that by using other types of data,and the mean 2 sig-error in EW,NS and UD are 3.2 m,3.9 m and 6.2 m,respectively. For the relocation of the Three Gorges Reservoir earthquakes,the results show that the micro-earthquakes along the Shenlongxi river in the Badong reservoir area obviously show the characteristics of three linear zones with nearly east-west direction,which is in accordance with the small faults and carbonate strata line of the neotectonic period,revealing the reservoir water main along the underground rivers or caves permeated and induced seismic activity. The stronger earthquakes may have resulted from small earthquakes through the active layers.

Accurate relocation of earthquakes in central-western China using the double-difference earthquake location algorithm

The double-difference earthquake relocation algorithm (DD algorithm) has been applied to the accurate relocation of 10057 earthquakes in the central-western China (21°-36°N, 98°-112E°) during the period of 1992-1999. In total, 79706 readings for P waves and 72169 readings for S waves were used in the relocation, and the source parameters of 6496 events were obtained. The relocation results revealed a more complete picture of the hypocentral distribution in the central-western China. In several seismic belts the relocated epicenters present a more defined lineation feature, reflecting the close correlation between the seismicity and the active tectonic structures. The relocated focal depths confirmed that most earthquakes (91 percent of the 6496 relocated events) in the central-western China were located at shallower depths not deeper than 20 km. The distribution of focal depths indicates that the seismogenic layer in the central-western China is located in the upper-mid crust with its thickness no deeper than 20 km.

The MW5.5 earthquake on August 6,2023,in Pingyuan,Shandong,China:A rupture on a buried fault

On August 6,2023,a magnitude MW5.5 earthquake struck Pingyuan County,Dezhou City,Shandong Province,China.This event was significant as no large earthquakes had been recorded in the region for over a century,and no active fault had been previously identified.This study collects 1309 P-wave arrival times and 866 S-wave arrival times from 74 seismic stations less than 200 km to the epicenter to constrain the spatial distribution of the mainshock and its 125 early aftershocks by the double difference earthquake relocation method,and selects 864 P-waveforms from 288 stations located within 800 km of the epicenter to constrain the focal mechanism solution of the mainshock through centroid moment tensor inversion.The relocation and the inversion indicate,the Pingyuan MW5.5 earthquake was caused by a rupture on a buried fault,likely an extensive segment of the Gaotang fault.This buried fault exhibited a dip of approximately 75°to the northwest,with a strike of 222°,similar to the Gaotang fault.The rupture initiated at the depth of 18.6 km and propagated upward and northeastward.However,the ground surface was not broken.The total duration of the rupture was~6.0 s,releasing the scalar moment of 2.5895×1017 N·m,equivalent to MW5.54.The moment rate reached the maximum only 1.4 seconds after the rupture initiation,and the 90%scalar moment was released in the first 4.6 s.In the first 1.4 seconds of the rupture process,the rupture velocity was estimated to be 2.6 km/s,slower than the local S-wave velocity.As the rupture neared its end,the rupture velocity decreased significantly.This study provides valuable insights into the seismic characteristics of the Pingyuan MW5.5 earthquake,shedding light on the previously unidentified buried fault responsible for the seismic activity in the region.Understanding the behavior of such faults is crucial for assessing seismic hazards and enhancing earthquake preparedness in the future.

Decadal Forecasts of Large Earthquakes along the Northern San Andreas Fault System, California: Increased Activity on Regional Creeping Faults Prior to Major and Great Events

