Microfluidic assisted 90%loading CL-20 spherical particles:Enhancing self-sustaining combustion performance

The performance of the chemical fuel determines the altitude,range and longevity of spacecraft in air and space exploration.Promising alternatives(e.g.,hypergolic ionic liquids or high-energy composites)with high-energy density,heat of formation and fast initial rate are considered as potential chemical fuels.As the high-energy density material,hexanitrohexaazaisowurtzitane(CL-20)often serves as secondary explosive with poor self-propagating combustion behaviors.Herein,90%loading CL-20 microspheres with uniform particle sizes are precisely prepared by microfluid method,which exhibit unique hierarchical structure.The morphology,thermal behaviors,as well as combustion performance were further investigated.The results demonstrated that as-prepared spherical particles exhibit prominent thermal compatibility,and the enhanced self-sustaining combustion performance.This work provides an efficient method achieving the uniform high-energy density particles with excellent self-sustaining combustion performance.

Preparation of Spherical Tungsten Particles Assisted by Hydrothermal Method

We presented a strategy to prepare spherical tungsten powder by the combination of hydrothermal method and H2reduction process.In hydrothermal process,the micelle of tetraethylammonium bromide(TEAB)act as spherical templates for the deposition of tungsten oxide,whereas the excessive TEAB inhibit the formation of spherical tungsten oxide due to the dense molecular layer of TEAB on the tungsten oxide particles.Citric acid(CA)can control the formation rate and structure of the tungsten oxide when its concentration is more than 0.2 mol/L,because of its ability to coordinate with tungsten atoms.The synergistic effect of TEAB and CA facilitates the formation of spherical tungsten oxide with nanorod crown.After being treated by H_(2)at 600 and 650℃,the tungsten oxide particles are reduced to tungsten particles,which maintain the spherical structure of tungsten oxide and have porous structure.

Blockage of the Deep-Sea Mining Pump Transporting Large Particles with Different Sphericity

The present study aims to plumb blockage of the deep-sea mining pump transporting large particles with different shapes. A numerical work was performed through combining the computational fluid dynamics(CFD) technique and the discrete element method(DEM). Six particle shapes with sphericity ranging from 0.67 to 1.0 were selected. A velocity triangle is built with the absolute, relative, and circumferential velocities of particles. Velocity triangles with absolute velocity angles ranging from 90° to 180° prevail in the first-stage impeller. With declining sphericity, more particles follow the velocity triangle with absolute velocity angles ranging from 0° to 90°, which weakens the ability of particles to pass through the flow passage. Furthermore, the forces acting on the particles traveling in the impeller passage are analyzed. Large particles, especially non-spherical ones, suffer from high centrifugal force and therefore move along the suction surface of the impeller blades. Non-spherical particles undergo great drag force as a result of large surface area. The distribution of drag force angles is featured by two peaks, and one vanishes due to blockage.As particle sphericity declines, both magnitude and angle of the pressure gradient force decrease. Variation of the drag force and the pressure gradient force causes clockwise deflection of the centripetal force, resulting in deflection and elongation of particle trajectory, which increases the possibility of blockage.

Spherical YAG∶Ce^(3+) Phosphor Particles Prepared by Spray Pyrolysis

Spherical YAG：Ce^3＋ phosphor particles with narrow size distribution were prepared by spray pyrolysis. The effects of the concentration of solution, the flow rate of cartier gas and the annexing temperature on the phosphor morphology were studied. The productivity of precursor particles shows a trend of drop after rising with the increase of concentration Raising the flow rate of nitrogen can improve the productivity of the precursor particles. Phosphor prepared by spray pyrolysis has obviously higher emission intensity than that synthesized by solid state reaction, spray pyrolysis makes Ce^3＋ ions well distributed in the crystal lattice as the luminescent centers, and phosphor particles have regular sphericity and narrow size distribution.

