Research on the Dual Carbon Talent Training Model for the Construction Engineering Technology Major in Higher Vocational Education

Against the backdrop of global climate change and China’s“dual carbon”goals,the green transformation of the construction industry is imperative,and completing the transformation requires many dual carbon talents to support it.This article focuses on the construction engineering technology major in higher vocational education.It explores in depth the specific requirements for construction engineering technology talents in terms of professional knowledge,vocational skills,and literacy under the dual carbon mode.Based on this,corresponding dual carbon talent training courses are proposed,aiming to provide theoretical support and practical guidance for cultivating high-quality dual carbon talents that meet the needs of the new era.

基于Dual-Mode MCMA+DD双模式盲均衡算法研究

为了兼顾误差性能和收敛速度,研究了将双模修正常量模算法和判决引导算法有机结合的双模式盲均衡算法.该算法在收敛初期采用双模修正常量模算法调整均衡器,然后根据判决条件自动切换到判决引导算法,最终实现信道的盲均衡.仿真结果表明:此算法收敛速度快、稳态误差小,并能在去除码间干扰的同时纠正信道固有的相位旋转,具有很好的实用性.

基于Dual-Mode MMA+MDD双模式T/2分数间隔盲均衡算法的研究

均衡技术是用来解决通信系统中码间干扰的常用方法.针对传统恒模算法的收敛速度和稳态剩余码间干扰大的缺点,将双模式多模算法和改进型判决引导算法结合起来,并且应用于分数间隔盲均衡器中.该算法初期用双模式算法收敛均衡器,然后切换到改进型判决引导算法中进一步收敛,由于分数间隔均衡器解决了波特间隔均衡器因抽样率不高带来的频谱混叠问题,从而进一步地提高了均衡效果.蒙特卡罗仿真表明,该算法不仅收敛速度快,而且得到较低的剩余码间干扰.

Mode switching control strategy of dual motors coupled driving on electric vehicles

Based on analyzing the structure and working principle on electric vehicles （EVs） with dual motors coupled by planetarY gears, the control strategy of mode switching was proposed. The power interruption problem on EVs with automatic mechanical transmission （AMT） shifting was resolved. Based on the speed-torque characteristics of the planetary gears and the principle of the auxiliary motor＇ s zero speed braking, control features of mode switching were introduced. The mode shifting between the main motor mode and dual motors coupled driving were studied. Matlab/Simulink was adopted as a platform to develop the simulation model of EVs with dual motors drive system and 3 gears AMT. Simulation results demonstrated that the power interruption of dual motors drive system was solved during mode switching. The power requirements of EVs were satisfied, too.

SINGULAR ANALYSIS OF BIFURCATION OF NONLINEAR NORMAL MODES FOR A CLASS OF SYSTEMS WITH DUAL INTERNAL RESONANCES

The nonlinear normal modes (NNMs) associated with integrnal resonance can be classified into two kinds: uncoupled and coupled. The bifurcation problem of the coupled NNM of system with 1 : 2 : 5 dual internal resonance is in two variables. The singular analysis of it is presented after separating the two variables by taking advantage of Maple algebra, and some new bifurcation patterns are found. Different from the NNMs of systems with single internal resonance, the number of the NNMs of systems with dual internal resonance may be more or less than the number of the degrees of freedom. At last, it is pointed out that bifurcation problems in two variables can be conveniently solved by separating variables as well as using coupling equations.

Modeling of Ad-hoc and Infrastructure Dual Mode Mobile Networks

This paper investigates a mobile telecommunications system that supports both ad hoc and infrastructure mode operations. Based on analytic and simulation models, our study investigates how base station (BS) and ad hoc channel capacity, and the mobility and locality of mobile stations affect the performance of a dual mode system. We show that a dual mode system can significantly outperform a single mode (infrastructure) system when the degree of locality is high. Furthermore, a dual mode system can support much faster mobile users with less BS channels in comparison to an infrastructure mode system. Our study quantitatively identifies the threshold value for the number of ad hoc channels such that beyond this threshold, increasing ad hoc channel capacity will not improve the performance of a dual mode system. Keywords Ad-hoc - infrastructure - dual mode system Yi-Hung Chen received B.S. degree in 2001 and M.S. degree in 2003 of Computer Science and Information Engineering from National Chiao Tung University, HsinChu, Taiwan. He is an engineer of QUALCOMM CDMA technologies Taiwan.His research interests include wireless communication and ad-hoc networking.Hui-Nien Hung received the B.S. degree in mathematics from the National Taiwan University, Taipei, Taiwan, in 1989, the M.S. in mathematics degree from National Tsin-Hua University, Hsinchu, Taiwan, in 1991, and the Ph.D. degree in statistics from the University of Chicago, Chicago, IL, in 1996. He is a Professor at the Institute of Statistics, National Chiao Tung University, Taiwan.His current research interests include applied probability, financial calculus, bioinformatics, statistical inference, statistical computing, and industrial statistics. Yi-Bing Lin (M’96-SM’96-F’04) is Chair Professor and Vice President of Research and Development, National Chiao Tung University.His current research interests include wireless communications and mobile computing Dr. Lin has published over 190 journal articles and more than 200 conference papers. His current research interests include wireless communications and mobile computing Dr. Lin has published over 190 journal articles and more than 200 conference papers. Lin is coauthor of the book Wireless and Mobile Network Architecture (with Imrich Chlamtac; published by John Wiley & Sons). Lin is an IEEE Fellow, an ACM Fellow, an AAAS Fellow, and an IEE Fellow.