The three largest earthquakes in northern California since 1849 were preceded by increased decadal activity for moderate-size shocks along surrounding nearby faults. Increased seismicity, double-difference precise locations of earthquakes since 1968, geodetic data and fault offsets for the 1906 great shock are used to re-examine the timing and locations of possible future large earthquakes. The physical mechanisms of regional faults like the Calaveras, Hayward and Sargent, which exhibit creep, differ from those of the northern San Andreas, which is currently locked and is not creeping. Much decadal forerunning activity occurred on creeping faults. Moderate-size earthquakes along those faults became more frequent as stresses in the region increased in the latter part of the cycle of stress restoration for major and great earthquakes along the San Andreas. They may be useful for decadal forecasts. Yearly to decadal forecasts, however, are based on only a few major to great events. Activity along closer faults like that in the two years prior to the 1989 Loma Prieta shock needs to be examined for possible yearly forerunning changes to large plate boundary earthquakes. Geodetic observations are needed to focus on identifying creeping faults close to the San Andreas. The distribution of moderate-size earthquakes increased significantly since 1990 along the Hayward fault but not adjacent to the San Andreas fault to the south of San Francisco compared to what took place in the decades prior to the three major historic earthquakes in the region. It is now clear from a re-examination of the 1989 mainshock that the increased level of moderate-size shocks in the one to two preceding decades occurred on nearby East Bay faults. Double-difference locations of small earthquakes provide structural information about faults in the region, especially their depths. The northern San Andreas fault is divided into several strongly coupled segments based on differences in seismicity.

P-wave velocity structure beneath reservoirs and surrounding areas in the lower Jinsha River

The lower reaches of the Jinsha River are rich in hydropower resources because of the high mountains,deep valleys,and swift currents in this area.This region also features complex tectonic structures and frequent earthquakes.After the impoundment of the reservoirs,seismic activity increased significantly.Therefore,it is necessary to study the P-wave velocity structure and earthquake locations in the lower reaches of the Jinsha River and surrounds,thus providing seismological support for subsequent earthquake prevention and disaster reduction work in reservoir areas.In this study,we selected the data of 7.670 seismic events recorded by the seismic networks in Sichuan.Yunnan,and Chongqing and the temporary seismic arrays deployed nearby.We then applied the double-difference tomography method to this data,to obtain the P-wave velocity structure and earthquake locations in the lower reaches of the Jinsha River and surrounds.The results showed that the Jinsha River basin has a complex lateral P-wave velocity structure.Seismic events are mainly distributed in the transition zones between high-and low-velocity anomalies,and seismic events are particularly intense in the Xiluodu and Baihetan reservoir areas.Vertical cross-sections through the Xiangjiaba and Xiluodu reservoir areas revealed an apparent high-velocity anomaly at approximately 6 km depth:this high-velocity anomaly plays a role in stress accumulation,with few earthquakes distributed inside the high-velocity body.After the impoundment of the Baihetan reservoir,the number of earthquakes in the reservoir area increased significantly.The seismic events in the reservoir area north of 27°N were related to the enhanced activity of nearby faults after impoundment:the earthquakes in the reservoir area south of 27°N were probably induced by additional loads(or regional stress changes),and the multiple microseismic events may have been caused by rock rupture near the main faults under high pore pressure.

Relocation of the 10 March 2011 Yingjiang,China,earthquake sequence and its tectonic implications

An earthquake with MS5.8 occurred on 10 March 2011 in Yingjiang county,western Yunnan,China.This earthquake caused 25 deaths and over 250 injuries.In order to better understand the seismotectonics in the region,we collected the arrival time data from the Yunnan seismic observational bulletins during 1 January to 25 March 2011,and precisely hand-picked the arrival times from high-quality seismograms that were recorded by the temporary seismic stations deployed by our Institute of Crustal Dynamics,China Earthquake Administration.Using these arrival times,we relocated all the earthquakes including the Yingjiang mainshock and its aftershocks using the double-difference relocation algorithm.Our results show that the relocated earthquakes dominantly occurred along the ENE direction and formed an upside-down bow-shaped structure in depth.It is also observed that after the Yingjiang mainshock,some aftershocks extended toward the SSE over about 10 km.These results may indicate that the Yingjiang mainshock ruptured a conjugate fault system consisting of the ENE trending Da Yingjiang fault and a SSE trending blind fault.Such structural features could contribute to severely seismic hazards during the moderate-size Yingjiang earthquake.