Micromorphological characterization and random reconstruction of 3D particles based on spherical harmonic analysis

The microscopic characteristics of skeletal particles in rock and soil media have important effects on macroscopic mechanical properties. A mathematical procedure called spherical harmonic function analysis was here developed to characterize micromorphology of particles and determine the meso effects in a discrete manner. This method has strong mathematical properties with respect to orthogonality and rotating invariance. It was used here to characterize and reconstruct particle micromorphology in three-dimensional space. The applicability and accuracy of the method were assessed through comparison of basic geometric properties such as volume and surface area. The results show that the micromorphological characteristics of reproduced particles become more and more readily distinguishable as the reproduced order number of spherical harmonic function increases, and the error can be brought below 5% when the order number reaches 10. This level of precision is sharp enough to distinguish the characteristics of real particles. Reconstructed particles of the same size but different reconstructed orders were used to form cylindrical samples, and the stress-strain curves of these samples filled with different-order particles which have their mutual morphological features were compared using PFC3D. Results show that the higher the spherical harmonic order of reconstructed particles, the lower the initial compression modulus and the larger the strain at peak intensity. However, peak strength shows only a random relationship to spherical harmonic order. Microstructure reconstruction was here shown to be an efficient means of numerically simulating of multi-scale rock and soil media and studying the mechanical properties of soil samples.

Preparation of Fine Spherical Particle Sized Ceria by Precipitation Method with Ammonium Bicarbonate

Fine spherical particle sized ceria (CeO_2) was prepared by homogeneous precipitation method with ammonium bicarbonate as precipitant. The prepared CeO_2 has the primary particle size of 10～50 nm when calcined between 400～700 ℃ analyzed by XRD and the aggregated particle size is about 300 nm measured by LASER particle sizer. SEM, TG-DTA and Zeta-potential analyzer were employed individually to study the morphology and the formation of CeO_2 product. It was found that excess NH_4NO_3 can serve as an sphericallization agent to prepare spherical CeO_2 powder by precipitation method.

Empirical formulae for electric double-layer repulsion between two arbitrarily inclined clay particles

To understand the mesoscopic mechanism of clayey soil in view of macroscopic behavior, it is essential to quantitatively calculate the electric double-layer repulsion between arbitrarily inclined clay particles.However, suitable calculation methods with high efficiency and accuracy are still rare at present in literature. Based on a great number of numerical calculations of the repulsion between two inclined platy clay particles, explicit empirical formulae for estimating electric double-layer repulsion between clay particles are put forward. Comparison between the empirical solutions and corresponding numerical results shows that the proposed formulae have a reasonable accuracy, and application of the presented formula is easy and efficient.

Effective Elastic Properties of 3-Phase Particle Reinforced Composites with Randomly Dispersed Elastic Spherical Particles of Different Sizes Dedicated to Professor Karl Stark Pister for his 95th birthday

Higher-order multiscale structures are proposed to predict the effective elastic properties of 3-phase particle reinforced composites by considering the probabilistic spherical particles spatial distribution,the particle interactions,and utilizing homogenization with ensemble volume average approach.The matrix material,spherical particles with radius a1,and spherical particles with radius a2,are denoted as the 0th phase,the 1st phase,and the 2nd phase,respectively.Particularly,the two inhomogeneity phases are different particle sizes and the same elastic material properties.Improved higher-order(in ratio of spherical particle sizes to the distance between the centers of spherical particles)bounds on effective elastic properties of 3-phase particle reinforced proposed Formulation II and Formulation I derive composites.As a special case,i.e.,particle size of the 1st phase is the same as that of the 2nd phase,the proposed formulations reduce to 2-phase formulas.Our theoretical predictions demonstrate excellent agreement with selected experimental data.In addition,several numerical examples are presented to demonstrate the competence of the proposed frameworks.

