Dry storage containers must be secured and reliable during long-term storage,and the effect of decay heat released from the internal spent fuel on the cask has become an important research topic.In this paper,a 3D com...Dry storage containers must be secured and reliable during long-term storage,and the effect of decay heat released from the internal spent fuel on the cask has become an important research topic.In this paper,a 3D computational fluid dynamics model is presented,and the accuracy of the calculation is verified,with computational errors of less than 6.2%.The thermal stress of the dry storage cask was estimated by coupling it with a transient temperature field.The total power remained constant and adjusting the power ratio of the inner and outer zones had a small effect on the stress results,with a maximum equivalent stress of approximately 5.2 kPa,which occurred at the lower edge of the shell.In the case of tilt,the temperature gradient varied in a wavy distribution,and the wave crest moved from right to left.Altering the tilt angle affects the air distribution in the annular gap,leading to the shell temperature being transformed,with a maximum equivalent stress of 202 MPa at the bottom of the shell.However,the equivalent stress in both cases was less than the yield stress(205 MPa).展开更多
To aid the United States Nuclear Regulatory Commission,Sandia National Laboratories (SNL) was contracted to investigate the seismic behavior of typical dry cask storage systems. Parametric evaluations characterized th...To aid the United States Nuclear Regulatory Commission,Sandia National Laboratories (SNL) was contracted to investigate the seismic behavior of typical dry cask storage systems. Parametric evaluations characterized the sensitivity of calculated cask response characteristics to input parameters. The parametric evaluation investigated two generic cask designs (cylindrical and rectangular),three different foundation types (soft soil,hard soil,and rock),and three different casks to pad coefficients of friction (0.2,0.55,0.8) for earthquakes with peak ground accelerations of 0.25g,0.6g,1.0g and 1.25g. A total of 1 165 analyses were completed,with regression analyses being performed on the resulting cask response data to determine relationships relating the mean (16 % and 84 % confidence intervals on the mean) to peak ground acceleration,peak ground velocity,and pseudo-spectral acceleration at 1 Hz and 5 % damping. In general,the cylindrical casks experienced significantly larger responses in comparison to the rectangular cask. The cylindrical cask experienced larger top of cask displacements,larger cask rotations (rocking),and more occurrences of cask toppling (the rectangular cask never toppled over). The cylindrical cask was also susceptible to rolling once rocking had been initiated,a behavior not observed in the rectangular cask. Cask response was not overly sensitive to foundation type,but was significantly dependent on the response spectrum employed.展开更多
Experience of operating reactor facilities (RF) with lead-bismuth coolant (LBC) has revealed that it is possible to perform safe refueling in short terms if the whole core is replaced and a kit of the special refuelin...Experience of operating reactor facilities (RF) with lead-bismuth coolant (LBC) has revealed that it is possible to perform safe refueling in short terms if the whole core is replaced and a kit of the special refueling equipment is used. However, comparing with RFs of nuclear submarines (NS), in which at the moment of performance of refueling the residual heat release is small, at RF SVBR-100 in a month after the reactor has been shut down, at the moment of performance of refueling the residual heat release is about 500 kW. Therefore, it is required to place the spent removable unit (SRU) with spent fuel subassemblies (SFSA) into the temporal storage tank (TST) filled with liquid LBC, in which the conditions for coolant natural circulation (NC) and heat removal via the tank vessel to the water cooling system are provided. After the residual heat release has been lowered to the level allowing transportation of the TST with SRU in the transporting-package container (TPC), it is proposed to consider a variant of TPCs transportation to the special site. On that site after the SRU has been reloaded into the long storage tank (LST) filled with quickly solidifying liquid lead, the TPCs can be stored during the necessary period. Thus, the controlled storage of LSTs is realized during several decades untill the time when SNF reprocessing and NFC closing are becoming economically expedient. On that storage, the four safety barriers are formed on the way of the release of radioactive products into the environment, namely: fuel matrix, fuel element cladding, solid lead and steel casing of the LST.展开更多
基金the High-Performance Computing Center of Nanjing Tech University for supporting the computational resources
文摘Dry storage containers must be secured and reliable during long-term storage,and the effect of decay heat released from the internal spent fuel on the cask has become an important research topic.In this paper,a 3D computational fluid dynamics model is presented,and the accuracy of the calculation is verified,with computational errors of less than 6.2%.The thermal stress of the dry storage cask was estimated by coupling it with a transient temperature field.The total power remained constant and adjusting the power ratio of the inner and outer zones had a small effect on the stress results,with a maximum equivalent stress of approximately 5.2 kPa,which occurred at the lower edge of the shell.In the case of tilt,the temperature gradient varied in a wavy distribution,and the wave crest moved from right to left.Altering the tilt angle affects the air distribution in the annular gap,leading to the shell temperature being transformed,with a maximum equivalent stress of 202 MPa at the bottom of the shell.However,the equivalent stress in both cases was less than the yield stress(205 MPa).
文摘To aid the United States Nuclear Regulatory Commission,Sandia National Laboratories (SNL) was contracted to investigate the seismic behavior of typical dry cask storage systems. Parametric evaluations characterized the sensitivity of calculated cask response characteristics to input parameters. The parametric evaluation investigated two generic cask designs (cylindrical and rectangular),three different foundation types (soft soil,hard soil,and rock),and three different casks to pad coefficients of friction (0.2,0.55,0.8) for earthquakes with peak ground accelerations of 0.25g,0.6g,1.0g and 1.25g. A total of 1 165 analyses were completed,with regression analyses being performed on the resulting cask response data to determine relationships relating the mean (16 % and 84 % confidence intervals on the mean) to peak ground acceleration,peak ground velocity,and pseudo-spectral acceleration at 1 Hz and 5 % damping. In general,the cylindrical casks experienced significantly larger responses in comparison to the rectangular cask. The cylindrical cask experienced larger top of cask displacements,larger cask rotations (rocking),and more occurrences of cask toppling (the rectangular cask never toppled over). The cylindrical cask was also susceptible to rolling once rocking had been initiated,a behavior not observed in the rectangular cask. Cask response was not overly sensitive to foundation type,but was significantly dependent on the response spectrum employed.
文摘Experience of operating reactor facilities (RF) with lead-bismuth coolant (LBC) has revealed that it is possible to perform safe refueling in short terms if the whole core is replaced and a kit of the special refueling equipment is used. However, comparing with RFs of nuclear submarines (NS), in which at the moment of performance of refueling the residual heat release is small, at RF SVBR-100 in a month after the reactor has been shut down, at the moment of performance of refueling the residual heat release is about 500 kW. Therefore, it is required to place the spent removable unit (SRU) with spent fuel subassemblies (SFSA) into the temporal storage tank (TST) filled with liquid LBC, in which the conditions for coolant natural circulation (NC) and heat removal via the tank vessel to the water cooling system are provided. After the residual heat release has been lowered to the level allowing transportation of the TST with SRU in the transporting-package container (TPC), it is proposed to consider a variant of TPCs transportation to the special site. On that site after the SRU has been reloaded into the long storage tank (LST) filled with quickly solidifying liquid lead, the TPCs can be stored during the necessary period. Thus, the controlled storage of LSTs is realized during several decades untill the time when SNF reprocessing and NFC closing are becoming economically expedient. On that storage, the four safety barriers are formed on the way of the release of radioactive products into the environment, namely: fuel matrix, fuel element cladding, solid lead and steel casing of the LST.