High-precision relocation of the aftershock sequence of the January 8,2022,M_(S)6.9 Menyuan earthquake

The 2022 Menyuan M_(S)6.9 earthquake,which occurred on January 8,is the most destructive earthquake to occur near the Lenglongling(LLL)fault since the 2016 Menyuan M_(S)6.4 earthquake.We relocated the mainshock and aftershocks with phase arrival time observations for three days after the mainshock from the Qinghai Seismic Network using the double-difference method.The total length and width of the aftershock sequence are approximately 32 km and 5 km,respectively,and the aftershocks are mainly concentrated at a depth of 7-12 km.The relocated sequence can be divided into 18 km west and 13 km east segments with a boundary approximately 5 km east of the mainshock,where aftershocks are sparse.The east and west fault structures revealed by aftershock locations differ significantly.The west fault strikes EW and inclines to the south at a 71°-90°angle,whereas the east fault strikes 133°and has a smaller dip angle.Elastic strain accumulates at conjunctions of faults with different slip rates where it is prone to large earthquakes.Based on surface traces of faults,the distribution of relocated earthquake sequence and surface ruptures,the mainshock was determined to have occurred at the conjunction of the Tuolaishan(TLS)fault and LLL fault,and the west and east segments of the aftershock sequence were on the TLS fault and LLL fault,respectively.Aftershocks migrate in the early and late stages of the earthquake sequence.In the first 1.5 h after the mainshock,aftershocks expand westward from the mainshock.In the late stage,seismicity on the northeast side of the east fault is higher than that in other regions.The migration rate of the west segment of the aftershock sequence is approximately 4.5 km/decade and the afterslip may exist in the source region.

Fault plane parameters of Tancheng M81/2 earthquake on the basis of present-day seismological data

The great Tancheng earthquake of M81/2 occurred in 1668 was the largest seismic event ever recorded in history in eastern China.This study determines the fault geometry of this earthquake by inverting seismological data of present-day moderate-small earthquakes in the focal area.We relocated those earthquakes with the double-difference method and found focal mechanism solutions using gird test method.The inversion results are as follows:the strike is 21.6°,the dip angle is 89.5°,the slip angle is 170°,the fault length is about 160 km,the lower-boundary depth is about 32 km and the buried depth of upper boundary is about 4 km.This shows that the seismic fault is a NNE-trending upright right-lateral strike-slip fault and has cut through the crust.Moreover,the surface seismic fault,intensity distribution of the earthquake,earthquake-depth distribution and seismic-wave velocity profile in the focal area all verified our study result.

Three-dimensional P-wave Velocity Structure Modelling of the Middle and Lower Reaches of the Yangtze River Metallogenic Belt: Crustal Architecture and Metallogenic Implications