Review of low timing jitter mode-locked fiber lasers and applications in dual-comb absolute distance measurement

Passively mode-locked fiber lasers emit femtosecond pulse trains with excellent short-term stability. The quantum-limited timing jitter of a free running femtosecond erbium-doped fiber laser working at room temperature is considerably below one femtosecond at high Fourier frequency. The ultrashort pulse train with ultralow timing jitter enables absolute time-of-flight measurements based on a dual-comb implementation, which is typically composed of a pair of optical frequency combs generated by femtosecond lasers. Dead-zone-free absolute distance measurement with sub-micrometer precision and kHz update rate has been routinely achieved with a dual-comb configuration, which is promising for a number of precision manufacturing applications, from large step-structure measurements prevalent in microelectronic profilometry to three coordinate measurements in large-scale aerospace manufacturing and shipbuilding. In this paper, we first review the sub-femtosecond precision timing jitter characterization methods and approaches for ultralow timing jitter mode-locked fiber laser design. Then, we provide an overview of the state-of-the-art dual-comb absolute ranging technology in terms of working principles, experimental implementations, and measurement precisions. Finally, we discuss the impact of quantum-limited timing jitter on the dual-comb ranging precision at a high update rate. The route to highprecision dual-comb range finder design based on ultralow jitter femtosecond fiber lasers is proposed.

Analysis Method and Principle of Dual-mode Electro-mechanical Variable Transmission Program

Automotive industry,as an important pillar of the national economy,has been rapidly developing in recent years.But proplems such as energy comsumption and environmental pollution are posed at the same time.Electro-mechanical variable transmission system is considered one of avilable workarounds.It is brought forward a kind of design methods of dual-mode electro-mechanical variable transmission system rotational speed characteristics and dual-mode drive diagrams.With the motor operating behavior of running in four quadrants and the speed characteristics of the simple internal and external meshing single planetary gear train,four kinds of dual-mode electro-mechanical transmission system scheme are designed.And the velocity,torque and power characteristics of one of the programs are analyzed.The magnitude of the electric split-flow power is an important factor which influences the system performance,so in the parameters matching design,it needs to reduce the power needs under the first mode of the motor.The motor,output rotational speed range and the position of the mode switching point have relationships with the characteristics design of the planetary gear set.The analysis method is to provide a reference for hybrid vehicles＇ design.As the involved rotational speed and torque relationships are the natural contact of every part of transmission system,a theory basis of system program and performance analysis is provided.

Dual-mode Nonlinear MPC via Terminal Control Laws With Free-parameters

The paper presents a new dual-mode nonlinear model predictive control(NMPC) scheme for continuous-time nonlinear systems subject to constraints on the state and control.The idea of control Lyapunov functions for nonlinear systems is used to compute the terminal regions and terminal control laws with some free-parameters in the dual-mode NMPC framework.The parameters of the terminal controller are selected offline to estimate the terminal region as large as possible;and the parameters are optimized online to gain optimality of the terminal controller with respect to given cost functions.Then a dual-mode NMPC algorithm with varying time-horizon is formulated for the constrained system.Recursive feasibility and closed-loop stability of this NMPC are established.The example of a spring-cart is used to demonstrate the advantages of the presented scheme by comparing to the dual-mode NMPC via the linear quadratic regulator(LQR) method.

Facile Approach to Synthesize Gold Nanorod@Polyacrylic Acid/Calcium Phosphate Yolk–Shell Nanoparticles for Dual-Mode Imaging and pH/NIR-Responsive Drug Delivery

A facile strategy to fabricate gold nanorod@polyacrylic acid/calcium phosphate(Au NR@-PAA/Ca P) yolk–shell nanoparticles(NPs) composed with a PAA/Ca P shell and an Au NR yolk is reported. The asobtained Au NR@PAA/Ca P yolk–shell NPs possess ultrahigh doxorubicin(DOX) loading capability(1 mg DOX/mg NPs), superior photothermal conversion property(26%)and p H/near-infrared(NIR) dual-responsive drug delivery performance. The released DOX continuously increased due to the damage of the Ca P shell at low p H values. When the DOX-loaded Au NR@PAA/Ca P yolk–shell NPs wereexposed to NIR irradiation, a burst-like drug release occurs owing to the heat produced by the Au NRs. Furthermore,Au NR@PAA/Ca P yolk–shell NPs are successfully employed for synergic dual-mode X-ray computed tomography/photoacoustic imaging and chemo-photothermal cancer therapy. Therefore, this work brings new insights for the synthesis of multifunctional nanomaterials and extends theranostic applications.