Effect of Spherical Particle Size on the Electrochemical Properties of Lithium Iron Phosphate

The effect of spherical particle size on the surface morphology, electrochemical property and processability of lithium iron phosphate was systematically studied. Spherical lithium iron phosphate with different particle size distributions controlled with ball time of precursor slurry was prepared by spray drying method. The samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), charge and discharge measurements and EIS. The electrochemical performances of the sample materials were measured by coin cells and 14500 batteries. XRD shows that the spherical lithium iron phosphate with different particle sizes all have good crystal structure due to the perfect mixing of the raw materials and rapid drying. The lithium iron phosphate microsphere with different particle sizes self-assembled with submicron primary particles has a core-shell structure. The longer ball time the precursors are, the smaller the active material particles are prepared. The electrode material with 6 h ball time of precursor slurry has the best physical properties and the processability. The composite has a uniform particle size and higher tap density of 1.46 g/cm3, which delivers a discharge capacity of 167.6 mAh/g at a discharge rate of 0.5 C. The results were confirmed by the 14 500 mA h cylindrical batteries, which delivers a discharge capacity of 579 mAh at 0.5 C. And low-temperature performance with capacity of 458.5 mA h at -20 °C under a discharge rate of 0.5 C is the 79.2% of the same discharge rate at 25 °C. Otherwise, the 14500 batteries also exhibit excellent cycling performance and the capacity maintains 93% after 2 000 cycles.

Using three-dimensional discrete spherical Fourier descriptors based on surface curvature voxels for pollen particle recognition

This paper presents a new method for extract three-dimensional （3D） discrete spherical Fourier descriptors based on surface curvature voxels for pollen particle recognition. In order to reduce the high amount of pollen information and noise disturbance, the geometric normalized curvature voxels with the principal curvedness are first extracted to represent the intrinsic pollen volumetric data. Then the curvature voxels are decomposed into radial and angular components with spherical harmonic transform in spherical coordinates. Finally the 3D discrete Fourier transform is applied to the decomposed curvature voxels to obtain the 3D spherical Fourier descriptors for pollen recognition. Experimental results show that the presented descriptors are invariant to different pollen particle geometric transformations, such as pose change and spatial rotation, and can obtain high recognition accuracy and speed simultaneously.

Particle Velocity Measurement for Spherical Wave in Solid

An experimental technique for research on spherical divergent wave propagation in a solid has been developed, in which the source of generating spherical wave is a center initiating explosive charge designed in a mini-spherical shape with yield equivalent to 0.125?g and 0.486?g TNT and a set of circular electromagnetic particle velocity gages is used to record the particle velocity histories. By using the circular electromagnetic particle velocity gages, the signal outputs not only are unattenuated due to the geometrical divergence, but also represent the average of the measured dynamic states of the medium over a circle on the wavefront. The distinctive features of this technique are very useful for the study of spherical divergent wave propagation in a solid, especially in an inhomogeneous solid, and the corresponding material dynamics. Many experimental measurements were conducted in polymethylmethacrylate (PMMA) and granite by means of the technique, and the reproducibility of tests was shown to be good. The measurement technique of the circular electromagnetic particle velocity gages is also suitable to the case of cylindrical wave.

Calculation of terminal velocity in transitional flow for spherical particle

The terminal velocity has been widely used in extensive fields, but the complexity of drag coefficient expression leads to the calculation of terminal velocity in transitional flow （1 〈 Re ≤ 1000） with much more difficulty than those in laminar flow （Re ≤ 1） and turbulent flow （Re ≥ 1000）. This paper summarized and compared 24 drag coefficient correlations, and developed an expression for calculating the terminal velocity in transitional flow, and also analyzed the effects of particle density and size, fluid density and viscosity on terminal velocity. The results show that 19 of 24 previously published correlations for drag coefficient have good prediction performance and can be used for calculating the terminal velocity in the entire transitional flow with higher accuracy. Adapting two dimensionless parameters （w＊, d＊）, a proposed explicit correlation, w＊=-25.68654 × exp （-d＊/77.02069）＋ 24.89826, is attained in transitional flow with good performance, which is helpful in calculating the terminal velocity.