In this study,we compiled and analyzed 69310 P-wave travel-time data from 6639 earthquake events.These events(M≥2.0)occurred from 1980 s to June 2019 and were recorded at 319 seismic stations(Chinese Earthquake Networks Center)in the study area.We adopted the double-difference seismic tomographic method(tomo DD)to invert the 3-D P-wave velocity structure and constrain the crust-upper mantle architecture of the Middle and Lower Reaches of the Yangtze River Metallogenic Belt(MLYB).A 1-D initial model extracted from wide-angle seismic profiles was used in the seismic tomography,which greatly reduced the inversion residual.Our results indicate that reliable velocity structure of th e uppermost mantle can be obtained when Pn is involved in the tomography.Our results show that:(1)the pattern of the uppermost mantle velocity structure corresponds well with the geological partitioning:a nearly E-W-trending low-velocity zone is present beneath the Dabie Orogen,in contrast to the mainly NE-trending low-velocity anomalies beneath the Jiangnan Orogen.They suggest the presence of thickened lower crust beneath the orogens in the study area.In contrast,the Yangtze and Cathaysia blocks are characterized by relatively high-velocity anomalies;(2)both the ultra-high-pressure(UHP)metamorphic rocks in the Dabie Orogen and the low-pressure metamorphic rocks in the Zhangbaling dome are characterized by high-velocity anomalies.The upper crust in the Dabie Orogen is characterized by a low-velocity belt,sandwiched between two high velocity zones in a horizontal direction,with discontinuous low-velocity layers in the middle crust.The keel of the Dabie Orogen is mainly preserved beneath its northern section.We infer that the lower crustal delamination may have mainly occurred in the southern Dabie Orogen,which caused the mantle upwelling responsible for the formation of the granitic magmas emplaced in the middle crust as the low-velocity layers observed there.Continuous deep-level compression likely squeezed the granitic magma upward to intrude the upper crustal UHP metamorphic rocks,forming the'sandwich'velocity structure there;(3)high-velocity updoming is widespread in the crust-mantle transition zone beneath the MLYB.From the Anqing-Guichi ore field northeastward to the Luzong,Tongling,Ningwu and Ningzhen orefields,high-velocity anomalies in the crust-mantle transition zone increase rapidly in size and are widely distributed.The updoming also exists in the crust-mantle transition zone beneath the Jiurui and Edongnan orefields,but the high-velocity anomalies are mainly stellate distributed.The updoming high-velocity zone beneath the MLYB generally extends from the crust-mantle transition zone to the middle crust,different from the velocity structure in the upper crust.The upper crust beneath the Early Cretaceous extension-related Luzong and Ningwu volcanic basins is characterized by high velocity zones,in contrast to the low velocity anomalies beneath the Late Jurassic to Early Cretaceous compression-related Tongling ore field.The MLYB may have undergone a compressive-to-extensional transition during the Yanshanian(Jurassic-Cretaceous)period,during which extensive magmatism occurred.The near mantle-crustal boundary updoming was likely caused by asthenospheric underplating at the base of the lower crust.The magmas may have ascended through major crustal faults,undergoing AFC(assimilation and fractional crystallization)processes,became emplaced in the fault-bounded basins or Paleozoic sequences,eventually forming the many Cu-Fe polymetallic deposits there.

Seismic activities before and after the impoundment of the Xiangjiaba and Xiluodu reservoirs in the lower Jinsha River

The lower Jinsha River basin is located at the junction of Sichuan and Yunnan provinces in Southwest China,a region with intense tectonic movements and frequent moderate to strong seismic activities.Cascade hydropower stations have been constructed along the lower Jinsha River since 2012.However,research on the effect of the impoundment of large-scale cascade reservoirs in a river basin on local seismic activities is currently lacking.Accurately identifying earthquake locations is essential for studying reservoir-induced earthquakes.Analyzing the spatiotemporal migration process of seismic activities based on complete and precise earthquake relocation is fundamental for determining the fluid diffusion coefficient,constructing fault models for reservoir areas,identifying earthquake types,exploring earthquake mechanisms,and evaluating seismic hazards.The seismicity pattern in the Xiangjiaba and Xiluodu reservoir areas,where seismic activities had been weak for a long time,has changed with the successive impoundment of the two reservoirs,showing microseismic events and seismic clusters.We investigated the spatiotemporal characteristics of seismic activities in the Xiangjiaba and Xiluodu reservoir areas using the waveform cross-correlation-based double-difference relocation technique and the b-value analysis method.We discovered that seismic events after the impoundment of these two reservoirs exhibited different characteristics in different regions.The seismic activities at the Xiluodu dam quickly responded to the rising water level,with the seismic intensity decaying rapidly afterward.These events were concentrated in the limestone strata along both sides of the Jinsha River,with a shallow focal depth,generally within 5 km,and a high b-value of approximately 1.2.Such features are close to those of karst-type earthquakes.Microseismic activities frequent occur on the eastern bank of the Yongshan reservoir section downstream of the Xiluodu dam,with two parallel NW-trending earthquake strips visible after precise earthquake relocation.The M_(S)5.2 earthquake near Wuji town on August 17,2014,had prominent foreshocks and aftershocks distributed in a clear NW-trending 20-km-long strip,perpendicular to the riverbank.These seismic events had a low b-value of approximately 0.7.The orientation of the node plane revealed by the strike-slip focal mechanism of the mainshock is consistent with that of the strip formed by the foreshock-mainshock-aftershock sequence,indicating the existence of a NW-striking concealed fault.Seismic activities near the Yanjin-Mabian fault upstream of the Xiangjiaba reservoir area since 2013 were concentrated in a NW-trending strip,with several near EW-trending seismic clusters on its western side,and with the largest event having a magnitude of M_(L)3.7.So far,the impoundment of the Xiangjiaba and Xiluodu reservoirs has not triggered seismic activities on the large Jinyang-Ebian and Yanjin-Mabian faults nearby.