NOVEL COMPOSITE CVT SYSTEMS WITH DIVERGING AND DUAL-MODE CONVERGING POWER FLOW

A new type of composite CVT(continuously variable transmission) systemsfeatured by power flow divergence and dual-mode convergence, capable of improving CVT's efficiencyand power capacity or making AMTs(automated manual transmissions) become continuously variable, isstudied. With specific mechano-mechanical and electromechanical composite CVT systems as detailedexamples, its basic working principles are expatiated. General methods and key points in designingand realizing such systems are also analyzed and discussed.

Mode Selection Strategy of Dual Distribution Channel Based on Revenue Analysis

Within the scope of dual distribution channel(DDC)modes—ME&T-C and M-T&E-C,a game model designed for channel members was proposed.Based on this game model,the game equilibrium under both centralized and decentralized decisionmaking situations was analyzed,the channel members' and overall revenues of two modes under the same decision-making situation are compared,and the influence of demand shift coefficient to the overall and members' revenue was also studied through example analysis.Based on the comparison and analysis of the revenue yielded from the two DDC modes,it's discovered that within a certain hypothetical range,the M-T&E-C mode seems to be a better option for the manufacturer than the ME&T-C mode.Therefore,this discovery can be served as a theoretical reference for manufacturers when choosing the optimal DDC mode in real life.

DUAL MODE WIDEBAND BAND-PASS FILTER WITH NOTCHED BAND FOR COMMUNICATION SYSTEM

This paper presents a planar microstrip wideband dual mode Band-Pass Filter(BPF) from 2 GHz to 3.4 GHz with a notched band at 2.62 GHz.The dual mode band-pass filter consists of a ring resonator with two quarter-wavelength open-circuited stubs at =90o and =0o,respectively.A square perturbation stub has been put at the corner of the ring resonator to increase the narrow stopbands and improve the performance of selectivity.By using a parallel-coupled feed line,a narrow notched band is introduced at the required frequency and its Fractional BandWidth(FBW) is about 5%.The proposed filter has a narrow notched band and a wide pass-band with a sharp cutoff frequency characteristic,the attenuation rate for the sharp cutoff frequency responses is 297.17 dB/GHz(cal-culated from 1.959 GHz with-34.43 dB to 2.065 GHz with-2.93 dB) and 228.10 dB/GHz(calculated from 3.395 GHz with-2.873 dB to 3.507 GHz with-28.42 dB).This filter has the advantages of good insertion loss in both operating bands and two rejections of greater than 16 dB in the range of 1.59 GHz to 1.99 GHz and 3.49 GHz to 3.98 GHz.Having been presented in this article,the measurement results agree well with the simulation results,which validates our idea.

Magnetically-coated silica nanospheres for dual-mode imaging at low ultrasound frequency

AIM: To experimentally investigate the acoustical behavior of different dual-mode nanosized contrast agents(NPCAs) for echographic medical imaging at low ultrasound(US) frequency. METHODS: We synthesized three different nanosized structures:(1) Pure silica nanospheres(SiNSs);(2) FePt-iron oxide(FePt-IO)-coated SiNSs; and(3) IOcoated SiNSs, employing three different diameter of SiNS-core(160, 330 and 660 nm). Tissue mimicking phantoms made of agarose gel solution containing 5 mg of different NPCAs in 2 mL-Eppendorf tubes, were insonified by a commercial echographic system at three different low US pulse values(2.5, 3.5 and 4.5 MHz). The raw radiofrequency signal, backscattered from each considered NPCA containing sample, has been processed in order to calculate the US average backscatter intensity and compare the acoustic behavior of the different NPCA types. RESULTS: The highest US contrast was exhibited by pure SiNSs; FePt-IO-coated SiNSs acoustical behavior followed a similar trend of pure SiNSs with a slight difference in terms of brightness values. The acoustic response of the examined NPCAs resulted function of both SiNS diameter and US frequency. Specifically, higher US frequencies determined higher value of the backscatter for a given SiNS diameter. Frequencydependent enhancement was marked for pure SiNSs and became less remarkable for FePt-IO-coated SiNSs, whereas IO-coated SiNSs resulted almost unaffected by such frequency variations. Pure and FePt-IO-coated SiNSs evidenced an image backscatter increasing with the diameter up to 330 nm. Conversely, among the types of NPCA tested, IO-coated SiNSs showed the lowest acoustical response for each synthesized diameter and employed US frequency, although a diameter-dependent raising trend was evidenced. CONCLUSION: The US characterization of magnetically covered SiNS shows that FePt-IO, rather than IO, was the best magnetic coating for realizing NPCAs suitable for dual mode imaging of deep organs, combining US and magnetic resonance imaging.