THE MOTION OF A SPHERICAL PARTICLE IN THE STOKES FLOW OUTSIDE A CIRCULAR ORIFICE

For any study ofa suspension entering a pore, the knowledge of the force and moment exerted on a solute particle in an arbitrary position outside the pore is essential, 'This paper for the first lime presents approximate analytical expressions (in closed form) of all the twelve force and moment coefficienis for a sphere outsied a circular orifice, on the basis of a number of discrete data computed by Yan et al(1987).These coefficients are then applied to calculate the trajectory and angular velocity of a spherical particle approaching the pore at zero Reynolds number. The trajectory is in excellent agreement with the available experimental results. An analysis of the relative importance of the coefficients shows that the rotation effect cannot be neglected near the pore opening or near the wall, and that the lateral force effect must be taken into account in the neighborhood of the edge of the pore opening. It is due to neglecting these factors that previous theoretical results deviate from the experimental ones near the pore opening. The effects of the ratio of the particle to pore radii as well as the influences of the graritytbuoyance on the particle trajectory, velocity distribution and rotation are discnssed in detail. It is pointed out that in the experiments of neutrally-buoyant suspensions, the restriction on the density of the particle is most demanding for a large particle size.The expressions of forces and moments presenled herein are complete, relatively accurate and convenient, thus providing a good prerequisite for further studies of any problems involving the entrance of particles to a pare.

THE EFFECTIVE MODULI OF COMPOSITE REINFORCED BY SPHERICALCOATING PARTICLES

The effective moduli of composite reinforced by spherical coating particles are investigated by the four phase spheroidal model and the theory of equivalent media. The theoretical predicting formulae of bulk modulus and shear modulus have been derived for this kind of composite in this paper. These formulae can reduce to the results of three phase spheroidal model which had been obtained by others for composite reinforced by particles.

Particle morphology control for spherical powder fabrication using the ball milling process with DEM simulation

Characteristics of spherical particles on copper powder and changing sizes were studied in a ball mill under various experimental conditions,such as different ball diameters,high rotation speeds,and milling times,using a discrete element method(DEM)simulation.This experiment has investigated the characteristics of spherical particle morphology evolution involved in the mechanical alloying of copper powder.The morphological evolution of the copper particle was analyzed using scanning electron microscopy(SEM).A spherical copper particle was shown with a roundness value using imageJ software.The DEM was used to simulate the ball motion in a planetary ball mill,and the impact energy and shear energy generated during the collision were analyzed to estimate the contact number between the ball and the ball wall.Therefore,as the size of the ball decreased,the number of ball-to-ball and ball-to-wall contacts increased accordingly,and the spherical shape of the copper powder changed.

Microscopic and spectroscopic analysis of atmospheric iron-containing single particles in Lhasa,Tibet

The Tibetan Plateau,known as the“Third Pole”,is currently in a state of perturbation caused by intensified human activity.In this study,56 samples were obtained at the five sampling sites in typical area of Lhasa city and their physical and chemical properties were investigated by TEM/EDS,STXM,and NEXAFS spectroscopy.After careful examination of 3387single particles,the results showed that Fe should be one of the most frequent metal elements.The Fe-containing single particles in irregular shape and micrometer size was about7.8%and might be mainly from local sources.Meanwhile,the Fe was located on the subsurface of single particles and might be existed in the form of iron oxide.Interestingly,the core-shell structure of iron-containing particles were about 38.8%and might be present as single-,dual-or triple-core shell structure and multi-core shell structure with the Fe/Si ratios of 17.5,10.5,2.9 and 1.2,respectively.Meanwhile,iron and manganese were found to coexist with identical distributions in the single particles,which might induce a synergistic effect between iron and manganese in catalytic oxidation.Finally,the solid spherical structure of Fe-containing particles without an external layer were about 53.4%.The elements of Fe and Mn were co-existed,and might be presented as iron oxide-manganese oxide-silica composite.Moreover,the ferrous and ferric forms of iron might be co-existed.Such information can be valuable in expanding our understanding of Fe-containing particles in the Tibetan Plateau atmosphere.