Seismic analysis of the Xiluodu reservoir area and insights into the geometry of seismogenic faults

The Xiluodu(XLD)reservoir is the second largest reservoir in China and the largest in the Jinsha River basin.The occurrence of two M>5 earthquakes after reservoir impoundment has aroused great interest among seismologists and plant operators.We comprehensively analyzed the seismicity of the XLD reservoir area using precise earthquake relocation results and focal mechanism solutions and found that the seismicity of this area was weak before impoundment.Following impoundment,earthquake activity increased significantly.The occurrence of M≥3.5 earthquakes within five years of impoundment also appear to be closely related to rapid rises and falls in water level,though this correlation weakened after five years because earthquake activity was far from the reservoir area.Earthquakes in the XLD reservoir area are clustered;near the dam(Area A),small faults are intermittently distributed along the river,while Area B is composed of multiple NW-trending left-lateral strikeslip faults and a thrust fault and Area C is composed of a NW-trending left-lateral strike-slip main fault and a nearly EWtrending right-lateral strike-slip minor fault.The geometries of the deep and the shallow parts of the NW-trending fault differ.Under the action of the NW-trending background stress field,a series of NW-trending left-lateral strike-slip faults and NE-trending thrust faults in critical stress states were dislocated due to the stress caused by reservoir impoundment.The two largest earthquakes in the XLD reservoir area were tectonic earthquakes that were directly triggered by impoundment.

Spatiotemporal evolution of the 2021 M_(S)6.4 Yangbi earthquake sequence

Based on the seismic phase reports of the Yangbi area from January 1 to June 25,2021,and the waveform data of M≥4 earthquakes,we obtained the relocation results and focal mechanism solutions of the M_(S)6.4 Yangbi earthquake sequence using the HypoDD and CAP methods.Based on our results,our main conclusions are as follows:(1)the M_(S)6.4 Yangbi earthquake sequence is a typical foreshock-mainshock-aftershock sequence.The fore-shocks of the first two stages have the obvious fronts of migration and their migration rate increased gradually.There was no apparent front of migration during the third stage,and the occurrence of the mainshock was related to stress triggering from a M5.3 foreshock.We tentatively speculate that the rupture pattern of the Yangbi earthquake sequence conforms to the cascading-rupture model;and(2)the main fault of the M_(S)6.4 Yangbi earthquake sequence is a NW-trending right-lateral strike-slip fault.As time progressed,a minor conjugate aftershock belt formed at the northwest end of this fault,and a dendritic branching structure emerged in the southern fault segment,showing a complex seismogenic fault structure.We suggested that the fault of the Yangbi earthquake sequence may be a young sub-fault of the Weixi-Weishan fault.

Determination of Focal Depths of the MS5.8 Alxa Left Banner,Inner Mongolia Earthquake Sequence

Using the double-difference earthquake location algorithm,the deterministic method (PTD method) and the CAP seismic moment tensor inversion method,the paper selects the primary waveform data of 78 earthquakes recorded by the "China Earthquake Science Array Probe Project in the Northern Part of North South Seismic Belt ",the "China Earthquake Scientific Exploration Array Data Center"of Institute of Geophysics,China Earthquake Administration,and the Inner Mongolia Digital Seismic Network to calculate the focal depths of the mainshock and the seismic sequence of the M_S5.8 Alxa Left Banner earthquake in Inner Mongolia. The results show that the focal depth of the main shock is 20. 6 km,determined by the double-difference earthquake location method,18. 1 km by the PTD method,and 19. 2 km by the CAP method. The focal depth of the earthquake sequence calculated by the double-difference location method is larger. The deterministic method (PTD method) and double-difference location method are the methods that fit the tectonic characteristics of the seismic source area,and the CAP method is suitable for larger earthquakes.