A Dual Mode Dielectric Resonator and Its Design to Bandpass Filter

In this paper, the resonant frequency of a dual\|mode dielectric resonator is calculated using a finite difference time\|domain method. A new type of bandpass filter is designed with the calculated coupling coefficient. The filter designed in this paper has reached the design goal, verified by simulation with Ansoft HFSS.

Rectangular Microstrip Antenna Using Inductive Septums for Dual Band Operation with a New Resonant Mode

A novel rectangular microstrip antenna on conventional dielectric substrate with centrally loaded inductive septums are proposed for dual band operation. The proposed antenna has been thoroughly investigated and the results are presented in the paper. The conventional patch antenna fabricated on common substrates always resonates at its dominant TM10 mode which produces the radiation field along its broadside direction. In the present investigation, the same microstrip antenna is designed on conventional substrate with centrally located inductive septums beneath the patch, with a view to develop a new resonant mode which will produce radiation like dominant TM10 mode. The speciality of the proposed antenna is to excite a new resonant mode with good impedance bandwidth while the traditional dominant TM10 mode is kept unaltered. A thorough quantitative analysis is presented to justify the reason of generation of new resonant mode along with the traditional dominant TM10 mode. An easy and handful formulation has been established for calculation of the frequency for new resonant mode as a function of antenna parameters and the gap between the septums. The proposed idea has been verified through a commercial software package for a patch operating in C band and an excellent agreement is revealed.

Compact Narrow Band Non-Degenerate Dual-Mode Microstrip Filter with Etched Square Lattices

A compact narrowband non-degenerate dual-mode microstrip filter with square shape cuts is presented. The structure is developed by loading the conventional non-degenerate dual-mode resonator by open circuit stubs at two opposite corners. The filter bandwidth is controlled by only decreasing the higher cutoff frequency of the conventional type. With Square shape cuts, return loss is improved. A 20% fractional bandwidth filter is designed and implemented on FR4 material with 4.4 dielectric constant and 1.6 mm thickness at center frequency of 1.5 GHz with passband of 1.3 GHz to 1.6 GHz. Analysis has been achieved using the IE3D simulator. Experimental results do agree with simulations.

Dual Mode-Multiple Output SEPIC Converter Integrated with Passive Ripple Cancelling Circuit for Standalone PV Energy Harvesting System

This document addresses an exhaustive standalone Photovoltaic (PV) energy harvesting system considering two crucial issues: system efficiency and cost effectiveness. It contributes a compact resolution with a combined feature of Dual Mode-Multiple Output (DMMO) associated with input ripple reduction technique. Control strategy incorporates with aspect of Maximum Power Point Tracking (MPPT) and output voltage levels regulation. A theoretical analysis is conducted to evaluate the effect of ripple current on PV power. Proposed dual mode converter achieves efficiency of 98.36% and 97.76% respectively for mode-1 and mode-2 operation. However, simulation is performed applying MATLAB/SIMULINK tools to analyze the feasibility of the recommended system.

Effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids by using the Lord-Shulman and dual-phase-lag models

The effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids in a generalized thermoplastic half-space are studied by using the Lord-Shulman (L-S) model and the dual-phase-lag (DPL) model. The analytical solutions for the displacements, stresses, temperature, diffusion concentration, and volume fraction field with different values of the magnetic field, the rotation, the gravity, and the initial stress are obtained and portrayed graphically. The results indicate that the effects of gravity, rotation, voids, diffusion, initial stress, and electromagnetic field are very pronounced on the physical properties of the material.

The Conceptual Design Experience of Sea-Going Ships with Alternative Propulsion System, Equipped with Dual-Mode Contra Propeller

The paper presents a technical solution which provides energy saving at full speed, as well as duplication of screw propeller and main propulsion system incase it＇s out of order. The description of the corresponding device, designed for transport refrigerator ship, is shown as well as its location on board. Value of energy saving from the use of contra propeller is estimated. The results of the assessment required power to move the ship at low speed by the action of the contra propeller operating in the reactive mode are demonstrated. It is shown, that the ship equipped with the proposed device will get the additional class notation related to the redundancy or duplication of the propulsion system of Russian Maritime Register of Shipping.