Hydrocarbons are very often associated with salt structures. The oil and gas industry is often required to drill along and through long salt sections to reach and recover hydrocarbons. The unique physical properties o...Hydrocarbons are very often associated with salt structures. The oil and gas industry is often required to drill along and through long salt sections to reach and recover hydrocarbons. The unique physical properties of salt require special techniques to ensure borehole stability and adequate casing design. This paper assumed that the mechanical behavior of salt is regulated by the magnitude of mean stress and octahedral shear stress and under the influence of different stress conditions the deformation of rock salt can be represented by three domains, i.e. compression domain, volume unchanged domain, and dilatancy domain, which are separated by a stress dependent boundary. In the compression domain, the volume of salt decreases until all microcracks are closed, with only elastic deformation and pure creep; in the volume unchanged domain the deformation is considered steady incompressible flow controlled by pure creep; and in the dilatancy domain the volume of salt increases during deformation due to micro-cracking, causing damage and accelerating ＂creep＂ until failure. This paper presents a hypothesis that the borehole is stable only when the magnitude of octahedral shear stress is below the dilatancy boundary. It gives the design method for determining drilling fluids density, and calculates the closure rate ofborehole with the recommended drilling fluids density. If the closure rate of the borehole is less than 0.1%, the drilling fluids density window can be used during drilling through extremely thick salt formations.展开更多
The Daqing oilfield is a multilayered heterogeneous oil field where the pressure are different in the same vertical profile causing many troubles to the adjustment well drillings. The approximately-balanced drilling t...The Daqing oilfield is a multilayered heterogeneous oil field where the pressure are different in the same vertical profile causing many troubles to the adjustment well drillings. The approximately-balanced drilling technique has been developed and proved to be efficient and successful in Daqing oilfield. This paper discusses the application of approximately-balanced drilling technique under the condition of multilayered pressure in Daqing oilfield, including the prediction of formation pressure, the pressure discharge technique for the drilling well and the control of the density of drilling fluid.展开更多
Rock damage appears in brittle shale even prior to peak stress(i.e.,before failure)due to the occurrence of microcracks in these rocks.In this work,a coupled hydromechanical model was built by incorporating the mechan...Rock damage appears in brittle shale even prior to peak stress(i.e.,before failure)due to the occurrence of microcracks in these rocks.In this work,a coupled hydromechanical model was built by incorporating the mechanical and fluid seepage induced stresses around a wellbore during drilling.The borehole instability mechanism of hard-brittle shale was studied.The results show that even if a well is simply drilled into a hard-brittle shale formation,the formation around the borehole can be subjected to rock damage.The maximum failure ratio of the formation around the borehole increases with drilling time.A lower drilling fluid density corresponds to a faster increase in the failure ratio of the borehole with time and a shorter period of borehole collapse.When the initial drilling fluid density is too low,serious rock damage occurs in the formation around the borehole.Even though a high-density drilling fluid is used after drilling,long-term borehole stability is difficult to maintain.While drilling in hard-brittle shale,drilling fluid with a proper density should be used rather than increasing the density of the drilling fluid only after borehole collapse occurs,which is more favorable for maintaining long-term borehole stability.展开更多
文摘Hydrocarbons are very often associated with salt structures. The oil and gas industry is often required to drill along and through long salt sections to reach and recover hydrocarbons. The unique physical properties of salt require special techniques to ensure borehole stability and adequate casing design. This paper assumed that the mechanical behavior of salt is regulated by the magnitude of mean stress and octahedral shear stress and under the influence of different stress conditions the deformation of rock salt can be represented by three domains, i.e. compression domain, volume unchanged domain, and dilatancy domain, which are separated by a stress dependent boundary. In the compression domain, the volume of salt decreases until all microcracks are closed, with only elastic deformation and pure creep; in the volume unchanged domain the deformation is considered steady incompressible flow controlled by pure creep; and in the dilatancy domain the volume of salt increases during deformation due to micro-cracking, causing damage and accelerating ＂creep＂ until failure. This paper presents a hypothesis that the borehole is stable only when the magnitude of octahedral shear stress is below the dilatancy boundary. It gives the design method for determining drilling fluids density, and calculates the closure rate ofborehole with the recommended drilling fluids density. If the closure rate of the borehole is less than 0.1%, the drilling fluids density window can be used during drilling through extremely thick salt formations.
文摘The Daqing oilfield is a multilayered heterogeneous oil field where the pressure are different in the same vertical profile causing many troubles to the adjustment well drillings. The approximately-balanced drilling technique has been developed and proved to be efficient and successful in Daqing oilfield. This paper discusses the application of approximately-balanced drilling technique under the condition of multilayered pressure in Daqing oilfield, including the prediction of formation pressure, the pressure discharge technique for the drilling well and the control of the density of drilling fluid.
基金financially supported by the National Natural Scienceof China(52074224,U1762216)the Key Research and Development Program of Shandong Province(2019GGX103025)
文摘Rock damage appears in brittle shale even prior to peak stress(i.e.,before failure)due to the occurrence of microcracks in these rocks.In this work,a coupled hydromechanical model was built by incorporating the mechanical and fluid seepage induced stresses around a wellbore during drilling.The borehole instability mechanism of hard-brittle shale was studied.The results show that even if a well is simply drilled into a hard-brittle shale formation,the formation around the borehole can be subjected to rock damage.The maximum failure ratio of the formation around the borehole increases with drilling time.A lower drilling fluid density corresponds to a faster increase in the failure ratio of the borehole with time and a shorter period of borehole collapse.When the initial drilling fluid density is too low,serious rock damage occurs in the formation around the borehole.Even though a high-density drilling fluid is used after drilling,long-term borehole stability is difficult to maintain.While drilling in hard-brittle shale,drilling fluid with a proper density should be used rather than increasing the density of the drilling fluid only after borehole collapse occurs,which is more favorable for maintaining long-term borehole stability.