Seismic imaging of aftershock gap between Lushan and Wenchuan earthquakes

New Vp and Vs models of the aftershock gap between the 2013 Lushan and 2008 Wenchuan earthquakes were obtained using 7190 events recorded by 102 stations in the southeastern margin of the Tibetan Plateau. The new velocity models and event locations were inverted by the regional-scale version of double-difference tomography algorithm. The new velocity structure shows that the aftershock gap is an obviously low-velocity zone in the upper crust,whereas the aftershock regions of the Lushan and Wenchuan earthquakes show high-velocity anomalies. The low-velocity anomaly of the aftershock gap in the upper crust may indicate that the materials of the gap are weak and ductile,which is not prone to accumulate stress and cause big earthquakes. As a result,it is less likely that the big earthquakes will occur in the gap in the future.

Aftershock sequence relocation of the 2021 M_(S)7.4 Maduo Earthquake, Qinghai, China

The 2021 Qinghai Maduo M_(S)7.4 earthquake was one of the strongest earthquakes that occurred in the Bayan Har block of the Tibetan Plateau during the past 30 years,which spatially filled in the gap of strong earthquake in the eastern section of the northern block boundary.In this study,the aftershock sequence within 8 days after the mainshock was relocated by double difference algorithm.The results show that the total length of the aftershock zone is approximately 170 km;the mainshock epicenter is located in the center of the aftershock zone,indicating a bilateral rupture.The aftershocks are mainly distributed along NWW direction with an overall strike of 285°.The focal depth profiles indicate that the seismogenic fault is nearly vertical and dips to southwest or northeast in different sections,indicating a complex geometry.There is an aftershock gap located to the southeast of the mainshock epicenter with a scale of approximately 20 km.At the eastern end of the aftershock zone,horsetaillike branch faults show the terminal effect of a large strike-slip fault.There is a NW-trending aftershock zone on the north side of the western section,which may be a branch fault triggered by the mainshock.The location of the aftershock sequence is close to the eastern section of the Kunlun Mountain Pass-Jiangcuo(KMPJ)fault.The sequence overlaps well with surface trace of the KMPJ fault.We speculate that the KMPJ fault is the main seismogenic fault of the M_(S)7.4 Maduo earthquake.

Relocation of the Foreshocks and Aftershocks of the 2021 Ms 6.4 Yangbi Earthquake Sequence,Yunnan,China

An Ms 6.4 earthquake occurred in Yangbi,Yunnan,China on May 21,2021,which has obvious foreshock activity and abundant aftershocks.Based on the seismic observation data recorded by the Yunnan Seismic Network three days before and seven days after the mainshock,a doubledifference location method was used to relocate 2133 earthquakes of the Yangbi sequence.Aftershocks are mostly distributed to the southeast of the mainshock in a unilateral rupture pattern.This sequence exhibits a SE-trending linear alignment with a length of about 25 km,and most of the focal depth is above 12 km.Integrated with the seismic distribution and focal mechanism results,we infer that the strike of the seismogenic fault is about 140°,and dipping to the SW.The fault structure revealed by the seismic sequence is complex,with the NW segment exhibiting a steep dip and relatively simple structure of strike-slip rupture and the SE segment consisting of several branching ruptures.The Yangbi Earthquake is a typical foreshock-mainshock-aftershock sequence,and the mainshock is likely triggered by the largest foreshock.This earthquake occurred in the boundary between high-and lowvelocity anomalous zone,where is susceptible to generate large earthquakes.