A simple formula for predicting settling velocity of sediment particles

Based on the general relationship described by Cheng between the drag coefficient and the Reynolds number of a particle, a new relationship between the Reynolds number and a dimensionless particle parameter is proposed. Using a trial-and-error procedure to minimize errors, the coefficients were determined and a formula was developed for predicting the settling velocity of natural sediment particles. This formula has higher prediction accuracy than other published formulas and it is applicable to all Reynolds numbers less than 2× 10^5.

Effect of Mg-based spherical quasicrystal on microstructures and mechanical properties of ZA54 alloy

To improve the strength, toughness and heat-resistance of magnesium alloy, the microstrucmre and mechanical properties of ZA54 alloy reinforced by icosahedral quasicrystal phase （/-phase） particles were studied. Except α-Mg, φ-phase and τ-phase, MgZnYMn I-phase particles can be obtained in ZA54-based composites by the addition of icosahedral quasicrystal-contained Mg-Zn-Y-Mn master alloy. The introduction of MgZnYMn I-phase into ZA54 alloy has great contribution to the refinement of matrix microstructures and the improvement of mechanical properties. When the addition of Mg-based spherical quasicrystal master alloy is up to 3.5% （mass fraction）, the macro-hardness of ZA54-based composites is increased to HB 68. The impact toughness of composites reaches the peak value of 18.3 J/cm^2, which is about 29% higher than that of ZA54 mother alloy. The highest tensile properties at ambient and elevated temperatures with master alloy addition of 2.5% （473 K） are also obtained in ZA54-based composites with 3.5% （mass fraction） Mg-Zn-Y-Mn master alloy addition. The ultimate tensile strength of composites at ambient and elevated temperatures are 192.5 MPa and 174 MPa, which are 23.4% and 33.8% higher than that of ZA54 mother alloy, respectively. The improved mechanical properties are mainly attributed to the pinning effect of I-phase on grain boundaries.

Preparation of ZrO_2 spherical nanometer powders by emulsion processing route

ZrO2 precursor powders containing 3% Y2O3 were prepared via a single emulsion processing route and a double emulsion processing route. In both routes xylol was used as the oil phase, span-80 as the surfactant, and an aqueous solution containing zirconium or ammonia as the water phase. The calcination of the precursor powders was performed at 600 ℃ for 2 h, leading to tetragonal phase ZrO2 nanometer powders. The ZrO2 powders and the precursor powders were analyzed and characterized by means of TGA-DTA, XRD, TEM, BET and laser particle size analyser. The results indicate that xylol-span-80-water phase system contain more water phase, which to a certain extent overcomes the disadvantages of low output by emulsion route in preparing powders. The best volume ratio Vxylol∶Vspan-80∶Vwater= 95∶5∶25 leads to the attaining of powders. The special tetragonal phase powders with less agglomeration were prepared via either the single emulsion processing route or the double emulsion processing route according with the ratio. But compared to the single emulsion processing route, the powders prepared via the double emulsion processing route display smaller particles with more even size distribution, the average size of around 15 nm.

Preparation and Performance of Hollow Spherical Li4Ti5O12 Doped by Mg^2+

The microstructure and performance of Li4Ti5O12 doped by Mg prepared by hydrothermal method and solid phase method were investigated. Lithium dihydrate, magnesium acetate and tetrabutyl titanate were used as the main raw materials. This study reveals that Mg^2+ has influences on the spherical structure, crystal development of Li4Ti5O12 and the electrochemical performances. The hollow spherical structure is composed of nano-sheet structure and the nano-sheet structure can be affected by the Mg^2+ content. For Li4-xMgxTi5 O12, the sheet structure can be refined with the increment of Mg^2+ content when x value is 0-0.1 and coarsen with the increment of Mg^2+ content when x value is 0.1-0.2. The hollow spherical Li4Ti5O12 powders prepared by hydrothermal method have better performance. The optimal Mgdoped amount of hydrothermal method is 0.1. At 0.1 C, the first discharge capacity of Li3.9Mg0.1Ti5O12 prepared through hydrothermal method at 0.1 C and 10 cycles is 182 and 178 mA hg^-1, respectively.